blob: 01ee72b8bc3f1d4cadd40fbecb5e828355acd990 [file] [log] [blame]
wdenkaaf224a2004-03-14 15:20:55 +00001/*
2 * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
3 * Stephan Linz <linz@li-pro.net>
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#ifndef __CONFIG_H
25#define __CONFIG_H
26
27/***********************************************************************
28 * Include the whole NIOS CPU configuration.
29 *
30 * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
31 *
32 ***********************************************************************/
33
34#if defined(CONFIG_NIOS_BASE_32)
35#include <configs/ADNPESC1_base_32.h>
36#else
37#error *** CFG_ERROR: you have to setup right NIOS CPU configuration
38#endif
39
40/*------------------------------------------------------------------------
41 * BOARD/CPU -- TOP-LEVEL
42 *----------------------------------------------------------------------*/
43#define CONFIG_NIOS 1 /* NIOS-32 core */
44#define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */
45#define CONFIG_SYS_CLK_FREQ CFG_NIOS_CPU_CLK/* 50 MHz core clock */
46#define CFG_HZ 1000 /* 1 msec time tick */
47#undef CFG_CLKS_IN_HZ
48#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
49
50/*------------------------------------------------------------------------
51 * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
52 *----------------------------------------------------------------------*/
53#if (CFG_NIOS_CPU_SDRAM_SIZE != 0)
54
55#define CFG_SDRAM_BASE CFG_NIOS_CPU_SDRAM_BASE
56#define CFG_SDRAM_SIZE CFG_NIOS_CPU_SDRAM_SIZE
57
58#else
59#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config
60#endif
61
62#if defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE)
63
64#define CFG_SRAM_BASE CFG_NIOS_CPU_SRAM_BASE
65#define CFG_SRAM_SIZE CFG_NIOS_CPU_SRAM_SIZE
66
67#else
68
69#undef CFG_SRAM_BASE
70#undef CFG_SRAM_SIZE
71
72#endif
73
74#define CFG_VECT_BASE CFG_NIOS_CPU_VEC_BASE
75
76/*------------------------------------------------------------------------
77 * MEMORY ORGANIZATION - For the most part, you can put things pretty
78 * much anywhere. This is pretty flexible for Nios. So here we make some
79 * arbitrary choices & assume that the monitor is placed at the end of
80 * a memory resource (so you must make sure TEXT_BASE is chosen
81 * appropriately -- this is very important if you plan to move your
82 * memory to another place as configured at this time !!!).
83 *
Wolfgang Denk53677ef2008-05-20 16:00:29 +020084 * -The heap is placed below the monitor.
85 * -Global data is placed below the heap.
86 * -The stack is placed below global data (&grows down).
wdenkaaf224a2004-03-14 15:20:55 +000087 *----------------------------------------------------------------------*/
88#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */
89#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
90#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
91
92#define CFG_MONITOR_BASE TEXT_BASE
93#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
94#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
95#define CFG_INIT_SP CFG_GBL_DATA_OFFSET
96
97/*------------------------------------------------------------------------
98 * FLASH (AM29LV065D)
99 *----------------------------------------------------------------------*/
100#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
101
102#define CFG_FLASH_BASE CFG_NIOS_CPU_FLASH_BASE
103#define CFG_FLASH_SIZE CFG_NIOS_CPU_FLASH_SIZE
104#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */
105#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */
106#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
107#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
108#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size */
109
110#else
111#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config
112#endif
113
114/*------------------------------------------------------------------------
115 * ENVIRONMENT
116 *----------------------------------------------------------------------*/
117#if (CFG_NIOS_CPU_FLASH_SIZE != 0)
118
