blob: c861fa7e356c62d348c1c9b482c3a26afe88aeef [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
Hans de Goede53ab4af2015-04-15 19:03:49 +020019 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun4i-a10.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47
48/ {
49 model = "MK802ii";
50 compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
51
52 aliases {
53 serial0 = &uart0;
54 };
55
56 chosen {
57 stdout-path = "serial0:115200n8";
58 };
59};
60
61&ehci0 {
62 status = "okay";
63};
64
65&ehci1 {
66 status = "okay";
67};
68
69&i2c0 {
70 pinctrl-names = "default";
71 pinctrl-0 = <&i2c0_pins_a>;
72 status = "okay";
73
74 axp209: pmic@34 {
75 compatible = "x-powers,axp209";
76 reg = <0x34>;
77 interrupts = <0>;
78
79 interrupt-controller;
80 #interrupt-cells = <1>;
81 };
82};
83
84&mmc0 {
85 pinctrl-names = "default";
86 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
87 vmmc-supply = <&reg_vcc3v3>;
88 bus-width = <4>;
89 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
90 cd-inverted;
91 status = "okay";
92};
93
94&ohci0 {
95 status = "okay";
96};
97
98&reg_usb1_vbus {
99 status = "okay";
100};
101
102&reg_usb2_vbus {
103 status = "okay";
104};
105
106&uart0 {
107 pinctrl-names = "default";
108 pinctrl-0 = <&uart0_pins_a>;
109 status = "okay";
110};
111
112&usbphy {
113 usb1_vbus-supply = <&reg_usb1_vbus>;
114 usb2_vbus-supply = <&reg_usb2_vbus>;
115 status = "okay";
116};