blob: da5af6efe4c0d827c8cccaac572436b503ff8920 [file] [log] [blame]
wdenk232c1502004-03-12 00:14:09 +00001/*
2 * (C) Copyright 2003
3 * Gerry Hamel, geh@ti.com, Texas Instruments
4 *
5 * Based on linux/drivers/usbd/usbd.h
6 *
7 * Copyright (c) 2000, 2001, 2002 Lineo
8 * Copyright (c) 2001 Hewlett Packard
9 *
10 * By:
11 * Stuart Lynne <sl@lineo.com>,
12 * Tom Rushworth <tbr@lineo.com>,
13 * Bruce Balden <balden@lineo.com>
14 *
Wolfgang Denk1a459662013-07-08 09:37:19 +020015 * SPDX-License-Identifier: GPL-2.0+
wdenk232c1502004-03-12 00:14:09 +000016 */
17
18#ifndef __USBDCORE_H__
19#define __USBDCORE_H__
20
21#include <common.h>
22#include "usbdescriptors.h"
23
24
25#define MAX_URBS_QUEUED 5
26
27
28#if 1
29#define usberr(fmt,args...) serial_printf("ERROR: %s(), %d: "fmt"\n",__FUNCTION__,__LINE__,##args)
30#else
31#define usberr(fmt,args...) do{}while(0)
32#endif
33
34#if 0
35#define usbdbg(fmt,args...) serial_printf("debug: %s(), %d: "fmt"\n",__FUNCTION__,__LINE__,##args)
36#else
37#define usbdbg(fmt,args...) do{}while(0)
38#endif
39
40#if 0
41#define usbinfo(fmt,args...) serial_printf("info: %s(), %d: "fmt"\n",__FUNCTION__,__LINE__,##args)
42#else
43#define usbinfo(fmt,args...) do{}while(0)
44#endif
45
46#ifndef le16_to_cpu
47#define le16_to_cpu(x) (x)
48#endif
49
50#ifndef inb
51#define inb(p) (*(volatile u8*)(p))
52#endif
53
54#ifndef outb
55#define outb(val,p) (*(volatile u8*)(p) = (val))
56#endif
57
58#ifndef inw
59#define inw(p) (*(volatile u16*)(p))
60#endif
61
62#ifndef outw
63#define outw(val,p) (*(volatile u16*)(p) = (val))
64#endif
65
66#ifndef inl
67#define inl(p) (*(volatile u32*)(p))
68#endif
69
70#ifndef outl
71#define outl(val,p) (*(volatile u32*)(p) = (val))
72#endif
73
74#ifndef insw
75#define insw(p,to,len) mmio_insw(p,to,len)
76#endif
77
78#ifndef outsw
79#define outsw(p,from,len) mmio_outsw(p,from,len)
80#endif
81
82#ifndef insb
83#define insb(p,to,len) mmio_insb(p,to,len)
84#endif
85
86#ifndef mmio_insw
87#define mmio_insw(r,b,l) ({ int __i ; \
88 u16 *__b2; \
89 __b2 = (u16 *) b; \
90 for (__i = 0; __i < l; __i++) { \
91 *(__b2 + __i) = inw(r); \
92 }; \
93 })
94#endif
95
96#ifndef mmio_outsw
97#define mmio_outsw(r,b,l) ({ int __i; \
98 u16 *__b2; \
99 __b2 = (u16 *) b; \
100 for (__i = 0; __i < l; __i++) { \
101 outw( *(__b2 + __i), r); \
102 } \
103 })
104#endif
105
106#ifndef mmio_insb
107#define mmio_insb(r,b,l) ({ int __i ; \
108 u8 *__b2; \
109 __b2 = (u8 *) b; \
110 for (__i = 0; __i < l; __i++) { \
111 *(__b2 + __i) = inb(r); \
112 }; \
113 })
114#endif
115
wdenk232c1502004-03-12 00:14:09 +0000116/*
117 * Structure member address manipulation macros.
