Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 5cf850c1627dd485389104dbe33e17df37a04b03 / . / arch / arm / dts / imx6qdl-gw5903.dtsi
blob: 1fdb7ba630f1be20b4025d0ce802f52dd9274447 [file] [log] [blame]
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]1/*
2 * Copyright 2017 Gateworks Corporation
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/input/linux-event-codes.h>
50#include <dt-bindings/interrupt-controller/irq.h>
51
52/ {
53 chosen {
54 stdout-path = &uart2;
55 };
56
57 backlight {
58 compatible = "pwm-backlight";
59 pwms = <&pwm1 0 5000000>;
60 brightness-levels = <
61 0 1 2 3 4 5 6 7 8 9
62 10 11 12 13 14 15 16 17 18 19
63 20 21 22 23 24 25 26 27 28 29
64 30 31 32 33 34 35 36 37 38 39
65 40 41 42 43 44 45 46 47 48 49
66 50 51 52 53 54 55 56 57 58 59
67 60 61 62 63 64 65 66 67 68 69
68 70 71 72 73 74 75 76 77 78 79
69 80 81 82 83 84 85 86 87 88 89
70 90 91 92 93 94 95 96 97 98 99
71 100
72 >;
73 default-brightness-level = <100>;
74 };
75
76 gpio-keys {
77 compatible = "gpio-keys";
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]78
79 user-pb {
80 label = "user_pb";
81 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
82 linux,code = <BTN_0>;
83 };
84
85 user-pb1x {
86 label = "user_pb1x";
87 linux,code = <BTN_1>;
88 interrupt-parent = <&gsc>;
89 interrupts = <0>;
90 };
91
92 key-erased {
93 label = "key-erased";
94 linux,code = <BTN_2>;
95 interrupt-parent = <&gsc>;
96 interrupts = <1>;
97 };
98
99 eeprom-wp {
100 label = "eeprom_wp";
101 linux,code = <BTN_3>;
102 interrupt-parent = <&gsc>;
103 interrupts = <2>;
104 };
105
106 tamper {
107 label = "tamper";
108 linux,code = <BTN_4>;
109 interrupt-parent = <&gsc>;
110 interrupts = <5>;
111 };
112
113 switch-hold {
114 label = "switch_hold";
115 linux,code = <BTN_5>;
116 interrupt-parent = <&gsc>;
117 interrupts = <7>;
118 };
119 };
120
121 leds {
122 compatible = "gpio-leds";
123 pinctrl-names = "default";
124 pinctrl-0 = <&pinctrl_gpio_leds>;
125
126 led0: user1 {
127 label = "user1";
128 gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
129 default-state = "off";
130 };
131 };
132
133 memory@10000000 {
134 device_type = "memory";
135 reg = <0x10000000 0x40000000>;
136 };
137
138 reg_5p0v: regulator-5p0v {
139 compatible = "regulator-fixed";
140 regulator-name = "5P0V";
141 regulator-min-microvolt = <5000000>;
142 regulator-max-microvolt = <5000000>;
143 regulator-always-on;
144 };
145
146 reg_3p3v: regulator-3p3v {
147 compatible = "regulator-fixed";
148 regulator-name = "3P3V";
149 regulator-min-microvolt = <3300000>;
150 regulator-max-microvolt = <3300000>;
151 regulator-always-on;
152 };
153
154 reg_2p5v: regulator-2p5v {
155 compatible = "regulator-fixed";
156 regulator-name = "2P5V";
157 regulator-min-microvolt = <2500000>;
158 regulator-max-microvolt = <2500000>;
159 regulator-always-on;
160 };
161
162 reg_usb_h1_vbus: regulator-usb-h1-vbus {
163 compatible = "regulator-fixed";
164 regulator-name = "usb_h1_vbus";
165 regulator-min-microvolt = <5000000>;
166 regulator-max-microvolt = <5000000>;
167 gpio = <&gpio3 30 0>;
168 enable-active-high;
169 };
170
171 reg_usb_otg_vbus: regulator-usb-otg-vbus {
172 compatible = "regulator-fixed";
173 regulator-name = "usb_otg_vbus";
174 regulator-min-microvolt = <5000000>;
175 regulator-max-microvolt = <5000000>;
176 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
177 enable-active-high;
178 };
179
180 reg_12p0: regulator-12p0v {
181 compatible = "regulator-fixed";
182 regulator-name = "12P0V";
183 regulator-min-microvolt = <12000000>;
184 regulator-max-microvolt = <12000000>;
185 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
186 enable-active-high;
187 };
188
189 sound {
190 compatible = "fsl,imx-audio-tlv320";
191 model = "imx-tlv320";
192 ssi-controller = <&ssi1>;
193 audio-codec = <&tlv320aic3105>;
194 /* routing of sink, source */
195 audio-routing =
196 /* TLV320 LINE1L pin <-> Mic Jack connector */
197 "LINE1L", "Mic Jack",
198 /* board Headphone Jack <-> HPOUT */
199 "Headphone Jack", "HPLOUT",
200 "Headphone Jack", "HPROUT",
201 "Mic Jack", "Mic Bias";
202 mux-int-port = <1>;
203 mux-ext-port = <6>;
204 };
205};
206
207&audmux {
208 pinctrl-names = "default";
