blob: b2d670e0edeec44bc35f30204955d0a554a95d5c [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Marek Vasutf91c09a2014-10-24 23:39:07 +02002/*
3 * Novena SPL
4 *
5 * Copyright (C) 2014 Marek Vasut <marex@denx.de>
Marek Vasutf91c09a2014-10-24 23:39:07 +02006 */
7
8#include <common.h>
9#include <asm/io.h>
10#include <asm/arch/clock.h>
11#include <asm/arch/iomux.h>
12#include <asm/arch/mx6-ddr.h>
13#include <asm/arch/mx6-pins.h>
14#include <asm/arch/sys_proto.h>
15#include <asm/gpio.h>
Stefano Babic552a8482017-06-29 10:16:06 +020016#include <asm/mach-imx/boot_mode.h>
17#include <asm/mach-imx/iomux-v3.h>
18#include <asm/mach-imx/mxc_i2c.h>
Fabio Estevam7d29acd2014-11-14 09:37:01 -020019#include <asm/arch/crm_regs.h>
Marek Vasutf91c09a2014-10-24 23:39:07 +020020#include <i2c.h>
21#include <mmc.h>
22#include <fsl_esdhc.h>
23#include <spl.h>
24
25#include <asm/arch/mx6-ddr.h>
26
Marek Vasutd59d7b92014-12-16 14:09:21 +010027#include "novena.h"
28
Marek Vasutf91c09a2014-10-24 23:39:07 +020029#define UART_PAD_CTRL \
30 (PAD_CTL_PKE | PAD_CTL_PUE | \
31 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
32 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
33
34#define USDHC_PAD_CTRL \
35 (PAD_CTL_PKE | PAD_CTL_PUE | \
36 PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
37 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
38
39#define ENET_PAD_CTRL \
40 (PAD_CTL_PKE | PAD_CTL_PUE | \
41 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
42 PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
43
Nikolay Dimitrovb99ed272014-10-12 13:47:51 +030044#define ENET_PHY_CFG_PAD_CTRL \
45 (PAD_CTL_PKE | PAD_CTL_PUE | \
46 PAD_CTL_PUS_22K_UP | PAD_CTL_HYS)
47
Marek Vasutf91c09a2014-10-24 23:39:07 +020048#define RGMII_PAD_CTRL \
49 (PAD_CTL_PKE | PAD_CTL_PUE | \
50 PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
51
52#define SPI_PAD_CTRL \
53 (PAD_CTL_HYS | \
54 PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
55 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
56
57#define I2C_PAD_CTRL \
58 (PAD_CTL_PKE | PAD_CTL_PUE | \
59 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
60 PAD_CTL_DSE_240ohm | PAD_CTL_HYS | \
61 PAD_CTL_ODE)
62
63#define BUTTON_PAD_CTRL \
64 (PAD_CTL_PKE | PAD_CTL_PUE | \
65 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
66 PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
67
68#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
69
Marek Vasutf91c09a2014-10-24 23:39:07 +020070/*
71 * Audio
72 */
73static iomux_v3_cfg_t audio_pads[] = {
74 /* AUD_PWRON */
75 MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL),
76};
77
78static void novena_spl_setup_iomux_audio(void)
79{
80 imx_iomux_v3_setup_multiple_pads(audio_pads, ARRAY_SIZE(audio_pads));
81 gpio_direction_output(NOVENA_AUDIO_PWRON, 1);
82}
83
84/*
85 * ENET
86 */
87static iomux_v3_cfg_t enet_pads1[] = {
88 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
89 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
90 MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(RGMII_PAD_CTRL),
91 MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
92 MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
93 MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
94 MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
95 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL),
96 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
Nikolay Dimitrovb99ed272014-10-12 13:47:51 +030097
98 /* pin 35, PHY_AD2 */
99 MX6_PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
100 /* pin 32, MODE0 */
101 MX6_PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
102 /* pin 31, MODE1 */
103 MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
104 /* pin 28, MODE2 */
105 MX6_PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
106 /* pin 27, MODE3 */
107 MX6_PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
108 /* pin 33, CLK125_EN */
109 MX6_PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL),
110
Marek Vasutf91c09a2014-10-24 23:39:07 +0200111 /* pin 42 PHY nRST */
