| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: BSD-3-Clause |
| 2 | /* |
| 3 | * IPQ5332 RDP474 board device tree source |
| 4 | * |
| 5 | * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include "ipq5332-rdp-common.dtsi" |
| 11 | |
| 12 | / { |
| 13 | model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9"; |
| 14 | compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332"; |
| 15 | }; |
| 16 | |
| 17 | &blsp1_i2c1 { |
| 18 | clock-frequency = <400000>; |
| 19 | pinctrl-0 = <&i2c_1_pins>; |
| 20 | pinctrl-names = "default"; |
| 21 | status = "okay"; |
| 22 | }; |
| 23 | |
| 24 | &sdhc { |
| 25 | bus-width = <4>; |
| 26 | max-frequency = <192000000>; |
| 27 | mmc-ddr-1_8v; |
| 28 | mmc-hs200-1_8v; |
| 29 | non-removable; |
| 30 | pinctrl-0 = <&sdc_default_state>; |
| 31 | pinctrl-names = "default"; |
| 32 | status = "okay"; |
| 33 | }; |
| 34 | |
| 35 | /* PINCTRL */ |
| 36 | |
| 37 | &tlmm { |
| 38 | i2c_1_pins: i2c-1-state { |
| 39 | pins = "gpio29", "gpio30"; |
| 40 | function = "blsp1_i2c0"; |
| 41 | drive-strength = <8>; |
| 42 | bias-pull-up; |
| 43 | }; |
| 44 | |
| 45 | sdc_default_state: sdc-default-state { |
| 46 | clk-pins { |
| 47 | pins = "gpio13"; |
| 48 | function = "sdc_clk"; |
| 49 | drive-strength = <8>; |
| 50 | bias-disable; |
| 51 | }; |
| 52 | |
| 53 | cmd-pins { |
| 54 | pins = "gpio12"; |
| 55 | function = "sdc_cmd"; |
| 56 | drive-strength = <8>; |
| 57 | bias-pull-up; |
| 58 | }; |
| 59 | |
| 60 | data-pins { |
| 61 | pins = "gpio8", "gpio9", "gpio10", "gpio11"; |
| 62 | function = "sdc_data"; |
| 63 | drive-strength = <8>; |
| 64 | bias-pull-up; |
| 65 | }; |
| 66 | }; |
| 67 | }; |