119#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */
120
121/* Mem addr of environment */
122#if defined(CONFIG_NIOS_BASE_32)
123#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN)
124#else
125#error *** CFG_ERROR: you have to setup the environment base address CFG_ENV_ADDR
126#endif
127
128#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
129#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
130
131#else
132#define CFG_ENV_IS_NOWHERE 1 /* NO Environment */
133#endif
134
135/*------------------------------------------------------------------------
136 * NIOS APPLICATION CODE BASE AREA
137 *----------------------------------------------------------------------*/
138#if ((CFG_ENV_ADDR + CFG_ENV_SIZE) == 0x1050000)
139#define CFG_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100"
140#define CFG_ADNPESC1_NIOS_APPL_ENTRY "0x1050000"
141#define CFG_ADNPESC1_NIOS_APPL_IDENT "0x105000c"
142#define CFG_ADNPESC1_NIOS_APPL_END "0x11fffff"
143#define CFG_ADNPESC1_FILESYSTEM_BASE "0x1200000"
144#define CFG_ADNPESC1_FILESYSTEM_END "0x17fffff"
145#else
146#error *** CFG_ERROR: missing right appl.code base configuration, expand your config.h
147#endif
148#define CFG_ADNPESC1_NIOS_IDENTIFIER "Nios"
149
150/*------------------------------------------------------------------------
151 * BOOT ENVIRONMENT
152 *----------------------------------------------------------------------*/
153#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
154#define CFG_ADNPESC1_SLED_BOOT_OFF "sled boot off; "
155#define CFG_ADNPESC1_SLED_RED_BLINK "sled red blink; "
156#else
157#define CFG_ADNPESC1_SLED_BOOT_OFF
158#define CFG_ADNPESC1_SLED_RED_BLINK
159#endif
160
161#define CONFIG_BOOTDELAY 5
162#define CONFIG_BOOTCOMMAND \
163 "if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \
164 "then " \
165 "wd off; " \
166 CFG_ADNPESC1_SLED_BOOT_OFF \
167 "go $appl_entry_addr; " \
168 "else " \
169 CFG_ADNPESC1_SLED_RED_BLINK \
170 "echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\
171 "echo *** invalid application at $appl_entry_addr; " \
172 "echo *** stop bootup...; " \
173 "fi"
174
175/*------------------------------------------------------------------------
176 * EXTRA ENVIRONMENT
177 *----------------------------------------------------------------------*/
178#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
179#define CFG_ADNPESC1_SLED_YELLO_ON "sled yellow on; "
180#define CFG_ADNPESC1_SLED_YELLO_OFF "sled yellow off; "
181#else
182#define CFG_ADNPESC1_SLED_YELLO_ON
183#define CFG_ADNPESC1_SLED_YELLO_OFF
184#endif
185
186#define CONFIG_EXTRA_ENV_SETTINGS \
187 "update_allowed=0\0" \
188 "update_load_addr=" CFG_ADNPESC1_UPDATE_LOAD_ADDR "\0" \
189 "appl_entry_addr=" CFG_ADNPESC1_NIOS_APPL_ENTRY "\0" \
190 "appl_end_addr=" CFG_ADNPESC1_NIOS_APPL_END "\0" \
191 "appl_ident_addr=" CFG_ADNPESC1_NIOS_APPL_IDENT "\0" \
192 "appl_ident_str=" CFG_ADNPESC1_NIOS_IDENTIFIER "\0" \
193 "appl_name=ADNPESC1/base32/linux.bin\0" \
194 "appl_update=" \
195 "if itest.b $update_allowed != 0; " \
196 "then " \
197 CFG_ADNPESC1_SLED_YELLO_ON \
198 "tftp $update_load_addr $appl_name; " \
199 "protect off $appl_entry_addr $appl_end_addr; " \
200 "era $appl_entry_addr $appl_end_addr; " \
201 "cp.b $update_load_addr $appl_entry_addr $filesize; "\
202 CFG_ADNPESC1_SLED_YELLO_OFF \
203 "else " \
204 "echo *** update not allowed (update_allowed=$update_allowed); "\
205 "fi\0" \
206 "fs_base_addr=" CFG_ADNPESC1_FILESYSTEM_BASE "\0" \
207 "fs_end_addr=" CFG_ADNPESC1_FILESYSTEM_END "\0" \
208 "fs_name=ADNPESC1/base32/romfs.img\0" \
209 "fs_update=" \
210 "if itest.b $update_allowed != 0; " \
211 "then " \
212 CFG_ADNPESC1_SLED_YELLO_ON \
213 "tftp $update_load_addr $fs_name; " \
214 "protect off $fs_base_addr $fs_end_addr; " \
215 "era $fs_base_addr $fs_end_addr; " \
216 "cp.b $update_load_addr $fs_base_addr $filesize; "\
217 CFG_ADNPESC1_SLED_YELLO_OFF \
218 "else " \
219 "echo *** update not allowed (update_allowed=$update_allowed); "\
220 "fi\0" \
221 "uboot_name=ADNPESC1/base32/u-boot.bin\0" \
222 "uboot_loadnrun=" \
223 "if ping $serverip; " \
