Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 5992f2579739c421cbdc1b6dd0054c636f376ba0 / . / arch / arm / dts / imx6q-display5.dts
blob: 4e2aa363edaad702f58e9b67541b79fd4e8c0d76 [file] [log] [blame]
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100[diff] [blame]1/*
2 * Copyright 2017
3 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundation.
8 *
9 */
10
11/dts-v1/;
12
Lukasz Majewski7736a6e2019-06-09 22:54:42 +0200[diff] [blame]13#include <dt-bindings/gpio/gpio.h>
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100[diff] [blame]14#include "imx6q.dtsi"
15
16/ {
17 model = "Liebherr (LWN) display5 i.MX6 Quad Board";
18 compatible = "lwn,display5", "fsl,imx6q";
Lukasz Majewski7736a6e2019-06-09 22:54:42 +0200[diff] [blame]19
20 memory@10000000 {
21 device_type = "memory";
22 reg = <0x10000000 0x40000000>;
23 };
24};
25
26&ecspi2 {
27 cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
28 pinctrl-names = "default";
29 pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>;
30 status = "okay";
31
32 s25fl256s: flash@0 {
33 #address-cells = <1>;
34 #size-cells = <1>;
35 compatible = "jedec,spi-nor";
36 spi-max-frequency = <40000000>;
37 reg = <0>;
38
39 partition@0 {
40 label = "SPL (spi)";
41 reg = <0x0 0x20000>;
42 read-only;
43 };
44 partition@1 {
45 label = "u-boot (spi)";
46 reg = <0x20000 0x100000>;
47 read-only;
48 };
49 partition@2 {
50 label = "uboot-env (spi)";
51 reg = <0x120000 0x10000>;
52 };
53 partition@3 {
54 label = "uboot-envr (spi)";
55 reg = <0x130000 0x10000>;
56 };
57 partition@4 {
58 label = "linux-recovery (spi)";
59 reg = <0x140000 0x800000>;
60 };
61 partition@5 {
62 label = "swupdate-fitImg (spi)";
63 reg = <0x940000 0x400000>;
64 };
65 partition@6 {
66 label = "swupdate-initramfs (spi)";
67 reg = <0xD40000 0x800000>;
68 };
69 };
70};
71
72&ecspi3 {
73 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
74 pinctrl-names = "default";
75 pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
76 status = "okay";
77};
78
79&fec {
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_enet>;
82 phy-handle = <&ethernet_phy0>;
83 phy-mode = "rgmii-id";
84 status = "okay";
85
86 mdio {
87 #address-cells = <1>;
88 #size-cells = <0>;
89 ethernet_phy0: ethernet-phy@0 {
90 compatible = "marvell,88E1510";
91 device_type = "ethernet-phy";
92 /* Set LED0 control: */
93 /* On - Link, Blink - Activity, Off - No Link */
94 marvell,reg-init = <3 0x10 0 0x1011>;
95 max-speed = <100>;
96 reg = <0>;
97 };
98 };
99};
100
101&i2c1 {
102 clock-frequency = <400000>;
103 pinctrl-names = "default";
104 pinctrl-0 = <&pinctrl_i2c1>;
105 status = "okay";
106
107 codec: tfa9879@6c {
108 #sound-dai-cells = <0>;
109 compatible = "nxp,tfa9879";
110 reg = <0x6C>;
111 };
112};
113
114&i2c2 {
115 clock-frequency = <400000>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&pinctrl_i2c2>;
118 status = "okay";
119};
120
121&i2c3 {
122 clock-frequency = <400000>;
123 pinctrl-names = "default";
124 pinctrl-0 = <&pinctrl_i2c3>;
125 status = "okay";
126
127 at24@50 {
128 compatible = "atmel,24c256";
129 pagesize = <64>;
130 reg = <0x50>;
131 };
132
133 pfuze100: pmic@8 {
134 compatible = "fsl,pfuze100";
135 reg = <0x08>;
136
137 regulators {
138 sw1a_reg: sw1ab {
139 regulator-min-microvolt = <300000>;
140 regulator-max-microvolt = <1875000>;
141 regulator-boot-on;
142 regulator-always-on;
143 regulator-ramp-delay = <6250>;
144 };
145
146 sw1c_reg: sw1c {
147 regulator-min-microvolt = <300000>;
148 regulator-max-microvolt = <1875000>;
149 regulator-boot-on;
150 regulator-always-on;
151 regulator-ramp-delay = <6250>;
152 };
153
154 sw2_reg: sw2 {
155 regulator-min-microvolt = <800000>;
156 regulator-max-microvolt = <3950000>;
157 regulator-boot-on;
158 regulator-always-on;
159 };
160
161 sw3a_reg: sw3a {
162 regulator-min-microvolt = <400000>;
163 regulator-max-microvolt = <1975000>;
164 regulator-boot-on;
165 regulator-always-on;
166 };
167
168 sw3b_reg: sw3b {
169 regulator-min-microvolt = <400000>;
170 regulator-max-microvolt = <1975000>;
171 regulator-boot-on;
172 regulator-always-on;
173 };
174
175 sw4_reg: sw4 {
176 regulator-min-microvolt = <800000>;
177 regulator-max-microvolt = <3300000>;
178 };
179
180 swbst_reg: swbst {
181 regulator-min-microvolt = <5000000>;
182 regulator-max-microvolt = <5150000>;
183 };
184
185 snvs_reg: vsnvs {
186 regulator-min-microvolt = <1000000>;
187 regulator-max-microvolt = <3000000>;
188 regulator-boot-on;
189 regulator-always-on;
190 };
191
192 vref_reg: vrefddr {
193 regulator-boot-on;
194 regulator-always-on;
195 };
196
197 vgen1_reg: vgen1 {
198 regulator-min-microvolt = <800000>;
199 regulator-max-microvolt = <1550000>;
200 };
201
202 vgen2_reg: vgen2 {
203 regulator-min-microvolt = <800000>;
204 regulator-max-microvolt = <1550000>;
205 };
206
207 vgen3_reg: vgen3 {
208 regulator-min-microvolt = <1800000>;
