blob: 568ce15c7b93fb74029fa69fcec3f8f8220a073b [file] [log] [blame]
wdenkab255f22002-09-18 09:04:55 +00001/*
stroese8b1ccd82004-09-16 12:34:51 +00002 * (C) Copyright 2001-2004
wdenkab255f22002-09-18 09:04:55 +00003 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
wdenkc837dcb2004-01-20 23:12:12 +000037#define CONFIG_4xx 1 /* ...member of PPC4xx family */
38#define CONFIG_AR405 1 /* ...on a AR405 board */
wdenkab255f22002-09-18 09:04:55 +000039
wdenkc837dcb2004-01-20 23:12:12 +000040#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
wdenkab255f22002-09-18 09:04:55 +000041
wdenkc837dcb2004-01-20 23:12:12 +000042#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
wdenkab255f22002-09-18 09:04:55 +000043
stroese8b1ccd82004-09-16 12:34:51 +000044#define CONFIG_BOARD_TYPES 1 /* support board types */
45
wdenkab255f22002-09-18 09:04:55 +000046#define CONFIG_BAUDRATE 9600
47#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
48
49#if 1
50#define CONFIG_BOOTCOMMAND "bootm fff00000" /* autoboot command */
51#else
52#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
53#endif
54
55#if 0
wdenkc837dcb2004-01-20 23:12:12 +000056#define CONFIG_BOOTARGS "root=/dev/nfs " \
57 "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 " \
wdenkab255f22002-09-18 09:04:55 +000058 "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
59#else
60#define CONFIG_BOOTARGS "root=/dev/hda1 " \
61 "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
62
63#endif
64
stroese8b1ccd82004-09-16 12:34:51 +000065#define CONFIG_PREBOOT /* enable preboot variable */
66
wdenkab255f22002-09-18 09:04:55 +000067#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020068#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
wdenkab255f22002-09-18 09:04:55 +000069
Ben Warren96e21f82008-10-27 23:50:15 -070070#define CONFIG_PPC4xx_EMAC
wdenkab255f22002-09-18 09:04:55 +000071#define CONFIG_MII 1 /* MII PHY management */
wdenkc837dcb2004-01-20 23:12:12 +000072#define CONFIG_PHY_ADDR 0 /* PHY address */
stroese8b1ccd82004-09-16 12:34:51 +000073#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
Ben Warren18cc7af2009-04-28 16:50:53 -070074#define CONFIG_NET_MULTI
wdenkab255f22002-09-18 09:04:55 +000075
wdenkab255f22002-09-18 09:04:55 +000076
Jon Loeliger498ff9a2007-07-05 19:13:52 -050077/*
Jon Loeliger11799432007-07-10 09:02:57 -050078 * BOOTP options
79 */
80#define CONFIG_BOOTP_BOOTFILESIZE
81#define CONFIG_BOOTP_BOOTPATH
82#define CONFIG_BOOTP_GATEWAY
83#define CONFIG_BOOTP_HOSTNAME
84
85
86/*
Jon Loeliger498ff9a2007-07-05 19:13:52 -050087 * Command line configuration.
