Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 5fa96722485c44dcbf29be800e03d15e84264816 / . / arch / arm / dts / imx6qdl-gw54xx.dtsi
blob: e09fad6068ca5d5f3ff240f48c0104cbe11cae02 [file] [log] [blame]
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/linux-event-codes.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9#include <dt-bindings/sound/fsl-imx-audmux.h>
10
11/ {
12 /* these are used by bootloader for disabling nodes */
13 aliases {
14 led0 = &led0;
15 led1 = &led1;
16 led2 = &led2;
Tim Harvey19a387f2021-03-01 14:33:35 -0800[diff] [blame]17 mmc0 = &usdhc3;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]18 nand = &gpmi;
19 ssi0 = &ssi1;
20 usb0 = &usbh1;
21 usb1 = &usbotg;
22 };
23
24 chosen {
25 bootargs = "console=ttymxc1,115200";
26 };
27
28 backlight {
29 compatible = "pwm-backlight";
30 pwms = <&pwm4 0 5000000>;
31 brightness-levels = <0 4 8 16 32 64 128 255>;
32 default-brightness-level = <7>;
33 };
34
35 gpio-keys {
36 compatible = "gpio-keys";
37 #address-cells = <1>;
38 #size-cells = <0>;
39
40 user-pb {
41 label = "user_pb";
42 gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
43 linux,code = <BTN_0>;
44 };
45
46 user-pb1x {
47 label = "user_pb1x";
48 linux,code = <BTN_1>;
49 interrupt-parent = <&gsc>;
50 interrupts = <0>;
51 };
52
53 key-erased {
54 label = "key-erased";
55 linux,code = <BTN_2>;
56 interrupt-parent = <&gsc>;
57 interrupts = <1>;
58 };
59
60 eeprom-wp {
61 label = "eeprom_wp";
62 linux,code = <BTN_3>;
63 interrupt-parent = <&gsc>;
64 interrupts = <2>;
65 };
66
67 tamper {
68 label = "tamper";
69 linux,code = <BTN_4>;
70 interrupt-parent = <&gsc>;
71 interrupts = <5>;
72 };
73
74 switch-hold {
75 label = "switch_hold";
76 linux,code = <BTN_5>;
77 interrupt-parent = <&gsc>;
78 interrupts = <7>;
79 };
80 };
81
82 leds {
83 compatible = "gpio-leds";
84 pinctrl-names = "default";
85 pinctrl-0 = <&pinctrl_gpio_leds>;
86
87 led0: user1 {
88 label = "user1";
89 gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
90 default-state = "on";
91 linux,default-trigger = "heartbeat";
92 };
93
94 led1: user2 {
95 label = "user2";
96 gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
97 default-state = "off";
98 };
99
100 led2: user3 {
101 label = "user3";
102 gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
103 default-state = "off";
104 };
105 };
106
107 memory@10000000 {
108 device_type = "memory";
109 reg = <0x10000000 0x40000000>;
110 };
111
112 pps {
113 compatible = "pps-gpio";
114 pinctrl-names = "default";
115 pinctrl-0 = <&pinctrl_pps>;
116 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
117 status = "okay";
118 };
119
120 regulators {
121 compatible = "simple-bus";
122 #address-cells = <1>;
123 #size-cells = <0>;
124
125 reg_1p0v: regulator@0 {
126 compatible = "regulator-fixed";
127 reg = <0>;
128 regulator-name = "1P0V";
129 regulator-min-microvolt = <1000000>;
130 regulator-max-microvolt = <1000000>;
131 regulator-always-on;
132 };
133
134 reg_3p3v: regulator@1 {
135 compatible = "regulator-fixed";
136 reg = <1>;
137 regulator-name = "3P3V";
138 regulator-min-microvolt = <3300000>;
139 regulator-max-microvolt = <3300000>;
140 regulator-always-on;
141 };
142
143 reg_usb_h1_vbus: regulator@2 {
144 compatible = "regulator-fixed";
145 reg = <2>;
146 regulator-name = "usb_h1_vbus";
