| Walter Schweizer | a0a868b | 2016-10-06 23:29:56 +0200 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2011 |
| 3 | * Jason Cooper <u-boot@lakedaemon.net> |
| 4 | * |
| 5 | * Based on work by: |
| 6 | * Marvell Semiconductor <www.marvell.com> |
| 7 | * Written-by: Siddarth Gore <gores@marvell.com> |
| 8 | * |
| 9 | * SPDX-License-Identifier: GPL-2.0+ |
| 10 | */ |
| 11 | |
| 12 | #ifndef _CONFIG_DS109_H |
| 13 | #define _CONFIG_DS109_H |
| 14 | |
| 15 | /* |
| 16 | * FIXME: This belongs in mach-types.h. However, we only pull mach-types |
| 17 | * from Linus' kernel.org tree. This hasn't been updated primarily due to |
| 18 | * the recent arch/arm reshuffling. So, in the meantime, we'll place it |
| 19 | * here. |
| 20 | */ |
| 21 | #include <asm/mach-types.h> |
| 22 | #ifdef MACH_TYPE_SYNOLOGY |
| 23 | #error "MACH_TYPE_SYNOLOGY has been defined properly, please remove this." |
| 24 | #else |
| 25 | #define MACH_TYPE_SYNOLOGY 527 |
| 26 | #endif |
| 27 | |
| 28 | /* |
| 29 | * High Level Configuration Options (easy to change) |
| 30 | */ |
| 31 | #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ |
| 32 | #define CONFIG_MACH_TYPE MACH_TYPE_SYNOLOGY |
| 33 | |
| 34 | /* |
| 35 | * Commands configuration |
| 36 | */ |
| 37 | #define CONFIG_CMD_EXT2 |
| 38 | #define CONFIG_CMD_FAT |
| 39 | |
| 40 | /* |
| 41 | * mv-plug-common.h should be defined after CMD configs since it used them |
| 42 | * to enable certain macros |
| 43 | */ |
| 44 | #include "mv-plug-common.h" |
| 45 | |
| 46 | /* |
| 47 | * Environment variables configurations |
| 48 | */ |
| 49 | #ifdef CONFIG_SPI_FLASH |
| 50 | #define CONFIG_ENV_IS_IN_SPI_FLASH 1 |
| 51 | #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ |
| 52 | #else |
| 53 | #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ |
| 54 | #endif |
| 55 | |
| 56 | #ifdef CONFIG_CMD_SF |
| 57 | #define CONFIG_HARD_SPI 1 |
| 58 | #define CONFIG_KIRKWOOD_SPI 1 |
| 59 | #define CONFIG_ENV_SPI_BUS 0 |
| 60 | #define CONFIG_ENV_SPI_CS 0 |
| 61 | #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ |
| 62 | #endif |
| 63 | |
| 64 | /* |
| 65 | * max 4k env size is enough, but in case of nand |
| 66 | * it has to be rounded to sector size |
| 67 | */ |
| 68 | #define CONFIG_ENV_SIZE 0x10000 |
| 69 | #define CONFIG_ENV_ADDR 0x3d0000 |
| 70 | #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ |
| 71 | |
| 72 | /* |
| 73 | * Default environment variables |
| 74 | */ |
| 75 | #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ |
| 76 | "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ |
| 77 | "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ |
| 78 | "bootm 0x6400000;" |
| 79 | |
| 80 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 81 | "x_bootcmd_ethernet=ping 192.168.1.2\0" \ |
| 82 | "x_bootcmd_usb=usb start\0" \ |
| 83 | "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ |
| 84 | "x_bootargs=console=ttyS0,115200\0" \ |
| 85 | "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ |
| 86 | "ipaddr=192.168.1.5\0" |
| 87 | |
| 88 | /* |
| 89 | * Ethernet Driver configuration |
| 90 | */ |
| 91 | #ifdef CONFIG_CMD_NET |
| 92 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ |
| 93 | #define CONFIG_PHY_BASE_ADR 8 |
| 94 | #endif /* CONFIG_CMD_NET */ |
| 95 | |
| 96 | /* |
| 97 | * SATA Driver configuration |
| 98 | */ |
| 99 | #ifdef CONFIG_MVSATA_IDE |
| 100 | #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET |
| 101 | #endif /*CONFIG_MVSATA_IDE*/ |
| 102 | |
| 103 | #endif /* _CONFIG_DS109_H */ |