118 * These are used by client code (code using the urb_link routines), since
119 * the urb_link structure is embedded in the client data structures.
120 *
121 * Note: a macro offsetof equivalent to member_offset is defined in stddef.h
122 * but this is kept here for the sake of portability.
123 *
124 * p2surround returns a pointer to the surrounding structure given
125 * type of the surrounding structure, the name memb of the structure
126 * member pointed at by ptr. For example, if you have:
127 *
128 * struct foo {
129 * int x;
130 * float y;
131 * char z;
132 * } thingy;
133 *
134 * char *cp = &thingy.z;
135 *
136 * then
137 *
138 * &thingy == p2surround(struct foo, z, cp)
139 *
140 * Clear?
141 */
142#define _cv_(ptr) ((char*)(void*)(ptr))
143#define member_offset(type,memb) (_cv_(&(((type*)0)->memb))-(char*)0)
144#define p2surround(type,memb,ptr) ((type*)(void*)(_cv_(ptr)-member_offset(type,memb)))
145
146struct urb;
147
148struct usb_endpoint_instance;
149struct usb_interface_instance;
150struct usb_configuration_instance;
151struct usb_device_instance;
152struct usb_bus_instance;
153
154/*
155 * Device and/or Interface Class codes
156 */
157#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
158#define USB_CLASS_AUDIO 1
159#define USB_CLASS_COMM 2
160#define USB_CLASS_HID 3
161#define USB_CLASS_PHYSICAL 5
162#define USB_CLASS_PRINTER 7
163#define USB_CLASS_MASS_STORAGE 8
164#define USB_CLASS_HUB 9
165#define USB_CLASS_DATA 10
166#define USB_CLASS_APP_SPEC 0xfe
167#define USB_CLASS_VENDOR_SPEC 0xff
168
169/*
170 * USB types
171 */
172#define USB_TYPE_STANDARD (0x00 << 5)
173#define USB_TYPE_CLASS (0x01 << 5)
174#define USB_TYPE_VENDOR (0x02 << 5)
175#define USB_TYPE_RESERVED (0x03 << 5)
176
177/*
178 * USB recipients
179 */
180#define USB_RECIP_DEVICE 0x00
181#define USB_RECIP_INTERFACE 0x01
182#define USB_RECIP_ENDPOINT 0x02
183#define USB_RECIP_OTHER 0x03
184
185/*
186 * USB directions
187 */
188#define USB_DIR_OUT 0
189#define USB_DIR_IN 0x80
190
191/*
192 * Descriptor types
193 */
194#define USB_DT_DEVICE 0x01
195#define USB_DT_CONFIG 0x02
196#define USB_DT_STRING 0x03
197#define USB_DT_INTERFACE 0x04
198#define USB_DT_ENDPOINT 0x05
199
Vipin KUMARf9da0f82012-03-26 15:38:06 +0530200#if defined(CONFIG_USBD_HS)
201#define USB_DT_QUAL 0x06
202#endif
203
wdenk232c1502004-03-12 00:14:09 +0000204#define USB_DT_HID (USB_TYPE_CLASS | 0x01)
205#define USB_DT_REPORT (USB_TYPE_CLASS | 0x02)
206#define USB_DT_PHYSICAL (USB_TYPE_CLASS | 0x03)
207#define USB_DT_HUB (USB_TYPE_CLASS | 0x09)
208
209/*
210 * Descriptor sizes per descriptor type
211 */
212#define USB_DT_DEVICE_SIZE 18
213#define USB_DT_CONFIG_SIZE 9
214#define USB_DT_INTERFACE_SIZE 9
215#define USB_DT_ENDPOINT_SIZE 7
216#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
217#define USB_DT_HUB_NONVAR_SIZE 7