224 "then " \
225 CFG_ADNPESC1_SLED_YELLO_ON \
226 "tftp $update_load_addr $uboot_name; " \
227 "wd off; " \
228 "go $update_load_addr; " \
229 "else " \
230 "echo *** missing connection to $serverip; " \
231 "echo *** check your network and try again...; "\
232 "fi\0"
233
234/*------------------------------------------------------------------------
235 * CONSOLE
236 *----------------------------------------------------------------------*/
237#if (CFG_NIOS_CPU_UART_NUMS != 0)
238
239#define CFG_NIOS_CONSOLE CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */
240
241#if (CFG_NIOS_CPU_UART0_BR != 0)
242#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
243#define CONFIG_BAUDRATE CFG_NIOS_CPU_UART0_BR
244#else
245#undef CFG_NIOS_FIXEDBAUD
246#define CONFIG_BAUDRATE 115200
247#endif
248
249#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
250
251#else
252#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config
253#endif
254
255/*------------------------------------------------------------------------
256 * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
257 * so an avalon bus timer is required.
258 *----------------------------------------------------------------------*/
259#if (CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER)
260
261#if (CFG_NIOS_CPU_TICK_TIMER == 0)
262
263#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */
264#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ
265
266#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
267
268#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ)
269#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ)
270#else
271#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
272#endif
273
274#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
275
276#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */
277
278#if (CFG_HZ <= 1000)
279#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
280#else
281#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
282#endif
283
284#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
285
286#else
287#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct
288#endif
289
290#elif (CFG_NIOS_CPU_TICK_TIMER == 1)
291
292#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */
293#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ
294
295#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
296
297#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ)
298#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ)
299#else
300#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ
301#endif
302
303#undef CFG_NIOS_TMRCNT /* no preloadable counter value */
304
305#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */
306
307#if (CFG_HZ <= 1000)
308#define CFG_NIOS_TMRMS (1000 / CFG_HZ)
309#else
310#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000
311#endif
312
313#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ)
314
315#else
316#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct
317#endif
318
319#endif /* CFG_NIOS_CPU_TICK_TIMER */
320
321#else
322#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config
323#endif
324
325/*------------------------------------------------------------------------
326 * WATCHDOG (or better MAX823 supervisory circuite access)
327 *----------------------------------------------------------------------*/
328#define CONFIG_HW_WATCHDOG 1 /* board specific WD */
329
330#ifdef CONFIG_HW_WATCHDOG
331
332/* MAX823 supervisor -- watchdog enable port at: */
333#if (CFG_NIOS_CPU_WDENA_PIO == 0)
334#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO0 /* PIO0 */
335#elif (CFG_NIOS_CPU_WDENA_PIO == 1)
336#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO1 /* PIO1 */
337#elif (CFG_NIOS_CPU_WDENA_PIO == 2)
338#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO2 /* PIO2 */
339#elif (CFG_NIOS_CPU_WDENA_PIO == 3)
340#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO3 /* PIO3 */
341#elif (CFG_NIOS_CPU_WDENA_PIO == 4)
342#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO4 /* PIO4 */
343#elif (CFG_NIOS_CPU_WDENA_PIO == 5)
