blob: 134bb45887aba2f28df53c6cb8838e3abc017fc4 [file] [log] [blame]
Stefan Roese5d6050f2014-12-10 10:15:23 +01001/*
2 * Copyright (C) 2014, Barco (www.barco.com)
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#ifndef __PLATINUM_CONFIG_H__
8#define __PLATINUM_CONFIG_H__
9
10#define CONFIG_SYS_GENERIC_BOARD
11
12/* SPL */
13#define CONFIG_SPL_NAND_SUPPORT
14#define CONFIG_SPL_MMC_SUPPORT
15
16/* Location in NAND to read U-Boot from */
17#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
18
19#include "imx6_spl.h" /* common IMX6 SPL configuration */
20#include "mx6_common.h"
21#include <asm/arch/imx-regs.h>
22#include <asm/imx-common/gpio.h>
23
24/*
25 * Console configuration
26 */
27
28#include <config_cmd_default.h>
29#define CONFIG_CMD_BMODE
30#define CONFIG_CMD_DHCP
31#define CONFIG_CMD_EXT2
32#define CONFIG_CMD_FAT
33#define CONFIG_CMD_FUSE
34#define CONFIG_CMD_GPIO
35#define CONFIG_CMD_I2C
36#undef CONFIG_CMD_IMLS
37#define CONFIG_CMD_MII
38#define CONFIG_CMD_MMC
39#define CONFIG_CMD_MTDPARTS
40#define CONFIG_CMD_NAND
41#define CONFIG_CMD_NAND_TRIMFFS
42#define CONFIG_CMD_NET
43#define CONFIG_CMD_PING
44#define CONFIG_CMD_TIME
45#define CONFIG_CMD_UBI
46#define CONFIG_CMD_UBIFS
47#define CONFIG_CMD_USB
48
49/*
50 * Hardware configuration
51 */
52
53/* GPIO config */
54#define CONFIG_MXC_GPIO
55
56/* UART config */
57#define CONFIG_MXC_UART
58#define CONFIG_MXC_UART_BASE UART1_BASE
59#define CONFIG_BAUDRATE 115200
60#define CONFIG_CONS_INDEX 1
61
62/* I2C config */
63#define CONFIG_SYS_I2C
64#define CONFIG_SYS_I2C_MXC
65#define CONFIG_SYS_I2C_SPEED 100000
66
67/* MMC config */
68#define CONFIG_FSL_ESDHC
69#define CONFIG_FSL_USDHC
70#define CONFIG_SYS_FSL_ESDHC_ADDR 0
71#define CONFIG_SYS_FSL_USDHC_NUM 1
72#define CONFIG_MMC
73#define CONFIG_GENERIC_MMC
74#define CONFIG_BOUNCE_BUFFER
75#define CONFIG_DOS_PARTITION
76
77/* Ethernet config */
78#define CONFIG_FEC_MXC
79#define CONFIG_MII
80#define IMX_FEC_BASE ENET_BASE_ADDR
81
82#define CONFIG_PHYLIB
83
84/* USB config */
85#define CONFIG_USB_EHCI
86#define CONFIG_USB_EHCI_MX6
87#define CONFIG_USB_STORAGE
88#define CONFIG_MXC_USB_PORT 1
89#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
90#define CONFIG_MXC_USB_FLAGS 0
91
92/* Memory config */
93#define CONFIG_NR_DRAM_BANKS 1
94#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
95#ifndef PHYS_SDRAM_SIZE
96#define PHYS_SDRAM_SIZE (1024 << 20)
97#endif
98
99#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
100#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
101#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
102
103#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
104 GENERATED_GBL_DATA_SIZE)
105#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
106 CONFIG_SYS_INIT_SP_OFFSET)
107
108#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
109
110/* FLASH and environment organization */
111#define CONFIG_SYS_NO_FLASH
112
113#ifdef CONFIG_CMD_NAND
114
115/* NAND config */
116#define CONFIG_NAND_MXS
117#ifndef CONFIG_SYS_NAND_MAX_CHIPS
118#define CONFIG_SYS_NAND_MAX_CHIPS 2
119#endif
120#define CONFIG_SYS_MAX_NAND_DEVICE 1
121#define CONFIG_SYS_NAND_BASE 0x40000000
122#define CONFIG_SYS_NAND_5_ADDR_CYCLE
123#define CONFIG_SYS_NAND_ONFI_DETECTION
124
125/* DMA config, needed for GPMI/MXS NAND support */
126#define CONFIG_APBH_DMA
127#define CONFIG_APBH_DMA_BURST
128#define CONFIG_APBH_DMA_BURST8
129
130/* Fuse support */
131#define CONFIG_MXC_OCOTP
132
133/* Environment in NAND */
134#define CONFIG_ENV_IS_IN_NAND
135#define CONFIG_ENV_OFFSET (16 << 20)
136#define CONFIG_ENV_SECT_SIZE (128 << 10)
137#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
138#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
139#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
140
141#else /* CONFIG_CMD_NAND */
142
143/* Environment in MMC */
144#define CONFIG_ENV_SIZE (8 << 10)
145#define CONFIG_ENV_IS_IN_MMC
146#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
147#define CONFIG_SYS_MMC_ENV_DEV 0
148
149#endif /* CONFIG_CMD_NAND */
150
151/*
152 * U-Boot configuration
153 */
154
155/* Console boot messages */
156#define CONFIG_DISPLAY_CPUINFO
157#define CONFIG_DISPLAY_BOARDINFO
158
159/* Tag config */
160#define CONFIG_CMDLINE_TAG
161#define CONFIG_SETUP_MEMORY_TAGS
162#define CONFIG_INITRD_TAG
163#define CONFIG_REVISION_TAG
164
165/* Board startup config */
166#define CONFIG_BOARD_EARLY_INIT_F
167#define CONFIG_MISC_INIT_R
168
169/* allow to overwrite serial and ethaddr */
170#define CONFIG_ENV_OVERWRITE
171
172/* Device tree support */
173#define CONFIG_OF_LIBFDT
174
175#define CONFIG_LOADADDR 0x12000000
176#define CONFIG_SYS_TEXT_BASE 0x17800000
177
178#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
179#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
180 PHYS_SDRAM_SIZE - (12 << 20))
181
182#define CONFIG_BOOTDELAY 3
183#define CONFIG_BOOTCOMMAND "run bootubi_scr"
184
185/* Miscellaneous configurable options */
186#define CONFIG_SYS_LONGHELP