112 MX6_PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL),
113};
114
115static iomux_v3_cfg_t enet_pads2[] = {
116 MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(RGMII_PAD_CTRL),
117 MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
118 MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
119 MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
120 MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL),
121 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL),
122};
123
124static void novena_spl_setup_iomux_enet(void)
125{
126 imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
127
Nikolay Dimitrovb99ed272014-10-12 13:47:51 +0300128 /* Assert Ethernet PHY nRST */
Marek Vasutf91c09a2014-10-24 23:39:07 +0200129 gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
Marek Vasutf91c09a2014-10-24 23:39:07 +0200130
Nikolay Dimitrovb99ed272014-10-12 13:47:51 +0300131 /*
132 * Use imx6 internal pull-ups to drive PHY mode pins during PHY reset
133 * de-assertion. The intention is to use weak signal drivers (pull-ups)
134 * to prevent the conflict between PHY pins becoming outputs after
135 * reset and imx6 still driving the pins. The issue is described in PHY
136 * datasheet, p.14
137 */
138 gpio_direction_input(IMX_GPIO_NR(6, 30)); /* PHY_AD2 = 1 */
139 gpio_direction_input(IMX_GPIO_NR(6, 25)); /* MODE0 = 1 */
140 gpio_direction_input(IMX_GPIO_NR(6, 27)); /* MODE1 = 1 */
141 gpio_direction_input(IMX_GPIO_NR(6, 28)); /* MODE2 = 1 */
142 gpio_direction_input(IMX_GPIO_NR(6, 29)); /* MODE3 = 1 */
143 gpio_direction_input(IMX_GPIO_NR(6, 24)); /* CLK125_EN = 1 */
144
145 /* Following reset timing (p.53, fig.8 from the PHY datasheet) */
146 mdelay(10);
147
148 /* De-assert Ethernet PHY nRST */
149 gpio_set_value(IMX_GPIO_NR(3, 23), 1);
150
151 /* PHY is now configured, connect FEC to the pads */
Marek Vasutf91c09a2014-10-24 23:39:07 +0200152 imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
Nikolay Dimitrovb99ed272014-10-12 13:47:51 +0300153
154 /*
155 * PHY datasheet recommends on p.53 to wait at least 100us after reset
156 * before using MII, so we enforce the delay here
157 */
158 udelay(100);
Marek Vasutf91c09a2014-10-24 23:39:07 +0200159}
160
161/*
162 * FPGA
163 */
164static iomux_v3_cfg_t fpga_pads[] = {
165 /* FPGA_RESET_N */
166 MX6_PAD_DISP0_DAT13__GPIO5_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
167};
168
169static void novena_spl_setup_iomux_fpga(void)
170{
171 imx_iomux_v3_setup_multiple_pads(fpga_pads, ARRAY_SIZE(fpga_pads));
172 gpio_direction_output(NOVENA_FPGA_RESET_N_GPIO, 0);
173}
174
175/*
176 * GPIO Button
177 */
178static iomux_v3_cfg_t button_pads[] = {
179 /* Debug */
180 MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
181};
182
183static void novena_spl_setup_iomux_buttons(void)
184{
185 imx_iomux_v3_setup_multiple_pads(button_pads, ARRAY_SIZE(button_pads));
186}
187
188/*
189 * I2C
190 */
191/*
192 * I2C1:
193 * 0x1d ... MMA7455L
194 * 0x30 ... SO-DIMM temp sensor
195 * 0x44 ... STMPE610
196 * 0x50 ... SO-DIMM ID
197 */
198struct i2c_pads_info i2c_pad_info0 = {
199 .scl = {
200 .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
201 .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
202 .gp = IMX_GPIO_NR(3, 21)
203 },
204 .sda = {
205 .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
206 .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
207 .gp = IMX_GPIO_NR(3, 28)
208 }
209};
210
211/*
212 * I2C2:
213 * 0x08 ... PMIC
214 * 0x3a ... HDMI DCC
215 * 0x50 ... HDMI DCC
216 */
217static struct i2c_pads_info i2c_pad_info1 = {
218 .scl = {
219 .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
220 .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
221 .gp = IMX_GPIO_NR(2, 30)
222 },
223 .sda = {
224 .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
225 .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
226 .gp = IMX_GPIO_NR(3, 16)
227 }
228};
229
230/*
231 * I2C3:
232 * 0x11 ... ES8283
233 * 0x50 ... LCD EDID
234 * 0x56 ... EEPROM
235 */
236static struct i2c_pads_info i2c_pad_info2 = {
