blob: c7fc8c162d862c61cafa46390a99b0310abf8205 [file] [log] [blame]
wdenk3a473b22004-01-03 00:43:19 +00001/*
2 * (C) Copyright 2001
3 * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
4 *
5 * modified for marvell db64360 eval board by
6 * Ingo Assmus <ingo.assmus@keymile.com>
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27/* serial.h - mostly useful for DUART serial_init in serial.c */
28
29#ifndef __SERIAL_H__
30#define __SERIAL_H__
31
32#if 0
33
34#define B230400 1
35#define B115200 2
36#define B57600 4
37#define B38400 82
38#define B19200 163
39#define B9600 24
40#define B4800 651
41#define B2400 1302
42#define B1200 2604
43#define B600 5208
44#define B300 10417
45#define B150 20833
46#define B110 28409
47#define BDEFAULT B115200
48
49 /* this stuff is important to initialize
50 the DUART channels */
51
52#define Scale 0x01L /* distance between port addresses */
53#define COM1 0x000003f8 /* Keyboard */
54#define COM2 0x000002f8 /* Host */
55
56
57/* Port Definitions relative to base COM port addresses */
58#define DataIn (0x00*Scale) /* data input port */
59#define DataOut (0x00*Scale) /* data output port */
60#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */
61#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */
62#define Ier (0x01*Scale) /* interrupt enable register */
63#define Iir (0x02*Scale) /* interrupt identification register */
64#define Lcr (0x03*Scale) /* line control register */
65#define Mcr (0x04*Scale) /* modem control register */
66#define Lsr (0x05*Scale) /* line status register */
67#define Msr (0x06*Scale) /* modem status register */
68
69/* Bit Definitions for above ports */
70#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */
71#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */
72
73#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */
74#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */
75#define McrDflt (McrRts|McrDtr)
76
77#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/
78 /* b6: transmitter empty */
79#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */
80
81#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */
82#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */
83#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */
84
85#define IerRda 0xf /* b0: Enable received data available interrupt */
86
87#endif
88
89#endif /* __SERIAL_H__ */