218#define USB_DT_HID_SIZE 9
219
220/*
221 * Endpoints
222 */
223#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
224#define USB_ENDPOINT_DIR_MASK 0x80
225
226#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
227#define USB_ENDPOINT_XFER_CONTROL 0
228#define USB_ENDPOINT_XFER_ISOC 1
229#define USB_ENDPOINT_XFER_BULK 2
230#define USB_ENDPOINT_XFER_INT 3
231
232/*
233 * USB Packet IDs (PIDs)
234 */
235#define USB_PID_UNDEF_0 0xf0
236#define USB_PID_OUT 0xe1
237#define USB_PID_ACK 0xd2
238#define USB_PID_DATA0 0xc3
239#define USB_PID_PING 0xb4 /* USB 2.0 */
240#define USB_PID_SOF 0xa5
241#define USB_PID_NYET 0x96 /* USB 2.0 */
242#define USB_PID_DATA2 0x87 /* USB 2.0 */
243#define USB_PID_SPLIT 0x78 /* USB 2.0 */
244#define USB_PID_IN 0x69
245#define USB_PID_NAK 0x5a
246#define USB_PID_DATA1 0x4b
247#define USB_PID_PREAMBLE 0x3c /* Token mode */
248#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
249#define USB_PID_SETUP 0x2d
250#define USB_PID_STALL 0x1e
251#define USB_PID_MDATA 0x0f /* USB 2.0 */
252
253/*
254 * Standard requests
255 */
256#define USB_REQ_GET_STATUS 0x00
257#define USB_REQ_CLEAR_FEATURE 0x01
258#define USB_REQ_SET_FEATURE 0x03
259#define USB_REQ_SET_ADDRESS 0x05
260#define USB_REQ_GET_DESCRIPTOR 0x06
261#define USB_REQ_SET_DESCRIPTOR 0x07
262#define USB_REQ_GET_CONFIGURATION 0x08
263#define USB_REQ_SET_CONFIGURATION 0x09
264#define USB_REQ_GET_INTERFACE 0x0A
265#define USB_REQ_SET_INTERFACE 0x0B
266#define USB_REQ_SYNCH_FRAME 0x0C
267
268#define USBD_DEVICE_REQUESTS(x) (((unsigned int)x <= USB_REQ_SYNCH_FRAME) ? usbd_device_requests[x] : "UNKNOWN")
269
270/*
271 * HID requests
272 */
273#define USB_REQ_GET_REPORT 0x01
274#define USB_REQ_GET_IDLE 0x02
275#define USB_REQ_GET_PROTOCOL 0x03
276#define USB_REQ_SET_REPORT 0x09
277#define USB_REQ_SET_IDLE 0x0A
278#define USB_REQ_SET_PROTOCOL 0x0B
279
280
281/*
282 * USB Spec Release number
283 */
284
Vipin KUMARf9da0f82012-03-26 15:38:06 +0530285#if defined(CONFIG_USBD_HS)
286#define USB_BCD_VERSION 0x0200
287#else
wdenk232c1502004-03-12 00:14:09 +0000288#define USB_BCD_VERSION 0x0110
Vipin KUMARf9da0f82012-03-26 15:38:06 +0530289#endif
wdenk232c1502004-03-12 00:14:09 +0000290
291
292/*
293 * Device Requests (c.f Table 9-2)
294 */
295
296#define USB_REQ_DIRECTION_MASK 0x80
297#define USB_REQ_TYPE_MASK 0x60
298#define USB_REQ_RECIPIENT_MASK 0x1f
299
300#define USB_REQ_DEVICE2HOST 0x80
301#define USB_REQ_HOST2DEVICE 0x00
302
303#define USB_REQ_TYPE_STANDARD 0x00
304#define USB_REQ_TYPE_CLASS 0x20
305#define USB_REQ_TYPE_VENDOR 0x40
306
307#define USB_REQ_RECIPIENT_DEVICE 0x00
308#define USB_REQ_RECIPIENT_INTERFACE 0x01
309#define USB_REQ_RECIPIENT_ENDPOINT 0x02
310#define USB_REQ_RECIPIENT_OTHER 0x03
311
312/*
313 * get status bits
314 */
315
316#define USB_STATUS_SELFPOWERED 0x01