88 */
89#include <config_cmd_default.h>
90
91#define CONFIG_CMD_DHCP
92#define CONFIG_CMD_PCI
93#define CONFIG_CMD_IRQ
94#define CONFIG_CMD_ELF
95#define CONFIG_CMD_MII
Matthias Fuchs4710cee2010-02-01 13:54:09 +010096#undef CONFIG_CMD_NFS
Jon Loeliger498ff9a2007-07-05 19:13:52 -050097#define CONFIG_CMD_PING
98#define CONFIG_CMD_BSP
99
wdenkab255f22002-09-18 09:04:55 +0000100
101#undef CONFIG_WATCHDOG /* watchdog disabled */
102
wdenkc837dcb2004-01-20 23:12:12 +0000103#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
wdenkab255f22002-09-18 09:04:55 +0000104
105/*
106 * Miscellaneous configurable options
107 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200108#define CONFIG_SYS_LONGHELP /* undef to save memory */
109#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger498ff9a2007-07-05 19:13:52 -0500110#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200111#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenkab255f22002-09-18 09:04:55 +0000112#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200113#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenkab255f22002-09-18 09:04:55 +0000114#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200115#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
116#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
117#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenkab255f22002-09-18 09:04:55 +0000118
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200119#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
stroese8b1ccd82004-09-16 12:34:51 +0000120
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200121#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
wdenkab255f22002-09-18 09:04:55 +0000122
stroese8b1ccd82004-09-16 12:34:51 +0000123#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
stroesea20b27a2004-12-16 18:05:42 +0000124#define CONFIG_LOOPW 1 /* enable loopw command */
125#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
stroese8b1ccd82004-09-16 12:34:51 +0000126
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200127#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
128#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
wdenkab255f22002-09-18 09:04:55 +0000129
Stefan Roese550650d2010-09-20 16:05:31 +0200130#define CONFIG_CONS_INDEX 1 /* Use UART0 */
131#define CONFIG_SYS_NS16550
132#define CONFIG_SYS_NS16550_SERIAL
133#define CONFIG_SYS_NS16550_REG_SIZE 1
134#define CONFIG_SYS_NS16550_CLK get_serial_clock()
135
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200136#define CONFIG_SYS_EXT_SERIAL_CLOCK 14745600 /* use external serial clock */
wdenkab255f22002-09-18 09:04:55 +0000137
138/* The following table includes the supported baudrates */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200139#define CONFIG_SYS_BAUDRATE_TABLE \
wdenk8bde7f72003-06-27 21:31:46 +0000140 { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
141 57600, 115200, 230400, 460800, 921600 }
wdenkab255f22002-09-18 09:04:55 +0000142
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200143#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
144#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
wdenkab255f22002-09-18 09:04:55 +0000145
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200146#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenkab255f22002-09-18 09:04:55 +0000147
148#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
149
150/*-----------------------------------------------------------------------
151 * PCI stuff
152 *-----------------------------------------------------------------------
153 */
wdenkc837dcb2004-01-20 23:12:12 +0000154#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
155#define PCI_HOST_FORCE 1 /* configure as pci host */
156#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
wdenkab255f22002-09-18 09:04:55 +0000157
wdenkc837dcb2004-01-20 23:12:12 +0000158#define CONFIG_PCI /* include pci support */
159#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
160#define CONFIG_PCI_PNP /* do pci plug-and-play */
161 /* resource configuration */
wdenkab255f22002-09-18 09:04:55 +0000162
wdenkc837dcb2004-01-20 23:12:12 +0000163#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
stroesead10dd92003-02-14 11:21:23 +0000164
stroesea20b27a2004-12-16 18:05:42 +0000165#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
166
wdenkc837dcb2004-01-20 23:12:12 +0000167#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
stroesead10dd92003-02-14 11:21:23 +0000168
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200169#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
170#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0403 /* PCI Device ID: ARISTO405 */
171#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
172#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
173#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
174#define CONFIG_SYS_PCI_PTM2LA 0xfff00000 /* point to flash */
175#define CONFIG_SYS_PCI_PTM2MS 0xfff00001 /* 1MB, enable */
176#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
wdenkab255f22002-09-18 09:04:55 +0000177
178/*-----------------------------------------------------------------------
179 * Start addresses for the final memory configuration
180 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200181 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenkab255f22002-09-18 09:04:55 +0000182 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200183#define CONFIG_SYS_SDRAM_BASE 0x00000000
Matthias Fuchsf3dc7f12010-07-26 17:17:51 +0200184#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
185#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
186#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200187#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
wdenkab255f22002-09-18 09:04:55 +0000188
189/*
190 * For booting Linux, the board info and command line data
191 * have to be in the first 8 MB of memory, since this is
192 * the maximum mapped by the Linux kernel during initialization.
