Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: BSD-3-Clause |
| 2 | /* |
| 3 | * Copyright (c) 2020, The Linux Foundation. All rights reserved. |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| 9 | #include "sm8250.dtsi" |
| 10 | #include "pm8150.dtsi" |
| 11 | #include "pm8150b.dtsi" |
| 12 | #include "pm8150l.dtsi" |
| 13 | |
| 14 | / { |
| 15 | model = "Qualcomm Technologies, Inc. SM8250 HDK"; |
| 16 | compatible = "qcom,sm8250-hdk", "qcom,sm8250"; |
| 17 | chassis-type = "embedded"; |
| 18 | |
| 19 | aliases { |
| 20 | serial0 = &uart12; |
| 21 | }; |
| 22 | |
| 23 | chosen { |
| 24 | stdout-path = "serial0:115200n8"; |
| 25 | }; |
| 26 | |
| 27 | vph_pwr: vph-pwr-regulator { |
| 28 | compatible = "regulator-fixed"; |
| 29 | regulator-name = "vph_pwr"; |
| 30 | regulator-min-microvolt = <3700000>; |
| 31 | regulator-max-microvolt = <3700000>; |
| 32 | }; |
| 33 | |
| 34 | vreg_s4a_1p8: pm8150-s4 { |
| 35 | compatible = "regulator-fixed"; |
| 36 | regulator-name = "vreg_s4a_1p8"; |
| 37 | |
| 38 | regulator-min-microvolt = <1800000>; |
| 39 | regulator-max-microvolt = <1800000>; |
| 40 | |
| 41 | regulator-always-on; |
| 42 | regulator-boot-on; |
| 43 | |
| 44 | vin-supply = <&vph_pwr>; |
| 45 | }; |
| 46 | |
| 47 | vreg_s6c_0p88: smpc6-regulator { |
| 48 | compatible = "regulator-fixed"; |
| 49 | regulator-name = "vreg_s6c_0p88"; |
| 50 | |
| 51 | regulator-min-microvolt = <880000>; |
| 52 | regulator-max-microvolt = <880000>; |
| 53 | regulator-always-on; |
| 54 | vin-supply = <&vph_pwr>; |
| 55 | }; |
| 56 | |
| 57 | gpio-keys { |
| 58 | compatible = "gpio-keys"; |
| 59 | |
| 60 | key-vol-up { |
| 61 | label = "Volume Up"; |
| 62 | linux,code = <KEY_VOLUMEUP>; |
| 63 | gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; |
| 64 | }; |
| 65 | }; |
| 66 | }; |
| 67 | |
| 68 | &apps_rsc { |
| 69 | regulators-0 { |
| 70 | compatible = "qcom,pm8150-rpmh-regulators"; |
| 71 | qcom,pmic-id = "a"; |
| 72 | |
| 73 | vdd-s1-supply = <&vph_pwr>; |
| 74 | vdd-s2-supply = <&vph_pwr>; |
| 75 | vdd-s3-supply = <&vph_pwr>; |
| 76 | vdd-s4-supply = <&vph_pwr>; |
| 77 | vdd-s5-supply = <&vph_pwr>; |
| 78 | vdd-s6-supply = <&vph_pwr>; |
| 79 | vdd-s7-supply = <&vph_pwr>; |
| 80 | vdd-s8-supply = <&vph_pwr>; |
| 81 | vdd-s9-supply = <&vph_pwr>; |
| 82 | vdd-s10-supply = <&vph_pwr>; |
| 83 | vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; |
| 84 | vdd-l2-l10-supply = <&vreg_bob>; |
| 85 | vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; |
| 86 | vdd-l6-l9-supply = <&vreg_s8c_1p3>; |
| 87 | vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; |
| 88 | vdd-l13-l16-l17-supply = <&vreg_bob>; |
| 89 | |
| 90 | vreg_s5a_1p9: smps5 { |
| 91 | regulator-name = "vreg_s5a_1p9"; |
| 92 | regulator-min-microvolt = <1824000>; |
| 93 | regulator-max-microvolt = <2000000>; |
| 94 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 95 | }; |
| 96 | |
| 97 | vreg_s6a_0p95: smps6 { |
