blob: 2f6ea9f3f6a2a0e5762c07412ee9d6251935413e [file] [log] [blame]
Samuel Hollande210ec02020-10-24 10:21:55 -05001// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
3// Based on sun50i-a64-pine64.dts, which is:
4// Copyright (c) 2016 ARM Ltd.
Andre Przywaradf3ebdc2018-07-04 14:16:39 +01005
6/dts-v1/;
7
8#include "sun50i-a64-sopine.dtsi"
9
10/ {
11 model = "SoPine with baseboard";
12 compatible = "pine64,sopine-baseboard", "pine64,sopine",
13 "allwinner,sun50i-a64";
14
15 aliases {
16 ethernet0 = &emac;
17 serial0 = &uart0;
Samuel Hollande210ec02020-10-24 10:21:55 -050018 serial1 = &uart1;
19 serial2 = &uart2;
20 serial3 = &uart3;
21 serial4 = &uart4;
Andre Przywaradf3ebdc2018-07-04 14:16:39 +010022 };
23
24 chosen {
25 stdout-path = "serial0:115200n8";
26 };
27
Andre Przywara1b39a182018-10-29 00:56:47 +000028 hdmi-connector {
29 compatible = "hdmi-connector";
30 type = "a";
31
32 port {
33 hdmi_con_in: endpoint {
34 remote-endpoint = <&hdmi_out_con>;
35 };
36 };
37 };
38
Andre Przywaradf3ebdc2018-07-04 14:16:39 +010039 reg_vcc1v8: vcc1v8 {
40 compatible = "regulator-fixed";
41 regulator-name = "vcc1v8";
42 regulator-min-microvolt = <1800000>;
43 regulator-max-microvolt = <1800000>;
44 };
45};
46
Samuel Hollande210ec02020-10-24 10:21:55 -050047&ac_power_supply {
48 status = "okay";
49};
50
51&battery_power_supply {
52 status = "okay";
53};
54
55&codec {
56 status = "okay";
57};
58
59&codec_analog {
60 status = "okay";
61};
62
63&dai {
64 status = "okay";
65};
66
Andre Przywara1b39a182018-10-29 00:56:47 +000067&de {
68 status = "okay";
69};
70
Andre Przywaradf3ebdc2018-07-04 14:16:39 +010071&ehci0 {
72 status = "okay";
73};
74
75&ehci1 {
76 status = "okay";
77};
78
79&emac {
80 pinctrl-names = "default";
81 pinctrl-0 = <&rgmii_pins>;
82 phy-mode = "rgmii";
83 phy-handle = <&ext_rgmii_phy>;
84 phy-supply = <&reg_dc1sw>;
85 status = "okay";
86};
87
Andre Przywara1b39a182018-10-29 00:56:47 +000088&hdmi {
89 hvcc-supply = <&reg_dldo1>;
90 status = "okay";
91};
92
93&hdmi_out {
94 hdmi_out_con: endpoint {
95 remote-endpoint = <&hdmi_con_in>;
96 };
97};
98
Andre Przywaradf3ebdc2018-07-04 14:16:39 +010099&mdio {
100 ext_rgmii_phy: ethernet-phy@1 {
101 compatible = "ethernet-phy-ieee802.3-c22";
102 reg = <1>;
103 };
104};
105
106&mmc2 {
107 pinctrl-names = "default";
108 pinctrl-0 = <&mmc2_pins>;
109 vmmc-supply = <&reg_dcdc1>;
110 vqmmc-supply = <&reg_vcc1v8>;
111 bus-width = <8>;
112 non-removable;
113 cap-mmc-hw-reset;
114 status = "okay";
115};
116
117&ohci0 {
118 status = "okay";
119};
120
121&ohci1 {
122 status = "okay";
123};
124
125&reg_dc1sw {
Samuel Hollande210ec02020-10-24 10:21:55 -0500126 /*
127 * Ethernet PHY needs 30ms to properly power up and some more
128 * to initialize. 100ms should be plenty of time to finish
129 * whole process.
130 */
131 regulator-enable-ramp-delay = <100000>;
Andre Przywaradf3ebdc2018-07-04 14:16:39 +0100132 regulator-name = "vcc-phy";
133};
134
135&reg_dldo1 {
136 regulator-min-microvolt = <3300000>;
137 regulator-max-microvolt = <3300000>;
138 regulator-name = "vcc-hdmi";
139};
140
141&reg_dldo2 {
142 regulator-min-microvolt = <3300000>;
143 regulator-max-microvolt = <3300000>;
144 regulator-name = "vcc-mipi";
145};
146
147&reg_dldo4 {
148 regulator-min-microvolt = <3300000>;
149 regulator-max-microvolt = <3300000>;
150 regulator-name = "vcc-wifi";
151};
152
Andre Przywara1b39a182018-10-29 00:56:47 +0000153&simplefb_hdmi {
154 vcc-hdmi-supply = <&reg_dldo1>;
155};
156
Samuel Hollande210ec02020-10-24 10:21:55 -0500157&sound {
158 simple-audio-card,aux-devs = <&codec_analog>;
159 simple-audio-card,widgets = "Microphone", "Microphone Jack",
160 "Headphone", "Headphone Jack";
161 simple-audio-card,routing =
162 "Left DAC", "AIF1 Slot 0 Left",
163 "Right DAC", "AIF1 Slot 0 Right",
164 "Headphone Jack", "HP",
165 "AIF1 Slot 0 Left ADC", "Left ADC",
166 "AIF1 Slot 0 Right ADC", "Right ADC",
167 "MIC2", "Microphone Jack";
168 status = "okay";
169};
170
Andre Przywaradf3ebdc2018-07-04 14:16:39 +0100171&uart0 {
172 pinctrl-names = "default";
Andre Przywara1b39a182018-10-29 00:56:47 +0000173 pinctrl-0 = <&uart0_pb_pins>;
Andre Przywaradf3ebdc2018-07-04 14:16:39 +0100174 status = "okay";
175};
176
Samuel Hollande210ec02020-10-24 10:21:55 -0500177/* On Pi-2 connector */
178&uart2 {
179 pinctrl-names = "default";
180 pinctrl-0 = <&uart2_pins>;
181 status = "disabled";
182};
183
184/* On Euler connector */
185&uart3 {
186 pinctrl-names = "default";
187 pinctrl-0 = <&uart3_pins>;
188 status = "disabled";
189};
190
191/* On Euler connector, RTS/CTS optional */
192&uart4 {
193 pinctrl-names = "default";
194 pinctrl-0 = <&uart4_pins>;
195 status = "disabled";
196};
197
Andre Przywaradf3ebdc2018-07-04 14:16:39 +0100198&usb_otg {
199 dr_mode = "host";
200 status = "okay";
201};
202
203&usbphy {
204 status = "okay";
205};