344#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO5 /* PIO5 */
345#elif (CFG_NIOS_CPU_WDENA_PIO == 6)
346#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO6 /* PIO6 */
347#elif (CFG_NIOS_CPU_WDENA_PIO == 7)
348#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO7 /* PIO7 */
349#elif (CFG_NIOS_CPU_WDENA_PIO == 8)
350#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO8 /* PIO8 */
351#elif (CFG_NIOS_CPU_WDENA_PIO == 9)
352#define CONFIG_HW_WDENA_BASE CFG_NIOS_CPU_PIO9 /* PIO9 */
353#else
354#error *** CFG_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
355#endif
356
357/* MAX823 supervisor -- watchdog trigger port at: */
358#if (CFG_NIOS_CPU_WDTOG_PIO == 0)
359#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO0 /* PIO0 */
360#elif (CFG_NIOS_CPU_WDTOG_PIO == 1)
361#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO1 /* PIO1 */
362#elif (CFG_NIOS_CPU_WDTOG_PIO == 2)
363#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO2 /* PIO2 */
364#elif (CFG_NIOS_CPU_WDTOG_PIO == 3)
365#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO3 /* PIO3 */
366#elif (CFG_NIOS_CPU_WDTOG_PIO == 4)
367#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO4 /* PIO4 */
368#elif (CFG_NIOS_CPU_WDTOG_PIO == 5)
369#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO5 /* PIO5 */
370#elif (CFG_NIOS_CPU_WDTOG_PIO == 6)
371#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO6 /* PIO6 */
372#elif (CFG_NIOS_CPU_WDTOG_PIO == 7)
373#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO7 /* PIO7 */
374#elif (CFG_NIOS_CPU_WDTOG_PIO == 8)
375#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO8 /* PIO8 */
376#elif (CFG_NIOS_CPU_WDTOG_PIO == 9)
377#define CONFIG_HW_WDTOG_BASE CFG_NIOS_CPU_PIO9 /* PIO9 */
378#else
379#error *** CFG_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
380#endif
381
382#if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */
383#define CONFIG_HW_WDENA_BIT 0 /* WD enable @ Bit 0 */
384#define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */
385#define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/
386#else
387#error *** CFG_ERROR: missing watchdog bit configuration, expand your config.h
388#endif
389
390#endif /* CONFIG_HW_WATCHDOG */
391
392/*------------------------------------------------------------------------
393 * SERIAL PERIPHAREL INTERFACE
394 *----------------------------------------------------------------------*/
395#if (CFG_NIOS_CPU_SPI_NUMS == 1)
396
397#define CONFIG_NIOS_SPI 1 /* SPI support active */
398#define CFG_NIOS_SPIBASE CFG_NIOS_CPU_SPI0
399#define CFG_NIOS_SPIBITS CFG_NIOS_CPU_SPI0_BITS
400
401#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */
402#define CFG_SPI_RTC_DEVID 0 /* as 1st SPI device */
403
wdenkaaf224a2004-03-14 15:20:55 +0000404#else
405#undef CONFIG_NIOS_SPI /* NO SPI support */
wdenkaaf224a2004-03-14 15:20:55 +0000406#endif
407
408/*------------------------------------------------------------------------
409 * Ethernet -- needs work!
410 *----------------------------------------------------------------------*/
411#if (CFG_NIOS_CPU_LAN_NUMS == 1)
412
413#if (CFG_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
414
415#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
416#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
417#define CONFIG_SMC91111_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
418
419#if (CFG_NIOS_CPU_LAN0_BUSW == 32)
420#define CONFIG_SMC_USE_32_BIT 1
421#else /* no */
422#undef CONFIG_SMC_USE_32_BIT
423#endif
424
425#elif (CFG_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
426
427 /********************************************/
428 /* !!! CS8900 is __not__ tested on NIOS !!! */
429 /********************************************/
430#define CONFIG_DRIVER_CS8900 /* Using CS8900 */
431#define CS8900_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS)
432
433#if (CFG_NIOS_CPU_LAN0_BUSW == 32)
434#undef CS8900_BUS16
435#define CS8900_BUS32 1
436#else /* no */
437#define CS8900_BUS16 1
438#undef CS8900_BUS32
439#endif
440
441#else
442#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config