209 pinctrl-0 = <&pinctrl_audmux>;
210 status = "okay";
211};
212
213&clks {
214 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
215 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
216 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
217 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
218};
219
220&fec {
221 pinctrl-names = "default";
222 pinctrl-0 = <&pinctrl_enet>;
223 phy-mode = "rgmii-id";
224 status = "okay";
225};
226
227&i2c1 {
228 clock-frequency = <100000>;
229 pinctrl-names = "default";
230 pinctrl-0 = <&pinctrl_i2c1>;
231 status = "okay";
232
233 gsc: gsc@20 {
234 compatible = "gw,gsc";
235 reg = <0x20>;
236 interrupt-parent = <&gpio1>;
237 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
238 interrupt-controller;
239 #interrupt-cells = <1>;
240 #size-cells = <0>;
241
242 adc {
243 compatible = "gw,gsc-adc";
244 #address-cells = <1>;
245 #size-cells = <0>;
246
247 channel@0 {
248 gw,mode = <0>;
249 reg = <0x00>;
250 label = "temp";
251 };
252
253 channel@2 {
254 gw,mode = <1>;
255 reg = <0x02>;
256 label = "vdd_vin";
257 };
258
259 channel@5 {
260 gw,mode = <1>;
261 reg = <0x05>;
262 label = "vdd_3p3";
263 };
264
265 channel@8 {
266 gw,mode = <1>;
267 reg = <0x08>;
268 label = "vdd_bat";
269 };
270
271 channel@b {
272 gw,mode = <1>;
273 reg = <0x0b>;
274 label = "vdd_5p0";
275 };
276
277 channel@e {
278 gw,mode = <1>;
279 reg = <0xe>;
280 label = "vdd_arm";
281 };
282
283 channel@11 {
284 gw,mode = <1>;
285 reg = <0x11>;
286 label = "vdd_soc";
287 };
288
289 channel@14 {
290 gw,mode = <1>;
291 reg = <0x14>;
292 label = "vdd_3p0";
293 };
294
295 channel@17 {
296 gw,mode = <1>;
297 reg = <0x17>;
298 label = "vdd_1p5";
299 };
300
301 channel@1d {
302 gw,mode = <1>;
303 reg = <0x1d>;
304 label = "vdd_1p8";
305 };
306
307 channel@20 {
308 gw,mode = <1>;
309 reg = <0x20>;
310 label = "vdd_an1";
311 };
312
313 channel@23 {
314 gw,mode = <1>;
315 reg = <0x23>;
316 label = "vdd_2p5";
317 };
318 };
319 };
320
321 gsc_gpio: gpio@23 {
322 compatible = "nxp,pca9555";
323 reg = <0x23>;
324 gpio-controller;
325 #gpio-cells = <2>;
326 interrupt-parent = <&gsc>;
327 interrupts = <4>;
328 };
329
330 eeprom1: eeprom@50 {
331 compatible = "atmel,24c02";
332 reg = <0x50>;
333 pagesize = <16>;
334 };
335
336 eeprom2: eeprom@51 {
337 compatible = "atmel,24c02";
338 reg = <0x51>;
339 pagesize = <16>;
340 };
341
342 eeprom3: eeprom@52 {
343 compatible = "atmel,24c02";
344 reg = <0x52>;
345 pagesize = <16>;
346 };
347
348 eeprom4: eeprom@53 {
349 compatible = "atmel,24c02";
350 reg = <0x53>;
351 pagesize = <16>;
352 };
353
354 dts1672: rtc@68 {
355 compatible = "dallas,ds1672";
356 reg = <0x68>;
357 };
358};
359
360&i2c2 {
361 clock-frequency = <400000>;
362 pinctrl-names = "default";
363 pinctrl-0 = <&pinctrl_i2c2>;
364 status = "okay";
365
366 ltc3676: pmic@3c {
367 compatible = "lltc,ltc3676";
368 reg = <0x3c>;
369 interrupt-parent = <&gpio1>;
370 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
371
372 regulators {
373 /* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
374 reg_1p8v: sw1 {
375 regulator-name = "vdd1p8";
376 regulator-min-microvolt = <1033310>;
377 regulator-max-microvolt = <2004000>;
378 lltc,fb-voltage-divider = <301000 200000>;
379 regulator-ramp-delay = <7000>;
380 regulator-boot-on;
381 regulator-always-on;
382 };
383
384 /* VDD_DDR (1+R1/R2 = 2.105) */
385 reg_vdd_ddr: sw2 {
386 regulator-name = "vddddr";
387 regulator-min-microvolt = <868310>;
388 regulator-max-microvolt = <1684000>;
389 lltc,fb-voltage-divider = <221000 200000>;
390 regulator-ramp-delay = <7000>;
391 regulator-boot-on;
392 regulator-always-on;
393 };
394
395 /* VDD_ARM (1+R1/R2 = 1.635) */
396 reg_vdd_arm: sw3 {
397 regulator-name = "vddarm";
398 regulator-min-microvolt = <674400>;
399 regulator-max-microvolt = <1308000>;
400 lltc,fb-voltage-divider = <127000 200000>;
401 regulator-ramp-delay = <7000>;
402 regulator-boot-on;
403 regulator-always-on;
404 linux,phandle = <&reg_vdd_arm>;
405 };
406
407 /* VDD_SOC (1+R1/R2 = 1.635) */
408 reg_vdd_soc: sw4 {
409 regulator-name = "vddsoc";
410 regulator-min-microvolt = <674400>;
411 regulator-max-microvolt = <1308000>;
