blob: e450002e835605094d39adea2e1567e8c0ff7b8b [file] [log] [blame]
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +05301/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Copyright 2018 NXP
4 */
5
6#ifndef __LS1012AFRWY_H__
7#define __LS1012AFRWY_H__
8
9#include "ls1012a_common.h"
10
11/* Board Rev*/
Pramod Kumar1deae0c2018-08-14 09:49:55 +053012#define BOARD_REV_A_B 0x0
13#define BOARD_REV_C 0x00080000
14#define BOARD_REV_MASK 0x001A0000
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053015/* DDR */
16#define CONFIG_DIMM_SLOTS_PER_CTLR 1
17#define CONFIG_CHIP_SELECTS_PER_CTRL 1
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053018#define SYS_SDRAM_SIZE_512 0x20000000
19#define SYS_SDRAM_SIZE_1024 0x40000000
20#define CONFIG_CHIP_SELECTS_PER_CTRL 1
21#define CONFIG_CMD_MEMINFO
22#define CONFIG_CMD_MEMTEST
23#define CONFIG_SYS_MEMTEST_START 0x80000000
24#define CONFIG_SYS_MEMTEST_END 0x9fffffff
25
26#ifndef CONFIG_SPL_BUILD
27#undef BOOT_TARGET_DEVICES
28#define BOOT_TARGET_DEVICES(func) \
29 func(MMC, mmc, 0) \
30 func(USB, usb, 0)
31#endif
32
33#undef CONFIG_ENV_OFFSET
34#define CONFIG_ENV_OFFSET 0x1D0000
35#undef FSL_QSPI_FLASH_SIZE
36#define FSL_QSPI_FLASH_SIZE SZ_16M
37#undef CONFIG_ENV_SECT_SIZE
38#define CONFIG_ENV_SECT_SIZE 0x10000 /*64 KB*/
39#undef CONFIG_ENV_SIZE
40#define CONFIG_ENV_SIZE 0x10000 /*64 KB*/
41
42/* MMC */
43#ifdef CONFIG_MMC
44#define CONFIG_FSL_ESDHC
45#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
46#endif
47
48#define CONFIG_PCIE1 /* PCIE controller 1 */
49
50#define CONFIG_PCI_SCAN_SHOW
51
52#undef CONFIG_EXTRA_ENV_SETTINGS
53#define CONFIG_EXTRA_ENV_SETTINGS \
54 "verify=no\0" \
55 "fdt_high=0xffffffffffffffff\0" \
56 "initrd_high=0xffffffffffffffff\0" \
57 "fdt_addr=0x00f00000\0" \
58 "kernel_addr=0x01000000\0" \
Vinitha V Pillai2d91b532018-05-23 11:03:31 +053059 "kernel_size_sd=0x16000\0" \
60 "kernelhdr_size_sd=0x10\0" \
61 "kernel_addr_sd=0x8000\0" \
62 "kernelhdr_addr_sd=0x4000\0" \
63 "kernelheader_addr=0x1fc000\0" \
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053064 "kernelheader_addr=0x1fc000\0" \
65 "scriptaddr=0x80000000\0" \
66 "scripthdraddr=0x80080000\0" \
67 "fdtheader_addr_r=0x80100000\0" \
68 "kernelheader_addr_r=0x80200000\0" \
Vinitha V Pillai2d91b532018-05-23 11:03:31 +053069 "kernelheader_size=0x40000\0" \
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +053070 "kernel_addr_r=0x81000000\0" \
71 "fdt_addr_r=0x90000000\0" \
72 "load_addr=0x96000000\0" \
73 "kernel_size=0x2800000\0" \
74 "kernelheader_size=0x40000\0" \
75 "console=ttyS0,115200\0" \
76 BOOTENV \
77 "boot_scripts=ls1012afrwy_boot.scr\0" \
78 "boot_script_hdr=hdr_ls1012afrwy_bs.out\0" \
79 "scan_dev_for_boot_part=" \
80 "part list ${devtype} ${devnum} devplist; " \
81 "env exists devplist || setenv devplist 1; " \
82 "for distro_bootpart in ${devplist}; do " \
83 "if fstype ${devtype} " \
84 "${devnum}:${distro_bootpart} " \
85 "bootfstype; then " \
86 "run scan_dev_for_boot; " \
87 "fi; " \
88 "done\0" \
89 "scan_dev_for_boot=" \
90 "echo Scanning ${devtype} " \
91 "${devnum}:${distro_bootpart}...; " \
92 "for prefix in ${boot_prefixes}; do " \
93 "run scan_dev_for_scripts; " \
94 "done;" \
95 "\0" \
96 "boot_a_script=" \
97 "load ${devtype} ${devnum}:${distro_bootpart} " \
98 "${scriptaddr} ${prefix}${script}; " \
99 "env exists secureboot && load ${devtype} " \
100 "${devnum}:${distro_bootpart} " \
101 "${scripthdraddr} ${prefix}${boot_script_hdr} " \
102 "&& esbc_validate ${scripthdraddr};" \
103 "source ${scriptaddr}\0" \
104 "installer=load mmc 0:2 $load_addr " \
105 "/flex_installer_arm64.itb; " \
106 "bootm $load_addr#$board\0" \
107 "qspi_bootcmd=echo Trying load from qspi..;" \
108 "sf probe && sf read $load_addr " \
109 "$kernel_addr $kernel_size; env exists secureboot " \
110 "&& sf read $kernelheader_addr_r $kernelheader_addr " \
111 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
Vinitha V Pillai2d91b532018-05-23 11:03:31 +0530112 "bootm $load_addr#$board\0" \
113 "sd_bootcmd=echo Trying load from sd card..;" \
114 "mmcinfo; mmc read $load_addr " \
115 "$kernel_addr_sd $kernel_size_sd ;" \
116 "env exists secureboot && mmc read $kernelheader_addr_r "\
117 "$kernelhdr_addr_sd $kernelhdr_size_sd " \
118 " && esbc_validate ${kernelheader_addr_r};" \
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +0530119 "bootm $load_addr#$board\0"
120
121#undef CONFIG_BOOTCOMMAND
Vinitha V Pillai2d91b532018-05-23 11:03:31 +0530122#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +0530123 "env exists secureboot && esbc_halt;"
124#define CONFIG_CMD_MEMINFO
125#define CONFIG_CMD_MEMTEST
126#define CONFIG_SYS_MEMTEST_START 0x80000000
127#define CONFIG_SYS_MEMTEST_END 0x9fffffff
128
129#include <asm/fsl_secure_boot.h>
130
Vinitha V Pillai2d91b532018-05-23 11:03:31 +0530131#include <asm/fsl_secure_boot.h>
Bhaskar Upadhaya9629ccd2018-05-23 11:03:30 +0530132#endif /* __LS1012AFRWY_H__ */