237 .scl = {
238 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
239 .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
240 .gp = IMX_GPIO_NR(3, 17)
241 },
242 .sda = {
243 .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
244 .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
245 .gp = IMX_GPIO_NR(3, 18)
246 }
247};
248
249static void novena_spl_setup_iomux_i2c(void)
250{
251 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
252 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
253 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
254}
255
256/*
257 * PCI express
258 */
259#ifdef CONFIG_CMD_PCI
260static iomux_v3_cfg_t pcie_pads[] = {
261 /* "Reset" pin */
262 MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
263 /* "Power on" pin */
264 MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL),
265 /* "Wake up" pin (input) */
266 MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
267 /* "Disable endpoint" (rfkill) pin */
268 MX6_PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL),
269};
270
271static void novena_spl_setup_iomux_pcie(void)
272{
273 imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads));
274
275 /* Ensure PCIe is powered down */
276 gpio_direction_output(NOVENA_PCIE_POWER_ON_GPIO, 0);
277
278 /* Put the card into reset */
279 gpio_direction_output(NOVENA_PCIE_RESET_GPIO, 0);
280
281 /* Input signal to wake system from mPCIe card */
282 gpio_direction_input(NOVENA_PCIE_WAKE_UP_GPIO);
283
284 /* Drive RFKILL high, to ensure the radio is turned on */
285 gpio_direction_output(NOVENA_PCIE_DISABLE_GPIO, 1);
286}
287#else
288static inline void novena_spl_setup_iomux_pcie(void) {}
289#endif
290
291/*
292 * SDHC
293 */
294static iomux_v3_cfg_t usdhc2_pads[] = {
295 MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
296 MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
297 MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
298 MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
299 MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
300 MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
301 MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
302 MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
303};
304
305static iomux_v3_cfg_t usdhc3_pads[] = {
306 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
307 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
308 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
309 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
310 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
311 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
312};
313
314static void novena_spl_setup_iomux_sdhc(void)
315{
316 imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
317 imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
318
319 /* Big SD write-protect and card-detect */
320 gpio_direction_input(IMX_GPIO_NR(1, 2));
321 gpio_direction_input(IMX_GPIO_NR(1, 4));
322}
323
324/*
325 * SPI
326 */
327#ifdef CONFIG_MXC_SPI
328static iomux_v3_cfg_t ecspi3_pads[] = {
329 /* SS1 */
330 MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
331 MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
332 MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
333 MX6_PAD_DISP0_DAT3__GPIO4_IO24 | MUX_PAD_CTRL(SPI_PAD_CTRL),
334 MX6_PAD_DISP0_DAT4__GPIO4_IO25 | MUX_PAD_CTRL(SPI_PAD_CTRL),
335 MX6_PAD_DISP0_DAT5__GPIO4_IO26 | MUX_PAD_CTRL(SPI_PAD_CTRL),
336 MX6_PAD_DISP0_DAT7__ECSPI3_RDY | MUX_PAD_CTRL(SPI_PAD_CTRL),
337};
338
339static void novena_spl_setup_iomux_spi(void)
340{
341 imx_iomux_v3_setup_multiple_pads(ecspi3_pads, ARRAY_SIZE(ecspi3_pads));
342 /* De-assert the nCS */
343 gpio_direction_output(MX6_PAD_DISP0_DAT3__GPIO4_IO24, 1);
344 gpio_direction_output(MX6_PAD_DISP0_DAT4__GPIO4_IO25, 1);
345 gpio_direction_output(MX6_PAD_DISP0_DAT5__GPIO4_IO26, 1);
346}
347#else
348static void novena_spl_setup_iomux_spi(void) {}
349#endif
350
351/*
352 * UART
353 */
354static iomux_v3_cfg_t const uart2_pads[] = {
355 MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