187#define CONFIG_SYS_HUSH_PARSER
188
189#define CONFIG_AUTO_COMPLETE
190#define CONFIG_CMDLINE_EDITING
191#define CONFIG_PREBOOT
192
193#define CONFIG_SYS_CBSIZE 256
194
195/* Print Buffer Size */
196#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
197 sizeof(CONFIG_SYS_PROMPT) + 16)
198#define CONFIG_SYS_MAXARGS 16
199#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
200
201#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
202
203/* MTD/UBI/UBIFS config */
204#define CONFIG_LZO
205#define CONFIG_MTD_DEVICE
206#define CONFIG_MTD_PARTITIONS
207#define CONFIG_RBTREE
208
209#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
210#define MTDIDS_DEFAULT "nand0=gpmi-nand"
211#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
212 "512k(env1),512k(env2),-(ubi)"
213#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
214#define MTDIDS_DEFAULT "nand0=gpmi-nand"
215#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
216 "512k(env1),512k(env2),495M(ubi0)," \
217 "14M(res0),2M(res1)," \
218 "512k(res2),512k(res3),-(ubi1)"
219#endif
220
221#ifndef CONFIG_SYS_DCACHE_OFF
222#define CONFIG_CMD_CACHE
223#endif
224
225/*
226 * Environment configuration
227 */
228
229#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
230#define CONFIG_COMMON_ENV_UBI \
231 "setubipartition=env set ubipartition ubi\0" \
232 "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
233#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
234#define CONFIG_COMMON_ENV_UBI \
235 "setubipartition=env set ubipartition ubi$boot_vol\0" \
236 "setubirfs=env set ubirfs ubi0:rootfs\0"
237#endif
238
239#define CONFIG_COMMON_ENV_MISC \
240 "user=user\0" \
241 "project="CONFIG_PLATINUM_PROJECT"\0" \
242 "uimage=uImage\0" \
243 "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
244 "serverip=serverip\0" \
245 "memaddrlinux=0x10800000\0" \
246 "memaddrsrc=0x11000000\0" \
247 "memaddrdtb=0x12000000\0" \
248 "console=ttymxc0\0" \
249 "baudrate=115200\0" \
250 "boot_scr=boot.uboot\0" \
251 "boot_vol=0\0" \
252 "mtdids="MTDIDS_DEFAULT"\0" \
253 "mtdparts="MTDPARTS_DEFAULT"\0" \
254 "mmcfs=ext2\0" \
255 "mmcrootpart=1\0" \
256 \
257 "setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
258 "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
259 "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
260 "setubifilelinux=env set ubifilelinux boot/$uimage\0" \
261 "setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
262 "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
263 "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
264 "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
265 \
266 "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
267 "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
268 "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
269 "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
270 "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
271 "$mmcfilelinux\0" \
272 "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
273 "$mmcfiledtb\0" \
274 \
275 "ubipart=ubi part $ubipartition\0" \
276 "ubimount=ubifsmount $ubirfs\0" \
277 \
278 "setbootargscommon=env set bootargs $bootargs " \
279 "console=$console,$baudrate enable_wait_mode=off\0" \
280 "setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
281 "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
282 "setbootargsubirfs=env set bootargs $bootargs " \
283 "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
284 "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
285 "nfsroot=$serverip:$nfspath,v3,tcp\0" \
286 "setbootargsmmcrfs=env set bootargs $bootargs " \
287 "root=$mmcrootdev rootwait rw\0" \
288 \
289 "bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
290 "setbootargscommon setbootargsmtd setbootargsdhcp " \
291 "setbootargsnfsrfs;" \
292 "run loadtftpkernel loadtftpdtb;" \
293 "bootm $memaddrlinux - $memaddrdtb\0" \
294 "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
295 "run setubipartition setubirfs;" \
296 "run setbootargscommon setbootargsmtd " \
297 "setbootargsubirfs;" \
298 "run loadtftpkernel loadtftpdtb;" \
299 "bootm $memaddrlinux - $memaddrdtb\0" \
300 "bootubi=run setubipartition setubirfs setubifilelinux " \
301 "setubipfiledtb;" \
302 "run setbootargscommon setbootargsmtd " \
303 "setbootargsubirfs;" \
304 "run ubipart ubimount loadubikernel loadubidtb;" \
305 "bootm $memaddrlinux - $memaddrdtb\0" \
306 "bootubi_scr=run setubipartition setubirfs;" \
307 "run ubipart ubimount;" \
308 "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
309 "then source ${memaddrsrc}; else run bootubi; fi\0" \
310 "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
311 "setbootargscommon setbootargsmmcrfs;" \
312 "run loadmmckernel loadmmcdtb;" \
313 "bootm $memaddrlinux - $memaddrdtb\0" \
314 \
315 "bootcmd="CONFIG_BOOTCOMMAND"\0"
316
317#define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
318 CONFIG_COMMON_ENV_UBI
319#endif /* __PLATINUM_CONFIG_H__ */