443#endif
444
445#define CONFIG_ETHADDR 02:80:ae:20:60:6f
446#define CONFIG_NETMASK 255.255.255.248
447#define CONFIG_IPADDR 192.168.161.84
448#define CONFIG_SERVERIP 192.168.161.85
449
450#else
451#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h
452#endif
453
454/*------------------------------------------------------------------------
455 * STATUS LEDs
456 *----------------------------------------------------------------------*/
457#if (CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO)
458
459#if (CFG_NIOS_CPU_LED_PIO == 0)
460
461#define STATUS_LED_BASE CFG_NIOS_CPU_PIO0
462#define STATUS_LED_BITS CFG_NIOS_CPU_PIO0_BITS
463#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
464
465#if (CFG_NIOS_CPU_PIO0_TYPE == 1)
466#define STATUS_LED_WRONLY 1
467#else
468#undef STATUS_LED_WRONLY
469#endif
470
471#elif (CFG_NIOS_CPU_LED_PIO == 1)
472
473#define STATUS_LED_BASE CFG_NIOS_CPU_PIO1
474#define STATUS_LED_BITS CFG_NIOS_CPU_PIO1_BITS
475#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
476
477#if (CFG_NIOS_CPU_PIO1_TYPE == 1)
478#define STATUS_LED_WRONLY 1
479#else
480#undef STATUS_LED_WRONLY
481#endif
482
483#elif (CFG_NIOS_CPU_LED_PIO == 2)
484
485#define STATUS_LED_BASE CFG_NIOS_CPU_PIO2
486#define STATUS_LED_BITS CFG_NIOS_CPU_PIO2_BITS
487#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
488
489#if (CFG_NIOS_CPU_PIO2_TYPE == 1)
490#define STATUS_LED_WRONLY 1
491#else
492#undef STATUS_LED_WRONLY
493#endif
494
495#elif (CFG_NIOS_CPU_LED_PIO == 3)
496
497#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h
498
499#elif (CFG_NIOS_CPU_LED_PIO == 4)
500
501#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h
502
503#elif (CFG_NIOS_CPU_LED_PIO == 5)
504
505#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h
506
507#elif (CFG_NIOS_CPU_LED_PIO == 6)
508
509#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h
510
511#elif (CFG_NIOS_CPU_LED_PIO == 7)
512
513#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h
514
515#elif (CFG_NIOS_CPU_LED_PIO == 8)
516
517#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h
518
519#elif (CFG_NIOS_CPU_LED_PIO == 9)
520
521#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h
522
523#else
524#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case
525#endif
526
527#define CONFIG_STATUS_LED 1 /* enable status led driver */
528
529#define STATUS_LED_BIT (1 << 0) /* LED[0] */
530#define STATUS_LED_STATE STATUS_LED_BLINKING
531#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
532#define STATUS_LED_PERIOD (CFG_HZ / 2) /* ca. 1 Hz */
533#define STATUS_LED_BOOT 0 /* boot LED */
534
535#if (STATUS_LED_BITS > 1)
536#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
537#define STATUS_LED_STATE1 STATUS_LED_OFF
538#define STATUS_LED_PERIOD1 (CFG_HZ / 10) /* ca. 5 Hz */
539#define STATUS_LED_RED 1 /* fail LED */
540#endif
541
542#if (STATUS_LED_BITS > 2)
543#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
544#define STATUS_LED_STATE2 STATUS_LED_OFF
545#define STATUS_LED_PERIOD2 (CFG_HZ / 2) /* ca. 1 Hz */
546#define STATUS_LED_YELLOW 2 /* info LED */
547#endif
548
549#if (STATUS_LED_BITS > 3)
550#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
551#define STATUS_LED_STATE3 STATUS_LED_OFF
552#define STATUS_LED_PERIOD3 (CFG_HZ / 2) /* ca. 1 Hz */
553#define STATUS_LED_GREEN 3 /* info LED */
554#endif
555
556#define STATUS_LED_PAR 1 /* makes status_led.h happy */
557
558#endif /* CFG_NIOS_CPU_PIO_NUMS */
559
560/*------------------------------------------------------------------------
561 * Diagnostics / Power On Self Tests
562 *----------------------------------------------------------------------*/
563#define CONFIG_POST CFG_POST_RTC
564#define CFG_NIOS_POST_WORD_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
565
Jon Loeliger11799432007-07-10 09:02:57 -0500566/*
567 * BOOTP options
568 */
569#define CONFIG_BOOTP_BOOTFILESIZE
570#define CONFIG_BOOTP_BOOTPATH
571#define CONFIG_BOOTP_GATEWAY
572#define CONFIG_BOOTP_HOSTNAME
573
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500574/*
575 * Command line configuration.
