Miquel Raynal | 5db66b3 | 2018-09-29 12:58:28 +0200 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * mtd.c |
| 4 | * |
| 5 | * Generic command to handle basic operations on any memory device. |
| 6 | * |
| 7 | * Copyright: Bootlin, 2018 |
| 8 | * Author: Miquèl Raynal <miquel.raynal@bootlin.com> |
| 9 | */ |
| 10 | |
| 11 | #include <command.h> |
| 12 | #include <common.h> |
| 13 | #include <console.h> |
| 14 | #include <malloc.h> |
| 15 | #include <mapmem.h> |
| 16 | #include <mtd.h> |
| 17 | |
| 18 | static uint mtd_len_to_pages(struct mtd_info *mtd, u64 len) |
| 19 | { |
| 20 | do_div(len, mtd->writesize); |
| 21 | |
| 22 | return len; |
| 23 | } |
| 24 | |
| 25 | static bool mtd_is_aligned_with_min_io_size(struct mtd_info *mtd, u64 size) |
| 26 | { |
| 27 | return !do_div(size, mtd->writesize); |
| 28 | } |
| 29 | |
| 30 | static bool mtd_is_aligned_with_block_size(struct mtd_info *mtd, u64 size) |
| 31 | { |
| 32 | return !do_div(size, mtd->erasesize); |
| 33 | } |
| 34 | |
| 35 | static void mtd_dump_buf(const u8 *buf, uint len, uint offset) |
| 36 | { |
| 37 | int i, j; |
| 38 | |
| 39 | for (i = 0; i < len; ) { |
| 40 | printf("0x%08x:\t", offset + i); |
| 41 | for (j = 0; j < 8; j++) |
| 42 | printf("%02x ", buf[i + j]); |
| 43 | printf(" "); |
| 44 | i += 8; |
| 45 | for (j = 0; j < 8; j++) |
| 46 | printf("%02x ", buf[i + j]); |
| 47 | printf("\n"); |
| 48 | i += 8; |
| 49 | } |
| 50 | } |
| 51 | |
| 52 | static void mtd_dump_device_buf(struct mtd_info *mtd, u64 start_off, |
| 53 | const u8 *buf, u64 len, bool woob) |
| 54 | { |
| 55 | bool has_pages = mtd->type == MTD_NANDFLASH || |
| 56 | mtd->type == MTD_MLCNANDFLASH; |
| 57 | int npages = mtd_len_to_pages(mtd, len); |
| 58 | uint page; |
| 59 | |
| 60 | if (has_pages) { |
| 61 | for (page = 0; page < npages; page++) { |
| 62 | u64 data_off = page * mtd->writesize; |
| 63 | |
| 64 | printf("\nDump %d data bytes from 0x%08llx:\n", |
| 65 | mtd->writesize, start_off + data_off); |
| 66 | mtd_dump_buf(&buf[data_off], |
| 67 | mtd->writesize, start_off + data_off); |
| 68 | |
| 69 | if (woob) { |
| 70 | u64 oob_off = page * mtd->oobsize; |
| 71 | |
| 72 | printf("Dump %d OOB bytes from page at 0x%08llx:\n", |
| 73 | mtd->oobsize, start_off + data_off); |
| 74 | mtd_dump_buf(&buf[len + oob_off], |
| 75 | mtd->oobsize, 0); |
| 76 | } |
| 77 | } |
| 78 | } else { |
| 79 | printf("\nDump %lld data bytes from 0x%llx:\n", |
| 80 | len, start_off); |
| 81 | mtd_dump_buf(buf, len, start_off); |
| 82 | } |
| 83 | } |
| 84 | |
| 85 | static void mtd_show_parts(struct mtd_info *mtd, int level) |
| 86 | { |
| 87 | struct mtd_info *part; |
| 88 | int i; |
| 89 | |
| 90 | list_for_each_entry(part, &mtd->partitions, node) { |
| 91 | for (i = 0; i < level; i++) |
| 92 | printf("\t"); |
| 93 | printf(" - 0x%012llx-0x%012llx : \"%s\"\n", |
| 94 | part->offset, part->offset + part->size, part->name); |
| 95 | |
| 96 | mtd_show_parts(part, level + 1); |
| 97 | } |
| 98 | } |
| 99 | |
| 100 | static void mtd_show_device(struct mtd_info *mtd) |
| 101 | { |
| 102 | /* Device */ |
