Tom Rini | 57cd681 | 2015-07-31 19:55:12 -0400 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | * Based on "omap4.dtsi" |
| 8 | */ |
| 9 | |
| 10 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 11 | #include <dt-bindings/pinctrl/dra.h> |
| 12 | |
| 13 | #include "skeleton.dtsi" |
| 14 | |
| 15 | #define MAX_SOURCES 400 |
| 16 | |
| 17 | / { |
| 18 | #address-cells = <1>; |
| 19 | #size-cells = <1>; |
| 20 | |
| 21 | compatible = "ti,dra7xx"; |
| 22 | interrupt-parent = <&crossbar_mpu>; |
| 23 | |
| 24 | aliases { |
| 25 | i2c0 = &i2c1; |
| 26 | i2c1 = &i2c2; |
| 27 | i2c2 = &i2c3; |
| 28 | i2c3 = &i2c4; |
| 29 | i2c4 = &i2c5; |
| 30 | serial0 = &uart1; |
| 31 | serial1 = &uart2; |
| 32 | serial2 = &uart3; |
| 33 | serial3 = &uart4; |
| 34 | serial4 = &uart5; |
| 35 | serial5 = &uart6; |
| 36 | serial6 = &uart7; |
| 37 | serial7 = &uart8; |
| 38 | serial8 = &uart9; |
| 39 | serial9 = &uart10; |
| 40 | ethernet0 = &cpsw_emac0; |
| 41 | ethernet1 = &cpsw_emac1; |
| 42 | d_can0 = &dcan1; |
| 43 | d_can1 = &dcan2; |
| 44 | }; |
| 45 | |
| 46 | timer { |
| 47 | compatible = "arm,armv7-timer"; |
| 48 | interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| 49 | <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| 50 | <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, |
| 51 | <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; |
| 52 | interrupt-parent = <&gic>; |
| 53 | }; |
| 54 | |
| 55 | gic: interrupt-controller@48211000 { |
| 56 | compatible = "arm,cortex-a15-gic"; |
| 57 | interrupt-controller; |
| 58 | #interrupt-cells = <3>; |
| 59 | reg = <0x48211000 0x1000>, |
| 60 | <0x48212000 0x1000>, |
| 61 | <0x48214000 0x2000>, |
| 62 | <0x48216000 0x2000>; |
| 63 | interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| 64 | interrupt-parent = <&gic>; |
| 65 | }; |
| 66 | |
| 67 | wakeupgen: interrupt-controller@48281000 { |
| 68 | compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; |
| 69 | interrupt-controller; |
| 70 | #interrupt-cells = <3>; |
| 71 | reg = <0x48281000 0x1000>; |
| 72 | interrupt-parent = <&gic>; |
| 73 | }; |
| 74 | |
| 75 | /* |
| 76 | * The soc node represents the soc top level view. It is used for IPs |
| 77 | * that are not memory mapped in the MPU view or for the MPU itself. |
| 78 | */ |
| 79 | soc { |
| 80 | compatible = "ti,omap-infra"; |
| 81 | mpu { |
| 82 | compatible = "ti,omap5-mpu"; |
| 83 | ti,hwmods = "mpu"; |
| 84 | }; |
| 85 | }; |
| 86 | |
| 87 | /* |
| 88 | * XXX: Use a flat representation of the SOC interconnect. |
| 89 | * The real OMAP interconnect network is quite complex. |
| 90 | * Since it will not bring real advantage to represent that in DT for |
| 91 | * the moment, just use a fake OCP bus entry to represent the whole bus |
| 92 | * hierarchy. |
| 93 | */ |
| 94 | ocp { |
| 95 | compatible = "ti,dra7-l3-noc", "simple-bus"; |
| 96 | #address-cells = <1>; |
| 97 | #size-cells = <1>; |
| 98 | ranges; |
| 99 | ti,hwmods = "l3_main_1", "l3_main_2"; |
| 100 | reg = <0x44000000 0x1000000>, |
| 101 | <0x45000000 0x1000>; |
| 102 | interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| 103 | <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 104 | |
| 105 | l4_cfg: l4@4a000000 { |
| 106 | compatible = "ti,dra7-l4-cfg", "simple-bus"; |
| 107 | #address-cells = <1>; |
| 108 | #size-cells = <1>; |
| 109 | ranges = <0 0x4a000000 0x22c000>; |
| 110 | |
| 111 | scm: scm@2000 { |
| 112 | compatible = "ti,dra7-scm-core", "simple-bus"; |
| 113 | reg = <0x2000 0x2000>; |
| 114 | #address-cells = <1>; |
| 115 | #size-cells = <1>; |
| 116 | ranges = <0 0x2000 0x2000>; |
| 117 | |
| 118 | scm_conf: scm_conf@0 { |
| 119 | compatible = "syscon"; |
| 120 | reg = <0x0 0x1400>; |
| 121 | #address-cells = <1>; |
| 122 | #size-cells = <1>; |
| 123 | |
| 124 | pbias_regulator: pbias_regulator { |
| 125 | compatible = "ti,pbias-omap"; |
| 126 | reg = <0xe00 0x4>; |
| 127 | syscon = <&scm_conf>; |
| 128 | pbias_mmc_reg: pbias_mmc_omap5 { |
| 129 | regulator-name = "pbias_mmc_omap5"; |
| 130 | regulator-min-microvolt = <1800000>; |
| 131 | regulator-max-microvolt = <3000000>; |
| 132 | }; |
| 133 | }; |
| 134 | |
| 135 | scm_conf_clocks: clocks { |
| 136 | #address-cells = <1>; |
| 137 | #size-cells = <0>; |
| 138 | }; |
| 139 | }; |
| 140 | |
| 141 | dra7_pmx_core: pinmux@1400 { |
| 142 | compatible = "ti,dra7-padconf", |
| 143 | "pinctrl-single"; |
| 144 | reg = <0x1400 0x0464>; |
| 145 | #address-cells = <1>; |
| 146 | #size-cells = <0>; |
| 147 | #interrupt-cells = <1>; |
| 148 | interrupt-controller; |
| 149 | pinctrl-single,register-width = <32>; |
| 150 | pinctrl-single,function-mask = <0x3fffffff>; |
| 151 | }; |
| 152 | }; |
| 153 | |
| 154 | cm_core_aon: cm_core_aon@5000 { |
| 155 | compatible = "ti,dra7-cm-core-aon"; |
| 156 | reg = <0x5000 0x2000>; |
| 157 | |
| 158 | cm_core_aon_clocks: clocks { |
| 159 | #address-cells = <1>; |
| 160 | #size-cells = <0>; |
| 161 | }; |
| 162 | |
| 163 | cm_core_aon_clockdomains: clockdomains { |
| 164 | }; |
| 165 | }; |
| 166 | |
| 167 | cm_core: cm_core@8000 { |
| 168 | compatible = "ti,dra7-cm-core"; |
| 169 | reg = <0x8000 0x3000>; |
| 170 | |
| 171 | cm_core_clocks: clocks { |
| 172 | #address-cells = <1>; |
| 173 | #size-cells = <0>; |
| 174 | }; |
| 175 | |
| 176 | cm_core_clockdomains: clockdomains { |
| 177 | }; |
| 178 | }; |
| 179 | }; |
| 180 | |
| 181 | l4_wkup: l4@4ae00000 { |
| 182 | compatible = "ti,dra7-l4-wkup", "simple-bus"; |
| 183 | #address-cells = <1>; |
| 184 | #size-cells = <1>; |
| 185 | ranges = <0 0x4ae00000 0x3f000>; |
| 186 | |
| 187 | counter32k: counter@4000 { |
| 188 | compatible = "ti,omap-counter32k"; |
| 189 | reg = <0x4000 0x40>; |
| 190 | ti,hwmods = "counter_32k"; |
| 191 | }; |
| 192 | |
| 193 | prm: prm@6000 { |
| 194 | compatible = "ti,dra7-prm"; |
| 195 | reg = <0x6000 0x3000>; |
| 196 | interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| 197 | |
| 198 | prm_clocks: clocks { |
| 199 | #address-cells = <1>; |
| 200 | #size-cells = <0>; |
| 201 | }; |
| 202 | |
| 203 | prm_clockdomains: clockdomains { |
| 204 | }; |
| 205 | }; |
| 206 | }; |
| 207 | |
| 208 | axi@0 { |
| 209 | compatible = "simple-bus"; |
| 210 | #size-cells = <1>; |
| 211 | #address-cells = <1>; |
| 212 | ranges = <0x51000000 0x51000000 0x3000 |
| 213 | 0x0 0x20000000 0x10000000>; |
| 214 | pcie@51000000 { |
| 215 | compatible = "ti,dra7-pcie"; |
| 216 | reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; |
| 217 | reg-names = "rc_dbics", "ti_conf", "config"; |
| 218 | interrupts = <0 232 0x4>, <0 233 0x4>; |
