blob: 87b29f89016e15b17b5d4377a225c687234e0d60 [file] [log] [blame]
Sergey Kostanbaev7237d222014-06-25 23:44:29 +04001/*
2 * U-boot - Configuration file for Cirrus Logic EDB93xx boards
3 */
4
5#ifndef __CONFIG_H
6#define __CONFIG_H
7
8#ifdef CONFIG_MK_edb9301
9#define CONFIG_EDB9301
10#elif defined(CONFIG_MK_edb9302)
11#define CONFIG_EDB9302
12#elif defined(CONFIG_MK_edb9302a)
13#define CONFIG_EDB9302A
14#elif defined(CONFIG_MK_edb9307)
15#define CONFIG_EDB9307
16#elif defined(CONFIG_MK_edb9307a)
17#define CONFIG_EDB9307A
18#elif defined(CONFIG_MK_edb9312)
19#define CONFIG_EDB9312
20#elif defined(CONFIG_MK_edb9315)
21#define CONFIG_EDB9315
22#elif defined(CONFIG_MK_edb9315a)
23#define CONFIG_EDB9315A
24#else
25#error "no board defined"
26#endif
27
28/* Initial environment and monitor configuration options. */
29#define CONFIG_BOOTDELAY 2
30#define CONFIG_CMDLINE_TAG 1
31#define CONFIG_INITRD_TAG 1
32#define CONFIG_SETUP_MEMORY_TAGS 1
33#define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
34#define CONFIG_BOOTFILE "edb93xx.img"
35
36#define CONFIG_SYS_HUSH_PARSER 1
37#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
38
39
40#define CONFIG_SYS_LDSCRIPT "board/cirrus/edb93xx/u-boot.lds"
41
42
43#ifdef CONFIG_EDB9301
44#define CONFIG_EP9301
45#define CONFIG_MACH_TYPE MACH_TYPE_EDB9301
46#define CONFIG_SYS_PROMPT "EDB9301> "
47#define CONFIG_ENV_SECT_SIZE 0x00020000
48#elif defined(CONFIG_EDB9302)
49#define CONFIG_EP9302
50#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302
51#define CONFIG_SYS_PROMPT "EDB9302> "
52#define CONFIG_ENV_SECT_SIZE 0x00020000
53#elif defined(CONFIG_EDB9302A)
54#define CONFIG_EP9302
55#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A
56#define CONFIG_SYS_PROMPT "EDB9302A> "
57#define CONFIG_ENV_SECT_SIZE 0x00020000
58#elif defined(CONFIG_EDB9307)
59#define CONFIG_EP9307
60#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307
61#define CONFIG_SYS_PROMPT "EDB9307> "
62#define CONFIG_ENV_SECT_SIZE 0x00040000
63#elif defined(CONFIG_EDB9307A)
64#define CONFIG_EP9307
65#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A
66#define CONFIG_SYS_PROMPT "EDB9307A> "
67#define CONFIG_ENV_SECT_SIZE 0x00020000
68#elif defined(CONFIG_EDB9312)
69#define CONFIG_EP9312
70#define CONFIG_MACH_TYPE MACH_TYPE_EDB9312
71#define CONFIG_SYS_PROMPT "EDB9312> "
72#define CONFIG_ENV_SECT_SIZE 0x00040000
73#elif defined(CONFIG_EDB9315)
74#define CONFIG_EP9315
75#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315
76#define CONFIG_SYS_PROMPT "EDB9315> "
77#define CONFIG_ENV_SECT_SIZE 0x00040000
78#elif defined(CONFIG_EDB9315A)
79#define CONFIG_EP9315
80#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A
81#define CONFIG_SYS_PROMPT "EDB9315A> "
82#define CONFIG_ENV_SECT_SIZE 0x00020000
83#else
84#error "no board defined"
85#endif
86
87/* High-level configuration options */
Masahiro Yamadaf2168442014-11-06 14:59:35 +090088#define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */
Sergey Kostanbaev7237d222014-06-25 23:44:29 +040089
90#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
Sergey Kostanbaev7237d222014-06-25 23:44:29 +040091#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */
92
93/* Monitor configuration */
Sergey Kostanbaev7237d222014-06-25 23:44:29 +040094#undef CONFIG_CMD_DATE
95#define CONFIG_CMD_DHCP
96#define CONFIG_CMD_JFFS2
97
98#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */
99#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
100/* Print buffer size */
101#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
102/* Boot argument buffer size */
103#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
104#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
105
106/* Serial port hardware configuration */
107#define CONFIG_PL010_SERIAL
108#define CONFIG_CONS_INDEX 0
109#define CONFIG_BAUDRATE 115200
110#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, \
111 115200, 230400}
112#define CONFIG_SYS_SERIAL0 0x808C0000
113#define CONFIG_SYS_SERIAL1 0x808D0000
114/*#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
115 (void *)CONFIG_SYS_SERIAL1} */
116
117#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0}
118
119/* Status LED */
120#define CONFIG_STATUS_LED 1 /* Status LED enabled */
121#define CONFIG_BOARD_SPECIFIC_LED 1
122#define STATUS_LED_GREEN 0
123#define STATUS_LED_RED 1
124/* Green */
125#define STATUS_LED_BIT STATUS_LED_GREEN
126#define STATUS_LED_STATE STATUS_LED_ON
127#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
128/* Red */
129#define STATUS_LED_BIT1 STATUS_LED_RED
130#define STATUS_LED_STATE1 STATUS_LED_OFF
131#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
132/* Optional value */
133#define STATUS_LED_BOOT STATUS_LED_BIT
134
135/* Network hardware configuration */
136#define CONFIG_DRIVER_EP93XX_MAC
137#define CONFIG_MII_SUPPRESS_PREAMBLE
138#define CONFIG_MII
139#define CONFIG_PHY_ADDR 1
Sergey Kostanbaev7237d222014-06-25 23:44:29 +0400140#undef CONFIG_NETCONSOLE
141
142/* SDRAM configuration */
143#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
144 defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
145 defined(CONFIG_EDB9315)
146/*
147 * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
148 * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
149 * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
150 *
151 * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
152 * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
153 * 64 MB of SDRAM.