412 lltc,fb-voltage-divider = <127000 200000>;
413 regulator-ramp-delay = <7000>;
414 regulator-boot-on;
415 regulator-always-on;
416 linux,phandle = <&reg_vdd_soc>;
417 };
418
419 /* VDD_1P0 (1+R1/R2 = 1.38): */
420 reg_1p0v: ldo2 {
421 regulator-name = "vdd1p0";
422 regulator-min-microvolt = <1002777>;
423 regulator-max-microvolt = <1002777>;
424 lltc,fb-voltage-divider = <100000 261000>;
425 regulator-boot-on;
426 regulator-always-on;
427 };
428
429 /* VDD_HIGH (1+R1/R2 = 4.17) */
430 reg_3p0v: ldo4 {
431 regulator-name = "vdd3p0";
432 regulator-min-microvolt = <3023250>;
433 regulator-max-microvolt = <3023250>;
434 lltc,fb-voltage-divider = <634000 200000>;
435 regulator-boot-on;
436 regulator-always-on;
437 };
438 };
439 };
440};
441
442&i2c3 {
443 clock-frequency = <400000>;
444 pinctrl-names = "default";
445 pinctrl-0 = <&pinctrl_i2c3>;
446 status = "okay";
447
448 tlv320aic3105: codec@18 {
449 compatible = "ti,tlv320aic3x";
450 reg = <0x18>;
451 reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
452 clocks = <&clks IMX6QDL_CLK_CKO>;
453 ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
454 /* Regulators */
455 DRVDD-supply = <&reg_3p3v>;
456 AVDD-supply = <&reg_3p3v>;
457 IOVDD-supply = <&reg_3p3v>;
458 DVDD-supply = <&reg_1p8v>;
459 };
460
461 accelerometer@1d {
462 compatible = "fsl,mma8451";
463 reg = <0x1d>;
464 interrupt-parent = <&gpio7>;
465 interrupts = <11 IRQ_TYPE_EDGE_RISING>;
466 interrupt-names = "INT2";
467 };
468
469 /* headphone detect */
470 ts3a227e@3b {
471 compatible = "ti,ts3a227e";
472 reg = <0x3b>;
473 interrupt-parent = <&gpio5>;
474 interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
475 ti,micbias = <4>; /* 2.5V micbias */
476 };
477};
478
479&ldb {
480 status = "okay";
481
482 lvds-channel@0 {
483 fsl,data-mapping = "spwg";
484 fsl,data-width = <18>;
485 status = "okay";
486
487 display-timings {
488 native-mode = <&timing0>;
489 timing0: g101evn010 {
490 clock-frequency = <68930000>;
491 hactive = <1280>;
492 vactive = <800>;
493 hback-porch = <220>;
494 hfront-porch = <40>;
495 vback-porch = <21>;
496 vfront-porch = <7>;
497 hsync-len = <60>;
498 vsync-len = <10>;
499 };
500 };
501 };
502};
503
504&pwm1 {
505 #pwm-cells = <2>;
506 pinctrl-names = "default";
507 pinctrl-0 = <&pinctrl_pwm1>;
508 status = "okay";
509};
510
511&ssi1 {
512 status = "okay";
513};
514
515&uart1 {
516 pinctrl-names = "default";
517 pinctrl-0 = <&pinctrl_uart1>;
518 status = "okay";
519};
520
521&uart2 {
522 pinctrl-names = "default";
523 pinctrl-0 = <&pinctrl_uart2>;
524 status = "okay";
525};
526
527&usbotg {
528 vbus-supply = <&reg_usb_otg_vbus>;
529 pinctrl-names = "default";
530 pinctrl-0 = <&pinctrl_usbotg>;
531 disable-over-current;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]532 status = "okay";
533};
534
535&usbh1 {
536 vbus-supply = <&reg_usb_h1_vbus>;
537 status = "okay";
538};
539
540&usdhc1 {
541 pinctrl-names = "default";
542 pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
543 vmmc-supply = <&reg_3p3v>;
544 non-removable;
545 bus-width = <4>;
546 status = "okay";
547};
548
549&usdhc2 {
550 pinctrl-names = "default", "state_100mhz", "state_200mhz";
551 pinctrl-0 = <&pinctrl_usdhc2>;
552 pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
553 pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
554 cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
555 vmmc-supply = <&reg_3p3v>;
556 max-frequency = <100000000>;
557 status = "okay";
558};
559
560&usdhc3 {
561 pinctrl-names = "default", "state_100mhz", "state_200mhz";
562 pinctrl-0 = <&pinctrl_usdhc3>;
563 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
564 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
565 non-removable;
566 vmmc-supply = <&reg_3p3v>;
567 keep-power-in-suspend;
568 status = "okay";
569};
570
571&wdog1 {
572 pinctrl-names = "default";
573 pinctrl-0 = <&pinctrl_wdog>;
574 fsl,ext-reset-output;
575};
576
577&iomuxc {
578 pinctrl_audmux: audmuxgrp {
579 fsl,pins = <
580 MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x130b0
581 MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x130b0
582 MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x130b0