| 219 | #address-cells = <3>; |
| 220 | #size-cells = <2>; |
| 221 | device_type = "pci"; |
| 222 | ranges = <0x81000000 0 0 0x03000 0 0x00010000 |
| 223 | 0x82000000 0 0x20013000 0x13000 0 0xffed000>; |
| 224 | #interrupt-cells = <1>; |
| 225 | num-lanes = <1>; |
| 226 | ti,hwmods = "pcie1"; |
| 227 | phys = <&pcie1_phy>; |
| 228 | phy-names = "pcie-phy0"; |
| 229 | interrupt-map-mask = <0 0 0 7>; |
| 230 | interrupt-map = <0 0 0 1 &pcie1_intc 1>, |
| 231 | <0 0 0 2 &pcie1_intc 2>, |
| 232 | <0 0 0 3 &pcie1_intc 3>, |
| 233 | <0 0 0 4 &pcie1_intc 4>; |
| 234 | pcie1_intc: interrupt-controller { |
| 235 | interrupt-controller; |
| 236 | #address-cells = <0>; |
| 237 | #interrupt-cells = <1>; |
| 238 | }; |
| 239 | }; |
| 240 | }; |
| 241 | |
| 242 | axi@1 { |
| 243 | compatible = "simple-bus"; |
| 244 | #size-cells = <1>; |
| 245 | #address-cells = <1>; |
| 246 | ranges = <0x51800000 0x51800000 0x3000 |
| 247 | 0x0 0x30000000 0x10000000>; |
| 248 | status = "disabled"; |
| 249 | pcie@51000000 { |
| 250 | compatible = "ti,dra7-pcie"; |
| 251 | reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; |
| 252 | reg-names = "rc_dbics", "ti_conf", "config"; |
| 253 | interrupts = <0 355 0x4>, <0 356 0x4>; |
| 254 | #address-cells = <3>; |
| 255 | #size-cells = <2>; |
| 256 | device_type = "pci"; |
| 257 | ranges = <0x81000000 0 0 0x03000 0 0x00010000 |
| 258 | 0x82000000 0 0x30013000 0x13000 0 0xffed000>; |
| 259 | #interrupt-cells = <1>; |
| 260 | num-lanes = <1>; |
| 261 | ti,hwmods = "pcie2"; |
| 262 | phys = <&pcie2_phy>; |
| 263 | phy-names = "pcie-phy0"; |
| 264 | interrupt-map-mask = <0 0 0 7>; |
| 265 | interrupt-map = <0 0 0 1 &pcie2_intc 1>, |
| 266 | <0 0 0 2 &pcie2_intc 2>, |
| 267 | <0 0 0 3 &pcie2_intc 3>, |
| 268 | <0 0 0 4 &pcie2_intc 4>; |
| 269 | pcie2_intc: interrupt-controller { |
| 270 | interrupt-controller; |
| 271 | #address-cells = <0>; |
| 272 | #interrupt-cells = <1>; |
| 273 | }; |
| 274 | }; |
| 275 | }; |
| 276 | |
| 277 | bandgap: bandgap@4a0021e0 { |
| 278 | reg = <0x4a0021e0 0xc |
| 279 | 0x4a00232c 0xc |
| 280 | 0x4a002380 0x2c |
| 281 | 0x4a0023C0 0x3c |
| 282 | 0x4a002564 0x8 |
| 283 | 0x4a002574 0x50>; |
| 284 | compatible = "ti,dra752-bandgap"; |
| 285 | interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 286 | #thermal-sensor-cells = <1>; |
| 287 | }; |
| 288 | |
| 289 | dra7_ctrl_core: ctrl_core@4a002000 { |
| 290 | compatible = "syscon"; |
| 291 | reg = <0x4a002000 0x6d0>; |
| 292 | }; |
| 293 | |
| 294 | dra7_ctrl_general: tisyscon@4a002e00 { |
| 295 | compatible = "syscon"; |
| 296 | reg = <0x4a002e00 0x7c>; |
| 297 | }; |
| 298 | |
| 299 | sdma: dma-controller@4a056000 { |
| 300 | compatible = "ti,omap4430-sdma"; |
| 301 | reg = <0x4a056000 0x1000>; |
| 302 | interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, |
| 303 | <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| 304 | <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 305 | <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 306 | #dma-cells = <1>; |
| 307 | dma-channels = <32>; |
| 308 | dma-requests = <127>; |
| 309 | }; |
| 310 | |
| 311 | gpio1: gpio@4ae10000 { |
| 312 | compatible = "ti,omap4-gpio"; |
| 313 | reg = <0x4ae10000 0x200>; |
| 314 | interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 315 | ti,hwmods = "gpio1"; |
| 316 | gpio-controller; |
| 317 | #gpio-cells = <2>; |
| 318 | interrupt-controller; |
| 319 | #interrupt-cells = <2>; |
| 320 | }; |
| 321 | |
| 322 | gpio2: gpio@48055000 { |
| 323 | compatible = "ti,omap4-gpio"; |
| 324 | reg = <0x48055000 0x200>; |
| 325 | interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 326 | ti,hwmods = "gpio2"; |
| 327 | gpio-controller; |
| 328 | #gpio-cells = <2>; |
| 329 | interrupt-controller; |
| 330 | #interrupt-cells = <2>; |
| 331 | }; |
| 332 | |
| 333 | gpio3: gpio@48057000 { |
| 334 | compatible = "ti,omap4-gpio"; |
| 335 | reg = <0x48057000 0x200>; |
| 336 | interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 337 | ti,hwmods = "gpio3"; |
| 338 | gpio-controller; |
| 339 | #gpio-cells = <2>; |
| 340 | interrupt-controller; |
| 341 | #interrupt-cells = <2>; |
| 342 | }; |
| 343 | |
| 344 | gpio4: gpio@48059000 { |
| 345 | compatible = "ti,omap4-gpio"; |
| 346 | reg = <0x48059000 0x200>; |
| 347 | interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 348 | ti,hwmods = "gpio4"; |
| 349 | gpio-controller; |
| 350 | #gpio-cells = <2>; |
| 351 | interrupt-controller; |
| 352 | #interrupt-cells = <2>; |
| 353 | }; |
| 354 | |
| 355 | gpio5: gpio@4805b000 { |
| 356 | compatible = "ti,omap4-gpio"; |
| 357 | reg = <0x4805b000 0x200>; |
| 358 | interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 359 | ti,hwmods = "gpio5"; |
| 360 | gpio-controller; |
| 361 | #gpio-cells = <2>; |
| 362 | interrupt-controller; |
| 363 | #interrupt-cells = <2>; |
| 364 | }; |
| 365 | |
| 366 | gpio6: gpio@4805d000 { |
| 367 | compatible = "ti,omap4-gpio"; |
| 368 | reg = <0x4805d000 0x200>; |
| 369 | interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| 370 | ti,hwmods = "gpio6"; |
| 371 | gpio-controller; |
| 372 | #gpio-cells = <2>; |
| 373 | interrupt-controller; |
| 374 | #interrupt-cells = <2>; |
| 375 | }; |
| 376 | |
| 377 | gpio7: gpio@48051000 { |
| 378 | compatible = "ti,omap4-gpio"; |
| 379 | reg = <0x48051000 0x200>; |
| 380 | interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| 381 | ti,hwmods = "gpio7"; |
| 382 | gpio-controller; |
| 383 | #gpio-cells = <2>; |
| 384 | interrupt-controller; |
| 385 | #interrupt-cells = <2>; |
| 386 | }; |
| 387 | |
| 388 | gpio8: gpio@48053000 { |
| 389 | compatible = "ti,omap4-gpio"; |
| 390 | reg = <0x48053000 0x200>; |
| 391 | interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| 392 | ti,hwmods = "gpio8"; |
| 393 | gpio-controller; |
| 394 | #gpio-cells = <2>; |
| 395 | interrupt-controller; |
| 396 | #interrupt-cells = <2>; |
| 397 | }; |
| 398 | |
| 399 | uart1: serial@4806a000 { |
| 400 | compatible = "ti,omap4-uart"; |
| 401 | reg = <0x4806a000 0x100>; |
| 402 | interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 403 | ti,hwmods = "uart1"; |
| 404 | clock-frequency = <48000000>; |
| 405 | status = "disabled"; |
| 406 | dmas = <&sdma 49>, <&sdma 50>; |
| 407 | dma-names = "tx", "rx"; |
| 408 | }; |
| 409 | |
| 410 | uart2: serial@4806c000 { |
| 411 | compatible = "ti,omap4-uart"; |
| 412 | reg = <0x4806c000 0x100>; |
| 413 | interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| 414 | ti,hwmods = "uart2"; |
| 415 | clock-frequency = <48000000>; |