147 regulator-min-microvolt = <5000000>;
148 regulator-max-microvolt = <5000000>;
149 regulator-always-on;
150 };
151
152 reg_usb_otg_vbus: regulator@3 {
153 compatible = "regulator-fixed";
154 reg = <3>;
155 regulator-name = "usb_otg_vbus";
156 regulator-min-microvolt = <5000000>;
157 regulator-max-microvolt = <5000000>;
158 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
159 enable-active-high;
160 };
161 };
162
163 sound-analog {
164 compatible = "fsl,imx6q-ventana-sgtl5000",
165 "fsl,imx-audio-sgtl5000";
166 model = "sgtl5000-audio";
167 ssi-controller = <&ssi1>;
168 audio-codec = <&sgtl5000>;
169 audio-routing =
170 "MIC_IN", "Mic Jack",
171 "Mic Jack", "Mic Bias",
172 "Headphone Jack", "HP_OUT";
173 mux-int-port = <1>;
174 mux-ext-port = <4>;
175 };
176};
177
178&audmux {
179 pinctrl-names = "default";
180 pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
181 status = "okay";
182
183 ssi2 {
184 fsl,audmux-port = <1>;
185 fsl,port-config = <
186 (IMX_AUDMUX_V2_PTCR_TFSDIR |
187 IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
188 IMX_AUDMUX_V2_PTCR_TCLKDIR |
189 IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
190 IMX_AUDMUX_V2_PTCR_SYN)
191 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
192 >;
193 };
194
195 aud5 {
196 fsl,audmux-port = <4>;
197 fsl,port-config = <
198 IMX_AUDMUX_V2_PTCR_SYN
199 IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
200 };
201};
202
203&can1 {
204 pinctrl-names = "default";
205 pinctrl-0 = <&pinctrl_flexcan1>;
206 status = "okay";
207};
208
209&clks {
210 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
211 <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
212 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
213 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
214};
215
216&ecspi2 {
217 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
218 pinctrl-names = "default";
219 pinctrl-0 = <&pinctrl_ecspi2>;
220 status = "okay";
221};
222
223&fec {
224 pinctrl-names = "default";
225 pinctrl-0 = <&pinctrl_enet>;
226 phy-mode = "rgmii-id";
227 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
Tim Harveycd18f1e2021-05-03 11:21:27 -0700[diff] [blame]228 phy-reset-duration = <10>;
229 phy-reset-post-delay = <100>;
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]230 status = "okay";
231};
232
233&gpmi {
234 pinctrl-names = "default";
235 pinctrl-0 = <&pinctrl_gpmi_nand>;
236 status = "okay";
237};
238
239&hdmi {
240 ddc-i2c-bus = <&i2c3>;
241 status = "okay";
242};
243
244&i2c1 {
245 clock-frequency = <100000>;
246 pinctrl-names = "default";
247 pinctrl-0 = <&pinctrl_i2c1>;
248 status = "okay";
249
250 gsc: gsc@20 {
251 compatible = "gw,gsc";
252 reg = <0x20>;
253 interrupt-parent = <&gpio1>;
254 interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
255 interrupt-controller;
256 #interrupt-cells = <1>;
257 #address-cells = <1>;
258 #size-cells = <0>;
259
260 adc {
261 compatible = "gw,gsc-adc";
262 #address-cells = <1>;
263 #size-cells = <0>;
264
265 channel@0 {
266 gw,mode = <0>;
267 reg = <0x00>;
268 label = "temp";
269 };
270
271 channel@2 {
272 gw,mode = <1>;
273 reg = <0x02>;
274 label = "vdd_vin";
275 };
276
277 channel@5 {
278 gw,mode = <1>;
279 reg = <0x05>;
280 label = "vdd_3p3";
281 };
282
283 channel@8 {
284 gw,mode = <1>;