317#define USB_STATUS_REMOTEWAKEUP 0x02
318
319#define USB_STATUS_HALT 0x01
320
321/*
322 * descriptor types
323 */
324
325#define USB_DESCRIPTOR_TYPE_DEVICE 0x01
326#define USB_DESCRIPTOR_TYPE_CONFIGURATION 0x02
327#define USB_DESCRIPTOR_TYPE_STRING 0x03
328#define USB_DESCRIPTOR_TYPE_INTERFACE 0x04
329#define USB_DESCRIPTOR_TYPE_ENDPOINT 0x05
330#define USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER 0x06
331#define USB_DESCRIPTOR_TYPE_OTHER_SPEED_CONFIGURATION 0x07
332#define USB_DESCRIPTOR_TYPE_INTERFACE_POWER 0x08
333#define USB_DESCRIPTOR_TYPE_HID 0x21
334#define USB_DESCRIPTOR_TYPE_REPORT 0x22
335
336#define USBD_DEVICE_DESCRIPTORS(x) (((unsigned int)x <= USB_DESCRIPTOR_TYPE_INTERFACE_POWER) ? \
337 usbd_device_descriptors[x] : "UNKNOWN")
338
339/*
340 * standard feature selectors
341 */
342#define USB_ENDPOINT_HALT 0x00
343#define USB_DEVICE_REMOTE_WAKEUP 0x01
344#define USB_TEST_MODE 0x02
345
346
347/* USB Requests
348 *
349 */
350
351struct usb_device_request {
352 u8 bmRequestType;
353 u8 bRequest;
354 u16 wValue;
355 u16 wIndex;
356 u16 wLength;
357} __attribute__ ((packed));
358
359
360/* USB Status
361 *
362 */
363typedef enum urb_send_status {
364 SEND_IN_PROGRESS,
365 SEND_FINISHED_OK,
366 SEND_FINISHED_ERROR,
367 RECV_READY,
368 RECV_OK,
369 RECV_ERROR
370} urb_send_status_t;
371
372/*
373 * Device State (c.f USB Spec 2.0 Figure 9-1)
374 *
375 * What state the usb device is in.
376 *
377 * Note the state does not change if the device is suspended, we simply set a
378 * flag to show that it is suspended.
379 *
380 */
381typedef enum usb_device_state {
382 STATE_INIT, /* just initialized */
383 STATE_CREATED, /* just created */
384 STATE_ATTACHED, /* we are attached */
385 STATE_POWERED, /* we have seen power indication (electrical bus signal) */
386 STATE_DEFAULT, /* we been reset */
387 STATE_ADDRESSED, /* we have been addressed (in default configuration) */
388 STATE_CONFIGURED, /* we have seen a set configuration device command */
389 STATE_UNKNOWN, /* destroyed */
390} usb_device_state_t;
391
392#define USBD_DEVICE_STATE(x) (((unsigned int)x <= STATE_UNKNOWN) ? usbd_device_states[x] : "UNKNOWN")
393
394/*
395 * Device status
396 *
397 * Overall state
398 */
399typedef enum usb_device_status {
400 USBD_OPENING, /* we are currently opening */
401 USBD_OK, /* ok to use */
402 USBD_SUSPENDED, /* we are currently suspended */
403 USBD_CLOSING, /* we are currently closing */
404} usb_device_status_t;
405
406#define USBD_DEVICE_STATUS(x) (((unsigned int)x <= USBD_CLOSING) ? usbd_device_status[x] : "UNKNOWN")
407
408/*
409 * Device Events
410 *
411 * These are defined in the USB Spec (c.f USB Spec 2.0 Figure 9-1).
412 *
413 * There are additional events defined to handle some extra actions we need
414 * to have handled.