| 98 | regulator-name = "vreg_s6a_0p95"; |
| 99 | regulator-min-microvolt = <600000>; |
| 100 | regulator-max-microvolt = <1128000>; |
| 101 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 102 | }; |
| 103 | |
| 104 | vreg_l2a_3p1: ldo2 { |
| 105 | regulator-name = "vreg_l2a_3p1"; |
| 106 | regulator-min-microvolt = <3072000>; |
| 107 | regulator-max-microvolt = <3072000>; |
| 108 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 109 | }; |
| 110 | |
| 111 | vreg_l3a_0p9: ldo3 { |
| 112 | regulator-name = "vreg_l3a_0p9"; |
| 113 | regulator-min-microvolt = <928000>; |
| 114 | regulator-max-microvolt = <932000>; |
| 115 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 116 | }; |
| 117 | |
| 118 | vreg_l5a_0p88: ldo5 { |
| 119 | regulator-name = "vreg_l5a_0p88"; |
| 120 | regulator-min-microvolt = <880000>; |
| 121 | regulator-max-microvolt = <880000>; |
| 122 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 123 | }; |
| 124 | |
| 125 | vreg_l6a_1p2: ldo6 { |
| 126 | regulator-name = "vreg_l6a_1p2"; |
| 127 | regulator-min-microvolt = <1200000>; |
| 128 | regulator-max-microvolt = <1200000>; |
| 129 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 130 | }; |
| 131 | |
| 132 | vreg_l7a_1p7: ldo7 { |
| 133 | regulator-name = "vreg_l7a_1p7"; |
| 134 | regulator-min-microvolt = <1704000>; |
| 135 | regulator-max-microvolt = <1800000>; |
| 136 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 137 | }; |
| 138 | |
| 139 | vreg_l9a_1p2: ldo9 { |
| 140 | regulator-name = "vreg_l9a_1p2"; |
| 141 | regulator-min-microvolt = <1200000>; |
| 142 | regulator-max-microvolt = <1200000>; |
| 143 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 144 | }; |
| 145 | |
| 146 | vreg_l10a_1p8: ldo10 { |
| 147 | regulator-name = "vreg_l10a_1p8"; |
| 148 | regulator-min-microvolt = <1800000>; |
| 149 | regulator-max-microvolt = <2960000>; |
| 150 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 151 | }; |
| 152 | |
| 153 | vreg_l12a_1p8: ldo12 { |
| 154 | regulator-name = "vreg_l12a_1p8"; |
| 155 | regulator-min-microvolt = <1800000>; |
| 156 | regulator-max-microvolt = <1800000>; |
| 157 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 158 | }; |
| 159 | |
| 160 | vreg_l13a_ts_3p0: ldo13 { |
| 161 | regulator-name = "vreg_l13a_ts_3p0"; |
| 162 | regulator-min-microvolt = <3008000>; |
| 163 | regulator-max-microvolt = <3008000>; |
| 164 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 165 | }; |
| 166 | |
| 167 | vreg_l14a_1p8: ldo14 { |
| 168 | regulator-name = "vreg_l14a_1p8"; |
| 169 | regulator-min-microvolt = <1800000>; |
| 170 | regulator-max-microvolt = <1880000>; |
| 171 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 172 | }; |
| 173 | |
| 174 | vreg_l15a_1p8: ldo15 { |
| 175 | regulator-name = "vreg_l15a_1p8"; |
| 176 | regulator-min-microvolt = <1800000>; |
| 177 | regulator-max-microvolt = <1800000>; |
| 178 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 179 | }; |
| 180 | |