583 MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x130b0
584 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* MCK */
585 >;
586 };
587
588 pinctrl_enet: enetgrp {
589 fsl,pins = <
590 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
591 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
592 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
593 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
594 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
595 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
596 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
597 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
598 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
599 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
600 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
601 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
602 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
603 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
604 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
605 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */
606 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x4001b0b0 /* PHY_EN */
607 >;
608 };
609
610 pinctrl_gpio_leds: gpioledsgrp {
611 fsl,pins = <
612 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
613 >;
614 };
615
616 pinctrl_i2c1: i2c1grp {
617 fsl,pins = <
618 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
619 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
620 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */
621 >;
622 };
623
624 pinctrl_i2c2: i2c2grp {
625 fsl,pins = <
626 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
627 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
628 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
629 >;
630 };
631
632 pinctrl_i2c3: i2c3grp {
633 fsl,pins = <
634 /* I2C3 */
635 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
636 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
637
638 /* Headphone Detect */
639 MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x0001b0b0 /* HPDET_IRQ# */
640 MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x0001b0b0 /* HPDET_MIC# */
641
642 /* Codec */
643 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x0001b0b0 /* CODEC_RST# */
644
645 /* Touch Controller */
646 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b0b0 /* TOUCH_IRQ# */
647 MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b0b0 /* TOUCH_RST */
648
649 /* Stow Sensor */
650 MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x0001b0b0 /* ACCEL_IRQ2 */
651 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b0b0 /* ACCEL_IRQ1 */
652 >;
653 };
654
655 pinctrl_pwm1: pwm1grp {
656 fsl,pins = <
657 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
658 >;
659 };
660
661 pinctrl_uart1: uart1grp {
662 fsl,pins = <
663 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
664 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
665 MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b1 /* TXEN */
666 >;
667 };
668
669 pinctrl_uart2: uart2grp {
670 fsl,pins = <
671 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
672 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
673 >;
674 };
675
676 pinctrl_usbotg: usbotggrp {
677 fsl,pins = <
678 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
679 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x4001b0b0 /* PWR_EN */
680 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
681 >;
682 };
683
684 pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
685 fsl,pins = <
686 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x4001b0b0 /* EMMY_EN */
687 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x4001b0b0 /* EMMY_CFG1# */
688 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x4001b0b0 /* EMMY_CFG2# */
689 MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x0001b0b0 /* EMMY_BTWAKE# */
690 MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x0001b0b0 /* EMMY_WFWAKE# */
691
692 MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
693 MX6QDL_PAD_SD1_CMD__SD1_CMD 0x100f9
694 MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