415 *
416 */
417typedef enum usb_device_event {
418
419 DEVICE_UNKNOWN, /* bi - unknown event */
420 DEVICE_INIT, /* bi - initialize */
421 DEVICE_CREATE, /* bi - */
422 DEVICE_HUB_CONFIGURED, /* bi - bus has been plugged int */
423 DEVICE_RESET, /* bi - hub has powered our port */
424
425 DEVICE_ADDRESS_ASSIGNED, /* ep0 - set address setup received */
426 DEVICE_CONFIGURED, /* ep0 - set configure setup received */
427 DEVICE_SET_INTERFACE, /* ep0 - set interface setup received */
428
429 DEVICE_SET_FEATURE, /* ep0 - set feature setup received */
430 DEVICE_CLEAR_FEATURE, /* ep0 - clear feature setup received */
431
432 DEVICE_DE_CONFIGURED, /* ep0 - set configure setup received for ?? */
433
434 DEVICE_BUS_INACTIVE, /* bi - bus in inactive (no SOF packets) */
435 DEVICE_BUS_ACTIVITY, /* bi - bus is active again */
436
437 DEVICE_POWER_INTERRUPTION, /* bi - hub has depowered our port */
438 DEVICE_HUB_RESET, /* bi - bus has been unplugged */
439 DEVICE_DESTROY, /* bi - device instance should be destroyed */
440
441 DEVICE_HOTPLUG, /* bi - a hotplug event has occured */
442
443 DEVICE_FUNCTION_PRIVATE, /* function - private */
444
445} usb_device_event_t;
446
447
448typedef struct urb_link {
449 struct urb_link *next;
450 struct urb_link *prev;
451} urb_link;
452
453/* USB Data structure - for passing data around.
454 *
455 * This is used for both sending and receiving data.
456 *
457 * The callback function is used to let the function driver know when
458 * transmitted data has been sent.
459 *
460 * The callback function is set by the alloc_recv function when an urb is
461 * allocated for receiving data for an endpoint and used to call the
462 * function driver to inform it that data has arrived.
463 */
464
Shiraz Hashimb2caefb2012-12-17 14:19:37 +0530465/* in linux we'd malloc this, but in u-boot we prefer static data */
466#define URB_BUF_SIZE 512
467
wdenk232c1502004-03-12 00:14:09 +0000468struct urb {
469
470 struct usb_endpoint_instance *endpoint;
471 struct usb_device_instance *device;
472
473 struct usb_device_request device_request; /* contents of received SETUP packet */
474
475 struct urb_link link; /* embedded struct for circular doubly linked list of urbs */
476
477 u8* buffer;
478 unsigned int buffer_length;
479 unsigned int actual_length;
480
481 urb_send_status_t status;
482 int data;
483
484 u16 buffer_data[URB_BUF_SIZE]; /* data received (OUT) or being sent (IN) */
485};
486
487/* Endpoint configuration
488 *
489 * Per endpoint configuration data. Used to track which function driver owns
490 * an endpoint.
491 *
492 */
493struct usb_endpoint_instance {
494 int endpoint_address; /* logical endpoint address */
495
496 /* control */
497 int status; /* halted */
498 int state; /* available for use by bus interface driver */
499
500 /* receive side */
501 struct urb_link rcv; /* received urbs */
502 struct urb_link rdy; /* empty urbs ready to receive */
503 struct urb *rcv_urb; /* active urb */
504 int rcv_attributes; /* copy of bmAttributes from endpoint descriptor */
505 int rcv_packetSize; /* maximum packet size from endpoint descriptor */
506 int rcv_transferSize; /* maximum transfer size from function driver */
507 int rcv_queue;
508
509 /* transmit side */
510 struct urb_link tx; /* urbs ready to transmit */
511 struct urb_link done; /* transmitted urbs */
512 struct urb *tx_urb; /* active urb */
513 int tx_attributes; /* copy of bmAttributes from endpoint descriptor */
514 int tx_packetSize; /* maximum packet size from endpoint descriptor */
515 int tx_transferSize; /* maximum transfer size from function driver */
516 int tx_queue;
517
518 int sent; /* data already sent */
519 int last; /* data sent in last packet XXX do we need this */
520};
521
522struct usb_alternate_instance {
523 struct usb_interface_descriptor *interface_descriptor;
524
525 int endpoints;
526 int *endpoint_transfersize_array;
527 struct usb_endpoint_descriptor **endpoints_descriptor_array;
528};
529
530struct usb_interface_instance {
531 int alternates;
532 struct usb_alternate_instance *alternates_instance_array;
533};
534
535struct usb_configuration_instance {
536 int interfaces;
537 struct usb_configuration_descriptor *configuration_descriptor;
538 struct usb_interface_instance *interface_instance_array;
539};
540
541
542/* USB Device Instance
543 *
544 * For each physical bus interface we create a logical device structure. This
545 * tracks all of the required state to track the USB HOST's view of the device.