| 103 | printf("* %s\n", mtd->name); |
| 104 | #if defined(CONFIG_DM) |
| 105 | if (mtd->dev) { |
| 106 | printf(" - device: %s\n", mtd->dev->name); |
| 107 | printf(" - parent: %s\n", mtd->dev->parent->name); |
| 108 | printf(" - driver: %s\n", mtd->dev->driver->name); |
| 109 | } |
| 110 | #endif |
| 111 | |
| 112 | /* MTD device information */ |
| 113 | printf(" - type: "); |
| 114 | switch (mtd->type) { |
| 115 | case MTD_RAM: |
| 116 | printf("RAM\n"); |
| 117 | break; |
| 118 | case MTD_ROM: |
| 119 | printf("ROM\n"); |
| 120 | break; |
| 121 | case MTD_NORFLASH: |
| 122 | printf("NOR flash\n"); |
| 123 | break; |
| 124 | case MTD_NANDFLASH: |
| 125 | printf("NAND flash\n"); |
| 126 | break; |
| 127 | case MTD_DATAFLASH: |
| 128 | printf("Data flash\n"); |
| 129 | break; |
| 130 | case MTD_UBIVOLUME: |
| 131 | printf("UBI volume\n"); |
| 132 | break; |
| 133 | case MTD_MLCNANDFLASH: |
| 134 | printf("MLC NAND flash\n"); |
| 135 | break; |
| 136 | case MTD_ABSENT: |
| 137 | default: |
| 138 | printf("Unknown\n"); |
| 139 | break; |
| 140 | } |
| 141 | |
| 142 | printf(" - block size: 0x%x bytes\n", mtd->erasesize); |
| 143 | printf(" - min I/O: 0x%x bytes\n", mtd->writesize); |
| 144 | |
| 145 | if (mtd->oobsize) { |
| 146 | printf(" - OOB size: %u bytes\n", mtd->oobsize); |
| 147 | printf(" - OOB available: %u bytes\n", mtd->oobavail); |
| 148 | } |
| 149 | |
| 150 | if (mtd->ecc_strength) { |
| 151 | printf(" - ECC strength: %u bits\n", mtd->ecc_strength); |
| 152 | printf(" - ECC step size: %u bytes\n", mtd->ecc_step_size); |
| 153 | printf(" - bitflip threshold: %u bits\n", |
| 154 | mtd->bitflip_threshold); |
| 155 | } |
| 156 | |
| 157 | printf(" - 0x%012llx-0x%012llx : \"%s\"\n", |
| 158 | mtd->offset, mtd->offset + mtd->size, mtd->name); |
| 159 | |
| 160 | /* MTD partitions, if any */ |
| 161 | mtd_show_parts(mtd, 1); |
| 162 | } |
| 163 | |
| 164 | /* Logic taken from fs/ubifs/recovery.c:is_empty() */ |
| 165 | static bool mtd_oob_write_is_empty(struct mtd_oob_ops *op) |
| 166 | { |
| 167 | int i; |
| 168 | |
| 169 | for (i = 0; i < op->len; i++) |
| 170 | if (op->datbuf[i] != 0xff) |
| 171 | return false; |
| 172 | |
| 173 | for (i = 0; i < op->ooblen; i++) |
| 174 | if (op->oobbuf[i] != 0xff) |
| 175 | return false; |
| 176 | |
| 177 | return true; |
| 178 | } |
| 179 | |
| 180 | static int do_mtd_list(void) |
| 181 | { |
| 182 | struct mtd_info *mtd; |
| 183 | int dev_nb = 0; |
| 184 | |
| 185 | /* Ensure all devices (and their partitions) are probed */ |
| 186 | mtd_probe_devices(); |
| 187 | |
| 188 | printf("List of MTD devices:\n"); |
| 189 | mtd_for_each_device(mtd) { |
| 190 | if (!mtd_is_partition(mtd)) |
| 191 | mtd_show_device(mtd); |
| 192 | |
| 193 | dev_nb++; |
| 194 | } |
| 195 | |
| 196 | if (!dev_nb) { |
| 197 | printf("No MTD device found\n"); |
| 198 | return CMD_RET_FAILURE; |
| 199 | } |
| 200 | |
| 201 | return CMD_RET_SUCCESS; |
| 202 | } |
| 203 | |
| 204 | static int mtd_special_write_oob(struct mtd_info *mtd, u64 off, |
| 205 | struct mtd_oob_ops *io_op, |
| 206 | bool write_empty_pages, bool woob) |
| 207 | { |