356 MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
357};
358
359static iomux_v3_cfg_t const uart3_pads[] = {
360 MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
361 MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
362};
363
364static iomux_v3_cfg_t const uart4_pads[] = {
365 MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
366 MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
367 MX6_PAD_CSI0_DAT16__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
368 MX6_PAD_CSI0_DAT17__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
369
370};
371
372static void novena_spl_setup_iomux_uart(void)
373{
374 imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
375 imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
376 imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
377}
378
379/*
380 * Video
381 */
382#ifdef CONFIG_VIDEO
383static iomux_v3_cfg_t hdmi_pads[] = {
384 /* "Ghost HPD" pin */
385 MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
Marek Vasut331ae842014-12-16 14:09:23 +0100386
387 /* LCD_PWR_CTL */
388 MX6_PAD_CSI0_DAT10__GPIO5_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
389 /* LCD_BL_ON */
390 MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
391 /* GPIO_PWM1 */
392 MX6_PAD_DISP0_DAT8__GPIO4_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
Marek Vasutf91c09a2014-10-24 23:39:07 +0200393};
394
395static void novena_spl_setup_iomux_video(void)
396{
397 imx_iomux_v3_setup_multiple_pads(hdmi_pads, ARRAY_SIZE(hdmi_pads));
398 gpio_direction_input(NOVENA_HDMI_GHOST_HPD);
399}
400#else
401static inline void novena_spl_setup_iomux_video(void) {}
402#endif
403
404/*
405 * SPL boots from uSDHC card
406 */
407#ifdef CONFIG_FSL_ESDHC
408static struct fsl_esdhc_cfg usdhc_cfg = {
409 USDHC3_BASE_ADDR, 0, 4
410};
411
412int board_mmc_getcd(struct mmc *mmc)
413{
414 /* There is no CD for a microSD card, assume always present. */
415 return 1;
416}
417
418int board_mmc_init(bd_t *bis)
419{
420 usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
421 return fsl_esdhc_initialize(bis, &usdhc_cfg);
422}
423#endif
424
425/* Configure MX6Q/DUAL mmdc DDR io registers */
426static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = {
427 /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
428 .dram_sdclk_0 = 0x00020038,
429 .dram_sdclk_1 = 0x00020038,
430 .dram_cas = 0x00000038,
431 .dram_ras = 0x00000038,
432 .dram_reset = 0x00000038,
433 /* SDCKE[0:1]: 100k pull-up */
Marek Vasut89d48592015-12-16 15:40:07 +0100434 .dram_sdcke0 = 0x00000038,
435 .dram_sdcke1 = 0x00000038,
Marek Vasutf91c09a2014-10-24 23:39:07 +0200436 /* SDBA2: pull-up disabled */
437 .dram_sdba2 = 0x00000000,
438 /* SDODT[0:1]: 100k pull-up, 40 ohm */
439 .dram_sdodt0 = 0x00000038,
440 .dram_sdodt1 = 0x00000038,
441 /* SDQS[0:7]: Differential input, 40 ohm */
442 .dram_sdqs0 = 0x00000038,
443 .dram_sdqs1 = 0x00000038,
444 .dram_sdqs2 = 0x00000038,
445 .dram_sdqs3 = 0x00000038,
446 .dram_sdqs4 = 0x00000038,
447 .dram_sdqs5 = 0x00000038,
448 .dram_sdqs6 = 0x00000038,
449 .dram_sdqs7 = 0x00000038,
450
451 /* DQM[0:7]: Differential input, 40 ohm */
452 .dram_dqm0 = 0x00000038,
453 .dram_dqm1 = 0x00000038,
454 .dram_dqm2 = 0x00000038,
455 .dram_dqm3 = 0x00000038,
456 .dram_dqm4 = 0x00000038,
457 .dram_dqm5 = 0x00000038,
458 .dram_dqm6 = 0x00000038,
459 .dram_dqm7 = 0x00000038,
460};
461
462/* Configure MX6Q/DUAL mmdc GRP io registers */
463static struct mx6dq_iomux_grp_regs novena_grp_ioregs = {
464 /* DDR3 */
465 .grp_ddr_type = 0x000c0000,
466 .grp_ddrmode_ctl = 0x00020000,
467 /* Disable DDR pullups */
468 .grp_ddrpke = 0x00000000,
469 /* ADDR[00:16], SDBA[0:1]: 40 ohm */
470 .grp_addds = 0x00000038,
471 /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
472 .grp_ctlds = 0x00000038,
473 /* DATA[00:63]: Differential input, 40 ohm */
474 .grp_ddrmode = 0x00020000,
475 .grp_b0ds = 0x00000038,
476 .grp_b1ds = 0x00000038,
477 .grp_b2ds = 0x00000038,
478 .grp_b3ds = 0x00000038,
479 .grp_b4ds = 0x00000038,
480 .grp_b5ds = 0x00000038,