| 181 | vreg_l16a_3p3: ldo16 { |
| 182 | regulator-name = "vreg_l16a_3p3"; |
| 183 | regulator-min-microvolt = <3024000>; |
| 184 | regulator-max-microvolt = <3304000>; |
| 185 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 186 | }; |
| 187 | |
| 188 | vreg_l17a_2p96: ldo17 { |
| 189 | regulator-name = "vreg_l17a_2p96"; |
| 190 | regulator-min-microvolt = <2496000>; |
| 191 | regulator-max-microvolt = <3008000>; |
| 192 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 193 | }; |
| 194 | |
| 195 | vreg_l18a_0p92: ldo18 { |
| 196 | regulator-name = "vreg_l18a_0p92"; |
| 197 | regulator-min-microvolt = <800000>; |
| 198 | regulator-max-microvolt = <920000>; |
| 199 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 200 | }; |
| 201 | }; |
| 202 | |
| 203 | regulators-1 { |
| 204 | compatible = "qcom,pm8150l-rpmh-regulators"; |
| 205 | qcom,pmic-id = "c"; |
| 206 | |
| 207 | vdd-s1-supply = <&vph_pwr>; |
| 208 | vdd-s2-supply = <&vph_pwr>; |
| 209 | vdd-s3-supply = <&vph_pwr>; |
| 210 | vdd-s4-supply = <&vph_pwr>; |
| 211 | vdd-s5-supply = <&vph_pwr>; |
| 212 | vdd-s6-supply = <&vph_pwr>; |
| 213 | vdd-s7-supply = <&vph_pwr>; |
| 214 | vdd-s8-supply = <&vph_pwr>; |
| 215 | vdd-l1-l8-supply = <&vreg_s4a_1p8>; |
| 216 | vdd-l2-l3-supply = <&vreg_s8c_1p3>; |
| 217 | vdd-l4-l5-l6-supply = <&vreg_bob>; |
| 218 | vdd-l7-l11-supply = <&vreg_bob>; |
| 219 | vdd-l9-l10-supply = <&vreg_bob>; |
| 220 | vdd-bob-supply = <&vph_pwr>; |
| 221 | |
| 222 | vreg_bob: bob { |
| 223 | regulator-name = "vreg_bob"; |
| 224 | regulator-min-microvolt = <3008000>; |
| 225 | regulator-max-microvolt = <3960000>; |
| 226 | regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| 227 | }; |
| 228 | |
| 229 | vreg_s8c_1p3: smps8 { |
| 230 | regulator-name = "vreg_s8c_1p3"; |
| 231 | regulator-min-microvolt = <1200000>; |
| 232 | regulator-max-microvolt = <1400000>; |
| 233 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 234 | }; |
| 235 | |
| 236 | vreg_l1c_1p8: ldo1 { |
| 237 | regulator-name = "vreg_l1c_1p8"; |
| 238 | regulator-min-microvolt = <1800000>; |
| 239 | regulator-max-microvolt = <1800000>; |
| 240 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 241 | }; |
| 242 | |
| 243 | vreg_l2c_1p2: ldo2 { |
| 244 | regulator-name = "vreg_l2c_1p2"; |
| 245 | regulator-min-microvolt = <1200000>; |
| 246 | regulator-max-microvolt = <1304000>; |
| 247 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 248 | }; |
| 249 | |
| 250 | vreg_l3c_0p8: ldo3 { |
| 251 | regulator-name = "vreg_l3c_0p8"; |
| 252 | regulator-min-microvolt = <800000>; |
| 253 | regulator-max-microvolt = <1200000>; |
| 254 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 255 | }; |
| 256 | |
| 257 | vreg_l4c_1p8: ldo4 { |
| 258 | regulator-name = "vreg_l4c_1p8"; |
| 259 | regulator-min-microvolt = <1800000>; |
| 260 | regulator-max-microvolt = <2800000>; |
| 261 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 262 | }; |
| 263 | |