| 416 | status = "disabled"; |
| 417 | dmas = <&sdma 51>, <&sdma 52>; |
| 418 | dma-names = "tx", "rx"; |
| 419 | }; |
| 420 | |
| 421 | uart3: serial@48020000 { |
| 422 | compatible = "ti,omap4-uart"; |
| 423 | reg = <0x48020000 0x100>; |
| 424 | interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| 425 | ti,hwmods = "uart3"; |
| 426 | clock-frequency = <48000000>; |
| 427 | status = "disabled"; |
| 428 | dmas = <&sdma 53>, <&sdma 54>; |
| 429 | dma-names = "tx", "rx"; |
| 430 | }; |
| 431 | |
| 432 | uart4: serial@4806e000 { |
| 433 | compatible = "ti,omap4-uart"; |
| 434 | reg = <0x4806e000 0x100>; |
| 435 | interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 436 | ti,hwmods = "uart4"; |
| 437 | clock-frequency = <48000000>; |
| 438 | status = "disabled"; |
| 439 | dmas = <&sdma 55>, <&sdma 56>; |
| 440 | dma-names = "tx", "rx"; |
| 441 | }; |
| 442 | |
| 443 | uart5: serial@48066000 { |
| 444 | compatible = "ti,omap4-uart"; |
| 445 | reg = <0x48066000 0x100>; |
| 446 | interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| 447 | ti,hwmods = "uart5"; |
| 448 | clock-frequency = <48000000>; |
| 449 | status = "disabled"; |
| 450 | dmas = <&sdma 63>, <&sdma 64>; |
| 451 | dma-names = "tx", "rx"; |
| 452 | }; |
| 453 | |
| 454 | uart6: serial@48068000 { |
| 455 | compatible = "ti,omap4-uart"; |
| 456 | reg = <0x48068000 0x100>; |
| 457 | interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| 458 | ti,hwmods = "uart6"; |
| 459 | clock-frequency = <48000000>; |
| 460 | status = "disabled"; |
| 461 | dmas = <&sdma 79>, <&sdma 80>; |
| 462 | dma-names = "tx", "rx"; |
| 463 | }; |
| 464 | |
| 465 | uart7: serial@48420000 { |
| 466 | compatible = "ti,omap4-uart"; |
| 467 | reg = <0x48420000 0x100>; |
| 468 | interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; |
| 469 | ti,hwmods = "uart7"; |
| 470 | clock-frequency = <48000000>; |
| 471 | status = "disabled"; |
| 472 | }; |
| 473 | |
| 474 | uart8: serial@48422000 { |
| 475 | compatible = "ti,omap4-uart"; |
| 476 | reg = <0x48422000 0x100>; |
| 477 | interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; |
| 478 | ti,hwmods = "uart8"; |
| 479 | clock-frequency = <48000000>; |
| 480 | status = "disabled"; |
| 481 | }; |
| 482 | |
| 483 | uart9: serial@48424000 { |
| 484 | compatible = "ti,omap4-uart"; |
| 485 | reg = <0x48424000 0x100>; |
| 486 | interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; |
| 487 | ti,hwmods = "uart9"; |
| 488 | clock-frequency = <48000000>; |
| 489 | status = "disabled"; |
| 490 | }; |
| 491 | |
| 492 | uart10: serial@4ae2b000 { |
| 493 | compatible = "ti,omap4-uart"; |
| 494 | reg = <0x4ae2b000 0x100>; |
| 495 | interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| 496 | ti,hwmods = "uart10"; |
| 497 | clock-frequency = <48000000>; |
| 498 | status = "disabled"; |
| 499 | }; |
| 500 | |
| 501 | mailbox1: mailbox@4a0f4000 { |
| 502 | compatible = "ti,omap4-mailbox"; |
| 503 | reg = <0x4a0f4000 0x200>; |
| 504 | interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, |
| 505 | <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, |
| 506 | <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; |
| 507 | ti,hwmods = "mailbox1"; |
| 508 | #mbox-cells = <1>; |
| 509 | ti,mbox-num-users = <3>; |
| 510 | ti,mbox-num-fifos = <8>; |
| 511 | status = "disabled"; |
| 512 | }; |
| 513 | |
| 514 | mailbox2: mailbox@4883a000 { |
| 515 | compatible = "ti,omap4-mailbox"; |
| 516 | reg = <0x4883a000 0x200>; |
| 517 | interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, |
| 518 | <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, |
| 519 | <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, |
| 520 | <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; |
| 521 | ti,hwmods = "mailbox2"; |
| 522 | #mbox-cells = <1>; |
| 523 | ti,mbox-num-users = <4>; |
| 524 | ti,mbox-num-fifos = <12>; |
| 525 | status = "disabled"; |
| 526 | }; |
| 527 | |
| 528 | mailbox3: mailbox@4883c000 { |
| 529 | compatible = "ti,omap4-mailbox"; |
| 530 | reg = <0x4883c000 0x200>; |
| 531 | interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, |
| 532 | <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, |
| 533 | <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, |
| 534 | <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; |
| 535 | ti,hwmods = "mailbox3"; |
| 536 | #mbox-cells = <1>; |
| 537 | ti,mbox-num-users = <4>; |
| 538 | ti,mbox-num-fifos = <12>; |
| 539 | status = "disabled"; |
| 540 | }; |
| 541 | |
| 542 | mailbox4: mailbox@4883e000 { |
| 543 | compatible = "ti,omap4-mailbox"; |
| 544 | reg = <0x4883e000 0x200>; |
| 545 | interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, |
| 546 | <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, |
| 547 | <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, |
| 548 | <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; |
| 549 | ti,hwmods = "mailbox4"; |
| 550 | #mbox-cells = <1>; |
| 551 | ti,mbox-num-users = <4>; |
| 552 | ti,mbox-num-fifos = <12>; |
| 553 | status = "disabled"; |
| 554 | }; |
| 555 | |
| 556 | mailbox5: mailbox@48840000 { |
| 557 | compatible = "ti,omap4-mailbox"; |
| 558 | reg = <0x48840000 0x200>; |
| 559 | interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, |
| 560 | <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, |
| 561 | <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, |
| 562 | <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; |
| 563 | ti,hwmods = "mailbox5"; |
| 564 | #mbox-cells = <1>; |
| 565 | ti,mbox-num-users = <4>; |
| 566 | ti,mbox-num-fifos = <12>; |
| 567 | status = "disabled"; |
| 568 | }; |
| 569 | |
| 570 | mailbox6: mailbox@48842000 { |
| 571 | compatible = "ti,omap4-mailbox"; |
| 572 | reg = <0x48842000 0x200>; |
| 573 | interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, |
| 574 | <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| 575 | <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, |
| 576 | <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; |
| 577 | ti,hwmods = "mailbox6"; |
| 578 | #mbox-cells = <1>; |
| 579 | ti,mbox-num-users = <4>; |
| 580 | ti,mbox-num-fifos = <12>; |
| 581 | status = "disabled"; |
| 582 | }; |
| 583 | |
| 584 | mailbox7: mailbox@48844000 { |
| 585 | compatible = "ti,omap4-mailbox"; |
| 586 | reg = <0x48844000 0x200>; |
| 587 | interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, |
| 588 | <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, |
| 589 | <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, |