546 *
547 * Keep track of the device configuration for a real physical bus interface,
548 * this includes the bus interface, multiple function drivers, the current
549 * configuration and the current state.
550 *
551 * This will show:
552 * the specific bus interface driver
553 * the default endpoint 0 driver
554 * the configured function driver
555 * device state
556 * device status
557 * endpoint list
558 */
559
560struct usb_device_instance {
561
562 /* generic */
563 char *name;
564 struct usb_device_descriptor *device_descriptor; /* per device descriptor */
Vipin KUMARf9da0f82012-03-26 15:38:06 +0530565#if defined(CONFIG_USBD_HS)
566 struct usb_qualifier_descriptor *qualifier_descriptor;
567#endif
wdenk232c1502004-03-12 00:14:09 +0000568
569 void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data);
570
Wolfgang Denk16c8d5e2006-06-14 17:45:53 +0200571 /* Do cdc device specific control requests */
572 int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb);
573
wdenk232c1502004-03-12 00:14:09 +0000574 /* bus interface */
575 struct usb_bus_instance *bus; /* which bus interface driver */
576
577 /* configuration descriptors */
578 int configurations;
579 struct usb_configuration_instance *configuration_instance_array;
580
581 /* device state */
582 usb_device_state_t device_state; /* current USB Device state */
583 usb_device_state_t device_previous_state; /* current USB Device state */
584
585 u8 address; /* current address (zero is default) */
586 u8 configuration; /* current show configuration (zero is default) */
587 u8 interface; /* current interface (zero is default) */
588 u8 alternate; /* alternate flag */
589
590 usb_device_status_t status; /* device status */
591
592 int urbs_queued; /* number of submitted urbs */
593
594 /* Shouldn't need to make this atomic, all we need is a change indicator */
595 unsigned long usbd_rxtx_timestamp;
596 unsigned long usbd_last_rxtx_timestamp;
597
598};
599
600/* Bus Interface configuration structure
601 *
602 * This is allocated for each configured instance of a bus interface driver.
603 *
604 * The privdata pointer may be used by the bus interface driver to store private
605 * per instance state information.
606 */
607struct usb_bus_instance {
608
609 struct usb_device_instance *device;
610 struct usb_endpoint_instance *endpoint_array; /* array of available configured endpoints */
611
612 int max_endpoints; /* maximimum number of rx enpoints */
613 unsigned char maxpacketsize;
614
615 unsigned int serial_number;
616 char *serial_number_str;
617 void *privdata; /* private data for the bus interface */
618
619};
620
621extern char *usbd_device_events[];
622extern char *usbd_device_states[];
623extern char *usbd_device_status[];
624extern char *usbd_device_requests[];
625extern char *usbd_device_descriptors[];
626
627void urb_link_init (urb_link * ul);
628void urb_detach (struct urb *urb);
629urb_link *first_urb_link (urb_link * hd);
630struct urb *first_urb (urb_link * hd);
631struct urb *first_urb_detached (urb_link * hd);
632void urb_append (urb_link * hd, struct urb *urb);
633
634struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct usb_endpoint_instance *endpoint);
635void usbd_dealloc_urb (struct urb *urb);
636
637/*
638 * usbd_device_event is used by bus interface drivers to tell the higher layers that
639 * certain events have taken place.