| 264 | vreg_l5c_1p8: ldo5 { |
| 265 | regulator-name = "vreg_l5c_1p8"; |
| 266 | regulator-min-microvolt = <1800000>; |
| 267 | regulator-max-microvolt = <2800000>; |
| 268 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 269 | }; |
| 270 | |
| 271 | vreg_l6c_2p96: ldo6 { |
| 272 | regulator-name = "vreg_l6c_2p96"; |
| 273 | regulator-min-microvolt = <1800000>; |
| 274 | regulator-max-microvolt = <2960000>; |
| 275 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 276 | }; |
| 277 | |
| 278 | vreg_l7c_cam_vcm0_2p85: ldo7 { |
| 279 | regulator-name = "vreg_l7c_cam_vcm0_2p85"; |
| 280 | regulator-min-microvolt = <2856000>; |
| 281 | regulator-max-microvolt = <3104000>; |
| 282 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 283 | }; |
| 284 | |
| 285 | vreg_l8c_1p8: ldo8 { |
| 286 | regulator-name = "vreg_l8c_1p8"; |
| 287 | regulator-min-microvolt = <1800000>; |
| 288 | regulator-max-microvolt = <1800000>; |
| 289 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 290 | }; |
| 291 | |
| 292 | vreg_l9c_2p96: ldo9 { |
| 293 | regulator-name = "vreg_l9c_2p96"; |
| 294 | regulator-min-microvolt = <2704000>; |
| 295 | regulator-max-microvolt = <2960000>; |
| 296 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 297 | }; |
| 298 | |
| 299 | vreg_l10c_3p0: ldo10 { |
| 300 | regulator-name = "vreg_l10c_3p0"; |
| 301 | regulator-min-microvolt = <3000000>; |
| 302 | regulator-max-microvolt = <3312000>; |
| 303 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 304 | }; |
| 305 | |
| 306 | vreg_l11c_3p3: ldo11 { |
| 307 | regulator-name = "vreg_l11c_3p3"; |
| 308 | regulator-min-microvolt = <3104000>; |
| 309 | regulator-max-microvolt = <3312000>; |
| 310 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 311 | }; |
| 312 | }; |
| 313 | |
| 314 | regulators-2 { |
| 315 | compatible = "qcom,pm8009-rpmh-regulators"; |
| 316 | qcom,pmic-id = "f"; |
| 317 | |
| 318 | vdd-s1-supply = <&vph_pwr>; |
| 319 | vdd-s2-supply = <&vreg_bob>; |
| 320 | vdd-l2-supply = <&vreg_s8c_1p3>; |
| 321 | vdd-l5-l6-supply = <&vreg_bob>; |
| 322 | vdd-l7-supply = <&vreg_s4a_1p8>; |
| 323 | |
| 324 | vreg_l1f_cam_dvdd1_1p1: ldo1 { |
| 325 | regulator-name = "vreg_l1f_cam_dvdd1_1p1"; |
| 326 | regulator-min-microvolt = <1104000>; |
| 327 | regulator-max-microvolt = <1104000>; |
| 328 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 329 | }; |
| 330 | |
| 331 | vreg_l2f_cam_dvdd0_1p2: ldo2 { |
| 332 | regulator-name = "vreg_l2f_cam_dvdd0_1p2"; |
| 333 | regulator-min-microvolt = <1200000>; |
| 334 | regulator-max-microvolt = <1200000>; |
| 335 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 336 | }; |
| 337 | |
| 338 | vreg_l3f_cam_dvdd2_1p05: ldo3 { |
| 339 | regulator-name = "vreg_l3f_cam_dvdd2_1p05"; |
| 340 | regulator-min-microvolt = <1056000>; |
| 341 | regulator-max-microvolt = <1056000>; |
| 342 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 343 | }; |
| 344 | |
| 345 | vreg_l5f_cam_avdd0_2p85: ldo5 { |