| 208 | int ret = 0; |
| 209 | |
| 210 | /* |
| 211 | * By default, do not write an empty page. |
| 212 | * Skip it by simulating a successful write. |
| 213 | */ |
| 214 | if (!write_empty_pages && mtd_oob_write_is_empty(io_op)) { |
| 215 | io_op->retlen = mtd->writesize; |
| 216 | io_op->oobretlen = woob ? mtd->oobsize : 0; |
| 217 | } else { |
| 218 | ret = mtd_write_oob(mtd, off, io_op); |
| 219 | } |
| 220 | |
| 221 | return ret; |
| 222 | } |
| 223 | |
| 224 | static int do_mtd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| 225 | { |
| 226 | struct mtd_info *mtd; |
| 227 | const char *cmd; |
| 228 | char *mtd_name; |
| 229 | |
| 230 | /* All MTD commands need at least two arguments */ |
| 231 | if (argc < 2) |
| 232 | return CMD_RET_USAGE; |
| 233 | |
| 234 | /* Parse the command name and its optional suffixes */ |
| 235 | cmd = argv[1]; |
| 236 | |
| 237 | /* List the MTD devices if that is what the user wants */ |
| 238 | if (strcmp(cmd, "list") == 0) |
| 239 | return do_mtd_list(); |
| 240 | |
| 241 | /* |
| 242 | * The remaining commands require also at least a device ID. |
| 243 | * Check the selected device is valid. Ensure it is probed. |
| 244 | */ |
| 245 | if (argc < 3) |
| 246 | return CMD_RET_USAGE; |
| 247 | |
| 248 | mtd_name = argv[2]; |
| 249 | mtd_probe_devices(); |
| 250 | mtd = get_mtd_device_nm(mtd_name); |
| 251 | if (IS_ERR_OR_NULL(mtd)) { |
| 252 | printf("MTD device %s not found, ret %ld\n", |
| 253 | mtd_name, PTR_ERR(mtd)); |
| 254 | return CMD_RET_FAILURE; |
| 255 | } |
| 256 | put_mtd_device(mtd); |
| 257 | |
| 258 | argc -= 3; |
| 259 | argv += 3; |
| 260 | |
| 261 | /* Do the parsing */ |
| 262 | if (!strncmp(cmd, "read", 4) || !strncmp(cmd, "dump", 4) || |
| 263 | !strncmp(cmd, "write", 5)) { |
| 264 | bool has_pages = mtd->type == MTD_NANDFLASH || |
| 265 | mtd->type == MTD_MLCNANDFLASH; |
| 266 | bool dump, read, raw, woob, write_empty_pages; |
| 267 | struct mtd_oob_ops io_op = {}; |
| 268 | uint user_addr = 0, npages; |
| 269 | u64 start_off, off, len, remaining, default_len; |
| 270 | u32 oob_len; |
| 271 | u8 *buf; |
| 272 | int ret; |
| 273 | |
| 274 | dump = !strncmp(cmd, "dump", 4); |
| 275 | read = dump || !strncmp(cmd, "read", 4); |
| 276 | raw = strstr(cmd, ".raw"); |
| 277 | woob = strstr(cmd, ".oob"); |
| 278 | write_empty_pages = !has_pages || strstr(cmd, ".dontskipff"); |
| 279 | |
| 280 | if (!dump) { |
| 281 | if (!argc) |
| 282 | return CMD_RET_USAGE; |
| 283 | |
| 284 | user_addr = simple_strtoul(argv[0], NULL, 16); |
| 285 | argc--; |
| 286 | argv++; |
| 287 | } |
| 288 | |
| 289 | start_off = argc > 0 ? simple_strtoul(argv[0], NULL, 16) : 0; |
| 290 | if (!mtd_is_aligned_with_min_io_size(mtd, start_off)) { |
| 291 | printf("Offset not aligned with a page (0x%x)\n", |
| 292 | mtd->writesize); |
| 293 | return CMD_RET_FAILURE; |
| 294 | } |
| 295 | |
| 296 | default_len = dump ? mtd->writesize : mtd->size; |
| 297 | len = argc > 1 ? simple_strtoul(argv[1], NULL, 16) : |
| 298 | default_len; |
| 299 | if (!mtd_is_aligned_with_min_io_size(mtd, len)) { |