640 */
641void usbd_device_event_irq (struct usb_device_instance *conf, usb_device_event_t, int);
642void usbd_device_event (struct usb_device_instance *conf, usb_device_event_t, int);
643
644/* descriptors
645 *
646 * Various ways of finding descriptors based on the current device and any
647 * possible configuration / interface / endpoint for it.
648 */
649struct usb_configuration_descriptor *usbd_device_configuration_descriptor (struct usb_device_instance *, int, int);
650struct usb_function_instance *usbd_device_function_instance (struct usb_device_instance *, unsigned int);
651struct usb_interface_instance *usbd_device_interface_instance (struct usb_device_instance *, int, int, int);
652struct usb_alternate_instance *usbd_device_alternate_instance (struct usb_device_instance *, int, int, int, int);
653struct usb_interface_descriptor *usbd_device_interface_descriptor (struct usb_device_instance *, int, int, int, int);
654struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor_index (struct usb_device_instance *, int, int, int, int, int);
655struct usb_class_descriptor *usbd_device_class_descriptor_index (struct usb_device_instance *, int, int, int, int, int);
656struct usb_class_report_descriptor *usbd_device_class_report_descriptor_index( struct usb_device_instance *, int , int , int , int , int );
657struct usb_endpoint_descriptor *usbd_device_endpoint_descriptor (struct usb_device_instance *, int, int, int, int, int);
658int usbd_device_endpoint_transfersize (struct usb_device_instance *, int, int, int, int, int);
659struct usb_string_descriptor *usbd_get_string (u8);
Vipin KUMARf9da0f82012-03-26 15:38:06 +0530660struct usb_device_descriptor *usbd_device_device_descriptor(struct
661 usb_device_instance *, int);
wdenk232c1502004-03-12 00:14:09 +0000662
Vipin KUMARf9da0f82012-03-26 15:38:06 +0530663#if defined(CONFIG_USBD_HS)
664/*
665 * is_usbd_high_speed routine needs to be defined by specific gadget driver
York Sun472d5462013-04-01 11:29:11 -0700666 * It returns true if device enumerates at High speed
667 * Retuns false otherwise
Vipin KUMARf9da0f82012-03-26 15:38:06 +0530668 */
669int is_usbd_high_speed(void);
670#endif
wdenk232c1502004-03-12 00:14:09 +0000671int usbd_endpoint_halted (struct usb_device_instance *device, int endpoint);
672void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad);
673void usbd_tx_complete (struct usb_endpoint_instance *endpoint);
674
Tom Rix988365a2009-10-31 12:37:39 -0500675/* These are macros used in debugging */
676#ifdef DEBUG
677static inline void print_urb(struct urb *u)
678{
679 serial_printf("urb %p\n", (u));
680 serial_printf("\tendpoint %p\n", u->endpoint);
681 serial_printf("\tdevice %p\n", u->device);
682 serial_printf("\tbuffer %p\n", u->buffer);
683 serial_printf("\tbuffer_length %d\n", u->buffer_length);
684 serial_printf("\tactual_length %d\n", u->actual_length);
685 serial_printf("\tstatus %d\n", u->status);
686 serial_printf("\tdata %d\n", u->data);
687}
688
689static inline void print_usb_device_request(struct usb_device_request *r)
690{
691 serial_printf("usb request\n");
692 serial_printf("\tbmRequestType 0x%2.2x\n", r->bmRequestType);
693 if ((r->bmRequestType & USB_REQ_DIRECTION_MASK) == 0)
