blob: bc36fc77ee5b5ab3ba9c0637b7edbb22dd18e6c3 [file] [log] [blame]
Jagan Tekia5b9f8c2016-12-13 17:56:52 +01001/*
2 * Copyright (C) 2016 Amarula Solutions B.V.
3 * Copyright (C) 2016 Engicam S.r.l.
4 * Author: Jagan Teki <jagan@amarulasolutions.com>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#include <common.h>
Jagan Teki08273bc2017-05-07 02:43:03 +053010#include <mmc.h>
Jagan Tekia5b9f8c2016-12-13 17:56:52 +010011
12#include <asm/io.h>
13#include <asm/gpio.h>
14#include <linux/sizes.h>
15
16#include <asm/arch/clock.h>
Jagan Teki084cbb62016-12-13 17:56:55 +010017#include <asm/arch/crm_regs.h>
Jagan Tekia5b9f8c2016-12-13 17:56:52 +010018#include <asm/arch/iomux.h>
19#include <asm/arch/mx6-pins.h>
20#include <asm/arch/sys_proto.h>
Stefano Babic552a8482017-06-29 10:16:06 +020021#include <asm/mach-imx/iomux-v3.h>
Jagan Tekia5b9f8c2016-12-13 17:56:52 +010022
Jagan Tekiac880e72017-05-07 02:43:14 +053023#include "../common/board.h"
24
Jagan Tekia5b9f8c2016-12-13 17:56:52 +010025DECLARE_GLOBAL_DATA_PTR;
26
Jagan Teki084cbb62016-12-13 17:56:55 +010027#ifdef CONFIG_NAND_MXS
28
29#define GPMI_PAD_CTRL0 (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
30#define GPMI_PAD_CTRL1 (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
31 PAD_CTL_SRE_FAST)
32#define GPMI_PAD_CTRL2 (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
33
34static iomux_v3_cfg_t const nand_pads[] = {
Jagan Teki671f4582017-05-07 02:43:09 +053035 IOMUX_PADS(PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
36 IOMUX_PADS(PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
37 IOMUX_PADS(PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
38 IOMUX_PADS(PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
39 IOMUX_PADS(PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
40 IOMUX_PADS(PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
41 IOMUX_PADS(PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
42 IOMUX_PADS(PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
43 IOMUX_PADS(PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
44 IOMUX_PADS(PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
45 IOMUX_PADS(PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
46 IOMUX_PADS(PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
47 IOMUX_PADS(PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
48 IOMUX_PADS(PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
49 IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
Jagan Teki084cbb62016-12-13 17:56:55 +010050};
51
Jagan Tekiac880e72017-05-07 02:43:14 +053052void setup_gpmi_nand(void)
Jagan Teki084cbb62016-12-13 17:56:55 +010053{
54 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
55
56 /* config gpmi nand iomux */
Jagan Teki671f4582017-05-07 02:43:09 +053057 SETUP_IOMUX_PADS(nand_pads);
Jagan Teki084cbb62016-12-13 17:56:55 +010058
59 clrbits_le32(&mxc_ccm->CCGR4,
60 MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
61 MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
62 MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
63 MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
64 MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
65
66 /*
67 * config gpmi and bch clock to 100 MHz
68 * bch/gpmi select PLL2 PFD2 400M
69 * 100M = 400M / 4
70 */
71 clrbits_le32(&mxc_ccm->cscmr1,
72 MXC_CCM_CSCMR1_BCH_CLK_SEL |
73 MXC_CCM_CSCMR1_GPMI_CLK_SEL);
74 clrsetbits_le32(&mxc_ccm->cscdr1,
75 MXC_CCM_CSCDR1_BCH_PODF_MASK |
76 MXC_CCM_CSCDR1_GPMI_PODF_MASK,
77 (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
78 (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
79
80 /* enable gpmi and bch clock gating */
81 setbits_le32(&mxc_ccm->CCGR4,
82 MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
83 MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
84 MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
85 MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
86 MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
87
88 /* enable apbh clock gating */
89 setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
90}
91#endif /* CONFIG_NAND_MXS */
92
Jagan Tekif9247562017-05-07 02:43:15 +053093void setenv_fdt_file(void)
Jagan Teki97864962017-05-07 02:43:02 +053094{
Jagan Teki6f1f3f52017-05-07 02:43:04 +053095 if (is_mx6ul())
96 setenv("fdt_file", "imx6ul-geam-kit.dtb");
Jagan Teki97864962017-05-07 02:43:02 +053097}
98
Jagan Tekia5b9f8c2016-12-13 17:56:52 +010099#ifdef CONFIG_SPL_BUILD
Jagan Tekia5b9f8c2016-12-13 17:56:52 +0100100/* MMC board initialization is needed till adding DM support in SPL */
101#if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
102#include <mmc.h>
103#include <fsl_esdhc.h>
104
105#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
106 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
107 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
108
109static iomux_v3_cfg_t const usdhc1_pads[] = {
Jagan Teki671f4582017-05-07 02:43:09 +0530110 IOMUX_PADS(PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
111 IOMUX_PADS(PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
112 IOMUX_PADS(PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
113 IOMUX_PADS(PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
114 IOMUX_PADS(PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
115 IOMUX_PADS(PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
Jagan Tekia5b9f8c2016-12-13 17:56:52 +0100116
117 /* VSELECT */
Jagan Teki671f4582017-05-07 02:43:09 +0530118 IOMUX_PADS(PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
Jagan Tekia5b9f8c2016-12-13 17:56:52 +0100119 /* CD */
Jagan Teki671f4582017-05-07 02:43:09 +0530120 IOMUX_PADS(PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
Jagan Tekia5b9f8c2016-12-13 17:56:52 +0100121 /* RST_B */
Jagan Teki671f4582017-05-07 02:43:09 +0530122 IOMUX_PADS(PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
Jagan Tekia5b9f8c2016-12-13 17:56:52 +0100123};
124
125#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 1)
126
127struct fsl_esdhc_cfg usdhc_cfg[1] = {
128 {USDHC1_BASE_ADDR, 0, 4},
129};
130
131int board_mmc_getcd(struct mmc *mmc)
132{
133 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
134 int ret = 0;
135
136 switch (cfg->esdhc_base) {
137 case USDHC1_BASE_ADDR:
138 ret = !gpio_get_value(USDHC1_CD_GPIO);
139 break;
140 }
141
142 return ret;
143}
144
145int board_mmc_init(bd_t *bis)
146{
147 int i, ret;
148
149 /*
150 * According to the board_mmc_init() the following map is done:
151 * (U-boot device node) (Physical Port)
152 * mmc0 USDHC1
153 */
154 for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
155 switch (i) {
156 case 0:
Jagan Teki671f4582017-05-07 02:43:09 +0530157 SETUP_IOMUX_PADS(usdhc1_pads);
Jagan Tekia5b9f8c2016-12-13 17:56:52 +0100158 gpio_direction_input(USDHC1_CD_GPIO);
159 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
160 break;
161 default:
162 printf("Warning - USDHC%d controller not supporting\n",
163 i + 1);
164 return 0;
165 }
166
167 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
168 if (ret) {
169 printf("Warning: failed to initialize mmc dev %d\n", i);
170 return ret;
171 }
172 }
173
174 return 0;
175}
176#endif /* CONFIG_FSL_ESDHC */
Jagan Tekia5b9f8c2016-12-13 17:56:52 +0100177#endif /* CONFIG_SPL_BUILD */