Sébastien Szymanski | 77f2929 | 2017-03-07 14:33:25 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2017 Armadeus Systems <support@armadeus.com> |
| 3 | * |
| 4 | * This file is dual-licensed: you can use it either under the terms |
| 5 | * of the GPL or the X11 license, at your option. Note that this dual |
| 6 | * licensing only applies to this file, and not this project as a |
| 7 | * whole. |
| 8 | * |
| 9 | * a) This file is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License as |
| 11 | * published by the Free Software Foundation; either version 2 of |
| 12 | * the License, or (at your option) any later version. |
| 13 | * |
| 14 | * This file is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public |
| 20 | * License along with this file; if not, write to the Free |
| 21 | * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| 22 | * MA 02110-1301 USA |
| 23 | * |
| 24 | * Or, alternatively, |
| 25 | * |
| 26 | * b) Permission is hereby granted, free of charge, to any person |
| 27 | * obtaining a copy of this software and associated documentation |
| 28 | * files (the "Software"), to deal in the Software without |
| 29 | * restriction, including without limitation the rights to use, |
| 30 | * copy, modify, merge, publish, distribute, sublicense, and/or |
| 31 | * sell copies of the Software, and to permit persons to whom the |
| 32 | * Software is furnished to do so, subject to the following |
| 33 | * conditions: |
| 34 | * |
| 35 | * The above copyright notice and this permission notice shall be |
| 36 | * included in all copies or substantial portions of the Software. |
| 37 | * |
| 38 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 39 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 40 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 41 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 42 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 43 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 44 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 45 | * OTHER DEALINGS IN THE SOFTWARE. |
| 46 | */ |
| 47 | |
| 48 | #include "imx6ul.dtsi" |
| 49 | |
| 50 | / { |
| 51 | memory { |
| 52 | reg = <0x80000000 0>; /* will be filled by U-Boot */ |
| 53 | }; |
| 54 | |
| 55 | reg_3v3: regulator-3v3 { |
| 56 | compatible = "regulator-fixed"; |
| 57 | regulator-name = "3V3"; |
| 58 | regulator-min-microvolt = <3300000>; |
| 59 | regulator-max-microvolt = <3300000>; |
| 60 | }; |
| 61 | |
| 62 | usdhc3_pwrseq: usdhc3-pwrseq { |
| 63 | compatible = "mmc-pwrseq-simple"; |
| 64 | reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; |
| 65 | }; |
| 66 | }; |
| 67 | |
| 68 | &fec1 { |
| 69 | pinctrl-names = "default"; |
| 70 | pinctrl-0 = <&pinctrl_enet1>; |
| 71 | phy-mode = "rmii"; |
| 72 | phy-reset-duration = <1>; |
| 73 | phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; |
| 74 | phy-handle = <ðphy1>; |
| 75 | phy-supply = <®_3v3>; |
| 76 | status = "okay"; |
| 77 | |
| 78 | mdio: mdio { |
| 79 | #address-cells = <1>; |
| 80 | #size-cells = <0>; |
| 81 | |
| 82 | ethphy1: ethernet-phy@1 { |
| 83 | compatible = "ethernet-phy-ieee802.3-c22"; |
| 84 | reg = <1>; |
| 85 | interrupt-parent = <&gpio4>; |
| 86 | interrupts = <16 IRQ_TYPE_LEVEL_LOW>; |
| 87 | status = "okay"; |
| 88 | }; |
| 89 | }; |
| 90 | }; |
| 91 | |
| 92 | /* Bluetooth */ |
| 93 | &uart8 { |
| 94 | pinctrl-names = "default"; |
| 95 | pinctrl-0 = <&pinctrl_uart8>; |
| 96 | uart-has-rtscts; |
| 97 | status = "okay"; |
| 98 | }; |
| 99 | |
| 100 | /* eMMC */ |
| 101 | &usdhc1 { |
| 102 | pinctrl-names = "default"; |
| 103 | pinctrl-0 = <&pinctrl_usdhc1>; |
| 104 | bus-width = <8>; |
| 105 | no-1-8-v; |
| 106 | non-removable; |
| 107 | status = "okay"; |
| 108 | }; |
| 109 | |
| 110 | /* WiFi */ |
| 111 | &usdhc2 { |
| 112 | pinctrl-names = "default"; |
| 113 | pinctrl-0 = <&pinctrl_usdhc2>; |
| 114 | bus-width = <4>; |
| 115 | no-1-8-v; |
| 116 | non-removable; |
| 117 | mmc-pwrseq = <&usdhc3_pwrseq>; |
| 118 | status = "okay"; |
| 119 | |
| 120 | #address-cells = <1>; |
| 121 | #size-cells = <0>; |
| 122 | |
| 123 | brcmf: bcrmf@1 { |
| 124 | compatible = "brcm,bcm4329-fmac"; |
| 125 | reg = <1>; |
| 126 | interrupt-parent = <&gpio2>; |
| 127 | interrupts = <8 IRQ_TYPE_LEVEL_LOW>; |
| 128 | interrupt-names = "host-wake"; |
| 129 | }; |
| 130 | }; |
| 131 | |
| 132 | &iomuxc { |
| 133 | pinctrl_enet1: enet1grp { |
| 134 | fsl,pins = < |
| 135 | MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 |
| 136 | MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 |
| 137 | MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0 |
| 138 | MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0 |
| 139 | MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0 |
| 140 | MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0 |
| 141 | MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 |
| 142 | MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 |
| 143 | MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 |
| 144 | /* INT# */ |
| 145 | MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 |
| 146 | /* RST# */ |
| 147 | MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0 |
| 148 | MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 |
| 149 | >; |
| 150 | }; |
| 151 | |
| 152 | pinctrl_uart8: uart8grp { |
| 153 | fsl,pins = < |
| 154 | MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0 |
| 155 | MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0 |
| 156 | MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0 |
| 157 | MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0 |
| 158 | /* BT_REG_ON */ |
| 159 | MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0 |
| 160 | >; |
| 161 | }; |
| 162 | |
| 163 | pinctrl_usdhc1: usdhc1grp { |
| 164 | fsl,pins = < |
| 165 | MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 |
| 166 | MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 |
| 167 | MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 |
| 168 | MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 |
| 169 | MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 |
| 170 | MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 |
| 171 | MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059 |
| 172 | MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059 |
| 173 | MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059 |
| 174 | MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059 |
| 175 | >; |
| 176 | }; |
| 177 | |
| 178 | pinctrl_usdhc2: usdhc2grp { |
| 179 | fsl,pins = < |
| 180 | MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0 |
| 181 | MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0 |
| 182 | MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0 |
| 183 | MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0 |
| 184 | MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0 |
| 185 | MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0 |
| 186 | /* WL_REG_ON */ |
| 187 | MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0 |
| 188 | /* WL_IRQ */ |
| 189 | MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 |
| 190 | >; |
| 191 | }; |
| 192 | }; |