209 regulator-max-microvolt = <3300000>;
210 };
211
212 vgen4_reg: vgen4 {
213 regulator-min-microvolt = <1800000>;
214 regulator-max-microvolt = <3300000>;
215 regulator-always-on;
216 };
217
218 vgen5_reg: vgen5 {
219 regulator-min-microvolt = <1800000>;
220 regulator-max-microvolt = <3300000>;
221 regulator-always-on;
222 };
223
224 vgen6_reg: vgen6 {
225 regulator-min-microvolt = <1800000>;
226 regulator-max-microvolt = <3300000>;
227 regulator-always-on;
228 };
229 };
230 };
231};
232
233&uart4 {
234 pinctrl-names = "default";
235 pinctrl-0 = <&pinctrl_uart4>;
236 uart-has-rtscts;
237 status = "okay";
238};
239
240&uart5 {
241 pinctrl-names = "default";
242 pinctrl-0 = <&pinctrl_uart5>;
243 status = "okay";
244};
245
246&usdhc4 {
247 pinctrl-names = "default";
248 pinctrl-0 = <&pinctrl_usdhc4>;
249 bus-width = <8>;
250 non-removable;
251 status = "okay";
252};
253
254&iomuxc {
255 pinctrl_ecspi2: ecspi2grp {
256 fsl,pins = <
257 MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1
258 MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1
259 MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1
260 >;
261 };
262
263 pinctrl_ecspi2_cs: ecspi2csgrp {
264 fsl,pins = <
265 MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1
266 >;
267 };
268
269 pinctrl_ecspi2_flwp: ecspi2flwpgrp {
270 fsl,pins = <
271 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
272 >;
273 };
274
275 pinctrl_ecspi3: ecspi3grp {
276 fsl,pins = <
277 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
278 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
279 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
280 >;
281 };
282
283 pinctrl_ecspi3_cs: ecspi3csgrp {
284 fsl,pins = <
285 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
286 >;
287 };
288
289 pinctrl_ecspi3_flwp: ecspi3flwpgrp {
290 fsl,pins = <
291 MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
292 >;
293 };
294
295 pinctrl_enet: enetgrp {
296 fsl,pins = <
297 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
298 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
299 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
300 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
301 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
302 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
303 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
304 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
305 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
306 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
307 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
308 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
309 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
310 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
311 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
312 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
313 MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
314 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0
315 >;
316 };
317
318 pinctrl_i2c1: i2c1grp {
319 fsl,pins = <
320 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
321 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
322 >;
323 };
324
325 pinctrl_i2c2: i2c2grp {
326 fsl,pins = <
327 MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
328 MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
329 >;
330 };
331
332 pinctrl_i2c3: i2c3grp {
333 fsl,pins = <
334 MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
335 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
336 >;
337 };
338
339 pinctrl_uart4: uart4grp {
340 fsl,pins = <
341 MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
342 MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
343 MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
344 MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
345 >;
346 };
347
348 pinctrl_uart5: uart5grp {
349 fsl,pins = <
350 MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
351 MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
352 >;
353 };
354
355 pinctrl_usdhc4: usdhc4grp {
356 fsl,pins = <
357 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
358 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
359 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
360 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
361 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
362 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
363 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
364 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
365 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
366 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
367 MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x17059
368 >;
369 };
Lukasz Majewskia3eec242017-10-31 17:58:05 +0100[diff] [blame]370};