| 590 | <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>; |
| 591 | ti,hwmods = "mailbox7"; |
| 592 | #mbox-cells = <1>; |
| 593 | ti,mbox-num-users = <4>; |
| 594 | ti,mbox-num-fifos = <12>; |
| 595 | status = "disabled"; |
| 596 | }; |
| 597 | |
| 598 | mailbox8: mailbox@48846000 { |
| 599 | compatible = "ti,omap4-mailbox"; |
| 600 | reg = <0x48846000 0x200>; |
| 601 | interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, |
| 602 | <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, |
| 603 | <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, |
| 604 | <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; |
| 605 | ti,hwmods = "mailbox8"; |
| 606 | #mbox-cells = <1>; |
| 607 | ti,mbox-num-users = <4>; |
| 608 | ti,mbox-num-fifos = <12>; |
| 609 | status = "disabled"; |
| 610 | }; |
| 611 | |
| 612 | mailbox9: mailbox@4885e000 { |
| 613 | compatible = "ti,omap4-mailbox"; |
| 614 | reg = <0x4885e000 0x200>; |
| 615 | interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, |
| 616 | <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, |
| 617 | <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, |
| 618 | <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; |
| 619 | ti,hwmods = "mailbox9"; |
| 620 | #mbox-cells = <1>; |
| 621 | ti,mbox-num-users = <4>; |
| 622 | ti,mbox-num-fifos = <12>; |
| 623 | status = "disabled"; |
| 624 | }; |
| 625 | |
| 626 | mailbox10: mailbox@48860000 { |
| 627 | compatible = "ti,omap4-mailbox"; |
| 628 | reg = <0x48860000 0x200>; |
| 629 | interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, |
| 630 | <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, |
| 631 | <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, |
| 632 | <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; |
| 633 | ti,hwmods = "mailbox10"; |
| 634 | #mbox-cells = <1>; |
| 635 | ti,mbox-num-users = <4>; |
| 636 | ti,mbox-num-fifos = <12>; |
| 637 | status = "disabled"; |
| 638 | }; |
| 639 | |
| 640 | mailbox11: mailbox@48862000 { |
| 641 | compatible = "ti,omap4-mailbox"; |
| 642 | reg = <0x48862000 0x200>; |
| 643 | interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, |
| 644 | <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, |
| 645 | <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, |
| 646 | <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>; |
| 647 | ti,hwmods = "mailbox11"; |
| 648 | #mbox-cells = <1>; |
| 649 | ti,mbox-num-users = <4>; |
| 650 | ti,mbox-num-fifos = <12>; |
| 651 | status = "disabled"; |
| 652 | }; |
| 653 | |
| 654 | mailbox12: mailbox@48864000 { |
| 655 | compatible = "ti,omap4-mailbox"; |
| 656 | reg = <0x48864000 0x200>; |
| 657 | interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, |
| 658 | <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, |
| 659 | <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| 660 | <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>; |
| 661 | ti,hwmods = "mailbox12"; |
| 662 | #mbox-cells = <1>; |
| 663 | ti,mbox-num-users = <4>; |
| 664 | ti,mbox-num-fifos = <12>; |
| 665 | status = "disabled"; |
| 666 | }; |
| 667 | |
| 668 | mailbox13: mailbox@48802000 { |
| 669 | compatible = "ti,omap4-mailbox"; |
| 670 | reg = <0x48802000 0x200>; |
| 671 | interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, |
| 672 | <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, |
| 673 | <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, |
| 674 | <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>; |
| 675 | ti,hwmods = "mailbox13"; |
| 676 | #mbox-cells = <1>; |
| 677 | ti,mbox-num-users = <4>; |
| 678 | ti,mbox-num-fifos = <12>; |
| 679 | status = "disabled"; |
| 680 | }; |
| 681 | |
| 682 | timer1: timer@4ae18000 { |
| 683 | compatible = "ti,omap5430-timer"; |
| 684 | reg = <0x4ae18000 0x80>; |
| 685 | interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 686 | ti,hwmods = "timer1"; |
| 687 | ti,timer-alwon; |
| 688 | }; |
| 689 | |
| 690 | timer2: timer@48032000 { |
| 691 | compatible = "ti,omap5430-timer"; |
| 692 | reg = <0x48032000 0x80>; |
| 693 | interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 694 | ti,hwmods = "timer2"; |
| 695 | }; |
| 696 | |
| 697 | timer3: timer@48034000 { |
| 698 | compatible = "ti,omap5430-timer"; |
| 699 | reg = <0x48034000 0x80>; |
| 700 | interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 701 | ti,hwmods = "timer3"; |
| 702 | }; |
| 703 | |
| 704 | timer4: timer@48036000 { |
| 705 | compatible = "ti,omap5430-timer"; |
| 706 | reg = <0x48036000 0x80>; |
| 707 | interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 708 | ti,hwmods = "timer4"; |
| 709 | }; |
| 710 | |
| 711 | timer5: timer@48820000 { |
| 712 | compatible = "ti,omap5430-timer"; |
| 713 | reg = <0x48820000 0x80>; |
| 714 | interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 715 | ti,hwmods = "timer5"; |
| 716 | }; |
| 717 | |
| 718 | timer6: timer@48822000 { |
| 719 | compatible = "ti,omap5430-timer"; |
| 720 | reg = <0x48822000 0x80>; |
| 721 | interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 722 | ti,hwmods = "timer6"; |
| 723 | }; |
| 724 | |
| 725 | timer7: timer@48824000 { |
| 726 | compatible = "ti,omap5430-timer"; |
| 727 | reg = <0x48824000 0x80>; |
| 728 | interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 729 | ti,hwmods = "timer7"; |
| 730 | }; |
| 731 | |
| 732 | timer8: timer@48826000 { |
| 733 | compatible = "ti,omap5430-timer"; |
| 734 | reg = <0x48826000 0x80>; |
| 735 | interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 736 | ti,hwmods = "timer8"; |
| 737 | }; |
| 738 | |
| 739 | timer9: timer@4803e000 { |
| 740 | compatible = "ti,omap5430-timer"; |
| 741 | reg = <0x4803e000 0x80>; |
| 742 | interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 743 | ti,hwmods = "timer9"; |
| 744 | }; |
| 745 | |
| 746 | timer10: timer@48086000 { |
| 747 | compatible = "ti,omap5430-timer"; |
| 748 | reg = <0x48086000 0x80>; |
| 749 | interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 750 | ti,hwmods = "timer10"; |
| 751 | }; |
| 752 | |
| 753 | timer11: timer@48088000 { |
| 754 | compatible = "ti,omap5430-timer"; |
| 755 | reg = <0x48088000 0x80>; |
| 756 | interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 757 | ti,hwmods = "timer11"; |
| 758 | }; |
| 759 | |
| 760 | timer13: timer@48828000 { |
| 761 | compatible = "ti,omap5430-timer"; |
| 762 | reg = <0x48828000 0x80>; |
| 763 | interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; |
| 764 | ti,hwmods = "timer13"; |