695 MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
696 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
697 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
698 >;
699 };
700
701 pinctrl_usdhc2: usdhc2grp {
702 fsl,pins = <
703 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
704 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
705 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
706 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
707 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
708 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
709 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x17059 /* CD */
710 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x17059
711 >;
712 };
713
714 pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
715 fsl,pins = <
716 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
717 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
718 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
719 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
720 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
721 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
722 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170b9 /* CD */
723 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170b9
724 >;
725 };
726
727 pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
728 fsl,pins = <
729 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
730 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
731 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
732 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
733 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
734 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
735 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x170f9 /* CD */
736 MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x170f9
737 >;
738 };
739
740 pinctrl_usdhc3: usdhc3grp {
741 fsl,pins = <
742 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
743 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
744 MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059
745 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
746 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
747 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
748 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
749 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
750 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
751 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
752 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
753 >;
754 };
755
756 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
757 fsl,pins = <
758 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
759 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
760 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9
761 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
762 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
763 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
764 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
765 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
766 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
767 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
768 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
769 >;
770 };
771
772 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
773 fsl,pins = <
774 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
775 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
776 MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9
777 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
778 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
779 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
780 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
781 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
782 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
783 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
784 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
785 >;
786 };
787
788 pinctrl_wdog: wdoggrp {
789 fsl,pins = <
790 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
791 >;
792 };
793};