694 serial_printf("\t\tDirection : To device\n");
695 else
696 serial_printf("\t\tDirection : To host\n");
697 if ((r->bmRequestType & USB_TYPE_STANDARD) == USB_TYPE_STANDARD)
698 serial_printf("\t\tType : Standard\n");
699 if ((r->bmRequestType & USB_TYPE_CLASS) == USB_TYPE_CLASS)
700 serial_printf("\t\tType : Standard\n");
701 if ((r->bmRequestType & USB_TYPE_VENDOR) == USB_TYPE_VENDOR)
702 serial_printf("\t\tType : Standard\n");
703 if ((r->bmRequestType & USB_TYPE_RESERVED) == USB_TYPE_RESERVED)
704 serial_printf("\t\tType : Standard\n");
705 if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
706 USB_REQ_RECIPIENT_DEVICE)
707 serial_printf("\t\tRecipient : Device\n");
708 if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
709 USB_REQ_RECIPIENT_INTERFACE)
710 serial_printf("\t\tRecipient : Interface\n");
711 if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
712 USB_REQ_RECIPIENT_ENDPOINT)
713 serial_printf("\t\tRecipient : Endpoint\n");
714 if ((r->bmRequestType & USB_REQ_RECIPIENT_MASK) ==
715 USB_REQ_RECIPIENT_OTHER)
716 serial_printf("\t\tRecipient : Other\n");
717 serial_printf("\tbRequest 0x%2.2x\n", r->bRequest);
718 if (r->bRequest == USB_REQ_GET_STATUS)
719 serial_printf("\t\tGET_STATUS\n");
720 else if (r->bRequest == USB_REQ_SET_ADDRESS)
721 serial_printf("\t\tSET_ADDRESS\n");
722 else if (r->bRequest == USB_REQ_SET_FEATURE)
723 serial_printf("\t\tSET_FEATURE\n");
724 else if (r->bRequest == USB_REQ_GET_DESCRIPTOR)
725 serial_printf("\t\tGET_DESCRIPTOR\n");
726 else if (r->bRequest == USB_REQ_SET_CONFIGURATION)
727 serial_printf("\t\tSET_CONFIGURATION\n");
728 else if (r->bRequest == USB_REQ_SET_INTERFACE)
729 serial_printf("\t\tUSB_REQ_SET_INTERFACE\n");
730 else
731 serial_printf("\tUNKNOWN %d\n", r->bRequest);
732 serial_printf("\twValue 0x%4.4x\n", r->wValue);
733 if (r->bRequest == USB_REQ_GET_DESCRIPTOR) {
734 switch (r->wValue >> 8) {
735 case USB_DESCRIPTOR_TYPE_DEVICE:
736 serial_printf("\tDEVICE\n");
737 break;
738 case USB_DESCRIPTOR_TYPE_CONFIGURATION:
739 serial_printf("\tCONFIGURATION\n");
740 break;
741 case USB_DESCRIPTOR_TYPE_STRING:
742 serial_printf("\tSTRING\n");
743 break;
744 case USB_DESCRIPTOR_TYPE_INTERFACE:
745 serial_printf("\tINTERFACE\n");
746 break;
747 case USB_DESCRIPTOR_TYPE_ENDPOINT:
748 serial_printf("\tENDPOINT\n");
749 break;
750 case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
751 serial_printf("\tDEVICE_QUALIFIER\n");
752 break;
753 case USB_DESCRIPTOR_TYPE_OTHER_SPEED_CONFIGURATION:
754 serial_printf("\tOTHER_SPEED_CONFIGURATION\n");
755 break;
756 case USB_DESCRIPTOR_TYPE_INTERFACE_POWER:
757 serial_printf("\tINTERFACE_POWER\n");
758 break;
759 case USB_DESCRIPTOR_TYPE_HID:
760 serial_printf("\tHID\n");
761 break;
762 case USB_DESCRIPTOR_TYPE_REPORT:
763 serial_printf("\tREPORT\n");
764 break;
765 default:
766 serial_printf("\tUNKNOWN TYPE\n");
767 break;
768 }
769 }
770 serial_printf("\twIndex 0x%4.4x\n", r->wIndex);
771 serial_printf("\twLength 0x%4.4x\n", r->wLength);
772}
773#else
774/* stubs */
775#define print_urb(u)
776#define print_usb_device_request(r)
777#endif /* DEBUG */
wdenk232c1502004-03-12 00:14:09 +0000778#endif