| 765 | status = "disabled"; |
| 766 | }; |
| 767 | |
| 768 | timer14: timer@4882a000 { |
| 769 | compatible = "ti,omap5430-timer"; |
| 770 | reg = <0x4882a000 0x80>; |
| 771 | interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; |
| 772 | ti,hwmods = "timer14"; |
| 773 | status = "disabled"; |
| 774 | }; |
| 775 | |
| 776 | timer15: timer@4882c000 { |
| 777 | compatible = "ti,omap5430-timer"; |
| 778 | reg = <0x4882c000 0x80>; |
| 779 | interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; |
| 780 | ti,hwmods = "timer15"; |
| 781 | status = "disabled"; |
| 782 | }; |
| 783 | |
| 784 | timer16: timer@4882e000 { |
| 785 | compatible = "ti,omap5430-timer"; |
| 786 | reg = <0x4882e000 0x80>; |
| 787 | interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; |
| 788 | ti,hwmods = "timer16"; |
| 789 | status = "disabled"; |
| 790 | }; |
| 791 | |
| 792 | wdt2: wdt@4ae14000 { |
| 793 | compatible = "ti,omap3-wdt"; |
| 794 | reg = <0x4ae14000 0x80>; |
| 795 | interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 796 | ti,hwmods = "wd_timer2"; |
| 797 | }; |
| 798 | |
| 799 | hwspinlock: spinlock@4a0f6000 { |
| 800 | compatible = "ti,omap4-hwspinlock"; |
| 801 | reg = <0x4a0f6000 0x1000>; |
| 802 | ti,hwmods = "spinlock"; |
| 803 | #hwlock-cells = <1>; |
| 804 | }; |
| 805 | |
| 806 | dmm@4e000000 { |
| 807 | compatible = "ti,omap5-dmm"; |
| 808 | reg = <0x4e000000 0x800>; |
| 809 | interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| 810 | ti,hwmods = "dmm"; |
| 811 | }; |
| 812 | |
| 813 | i2c1: i2c@48070000 { |
| 814 | compatible = "ti,omap4-i2c"; |
| 815 | reg = <0x48070000 0x100>; |
| 816 | interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| 817 | #address-cells = <1>; |
| 818 | #size-cells = <0>; |
| 819 | ti,hwmods = "i2c1"; |
| 820 | status = "disabled"; |
| 821 | }; |
| 822 | |
| 823 | i2c2: i2c@48072000 { |
| 824 | compatible = "ti,omap4-i2c"; |
| 825 | reg = <0x48072000 0x100>; |
| 826 | interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 827 | #address-cells = <1>; |
| 828 | #size-cells = <0>; |
| 829 | ti,hwmods = "i2c2"; |
| 830 | status = "disabled"; |
| 831 | }; |
| 832 | |
| 833 | i2c3: i2c@48060000 { |
| 834 | compatible = "ti,omap4-i2c"; |
| 835 | reg = <0x48060000 0x100>; |
| 836 | interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; |
| 837 | #address-cells = <1>; |
| 838 | #size-cells = <0>; |
| 839 | ti,hwmods = "i2c3"; |
| 840 | status = "disabled"; |
| 841 | }; |
| 842 | |
| 843 | i2c4: i2c@4807a000 { |
| 844 | compatible = "ti,omap4-i2c"; |
| 845 | reg = <0x4807a000 0x100>; |
| 846 | interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| 847 | #address-cells = <1>; |
| 848 | #size-cells = <0>; |
| 849 | ti,hwmods = "i2c4"; |
| 850 | status = "disabled"; |
| 851 | }; |
| 852 | |
| 853 | i2c5: i2c@4807c000 { |
| 854 | compatible = "ti,omap4-i2c"; |
| 855 | reg = <0x4807c000 0x100>; |
| 856 | interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| 857 | #address-cells = <1>; |
| 858 | #size-cells = <0>; |
| 859 | ti,hwmods = "i2c5"; |
| 860 | status = "disabled"; |
| 861 | }; |
| 862 | |
| 863 | mmc1: mmc@4809c000 { |
| 864 | compatible = "ti,omap4-hsmmc"; |
| 865 | reg = <0x4809c000 0x400>; |
| 866 | interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 867 | ti,hwmods = "mmc1"; |
| 868 | ti,dual-volt; |
| 869 | ti,needs-special-reset; |
| 870 | dmas = <&sdma 61>, <&sdma 62>; |
| 871 | dma-names = "tx", "rx"; |
| 872 | status = "disabled"; |
| 873 | pbias-supply = <&pbias_mmc_reg>; |
| 874 | }; |
| 875 | |
| 876 | mmc2: mmc@480b4000 { |
| 877 | compatible = "ti,omap4-hsmmc"; |
| 878 | reg = <0x480b4000 0x400>; |
| 879 | interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| 880 | ti,hwmods = "mmc2"; |
| 881 | ti,needs-special-reset; |
| 882 | dmas = <&sdma 47>, <&sdma 48>; |
| 883 | dma-names = "tx", "rx"; |
| 884 | status = "disabled"; |
| 885 | }; |
| 886 | |
| 887 | mmc3: mmc@480ad000 { |
| 888 | compatible = "ti,omap4-hsmmc"; |
| 889 | reg = <0x480ad000 0x400>; |
| 890 | interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| 891 | ti,hwmods = "mmc3"; |
| 892 | ti,needs-special-reset; |
| 893 | dmas = <&sdma 77>, <&sdma 78>; |
| 894 | dma-names = "tx", "rx"; |
| 895 | status = "disabled"; |
| 896 | }; |
| 897 | |
| 898 | mmc4: mmc@480d1000 { |
| 899 | compatible = "ti,omap4-hsmmc"; |
| 900 | reg = <0x480d1000 0x400>; |
| 901 | interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| 902 | ti,hwmods = "mmc4"; |
| 903 | ti,needs-special-reset; |
| 904 | dmas = <&sdma 57>, <&sdma 58>; |
| 905 | dma-names = "tx", "rx"; |
| 906 | status = "disabled"; |
| 907 | }; |
| 908 | |
| 909 | abb_mpu: regulator-abb-mpu { |
| 910 | compatible = "ti,abb-v3"; |
| 911 | regulator-name = "abb_mpu"; |
| 912 | #address-cells = <0>; |
| 913 | #size-cells = <0>; |
| 914 | clocks = <&sys_clkin1>; |
| 915 | ti,settling-time = <50>; |
| 916 | ti,clock-cycles = <16>; |
| 917 | |
| 918 | reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>, |
| 919 | <0x4ae06014 0x4>, <0x4a003b20 0xc>, |
| 920 | <0x4ae0c158 0x4>; |
| 921 | reg-names = "setup-address", "control-address", |
| 922 | "int-address", "efuse-address", |
| 923 | "ldo-address"; |
| 924 | ti,tranxdone-status-mask = <0x80>; |
| 925 | /* LDOVBBMPU_FBB_MUX_CTRL */ |
| 926 | ti,ldovbb-override-mask = <0x400>; |
| 927 | /* LDOVBBMPU_FBB_VSET_OUT */ |
| 928 | ti,ldovbb-vset-mask = <0x1F>; |
| 929 | |
| 930 | /* |
| 931 | * NOTE: only FBB mode used but actual vset will |
| 932 | * determine final biasing |
| 933 | */ |
| 934 | ti,abb_info = < |
| 935 | /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 936 | 1060000 0 0x0 0 0x02000000 0x01F00000 |
| 937 | 1160000 0 0x4 0 0x02000000 0x01F00000 |
| 938 | 1210000 0 0x8 0 0x02000000 0x01F00000 |
| 939 | >; |
| 940 | }; |
| 941 | |
| 942 | abb_ivahd: regulator-abb-ivahd { |
| 943 | compatible = "ti,abb-v3"; |
| 944 | regulator-name = "abb_ivahd"; |
| 945 | #address-cells = <0>; |
| 946 | #size-cells = <0>; |
| 947 | clocks = <&sys_clkin1>; |
| 948 | ti,settling-time = <50>; |
| 949 | ti,clock-cycles = <16>; |
| 950 | |
| 951 | reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>, |
| 952 | <0x4ae06010 0x4>, <0x4a0025cc 0xc>, |
| 953 | <0x4a002470 0x4>; |
| 954 | reg-names = "setup-address", "control-address", |
| 955 | "int-address", "efuse-address", |
| 956 | "ldo-address"; |
| 957 | ti,tranxdone-status-mask = <0x40000000>; |
| 958 | /* LDOVBBIVA_FBB_MUX_CTRL */ |
| 959 | ti,ldovbb-override-mask = <0x400>; |
| 960 | /* LDOVBBIVA_FBB_VSET_OUT */ |
