| Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| Siva Durga Prasad Paladugu | c8a6bad | 2018-01-05 16:16:15 +0530 | [diff] [blame] | 2 | /* |
| 3 | * dts file for Xilinx ZynqMP Mini Configuration |
| 4 | * |
| 5 | * (C) Copyright 2018, Xilinx, Inc. |
| 6 | * |
| 7 | * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> |
| 8 | * Michal Simek <michal.simek@xilinx.com> |
| Siva Durga Prasad Paladugu | c8a6bad | 2018-01-05 16:16:15 +0530 | [diff] [blame] | 9 | */ |
| 10 | |
| 11 | /dts-v1/; |
| 12 | |
| 13 | / { |
| 14 | model = "ZynqMP MINI NAND"; |
| 15 | compatible = "xlnx,zynqmp"; |
| 16 | #address-cells = <2>; |
| 17 | #size-cells = <1>; |
| 18 | |
| 19 | aliases { |
| 20 | serial0 = &dcc; |
| 21 | }; |
| 22 | |
| 23 | chosen { |
| 24 | stdout-path = "serial0:115200n8"; |
| 25 | }; |
| 26 | |
| 27 | memory@0 { |
| 28 | device_type = "memory"; |
| 29 | reg = <0x0 0x0 0x40000000>; |
| 30 | }; |
| 31 | |
| 32 | dcc: dcc { |
| 33 | compatible = "arm,dcc"; |
| 34 | status = "disabled"; |
| 35 | u-boot,dm-pre-reloc; |
| 36 | }; |
| 37 | |
| 38 | amba: amba { |
| 39 | compatible = "simple-bus"; |
| 40 | #address-cells = <2>; |
| 41 | #size-cells = <1>; |
| 42 | ranges; |
| 43 | |
| 44 | nand0: nand@ff100000 { |
| 45 | compatible = "arasan,nfc-v3p10"; |
| 46 | status = "okay"; |
| 47 | reg = <0x0 0xff100000 0x1000>; |
| 48 | clock-names = "clk_sys", "clk_flash"; |
| 49 | #address-cells = <2>; |
| 50 | #size-cells = <1>; |
| 51 | arasan,has-mdma; |
| 52 | num-cs = <2>; |
| 53 | |
| 54 | partition@0 { /* for testing purpose */ |
| 55 | label = "nand-fsbl-uboot"; |
| 56 | reg = <0x0 0x0 0x400000>; |
| 57 | }; |
| 58 | partition@1 { /* for testing purpose */ |
| 59 | label = "nand-linux"; |
| 60 | reg = <0x0 0x400000 0x1400000>; |
| 61 | }; |
| 62 | partition@2 { /* for testing purpose */ |
| 63 | label = "nand-device-tree"; |
| 64 | reg = <0x0 0x1800000 0x400000>; |
| 65 | }; |
| 66 | partition@3 { /* for testing purpose */ |
| 67 | label = "nand-rootfs"; |
| 68 | reg = <0x0 0x1C00000 0x1400000>; |
| 69 | }; |
| 70 | partition@4 { /* for testing purpose */ |
| 71 | label = "nand-bitstream"; |
| 72 | reg = <0x0 0x3000000 0x400000>; |
| 73 | }; |
| 74 | partition@5 { /* for testing purpose */ |
| 75 | label = "nand-misc"; |
| 76 | reg = <0x0 0x3400000 0xFCC00000>; |
| 77 | }; |
| 78 | partition@6 { /* for testing purpose */ |
| 79 | label = "nand1-fsbl-uboot"; |
| 80 | reg = <0x1 0x0 0x400000>; |
| 81 | }; |
| 82 | partition@7 { /* for testing purpose */ |
| 83 | label = "nand1-linux"; |
| 84 | reg = <0x1 0x400000 0x1400000>; |
| 85 | }; |
| 86 | partition@8 { /* for testing purpose */ |
| 87 | label = "nand1-device-tree"; |
| 88 | reg = <0x1 0x1800000 0x400000>; |
| 89 | }; |
| 90 | partition@9 { /* for testing purpose */ |
| 91 | label = "nand1-rootfs"; |
| 92 | reg = <0x1 0x1C00000 0x1400000>; |
| 93 | }; |
| 94 | partition@10 { /* for testing purpose */ |
| 95 | label = "nand1-bitstream"; |
| 96 | reg = <0x1 0x3000000 0x400000>; |
| 97 | }; |
| 98 | partition@11 { /* for testing purpose */ |
| 99 | label = "nand1-misc"; |
| 100 | reg = <0x1 0x3400000 0xFCC00000>; |
| 101 | }; |
| 102 | }; |
| 103 | }; |
| 104 | }; |
| 105 | |
| 106 | &dcc { |
| 107 | status = "okay"; |
| 108 | }; |