193 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200194#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenkab255f22002-09-18 09:04:55 +0000195/*-----------------------------------------------------------------------
196 * FLASH organization
197 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200198#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
199#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
wdenkab255f22002-09-18 09:04:55 +0000200
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200201#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
202#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
wdenkab255f22002-09-18 09:04:55 +0000203
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200204#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
205#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
206#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
wdenkab255f22002-09-18 09:04:55 +0000207/*
208 * The following defines are added for buggy IOP480 byte interface.
209 * All other boards should use the standard values (CPCI405 etc.)
210 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200211#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
212#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
213#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
wdenkab255f22002-09-18 09:04:55 +0000214
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200215#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
wdenkab255f22002-09-18 09:04:55 +0000216
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200217#define CONFIG_ENV_IS_IN_FLASH 1
Matthias Fuchsf3dc7f12010-07-26 17:17:51 +0200218#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200219#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
220#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
stroesea20b27a2004-12-16 18:05:42 +0000221
Matthias Fuchsf3dc7f12010-07-26 17:17:51 +0200222#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200223#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
wdenkab255f22002-09-18 09:04:55 +0000224
wdenkab255f22002-09-18 09:04:55 +0000225/*
226 * Init Memory Controller:
227 *
228 * BR0/1 and OR0/1 (FLASH)
229 */
230
stroese8b1ccd82004-09-16 12:34:51 +0000231#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
wdenkab255f22002-09-18 09:04:55 +0000232
233/*-----------------------------------------------------------------------
234 * External Bus Controller (EBC) Setup
235 */
236
wdenkc837dcb2004-01-20 23:12:12 +0000237/* Memory Bank 0 (Flash Bank 0) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238#define CONFIG_SYS_EBC_PB0AP 0x92015480
239#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
wdenkab255f22002-09-18 09:04:55 +0000240
wdenkc837dcb2004-01-20 23:12:12 +0000241/* Memory Bank 1 (CAN0, 1, 2, 3) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200242#define CONFIG_SYS_EBC_PB1AP 0x01000380 /* enable Ready, BEM=0 */
243#define CONFIG_SYS_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
wdenkab255f22002-09-18 09:04:55 +0000244
wdenkc837dcb2004-01-20 23:12:12 +0000245/* Memory Bank 2 (Expension Bus) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200246#define CONFIG_SYS_EBC_PB2AP 0x01000280 /* disable Ready, BEM=0 */
247#define CONFIG_SYS_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
wdenkab255f22002-09-18 09:04:55 +0000248
wdenkc837dcb2004-01-20 23:12:12 +0000249/* Memory Bank 3 (16552) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200250#define CONFIG_SYS_EBC_PB3AP 0x01000380 /* enable Ready, BEM=0 */
251#define CONFIG_SYS_EBC_PB3CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
wdenkab255f22002-09-18 09:04:55 +0000252
wdenkc837dcb2004-01-20 23:12:12 +0000253/* Memory Bank 4 (FPGA regs) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200254#define CONFIG_SYS_EBC_PB4AP 0x01005380 /* enable Ready, BEM=0 */
255#define CONFIG_SYS_EBC_PB4CR 0xF031C000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=32bit */
wdenkab255f22002-09-18 09:04:55 +0000256
wdenkc837dcb2004-01-20 23:12:12 +0000257/* Memory Bank 5 (Flash Bank 1/DUMMY) initialization */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200258#define CONFIG_SYS_EBC_PB5AP 0x92015480
259#define CONFIG_SYS_EBC_PB5CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
wdenkab255f22002-09-18 09:04:55 +0000260
261/*-----------------------------------------------------------------------
stroesec5d22902003-07-11 08:13:25 +0000262 * Definitions for initial stack pointer and data area (in data cache)
wdenkab255f22002-09-18 09:04:55 +0000263 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200264#define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */
wdenkab255f22002-09-18 09:04:55 +0000265
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200266#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */
267#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
268#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
269#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
270#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenkab255f22002-09-18 09:04:55 +0000271
272/*
273 * Internal Definitions
274 *
275 * Boot Flags
276 */
277#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
278#define BOOTFLAG_WARM 0x02 /* Software reboot */
279
280#endif /* __CONFIG_H */