| 961 | ti,ldovbb-vset-mask = <0x1F>; |
| 962 | |
| 963 | /* |
| 964 | * NOTE: only FBB mode used but actual vset will |
| 965 | * determine final biasing |
| 966 | */ |
| 967 | ti,abb_info = < |
| 968 | /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 969 | 1055000 0 0x0 0 0x02000000 0x01F00000 |
| 970 | 1150000 0 0x4 0 0x02000000 0x01F00000 |
| 971 | 1250000 0 0x8 0 0x02000000 0x01F00000 |
| 972 | >; |
| 973 | }; |
| 974 | |
| 975 | abb_dspeve: regulator-abb-dspeve { |
| 976 | compatible = "ti,abb-v3"; |
| 977 | regulator-name = "abb_dspeve"; |
| 978 | #address-cells = <0>; |
| 979 | #size-cells = <0>; |
| 980 | clocks = <&sys_clkin1>; |
| 981 | ti,settling-time = <50>; |
| 982 | ti,clock-cycles = <16>; |
| 983 | |
| 984 | reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>, |
| 985 | <0x4ae06010 0x4>, <0x4a0025e0 0xc>, |
| 986 | <0x4a00246c 0x4>; |
| 987 | reg-names = "setup-address", "control-address", |
| 988 | "int-address", "efuse-address", |
| 989 | "ldo-address"; |
| 990 | ti,tranxdone-status-mask = <0x20000000>; |
| 991 | /* LDOVBBDSPEVE_FBB_MUX_CTRL */ |
| 992 | ti,ldovbb-override-mask = <0x400>; |
| 993 | /* LDOVBBDSPEVE_FBB_VSET_OUT */ |
| 994 | ti,ldovbb-vset-mask = <0x1F>; |
| 995 | |
| 996 | /* |
| 997 | * NOTE: only FBB mode used but actual vset will |
| 998 | * determine final biasing |
| 999 | */ |
| 1000 | ti,abb_info = < |
| 1001 | /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 1002 | 1055000 0 0x0 0 0x02000000 0x01F00000 |
| 1003 | 1150000 0 0x4 0 0x02000000 0x01F00000 |
| 1004 | 1250000 0 0x8 0 0x02000000 0x01F00000 |
| 1005 | >; |
| 1006 | }; |
| 1007 | |
| 1008 | abb_gpu: regulator-abb-gpu { |
| 1009 | compatible = "ti,abb-v3"; |
| 1010 | regulator-name = "abb_gpu"; |
| 1011 | #address-cells = <0>; |
| 1012 | #size-cells = <0>; |
| 1013 | clocks = <&sys_clkin1>; |
| 1014 | ti,settling-time = <50>; |
| 1015 | ti,clock-cycles = <16>; |
| 1016 | |
| 1017 | reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>, |
| 1018 | <0x4ae06010 0x4>, <0x4a003b08 0xc>, |
| 1019 | <0x4ae0c154 0x4>; |
| 1020 | reg-names = "setup-address", "control-address", |
| 1021 | "int-address", "efuse-address", |
| 1022 | "ldo-address"; |
| 1023 | ti,tranxdone-status-mask = <0x10000000>; |
| 1024 | /* LDOVBBGPU_FBB_MUX_CTRL */ |
| 1025 | ti,ldovbb-override-mask = <0x400>; |
| 1026 | /* LDOVBBGPU_FBB_VSET_OUT */ |
| 1027 | ti,ldovbb-vset-mask = <0x1F>; |
| 1028 | |
| 1029 | /* |
| 1030 | * NOTE: only FBB mode used but actual vset will |
| 1031 | * determine final biasing |
| 1032 | */ |
| 1033 | ti,abb_info = < |
| 1034 | /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 1035 | 1090000 0 0x0 0 0x02000000 0x01F00000 |
| 1036 | 1210000 0 0x4 0 0x02000000 0x01F00000 |
| 1037 | 1280000 0 0x8 0 0x02000000 0x01F00000 |
| 1038 | >; |
| 1039 | }; |
| 1040 | |
| 1041 | mcspi1: spi@48098000 { |
| 1042 | compatible = "ti,omap4-mcspi"; |
| 1043 | reg = <0x48098000 0x200>; |
| 1044 | interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| 1045 | #address-cells = <1>; |
| 1046 | #size-cells = <0>; |
| 1047 | ti,hwmods = "mcspi1"; |
| 1048 | ti,spi-num-cs = <4>; |
| 1049 | dmas = <&sdma 35>, |
| 1050 | <&sdma 36>, |
| 1051 | <&sdma 37>, |
| 1052 | <&sdma 38>, |
| 1053 | <&sdma 39>, |
| 1054 | <&sdma 40>, |
| 1055 | <&sdma 41>, |
| 1056 | <&sdma 42>; |
| 1057 | dma-names = "tx0", "rx0", "tx1", "rx1", |
| 1058 | "tx2", "rx2", "tx3", "rx3"; |
| 1059 | status = "disabled"; |
| 1060 | }; |
| 1061 | |
| 1062 | mcspi2: spi@4809a000 { |
| 1063 | compatible = "ti,omap4-mcspi"; |
| 1064 | reg = <0x4809a000 0x200>; |
| 1065 | interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 1066 | #address-cells = <1>; |
| 1067 | #size-cells = <0>; |
| 1068 | ti,hwmods = "mcspi2"; |
| 1069 | ti,spi-num-cs = <2>; |
| 1070 | dmas = <&sdma 43>, |
| 1071 | <&sdma 44>, |
| 1072 | <&sdma 45>, |
| 1073 | <&sdma 46>; |
| 1074 | dma-names = "tx0", "rx0", "tx1", "rx1"; |
| 1075 | status = "disabled"; |
| 1076 | }; |
| 1077 | |
| 1078 | mcspi3: spi@480b8000 { |
| 1079 | compatible = "ti,omap4-mcspi"; |
| 1080 | reg = <0x480b8000 0x200>; |
| 1081 | interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 1082 | #address-cells = <1>; |
| 1083 | #size-cells = <0>; |
| 1084 | ti,hwmods = "mcspi3"; |
| 1085 | ti,spi-num-cs = <2>; |
| 1086 | dmas = <&sdma 15>, <&sdma 16>; |
| 1087 | dma-names = "tx0", "rx0"; |
| 1088 | status = "disabled"; |
| 1089 | }; |
| 1090 | |
| 1091 | mcspi4: spi@480ba000 { |
| 1092 | compatible = "ti,omap4-mcspi"; |
| 1093 | reg = <0x480ba000 0x200>; |
| 1094 | interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 1095 | #address-cells = <1>; |
| 1096 | #size-cells = <0>; |
| 1097 | ti,hwmods = "mcspi4"; |
| 1098 | ti,spi-num-cs = <1>; |
| 1099 | dmas = <&sdma 70>, <&sdma 71>; |
| 1100 | dma-names = "tx0", "rx0"; |
| 1101 | status = "disabled"; |
| 1102 | }; |
| 1103 | |
| 1104 | qspi: qspi@4b300000 { |
| 1105 | compatible = "ti,dra7xxx-qspi"; |
| 1106 | reg = <0x4b300000 0x100>; |
| 1107 | reg-names = "qspi_base"; |
| 1108 | #address-cells = <1>; |
| 1109 | #size-cells = <0>; |
| 1110 | ti,hwmods = "qspi"; |
| 1111 | clocks = <&qspi_gfclk_div>; |
| 1112 | clock-names = "fck"; |
| 1113 | num-cs = <4>; |
| 1114 | interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; |
| 1115 | status = "disabled"; |
| 1116 | }; |
| 1117 | |
| 1118 | omap_control_sata: control-phy@4a002374 { |
| 1119 | compatible = "ti,control-phy-pipe3"; |
| 1120 | reg = <0x4a002374 0x4>; |
| 1121 | reg-names = "power"; |
| 1122 | clocks = <&sys_clkin1>; |
| 1123 | clock-names = "sysclk"; |
| 1124 | }; |
| 1125 | |
| 1126 | /* OCP2SCP3 */ |
| 1127 | ocp2scp@4a090000 { |
| 1128 | compatible = "ti,omap-ocp2scp"; |
| 1129 | #address-cells = <1>; |
| 1130 | #size-cells = <1>; |
| 1131 | ranges; |
| 1132 | reg = <0x4a090000 0x20>; |
| 1133 | ti,hwmods = "ocp2scp3"; |
| 1134 | sata_phy: phy@4A096000 { |
| 1135 | compatible = "ti,phy-pipe3-sata"; |
| 1136 | reg = <0x4A096000 0x80>, /* phy_rx */ |
| 1137 | <0x4A096400 0x64>, /* phy_tx */ |
| 1138 | <0x4A096800 0x40>; /* pll_ctrl */ |
| 1139 | reg-names = "phy_rx", "phy_tx", "pll_ctrl"; |
| 1140 | ctrl-module = <&omap_control_sata>; |
| 1141 | clocks = <&sys_clkin1>, <&sata_ref_clk>; |
| 1142 | clock-names = "sysclk", "refclk"; |
| 1143 | #phy-cells = <0>; |
| 1144 | }; |
| 1145 | |
| 1146 | pcie1_phy: pciephy@4a094000 { |
| 1147 | compatible = "ti,phy-pipe3-pcie"; |
| 1148 | reg = <0x4a094000 0x80>, /* phy_rx */ |
| 1149 | <0x4a094400 0x64>; /* phy_tx */ |
| 1150 | reg-names = "phy_rx", "phy_tx"; |