481 .grp_b6ds = 0x00000038,
482 .grp_b7ds = 0x00000038,
483};
484
485static struct mx6_mmdc_calibration novena_mmdc_calib = {
486 /* write leveling calibration determine */
487 .p0_mpwldectrl0 = 0x00420048,
488 .p0_mpwldectrl1 = 0x006f0059,
489 .p1_mpwldectrl0 = 0x005a0104,
490 .p1_mpwldectrl1 = 0x01070113,
491 /* Read DQS Gating calibration */
492 .p0_mpdgctrl0 = 0x437c040b,
493 .p0_mpdgctrl1 = 0x0413040e,
494 .p1_mpdgctrl0 = 0x444f0446,
495 .p1_mpdgctrl1 = 0x044d0422,
496 /* Read Calibration: DQS delay relative to DQ read access */
497 .p0_mprddlctl = 0x4c424249,
498 .p1_mprddlctl = 0x4e48414f,
499 /* Write Calibration: DQ/DM delay relative to DQS write access */
500 .p0_mpwrdlctl = 0x42414641,
501 .p1_mpwrdlctl = 0x46374b43,
502};
503
504static struct mx6_ddr_sysinfo novena_ddr_info = {
505 /* Width of data bus: 0=16, 1=32, 2=64 */
506 .dsize = 2,
507 /* Config for full 4GB range so that get_mem_size() works */
508 .cs_density = 32, /* 32Gb per CS */
509 /* Single chip select */
510 .ncs = 1,
511 .cs1_mirror = 0,
Marek Vasut89d48592015-12-16 15:40:07 +0100512 .rtt_wr = 0, /* RTT_Wr = RZQ/4 */
513 .rtt_nom = 1, /* RTT_Nom = RZQ/2 */
514 .walat = 0, /* Write additional latency */
515 .ralat = 5, /* Read additional latency */
Marek Vasutf91c09a2014-10-24 23:39:07 +0200516 .mif3_mode = 3, /* Command prediction working mode */
517 .bi_on = 1, /* Bank interleaving enabled */
518 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
519 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
Fabio Estevamedf00932016-08-29 20:37:15 -0300520 .refsel = 1, /* Refresh cycles at 32KHz */
521 .refr = 7, /* 8 refresh commands per refresh cycle */
Marek Vasutf91c09a2014-10-24 23:39:07 +0200522};
523
524static struct mx6_ddr3_cfg elpida_4gib_1600 = {
525 .mem_speed = 1600,
526 .density = 4,
527 .width = 64,
528 .banks = 8,
529 .rowaddr = 16,
530 .coladdr = 10,
531 .pagesz = 2,
Marek Vasut89d48592015-12-16 15:40:07 +0100532 .trcd = 1375,
533 .trcmin = 4875,
534 .trasmin = 3500,
Marek Vasutf91c09a2014-10-24 23:39:07 +0200535};
536
Fabio Estevam7d29acd2014-11-14 09:37:01 -0200537static void ccgr_init(void)
538{
539 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
540
541 writel(0x00C03F3F, &ccm->CCGR0);
542 writel(0x0030FC03, &ccm->CCGR1);
543 writel(0x0FFFC000, &ccm->CCGR2);
544 writel(0x3FF00000, &ccm->CCGR3);
545 writel(0xFFFFF300, &ccm->CCGR4);
546 writel(0x0F0000C3, &ccm->CCGR5);
547 writel(0x000003FF, &ccm->CCGR6);
548}
549
Marek Vasutf91c09a2014-10-24 23:39:07 +0200550/*
551 * called from C runtime startup code (arch/arm/lib/crt0.S:_main)
552 * - we have a stack and a place to store GD, both in SRAM
553 * - no variable global data is available
554 */
555void board_init_f(ulong dummy)
556{
557 /* setup AIPS and disable watchdog */
558 arch_cpu_init();
559
Fabio Estevam7d29acd2014-11-14 09:37:01 -0200560 ccgr_init();
561 gpr_init();
562
Marek Vasutf91c09a2014-10-24 23:39:07 +0200563 /* setup GP timer */
564 timer_init();
565
566#ifdef CONFIG_BOARD_POSTCLK_INIT
567 board_postclk_init();
568#endif
569#ifdef CONFIG_FSL_ESDHC
570 get_clocks();
571#endif
572
573 /* Setup IOMUX and configure basics. */
574 novena_spl_setup_iomux_audio();
575 novena_spl_setup_iomux_buttons();
576 novena_spl_setup_iomux_enet();
577 novena_spl_setup_iomux_fpga();
578 novena_spl_setup_iomux_i2c();
579 novena_spl_setup_iomux_pcie();
580 novena_spl_setup_iomux_sdhc();
581 novena_spl_setup_iomux_spi();
582 novena_spl_setup_iomux_uart();
583 novena_spl_setup_iomux_video();
584
585 /* UART clocks enabled and gd valid - init serial console */
586 preloader_console_init();
587
588 /* Start the DDR DRAM */
589 mx6dq_dram_iocfg(64, &novena_ddr_ioregs, &novena_grp_ioregs);
590 mx6_dram_cfg(&novena_ddr_info, &novena_mmdc_calib, &elpida_4gib_1600);
591
Marek Vasut89d48592015-12-16 15:40:07 +0100592 /* Perform DDR DRAM calibration */
593 udelay(100);
Eric Nelson7f17fb72016-10-30 16:33:48 -0700594 mmdc_do_write_level_calibration(&novena_ddr_info);
595 mmdc_do_dqs_calibration(&novena_ddr_info);
Marek Vasutf91c09a2014-10-24 23:39:07 +0200596}