576 */
Jean-Christophe PLAGNIOL-VILLARD4e620412007-10-24 18:16:01 +0200577#include <config_cmd_default.h>
wdenkaaf224a2004-03-14 15:20:55 +0000578
Jean-Christophe PLAGNIOL-VILLARD4e620412007-10-24 18:16:01 +0200579#define CONFIG_CMD_BSP
580#define CONFIG_CMD_CDP
581#define CONFIG_CMD_DHCP
582#define CONFIG_CMD_DIAG
583#define CONFIG_CMD_DISPLAY
584#define CONFIG_CMD_EXT2
585#define CONFIG_CMD_IMMAP
586#define CONFIG_CMD_IRQ
587#define CONFIG_CMD_PING
588#define CONFIG_CMD_PORTIO
589#define CONFIG_CMD_REGINFO
590#define CONFIG_CMD_REISER
591#define CONFIG_CMD_SAVES
592#define CONFIG_CMD_SDRAM
593#define CONFIG_CMD_SNTP
594
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500595#undef CONFIG_CMD_NFS
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500596#undef CONFIG_CMD_XIMG
597
Jean-Christophe PLAGNIOL-VILLARD4e620412007-10-24 18:16:01 +0200598#if (CFG_NIOS_CPU_SPI_NUMS == 1)
599#define CONFIG_CMD_DATE
600#define CONFIG_CMD_SPI
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500601#endif
602
wdenkaaf224a2004-03-14 15:20:55 +0000603/*------------------------------------------------------------------------
604 * KGDB
605 *----------------------------------------------------------------------*/
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500606#if defined(CONFIG_CMD_KGDB)
wdenkaaf224a2004-03-14 15:20:55 +0000607#define CONFIG_KGDB_BAUDRATE 9600
608#endif
609
610/*------------------------------------------------------------------------
611 * MISC
612 *----------------------------------------------------------------------*/
613#define CFG_LONGHELP /* undef to save memory */
614#define CFG_HUSH_PARSER 1 /* use "hush" command parser
615 undef to save memory */
616#define CFG_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */
617#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
618#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
619#define CFG_MAXARGS 64 /* max number of command args*/
620#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
621
622#ifdef CFG_HUSH_PARSER
623#define CFG_PROMPT_HUSH_PS2 "[]> "
624#endif
625
626/* Default load address */
627#if (CFG_SRAM_SIZE != 0)
628
629/* default in SRAM */
630#define CFG_LOAD_ADDR CFG_SRAM_BASE
631
632#elif (CFG_SDRAM_SIZE != 0)
633
634/* default in SDRAM */
635#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
636#if 1
637#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
638#else
639#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x400000)
640#endif
641#else
642#define CFG_LOAD_ADDR CFG_SDRAM_BASE
643#endif
644
645#else
646#undef CFG_LOAD_ADDR /* force error break */
647#endif
648
wdenkaaf224a2004-03-14 15:20:55 +0000649/* MEM test area */
650#if (CFG_SDRAM_SIZE != 0)
651
652/* SDRAM begin to stack area (1MB stack) */
653#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE)
654#if 0
655#define CFG_MEMTEST_START (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE)
656#else
657#define CFG_MEMTEST_START (CFG_SDRAM_BASE + 0x400000)
658#endif
659#else
660#define CFG_MEMTEST_START CFG_SDRAM_BASE
661#endif
662
663#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024))
664#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024))
665
666#else
667#undef CFG_MEMTEST_START /* force error break */
668#undef CFG_MEMTEST_END
669#endif
670
Wolfgang Denk700a0c62005-08-08 01:03:24 +0200671/*
672 * JFFS2 partitions
673 *
674 */
675/* No command line, one static partition */
676#undef CONFIG_JFFS2_CMDLINE
677#define CONFIG_JFFS2_DEV "nor"
678#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
679#define CONFIG_JFFS2_PART_OFFSET 0x00000000
680
681/* mtdparts command line support */
682/*
683#define CONFIG_JFFS2_CMDLINE
684#define MTDIDS_DEFAULT ""
685#define MTDPARTS_DEFAULT ""
686*/
wdenkaaf224a2004-03-14 15:20:55 +0000687
688#endif /* __CONFIG_H */