| 300 | len = round_up(len, mtd->writesize); |
| 301 | printf("Size not on a page boundary (0x%x), rounding to 0x%llx\n", |
| 302 | mtd->writesize, len); |
| 303 | } |
| 304 | |
| 305 | remaining = len; |
| 306 | npages = mtd_len_to_pages(mtd, len); |
| 307 | oob_len = woob ? npages * mtd->oobsize : 0; |
| 308 | |
| 309 | if (dump) |
| 310 | buf = kmalloc(len + oob_len, GFP_KERNEL); |
| 311 | else |
| 312 | buf = map_sysmem(user_addr, 0); |
| 313 | |
| 314 | if (!buf) { |
| 315 | printf("Could not map/allocate the user buffer\n"); |
| 316 | return CMD_RET_FAILURE; |
| 317 | } |
| 318 | |
| 319 | if (has_pages) |
| 320 | printf("%s %lld byte(s) (%d page(s)) at offset 0x%08llx%s%s%s\n", |
| 321 | read ? "Reading" : "Writing", len, npages, start_off, |
| 322 | raw ? " [raw]" : "", woob ? " [oob]" : "", |
| 323 | !read && write_empty_pages ? " [dontskipff]" : ""); |
| 324 | else |
| 325 | printf("%s %lld byte(s) at offset 0x%08llx\n", |
| 326 | read ? "Reading" : "Writing", len, start_off); |
| 327 | |
| 328 | io_op.mode = raw ? MTD_OPS_RAW : MTD_OPS_AUTO_OOB; |
| 329 | io_op.len = has_pages ? mtd->writesize : len; |
| 330 | io_op.ooblen = woob ? mtd->oobsize : 0; |
| 331 | io_op.datbuf = buf; |
| 332 | io_op.oobbuf = woob ? &buf[len] : NULL; |
| 333 | |
| 334 | /* Search for the first good block after the given offset */ |
| 335 | off = start_off; |
| 336 | while (mtd_block_isbad(mtd, off)) |
| 337 | off += mtd->erasesize; |
| 338 | |
| 339 | /* Loop over the pages to do the actual read/write */ |
| 340 | while (remaining) { |
| 341 | /* Skip the block if it is bad */ |
| 342 | if (mtd_is_aligned_with_block_size(mtd, off) && |
| 343 | mtd_block_isbad(mtd, off)) { |
| 344 | off += mtd->erasesize; |
| 345 | continue; |
| 346 | } |
| 347 | |
| 348 | if (read) |
| 349 | ret = mtd_read_oob(mtd, off, &io_op); |
| 350 | else |
| 351 | ret = mtd_special_write_oob(mtd, off, &io_op, |
| 352 | write_empty_pages, |
| 353 | woob); |
| 354 | |
| 355 | if (ret) { |
| 356 | printf("Failure while %s at offset 0x%llx\n", |
| 357 | read ? "reading" : "writing", off); |
| 358 | return CMD_RET_FAILURE; |
| 359 | } |
| 360 | |
| 361 | off += io_op.retlen; |
| 362 | remaining -= io_op.retlen; |
| 363 | io_op.datbuf += io_op.retlen; |
| 364 | io_op.oobbuf += io_op.oobretlen; |
| 365 | } |
| 366 | |
| 367 | if (!ret && dump) |
| 368 | mtd_dump_device_buf(mtd, start_off, buf, len, woob); |
| 369 | |
| 370 | if (dump) |
| 371 | kfree(buf); |
| 372 | else |
| 373 | unmap_sysmem(buf); |
| 374 | |
| 375 | if (ret) { |
| 376 | printf("%s on %s failed with error %d\n", |
| 377 | read ? "Read" : "Write", mtd->name, ret); |
| 378 | return CMD_RET_FAILURE; |
| 379 | } |
| 380 | |
| 381 | } else if (!strcmp(cmd, "erase")) { |
| 382 | bool scrub = strstr(cmd, ".dontskipbad"); |
| 383 | struct erase_info erase_op = {}; |
| 384 | u64 off, len; |
| 385 | int ret; |
| 386 | |
| 387 | off = argc > 0 ? simple_strtoul(argv[0], NULL, 16) : 0; |
| 388 | len = argc > 1 ? simple_strtoul(argv[1], NULL, 16) : mtd->size; |
| 389 | |
| 390 | if (!mtd_is_aligned_with_block_size(mtd, off)) { |