| 1151 | ctrl-module = <&omap_control_pcie1phy>; |
| 1152 | clocks = <&dpll_pcie_ref_ck>, |
| 1153 | <&dpll_pcie_ref_m2ldo_ck>, |
| 1154 | <&optfclk_pciephy1_32khz>, |
| 1155 | <&optfclk_pciephy1_clk>, |
| 1156 | <&optfclk_pciephy1_div_clk>, |
| 1157 | <&optfclk_pciephy_div>; |
| 1158 | clock-names = "dpll_ref", "dpll_ref_m2", |
| 1159 | "wkupclk", "refclk", |
| 1160 | "div-clk", "phy-div"; |
| 1161 | #phy-cells = <0>; |
| 1162 | }; |
| 1163 | |
| 1164 | pcie2_phy: pciephy@4a095000 { |
| 1165 | compatible = "ti,phy-pipe3-pcie"; |
| 1166 | reg = <0x4a095000 0x80>, /* phy_rx */ |
| 1167 | <0x4a095400 0x64>; /* phy_tx */ |
| 1168 | reg-names = "phy_rx", "phy_tx"; |
| 1169 | ctrl-module = <&omap_control_pcie2phy>; |
| 1170 | clocks = <&dpll_pcie_ref_ck>, |
| 1171 | <&dpll_pcie_ref_m2ldo_ck>, |
| 1172 | <&optfclk_pciephy2_32khz>, |
| 1173 | <&optfclk_pciephy2_clk>, |
| 1174 | <&optfclk_pciephy2_div_clk>, |
| 1175 | <&optfclk_pciephy_div>; |
| 1176 | clock-names = "dpll_ref", "dpll_ref_m2", |
| 1177 | "wkupclk", "refclk", |
| 1178 | "div-clk", "phy-div"; |
| 1179 | #phy-cells = <0>; |
| 1180 | status = "disabled"; |
| 1181 | }; |
| 1182 | }; |
| 1183 | |
| 1184 | sata: sata@4a141100 { |
| 1185 | compatible = "snps,dwc-ahci"; |
| 1186 | reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; |
| 1187 | interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| 1188 | phys = <&sata_phy>; |
| 1189 | phy-names = "sata-phy"; |
| 1190 | clocks = <&sata_ref_clk>; |
| 1191 | ti,hwmods = "sata"; |
| 1192 | }; |
| 1193 | |
| 1194 | omap_control_pcie1phy: control-phy@0x4a003c40 { |
| 1195 | compatible = "ti,control-phy-pcie"; |
| 1196 | reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; |
| 1197 | reg-names = "power", "control_sma", "pcie_pcs"; |
| 1198 | clocks = <&sys_clkin1>; |
| 1199 | clock-names = "sysclk"; |
| 1200 | }; |
| 1201 | |
| 1202 | omap_control_pcie2phy: control-pcie@0x4a003c44 { |
| 1203 | compatible = "ti,control-phy-pcie"; |
| 1204 | reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; |
| 1205 | reg-names = "power", "control_sma", "pcie_pcs"; |
| 1206 | clocks = <&sys_clkin1>; |
| 1207 | clock-names = "sysclk"; |
| 1208 | status = "disabled"; |
| 1209 | }; |
| 1210 | |
| 1211 | rtc: rtc@48838000 { |
| 1212 | compatible = "ti,am3352-rtc"; |
| 1213 | reg = <0x48838000 0x100>; |
| 1214 | interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, |
| 1215 | <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>; |
| 1216 | ti,hwmods = "rtcss"; |
| 1217 | clocks = <&sys_32k_ck>; |
| 1218 | }; |
| 1219 | |
| 1220 | omap_control_usb2phy1: control-phy@4a002300 { |
| 1221 | compatible = "ti,control-phy-usb2"; |
| 1222 | reg = <0x4a002300 0x4>; |
| 1223 | reg-names = "power"; |
| 1224 | }; |
| 1225 | |
| 1226 | omap_control_usb3phy1: control-phy@4a002370 { |
| 1227 | compatible = "ti,control-phy-pipe3"; |
| 1228 | reg = <0x4a002370 0x4>; |
| 1229 | reg-names = "power"; |
| 1230 | }; |
| 1231 | |
| 1232 | omap_control_usb2phy2: control-phy@0x4a002e74 { |
| 1233 | compatible = "ti,control-phy-usb2-dra7"; |
| 1234 | reg = <0x4a002e74 0x4>; |
| 1235 | reg-names = "power"; |
| 1236 | }; |
| 1237 | |
| 1238 | /* OCP2SCP1 */ |
| 1239 | ocp2scp@4a080000 { |
| 1240 | compatible = "ti,omap-ocp2scp"; |
| 1241 | #address-cells = <1>; |
| 1242 | #size-cells = <1>; |
| 1243 | ranges; |
| 1244 | reg = <0x4a080000 0x20>; |
| 1245 | ti,hwmods = "ocp2scp1"; |
| 1246 | |
| 1247 | usb2_phy1: phy@4a084000 { |
| 1248 | compatible = "ti,omap-usb2"; |
| 1249 | reg = <0x4a084000 0x400>; |
| 1250 | ctrl-module = <&omap_control_usb2phy1>; |
| 1251 | clocks = <&usb_phy1_always_on_clk32k>, |
| 1252 | <&usb_otg_ss1_refclk960m>; |
| 1253 | clock-names = "wkupclk", |
| 1254 | "refclk"; |
| 1255 | #phy-cells = <0>; |
| 1256 | }; |
| 1257 | |
| 1258 | usb2_phy2: phy@4a085000 { |
| 1259 | compatible = "ti,omap-usb2"; |
| 1260 | reg = <0x4a085000 0x400>; |
| 1261 | ctrl-module = <&omap_control_usb2phy2>; |
| 1262 | clocks = <&usb_phy2_always_on_clk32k>, |
| 1263 | <&usb_otg_ss2_refclk960m>; |
| 1264 | clock-names = "wkupclk", |
| 1265 | "refclk"; |
| 1266 | #phy-cells = <0>; |
| 1267 | }; |
| 1268 | |
| 1269 | usb3_phy1: phy@4a084400 { |
| 1270 | compatible = "ti,omap-usb3"; |
| 1271 | reg = <0x4a084400 0x80>, |
| 1272 | <0x4a084800 0x64>, |
| 1273 | <0x4a084c00 0x40>; |
| 1274 | reg-names = "phy_rx", "phy_tx", "pll_ctrl"; |
| 1275 | ctrl-module = <&omap_control_usb3phy1>; |
| 1276 | clocks = <&usb_phy3_always_on_clk32k>, |
| 1277 | <&sys_clkin1>, |
| 1278 | <&usb_otg_ss1_refclk960m>; |
| 1279 | clock-names = "wkupclk", |
| 1280 | "sysclk", |
| 1281 | "refclk"; |
| 1282 | #phy-cells = <0>; |
| 1283 | }; |
| 1284 | }; |
| 1285 | |
| 1286 | omap_dwc3_1: omap_dwc3_1@48880000 { |
| 1287 | compatible = "ti,dwc3"; |
| 1288 | ti,hwmods = "usb_otg_ss1"; |
| 1289 | reg = <0x48880000 0x10000>; |
| 1290 | interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 1291 | #address-cells = <1>; |
| 1292 | #size-cells = <1>; |
| 1293 | utmi-mode = <2>; |
| 1294 | ranges; |
| 1295 | usb1: usb@48890000 { |
| 1296 | compatible = "snps,dwc3"; |
| 1297 | reg = <0x48890000 0x17000>; |
| 1298 | interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 1299 | phys = <&usb2_phy1>, <&usb3_phy1>; |
| 1300 | phy-names = "usb2-phy", "usb3-phy"; |
| 1301 | tx-fifo-resize; |
| 1302 | maximum-speed = "super-speed"; |
| 1303 | dr_mode = "otg"; |
| 1304 | snps,dis_u3_susphy_quirk; |
| 1305 | snps,dis_u2_susphy_quirk; |
| 1306 | }; |
| 1307 | }; |
| 1308 | |
| 1309 | omap_dwc3_2: omap_dwc3_2@488c0000 { |
| 1310 | compatible = "ti,dwc3"; |
| 1311 | ti,hwmods = "usb_otg_ss2"; |
| 1312 | reg = <0x488c0000 0x10000>; |
| 1313 | interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 1314 | #address-cells = <1>; |
| 1315 | #size-cells = <1>; |
| 1316 | utmi-mode = <2>; |
| 1317 | ranges; |
| 1318 | usb2: usb@488d0000 { |
| 1319 | compatible = "snps,dwc3"; |
| 1320 | reg = <0x488d0000 0x17000>; |
| 1321 | interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| 1322 | phys = <&usb2_phy2>; |
| 1323 | phy-names = "usb2-phy"; |
| 1324 | tx-fifo-resize; |
| 1325 | maximum-speed = "high-speed"; |
| 1326 | dr_mode = "otg"; |
| 1327 | snps,dis_u3_susphy_quirk; |
| 1328 | snps,dis_u2_susphy_quirk; |
| 1329 | }; |
| 1330 | }; |
| 1331 | |
| 1332 | /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ |
| 1333 | omap_dwc3_3: omap_dwc3_3@48900000 { |
| 1334 | compatible = "ti,dwc3"; |
| 1335 | ti,hwmods = "usb_otg_ss3"; |
| 1336 | reg = <0x48900000 0x10000>; |
