blob: 990fd84b32af263d9084f48604c56b3960356621 [file] [log] [blame]
Heiko Schocherc0dcece2013-08-19 16:39:01 +02001/*
2 * siemens pxm2
3 * (C) Copyright 2013 Siemens Schweiz AG
4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5 *
6 * Based on:
7 * U-Boot file:/include/configs/am335x_evm.h
8 *
9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10 *
11 * SPDX-License-Identifier: GPL-2.0+
12 */
13
14#ifndef __CONFIG_PXM2_H
15#define __CONFIG_PXM2_H
16
17#define CONFIG_SIEMENS_PXM2
18#define MACH_TYPE_PXM2 4309
19#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2
20
21#include "siemens-am33x-common.h"
22
23#define CONFIG_SYS_MPUCLK 720
Egli, Samuel9fc2ed42014-04-24 17:57:52 +020024#define DDR_IOCTRL_VAL 0x18b
Heiko Schocherc0dcece2013-08-19 16:39:01 +020025#define DDR_PLL_FREQ 266
26
27#define BOARD_DFU_BUTTON_GPIO 59
Heiko Schocherc0dcece2013-08-19 16:39:01 +020028#define BOARD_LCD_POWER 111
29#define BOARD_BACK_LIGHT 112
30#define BOARD_TOUCH_POWER 57
31
Heiko Schocher61159b72015-06-16 14:59:34 +020032#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
33 "button_dfu0=59\0" \
34 "led0=117,0,1\0" \
35
Heiko Schocherc0dcece2013-08-19 16:39:01 +020036 /* Physical Memory Map */
37#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */
38
39/* I2C Configuration */
40#define CONFIG_SYS_I2C_SPEED 400000
41#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
42
Heiko Schocherc0dcece2013-08-19 16:39:01 +020043#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300
44
45#undef CONFIG_SPL_NET_SUPPORT
46#undef CONFIG_SPL_NET_VCI_STRING
47#undef CONFIG_SPL_ETH_SUPPORT
48
Heiko Schocherc0dcece2013-08-19 16:39:01 +020049#define CONFIG_PHY_ATHEROS
50
51#define CONFIG_FACTORYSET
52
Heiko Schocherc0dcece2013-08-19 16:39:01 +020053/* Watchdog */
54#define CONFIG_OMAP_WATCHDOG
55
56#ifndef CONFIG_SPL_BUILD
57
Heiko Schocher61159b72015-06-16 14:59:34 +020058/* Use common default */
59#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V1
60
Heiko Schocherc0dcece2013-08-19 16:39:01 +020061/* Default env settings */
62#define CONFIG_EXTRA_ENV_SETTINGS \
63 "hostname=pxm2\0" \
Heiko Schocher6b3943f2016-06-07 08:55:45 +020064 "ubi_off=2048\0"\
Heiko Schocherc0dcece2013-08-19 16:39:01 +020065 "nand_img_size=0x500000\0" \
66 "optargs=\0" \
Heiko Schocher61159b72015-06-16 14:59:34 +020067 "preboot=draco_led 0\0" \
68 CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
Samuel Egli56eb3da2013-11-04 14:05:03 +010069 "splashpos=m,m\0" \
Heiko Schocher61159b72015-06-16 14:59:34 +020070 CONFIG_ENV_SETTINGS_V1 \
71 CONFIG_ENV_SETTINGS_NAND_V1 \
Heiko Schocherc0dcece2013-08-19 16:39:01 +020072 "mmc_dev=0\0" \
73 "mmc_root=/dev/mmcblk0p2 rw\0" \
74 "mmc_root_fs_type=ext4 rootwait\0" \
75 "mmc_load_uimage=" \
76 "mmc rescan; " \
77 "setenv bootfile uImage;" \
78 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
79 "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
80 "importbootenv=echo Importing environment from mmc ...; " \
81 "env import -t $loadaddr $filesize\0" \
82 "mmc_args=run bootargs_defaults;" \
83 "mtdparts default;" \
84 "setenv bootargs ${bootargs} " \
85 "root=${mmc_root} ${mtdparts}" \
86 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
87 "eth=${ethaddr} " \
88 "\0" \
89 "mmc_boot=run mmc_args; " \
90 "run mmc_load_uimage; " \
91 "bootm ${kloadaddr}\0" \
92 ""
93
94#ifndef CONFIG_RESTORE_FLASH
95/* set to negative value for no autoboot */
Heiko Schocherc0dcece2013-08-19 16:39:01 +020096
97#define CONFIG_BOOTCOMMAND \
98 "if dfubutton; then " \
99 "run dfu_start; " \
100 "reset; " \
101 "fi; " \
102 "if mmc rescan; then " \
103 "echo SD/MMC found on device ${mmc_dev};" \
104 "if run loadbootenv; then " \
105 "echo Loaded environment from ${bootenv};" \
106 "run importbootenv;" \
107 "fi;" \
108 "if test -n $uenvcmd; then " \
109 "echo Running uenvcmd ...;" \
110 "run uenvcmd;" \
111 "fi;" \
112 "if run mmc_load_uimage; then " \
113 "run mmc_args;" \
114 "bootm ${kloadaddr};" \
115 "fi;" \
116 "fi;" \
117 "run nand_boot;" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100118 "reset;"
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200119
120#else
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200121
122#define CONFIG_BOOTCOMMAND \
123 "setenv autoload no; " \
124 "dhcp; " \
125 "if tftp 80000000 debrick.scr; then " \
126 "source 80000000; " \
127 "fi"
128#endif
129#endif /* CONFIG_SPL_BUILD */
130
131#define CONFIG_VIDEO
132#if defined(CONFIG_VIDEO)
133#define CONFIG_VIDEO_DA8XX
134#define CONFIG_CFB_CONSOLE
135#define CONFIG_VGA_AS_SINGLE_DEVICE
136#define CONFIG_SPLASH_SCREEN
137#define CONFIG_SPLASH_SCREEN_ALIGN
138#define CONFIG_VIDEO_LOGO
139#define CONFIG_VIDEO_BMP_RLE8
140#define CONFIG_VIDEO_BMP_LOGO
141#define CONFIG_CMD_BMP
142#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE
143#define PWM_TICKS 0x1388
144#define PWM_DUTY 0x200
Samuel Egli56eb3da2013-11-04 14:05:03 +0100145#define CONFIG_SYS_CONSOLE_BG_COL 0xff
146#define CONFIG_SYS_CONSOLE_FG_COL 0x00
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200147#endif
148
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200149#endif /* ! __CONFIG_PXM2_H */