| 346 | regulator-name = "vreg_l5f_cam_avdd0_2p85"; |
| 347 | regulator-min-microvolt = <2800000>; |
| 348 | regulator-max-microvolt = <3000000>; |
| 349 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 350 | }; |
| 351 | |
| 352 | vreg_l6f_cam_avdd1_2p8: ldo6 { |
| 353 | regulator-name = "vreg_l6f_cam_avdd1_2p8"; |
| 354 | regulator-min-microvolt = <2800000>; |
| 355 | regulator-max-microvolt = <3000000>; |
| 356 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 357 | }; |
| 358 | |
| 359 | vreg_l7f_1p8: ldo7 { |
| 360 | regulator-name = "vreg_l7f_1p8"; |
| 361 | regulator-min-microvolt = <1800000>; |
| 362 | regulator-max-microvolt = <1800000>; |
| 363 | regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| 364 | }; |
| 365 | }; |
| 366 | }; |
| 367 | |
| 368 | &gmu { |
| 369 | status = "okay"; |
| 370 | }; |
| 371 | |
| 372 | &gpu { |
| 373 | status = "okay"; |
| 374 | }; |
| 375 | |
| 376 | &pon_pwrkey { |
| 377 | status = "okay"; |
| 378 | }; |
| 379 | |
| 380 | &pon_resin { |
| 381 | status = "okay"; |
| 382 | |
| 383 | linux,code = <KEY_VOLUMEDOWN>; |
| 384 | }; |
| 385 | |
| 386 | &qupv3_id_1 { |
| 387 | status = "okay"; |
| 388 | }; |
| 389 | |
| 390 | &tlmm { |
| 391 | gpio-reserved-ranges = <28 4>, <40 4>; |
| 392 | }; |
| 393 | |
| 394 | &uart12 { |
| 395 | status = "okay"; |
| 396 | }; |
| 397 | |
| 398 | &ufs_mem_hc { |
| 399 | status = "okay"; |
| 400 | |
| 401 | vcc-supply = <&vreg_l17a_2p96>; |
| 402 | vcc-max-microamp = <800000>; |
| 403 | vccq-supply = <&vreg_l6a_1p2>; |
| 404 | vccq-max-microamp = <800000>; |
| 405 | vccq2-supply = <&vreg_s4a_1p8>; |
| 406 | vccq2-max-microamp = <800000>; |
| 407 | }; |
| 408 | |
| 409 | &ufs_mem_phy { |
| 410 | status = "okay"; |
| 411 | |
| 412 | vdda-phy-supply = <&vreg_l5a_0p88>; |
| 413 | vdda-pll-supply = <&vreg_l9a_1p2>; |
| 414 | }; |
| 415 | |
| 416 | &usb_1_hsphy { |
| 417 | status = "okay"; |
| 418 | vdda-pll-supply = <&vreg_l5a_0p88>; |
| 419 | vdda33-supply = <&vreg_l2a_3p1>; |
| 420 | vdda18-supply = <&vreg_l12a_1p8>; |
| 421 | }; |
| 422 | |
| 423 | &usb_2_hsphy { |
| 424 | status = "okay"; |
| 425 | vdda-pll-supply = <&vreg_l5a_0p88>; |
| 426 | vdda33-supply = <&vreg_l2a_3p1>; |
| 427 | vdda18-supply = <&vreg_l12a_1p8>; |
| 428 | }; |
| 429 | |
| 430 | &usb_1_qmpphy { |
| 431 | status = "okay"; |
| 432 | vdda-phy-supply = <&vreg_l9a_1p2>; |
| 433 | vdda-pll-supply = <&vreg_l18a_0p92>; |
| 434 | }; |
| 435 | |
| 436 | &usb_2_qmpphy { |
| 437 | status = "okay"; |
| 438 | vdda-phy-supply = <&vreg_l9a_1p2>; |
| 439 | vdda-pll-supply = <&vreg_l18a_0p92>; |
| 440 | }; |
| 441 | |
| 442 | &usb_1 { |
| 443 | status = "okay"; |
| 444 | }; |
| 445 | |
| 446 | &usb_2 { |
| 447 | status = "okay"; |
| 448 | }; |
| 449 | |
| 450 | &usb_1_dwc3 { |
| 451 | dr_mode = "peripheral"; |
| 452 | }; |
| 453 | |
| 454 | &usb_2_dwc3 { |
| 455 | dr_mode = "host"; |
| 456 | }; |
| 457 | |
| 458 | &venus { |
| 459 | status = "okay"; |
| 460 | }; |