154 */
155
156#define CONFIG_EDB93XX_SDCS3
157
158#elif defined(CONFIG_EDB9302A) || \
159 defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
160/*
161 * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
162 * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
163 * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
164 *
165 * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
166 * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
167 */
168#define CONFIG_EDB93XX_SDCS0
169
170#else
171#error "no SDCS configuration for this board"
172#endif
173
174
175#if defined(CONFIG_EDB93XX_SDCS3)
176#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Default load address */
177#define PHYS_SDRAM_1 0x00000000
178#elif defined(CONFIG_EDB93XX_SDCS0)
179#define CONFIG_SYS_LOAD_ADDR 0xc1000000 /* Default load address */
180#define PHYS_SDRAM_1 0xc0000000
181#endif
182
183#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
184#define CONFIG_NR_DRAM_BANKS 8
185
186#define CONFIG_SYS_INIT_SP_ADDR \
187 (CONFIG_SYS_SDRAM_BASE + 32*1024 - GENERATED_GBL_DATA_SIZE)
188
189
190/* Must match kernel config */
191#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
192
193/* Run-time memory allocatons */
194#define CONFIG_SYS_GBL_DATA_SIZE 128
195#define CONFIG_STACKSIZE (128 * 1024)
196
197#if defined(CONFIG_USE_IRQ)
198#define CONFIG_STACKSIZE_IRQ (4 * 1024)
199#define CONFIG_STACKSIZE_FIQ (4 * 1024)
200#endif
201
202#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
203
204/* -----------------------------------------------------------------------------
205 * FLASH and environment organization
206 *
207 * The EDB9301, EDB9302(a), EDB9307a, EDB9315a have 1 bank of flash memory at
208 * 0x60000000 consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit
209 * data bus, for a total of 16 MB of CFI-compatible flash.
210 *
211 * The EDB9307, EDB9312, and EDB9315 have 1 bank of flash memory at
212 * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
213 * data bus, for a total of 32 MB of CFI-compatible flash.
214 *
215 *
216 * EDB9301/02(a)7a/15a EDB9307/12/15
217 * 0x60000000 - 0x0003FFFF u-boot u-boot
218 * 0x60040000 - 0x0005FFFF environment #1 environment #1
219 * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued)
220 * 0x60080000 - 0x0009FFFF unused environment #2
221 * 0x600A0000 - 0x000BFFFF unused environment #2 (continued)
222 * 0x600C0000 - 0x00FFFFFF unused unused
223 * 0x61000000 - 0x01FFFFFF not present unused
224 */
225#define CONFIG_SYS_FLASH_CFI
226#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
227
228
229#define CONFIG_SYS_FLASH_PROTECTION
230#define CONFIG_FLASH_CFI_DRIVER
231#define CONFIG_SYS_MAX_FLASH_BANKS 1
232#define CONFIG_SYS_MAX_FLASH_SECT (256+8)
233
234#define CONFIG_SYS_TEXT_BASE 0x60000000
235#define PHYS_FLASH_1 CONFIG_SYS_TEXT_BASE
236#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
237
238#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
239#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
240
241#define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */
242#define CONFIG_ENV_IS_IN_FLASH
243
244#define CONFIG_ENV_ADDR 0x60040000
245#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
246
247#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
248#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
249
250/* Define to enable MMC on SPI support */
251/* #define CONFIG_EP93XX_SPI_MMC */
252
253#ifdef CONFIG_EP93XX_SPI_MMC
254#define CONFIG_EP93XX_SPI
255#define CONFIG_MMC
256#define CONFIG_GENERIC_MMC
257#define CONFIG_MMC_SPI
258#define CONFIG_CMD_MMC
259#define CONFIG_MMC_SPI_NPOWER_EGPIO 9
260#endif
261
262#define CONFIG_USB_STORAGE
263#define CONFIG_USB_OHCI_NEW
264#define CONFIG_USB_OHCI_EP93XX
265#define CONFIG_SYS_USB_OHCI_CPU_INIT
266#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
267#define CONFIG_SYS_USB_OHCI_SLOT_NAME "ep93xx-ohci"
268#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x80020000
269
270#define CONFIG_CMD_EXT2
271#define CONFIG_CMD_EXT4
272#define CONFIG_CMD_FAT
273#define CONFIG_CMD_USB
274
275#define CONFIG_BOARD_EARLY_INIT_F
276#define CONFIG_CMD_BOOTZ
277
278/* Define to disable flash configuration*/
279/* #define CONFIG_EP93XX_NO_FLASH_CFG */
280
281/* Define this for indusrial rated chips */
282/* #define CONFIG_EDB93XX_INDUSTRIAL */
283
284#endif /* !defined (__CONFIG_H) */