blob: e4250616c2858943110fcabefa56513a32eee634 [file] [log] [blame]
wdenke3093092002-10-01 01:07:28 +00001/*
2 * (C) Copyright 2002
3 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
4 *
5 * Influenced by code from:
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27#include <common.h>
28#include <spi.h>
29
30#if defined(CONFIG_SOFT_SPI)
31
wdenke3093092002-10-01 01:07:28 +000032/*-----------------------------------------------------------------------
33 * Definitions
34 */
35
36#ifdef DEBUG_SPI
37#define PRINTD(fmt,args...) printf (fmt ,##args)
38#else
39#define PRINTD(fmt,args...)
40#endif
41
42
wdenke3093092002-10-01 01:07:28 +000043/*=====================================================================*/
44/* Public Functions */
45/*=====================================================================*/
46
47/*-----------------------------------------------------------------------
48 * Initialization
49 */
50void spi_init (void)
51{
52#ifdef SPI_INIT
53 volatile immap_t *immr = (immap_t *)CFG_IMMR;
54
55 SPI_INIT;
56#endif
57}
58
59
60/*-----------------------------------------------------------------------
61 * SPI transfer
62 *
63 * This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks
64 * "bitlen" bits in the SPI MISO port. That's just the way SPI works.
65 *
66 * The source of the outgoing bits is the "dout" parameter and the
67 * destination of the input bits is the "din" parameter. Note that "dout"
68 * and "din" can point to the same memory location, in which case the
69 * input data overwrites the output data (since both are buffered by
70 * temporary variables, this is OK).
71 *
72 * If the chipsel() function is not NULL, it is called with a parameter
73 * of '1' (chip select active) at the start of the transfer and again with
74 * a parameter of '0' at the end of the transfer.
75 *
76 * If the chipsel() function _is_ NULL, it the responsibility of the
77 * caller to make the appropriate chip select active before calling
78 * spi_xfer() and making it inactive after spi_xfer() returns.
79 */
80int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
81{
John Otkend4024bb2007-07-26 17:49:11 +020082#ifdef CFG_IMMR
wdenke3093092002-10-01 01:07:28 +000083 volatile immap_t *immr = (immap_t *)CFG_IMMR;
John Otkend4024bb2007-07-26 17:49:11 +020084#endif
wdenke3093092002-10-01 01:07:28 +000085 uchar tmpdin = 0;
86 uchar tmpdout = 0;
87 int j;
88
89 PRINTD("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
90 (int)chipsel, *(uint *)dout, *(uint *)din, bitlen);
91
92 if(chipsel != NULL) {
93 (*chipsel)(1); /* select the target chip */
94 }
95
96 for(j = 0; j < bitlen; j++) {
97 /*
98 * Check if it is time to work on a new byte.
99 */
100 if((j % 8) == 0) {
101 tmpdout = *dout++;
102 if(j != 0) {
103 *din++ = tmpdin;
104 }
105 tmpdin = 0;
106 }
107 SPI_SCL(0);
108 SPI_SDA(tmpdout & 0x80);
109 SPI_DELAY;
110 SPI_SCL(1);
111 SPI_DELAY;
112 tmpdin <<= 1;
113 tmpdin |= SPI_READ;
114 tmpdout <<= 1;
115 }
116 /*
117 * If the number of bits isn't a multiple of 8, shift the last
118 * bits over to left-justify them. Then store the last byte
119 * read in.
120 */
121 if((bitlen % 8) != 0)
122 tmpdin <<= 8 - (bitlen % 8);
123 *din++ = tmpdin;
124
125 SPI_SCL(0); /* SPI wants the clock left low for idle */
126
127 if(chipsel != NULL) {
128 (*chipsel)(0); /* deselect the target chip */
129
130 }
131
132 return(0);
133}
134
135#endif /* CONFIG_SOFT_SPI */