| 1337 | interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; |
| 1338 | #address-cells = <1>; |
| 1339 | #size-cells = <1>; |
| 1340 | utmi-mode = <2>; |
| 1341 | ranges; |
| 1342 | status = "disabled"; |
| 1343 | usb3: usb@48910000 { |
| 1344 | compatible = "snps,dwc3"; |
| 1345 | reg = <0x48910000 0x17000>; |
| 1346 | interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 1347 | tx-fifo-resize; |
| 1348 | maximum-speed = "high-speed"; |
| 1349 | dr_mode = "otg"; |
| 1350 | snps,dis_u3_susphy_quirk; |
| 1351 | snps,dis_u2_susphy_quirk; |
| 1352 | }; |
| 1353 | }; |
| 1354 | |
| 1355 | elm: elm@48078000 { |
| 1356 | compatible = "ti,am3352-elm"; |
| 1357 | reg = <0x48078000 0xfc0>; /* device IO registers */ |
| 1358 | interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 1359 | ti,hwmods = "elm"; |
| 1360 | status = "disabled"; |
| 1361 | }; |
| 1362 | |
| 1363 | gpmc: gpmc@50000000 { |
| 1364 | compatible = "ti,am3352-gpmc"; |
| 1365 | ti,hwmods = "gpmc"; |
| 1366 | reg = <0x50000000 0x37c>; /* device IO registers */ |
| 1367 | interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 1368 | gpmc,num-cs = <8>; |
| 1369 | gpmc,num-waitpins = <2>; |
| 1370 | #address-cells = <2>; |
| 1371 | #size-cells = <1>; |
| 1372 | status = "disabled"; |
| 1373 | }; |
| 1374 | |
| 1375 | atl: atl@4843c000 { |
| 1376 | compatible = "ti,dra7-atl"; |
| 1377 | reg = <0x4843c000 0x3ff>; |
| 1378 | ti,hwmods = "atl"; |
| 1379 | ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>, |
| 1380 | <&atl_clkin2_ck>, <&atl_clkin3_ck>; |
| 1381 | clocks = <&atl_gfclk_mux>; |
| 1382 | clock-names = "fck"; |
| 1383 | status = "disabled"; |
| 1384 | }; |
| 1385 | |
| 1386 | crossbar_mpu: crossbar@4a002a48 { |
| 1387 | compatible = "ti,irq-crossbar"; |
| 1388 | reg = <0x4a002a48 0x130>; |
| 1389 | interrupt-controller; |
| 1390 | interrupt-parent = <&wakeupgen>; |
| 1391 | #interrupt-cells = <3>; |
| 1392 | ti,max-irqs = <160>; |
| 1393 | ti,max-crossbar-sources = <MAX_SOURCES>; |
| 1394 | ti,reg-size = <2>; |
| 1395 | ti,irqs-reserved = <0 1 2 3 5 6 131 132>; |
| 1396 | ti,irqs-skip = <10 133 139 140>; |
| 1397 | ti,irqs-safe-map = <0>; |
| 1398 | }; |
| 1399 | |
| 1400 | mac: ethernet@4a100000 { |
| 1401 | compatible = "ti,cpsw"; |
| 1402 | ti,hwmods = "gmac"; |
| 1403 | clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>; |
| 1404 | clock-names = "fck", "cpts"; |
| 1405 | cpdma_channels = <8>; |
| 1406 | ale_entries = <1024>; |
| 1407 | bd_ram_size = <0x2000>; |
| 1408 | no_bd_ram = <0>; |
| 1409 | rx_descs = <64>; |
| 1410 | mac_control = <0x20>; |
| 1411 | slaves = <2>; |
| 1412 | active_slave = <0>; |
| 1413 | cpts_clock_mult = <0x80000000>; |
| 1414 | cpts_clock_shift = <29>; |
| 1415 | reg = <0x48484000 0x1000 |
| 1416 | 0x48485200 0x2E00>; |
| 1417 | #address-cells = <1>; |
| 1418 | #size-cells = <1>; |
| 1419 | /* |
| 1420 | * rx_thresh_pend |
| 1421 | * rx_pend |
| 1422 | * tx_pend |
| 1423 | * misc_pend |
| 1424 | */ |
| 1425 | interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, |
| 1426 | <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| 1427 | <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| 1428 | <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; |
| 1429 | ranges; |
| 1430 | status = "disabled"; |
| 1431 | |
| 1432 | davinci_mdio: mdio@48485000 { |
| 1433 | compatible = "ti,davinci_mdio"; |
| 1434 | #address-cells = <1>; |
| 1435 | #size-cells = <0>; |
| 1436 | ti,hwmods = "davinci_mdio"; |
| 1437 | bus_freq = <1000000>; |
| 1438 | reg = <0x48485000 0x100>; |
| 1439 | }; |
| 1440 | |
| 1441 | cpsw_emac0: slave@48480200 { |
| 1442 | /* Filled in by U-Boot */ |
| 1443 | mac-address = [ 00 00 00 00 00 00 ]; |
| 1444 | }; |
| 1445 | |
| 1446 | cpsw_emac1: slave@48480300 { |
| 1447 | /* Filled in by U-Boot */ |
| 1448 | mac-address = [ 00 00 00 00 00 00 ]; |
| 1449 | }; |
| 1450 | |
| 1451 | phy_sel: cpsw-phy-sel@4a002554 { |
| 1452 | compatible = "ti,dra7xx-cpsw-phy-sel"; |
| 1453 | reg= <0x4a002554 0x4>; |
| 1454 | reg-names = "gmii-sel"; |
| 1455 | }; |
| 1456 | }; |
| 1457 | |
| 1458 | dcan1: can@481cc000 { |
| 1459 | compatible = "ti,dra7-d_can"; |
| 1460 | ti,hwmods = "dcan1"; |
| 1461 | reg = <0x4ae3c000 0x2000>; |
| 1462 | syscon-raminit = <&scm_conf 0x558 0>; |
| 1463 | interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; |
| 1464 | clocks = <&dcan1_sys_clk_mux>; |
| 1465 | status = "disabled"; |
| 1466 | }; |
| 1467 | |
| 1468 | dcan2: can@481d0000 { |
| 1469 | compatible = "ti,dra7-d_can"; |
| 1470 | ti,hwmods = "dcan2"; |
| 1471 | reg = <0x48480000 0x2000>; |
| 1472 | syscon-raminit = <&scm_conf 0x558 1>; |
| 1473 | interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; |
| 1474 | clocks = <&sys_clkin1>; |
| 1475 | status = "disabled"; |
| 1476 | }; |
| 1477 | |
| 1478 | dss: dss@58000000 { |
| 1479 | compatible = "ti,dra7-dss"; |
| 1480 | /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ |
| 1481 | /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ |
| 1482 | status = "disabled"; |
| 1483 | ti,hwmods = "dss_core"; |
| 1484 | /* CTRL_CORE_DSS_PLL_CONTROL */ |
| 1485 | syscon-pll-ctrl = <&scm_conf 0x538>; |
| 1486 | #address-cells = <1>; |
| 1487 | #size-cells = <1>; |
| 1488 | ranges; |
| 1489 | |
| 1490 | dispc@58001000 { |
| 1491 | compatible = "ti,dra7-dispc"; |
| 1492 | reg = <0x58001000 0x1000>; |
| 1493 | interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 1494 | ti,hwmods = "dss_dispc"; |
| 1495 | clocks = <&dss_dss_clk>; |
| 1496 | clock-names = "fck"; |
| 1497 | /* CTRL_CORE_SMA_SW_1 */ |
| 1498 | syscon-pol = <&scm_conf 0x534>; |
| 1499 | }; |
| 1500 | |
| 1501 | hdmi: encoder@58060000 { |
| 1502 | compatible = "ti,dra7-hdmi"; |
| 1503 | reg = <0x58040000 0x200>, |
| 1504 | <0x58040200 0x80>, |
| 1505 | <0x58040300 0x80>, |
| 1506 | <0x58060000 0x19000>; |
| 1507 | reg-names = "wp", "pll", "phy", "core"; |
| 1508 | interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 1509 | status = "disabled"; |
| 1510 | ti,hwmods = "dss_hdmi"; |
| 1511 | clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>; |
| 1512 | clock-names = "fck", "sys_clk"; |
| 1513 | }; |
| 1514 | }; |
| 1515 | }; |
| 1516 | |
| 1517 | thermal_zones: thermal-zones { |
| 1518 | #include "omap4-cpu-thermal.dtsi" |
| 1519 | #include "omap5-gpu-thermal.dtsi" |
| 1520 | #include "omap5-core-thermal.dtsi" |
| 1521 | }; |
| 1522 | |
| 1523 | }; |
| 1524 | |
| 1525 | &cpu_thermal { |
| 1526 | polling-delay = <500>; /* milliseconds */ |
| 1527 | }; |
| 1528 | |
| 1529 | /include/ "dra7xx-clocks.dtsi" |