| 391 | printf("Offset not aligned with a block (0x%x)\n", |
| 392 | mtd->erasesize); |
| 393 | return CMD_RET_FAILURE; |
| 394 | } |
| 395 | |
| 396 | if (!mtd_is_aligned_with_block_size(mtd, len)) { |
| 397 | printf("Size not a multiple of a block (0x%x)\n", |
| 398 | mtd->erasesize); |
| 399 | return CMD_RET_FAILURE; |
| 400 | } |
| 401 | |
| 402 | printf("Erasing 0x%08llx ... 0x%08llx (%d eraseblock(s))\n", |
| 403 | off, off + len - 1, mtd_div_by_eb(len, mtd)); |
| 404 | |
| 405 | erase_op.mtd = mtd; |
| 406 | erase_op.addr = off; |
| 407 | erase_op.len = len; |
| 408 | erase_op.scrub = scrub; |
| 409 | |
| 410 | while (erase_op.len) { |
| 411 | ret = mtd_erase(mtd, &erase_op); |
| 412 | |
| 413 | /* Abort if its not a bad block error */ |
| 414 | if (ret != -EIO) |
| 415 | break; |
| 416 | |
| 417 | printf("Skipping bad block at 0x%08llx\n", |
| 418 | erase_op.fail_addr); |
| 419 | |
| 420 | /* Skip bad block and continue behind it */ |
| 421 | erase_op.len -= erase_op.fail_addr - erase_op.addr; |
| 422 | erase_op.len -= mtd->erasesize; |
| 423 | erase_op.addr = erase_op.fail_addr + mtd->erasesize; |
| 424 | } |
| 425 | |
| 426 | if (ret && ret != -EIO) |
| 427 | return CMD_RET_FAILURE; |
| 428 | } else if (!strcmp(cmd, "bad")) { |
| 429 | loff_t off; |
| 430 | |
| 431 | if (!mtd_can_have_bb(mtd)) { |
| 432 | printf("Only NAND-based devices can have bad blocks\n"); |
| 433 | return CMD_RET_SUCCESS; |
| 434 | } |
| 435 | |
| 436 | printf("MTD device %s bad blocks list:\n", mtd->name); |
| 437 | for (off = 0; off < mtd->size; off += mtd->erasesize) |
| 438 | if (mtd_block_isbad(mtd, off)) |
| 439 | printf("\t0x%08llx\n", off); |
| 440 | } else { |
| 441 | return CMD_RET_USAGE; |
| 442 | } |
| 443 | |
| 444 | return CMD_RET_SUCCESS; |
| 445 | } |
| 446 | |
| 447 | static char mtd_help_text[] = |
| 448 | #ifdef CONFIG_SYS_LONGHELP |
| 449 | "- generic operations on memory technology devices\n\n" |
| 450 | "mtd list\n" |
| 451 | "mtd read[.raw][.oob] <name> <addr> [<off> [<size>]]\n" |
| 452 | "mtd dump[.raw][.oob] <name> [<off> [<size>]]\n" |
| 453 | "mtd write[.raw][.oob][.dontskipff] <name> <addr> [<off> [<size>]]\n" |
| 454 | "mtd erase[.dontskipbad] <name> [<off> [<size>]]\n" |
| 455 | "\n" |
| 456 | "Specific functions:\n" |
| 457 | "mtd bad <name>\n" |
| 458 | "\n" |
| 459 | "With:\n" |
| 460 | "\t<name>: NAND partition/chip name\n" |
| 461 | "\t<addr>: user address from/to which data will be retrieved/stored\n" |
| 462 | "\t<off>: offset in <name> in bytes (default: start of the part)\n" |
| 463 | "\t\t* must be block-aligned for erase\n" |
| 464 | "\t\t* must be page-aligned otherwise\n" |
| 465 | "\t<size>: length of the operation in bytes (default: the entire device)\n" |
| 466 | "\t\t* must be a multiple of a block for erase\n" |
| 467 | "\t\t* must be a multiple of a page otherwise (special case: default is a page with dump)\n" |
| 468 | "\n" |
| 469 | "The .dontskipff option forces writing empty pages, don't use it if unsure.\n" |
| 470 | #endif |
| 471 | ""; |
| 472 | |
| 473 | U_BOOT_CMD(mtd, 10, 1, do_mtd, "MTD utils", mtd_help_text); |