285 reg = <0x08>;
286 label = "vdd_bat";
287 };
288
289 channel@b {
290 gw,mode = <1>;
291 reg = <0x0b>;
292 label = "vdd_5p0";
293 };
294
295 channel@e {
296 gw,mode = <1>;
297 reg = <0xe>;
298 label = "vdd_arm";
299 };
300
301 channel@11 {
302 gw,mode = <1>;
303 reg = <0x11>;
304 label = "vdd_soc";
305 };
306
307 channel@14 {
308 gw,mode = <1>;
309 reg = <0x14>;
310 label = "vdd_3p0";
311 };
312
313 channel@17 {
314 gw,mode = <1>;
315 reg = <0x17>;
316 label = "vdd_1p5";
317 };
318
319 channel@1d {
320 gw,mode = <1>;
321 reg = <0x1d>;
322 label = "vdd_1p8";
323 };
324
325 channel@20 {
326 gw,mode = <1>;
327 reg = <0x20>;
328 label = "vdd_1p0";
329 };
330
331 channel@23 {
332 gw,mode = <1>;
333 reg = <0x23>;
334 label = "vdd_2p5";
335 };
336
337 channel@26 {
338 gw,mode = <1>;
339 reg = <0x26>;
340 label = "vdd_gps";
341 };
342 };
343
344 fan-controller@2c {
345 compatible = "gw,gsc-fan";
346 #address-cells = <1>;
347 #size-cells = <0>;
348 reg = <0x2c>;
349 };
350 };
351
352 gsc_gpio: gpio@23 {
353 compatible = "nxp,pca9555";
354 reg = <0x23>;
355 gpio-controller;
356 #gpio-cells = <2>;
357 interrupt-parent = <&gsc>;
358 interrupts = <4>;
359 };
360
361 eeprom1: eeprom@50 {
362 compatible = "atmel,24c02";
363 reg = <0x50>;
364 pagesize = <16>;
365 };
366
367 eeprom2: eeprom@51 {
368 compatible = "atmel,24c02";
369 reg = <0x51>;
370 pagesize = <16>;
371 };
372
373 eeprom3: eeprom@52 {
374 compatible = "atmel,24c02";
375 reg = <0x52>;
376 pagesize = <16>;
377 };
378
379 eeprom4: eeprom@53 {
380 compatible = "atmel,24c02";
381 reg = <0x53>;
382 pagesize = <16>;
383 };
384
385 rtc: ds1672@68 {
386 compatible = "dallas,ds1672";
387 reg = <0x68>;
388 };
389};
390
391&i2c2 {
392 clock-frequency = <100000>;
393 pinctrl-names = "default";
394 pinctrl-0 = <&pinctrl_i2c2>;
395 status = "okay";
396
397 pmic: pfuze100@8 {
398 compatible = "fsl,pfuze100";
399 reg = <0x08>;
400
401 regulators {
402 sw1a_reg: sw1ab {
403 regulator-min-microvolt = <300000>;
404 regulator-max-microvolt = <1875000>;
405 regulator-boot-on;
406 regulator-always-on;
407 regulator-ramp-delay = <6250>;
408 };
409
410 sw1c_reg: sw1c {
411 regulator-min-microvolt = <300000>;
412 regulator-max-microvolt = <1875000>;
413 regulator-boot-on;
414 regulator-always-on;
415 regulator-ramp-delay = <6250>;
416 };
417
418 sw2_reg: sw2 {
419 regulator-min-microvolt = <800000>;
420 regulator-max-microvolt = <3950000>;
421 regulator-boot-on;
422 regulator-always-on;
423 };
424
425 sw3a_reg: sw3a {
426 regulator-min-microvolt = <400000>;
427 regulator-max-microvolt = <1975000>;
428 regulator-boot-on;
429 regulator-always-on;
430 };
431
432 sw3b_reg: sw3b {
433 regulator-min-microvolt = <400000>;
434 regulator-max-microvolt = <1975000>;
435 regulator-boot-on;
436 regulator-always-on;
437 };
438
439 sw4_reg: sw4 {
440 regulator-min-microvolt = <800000>;
441 regulator-max-microvolt = <3300000>;
442 };
443
444 swbst_reg: swbst {
445 regulator-min-microvolt = <5000000>;
446 regulator-max-microvolt = <5150000>;
447 regulator-boot-on;
448 regulator-always-on;
449 };
450
451 snvs_reg: vsnvs {
452 regulator-min-microvolt = <1000000>;
453 regulator-max-microvolt = <3000000>;
454 regulator-boot-on;
455 regulator-always-on;
456 };
457
458 vref_reg: vrefddr {
459 regulator-boot-on;
460 regulator-always-on;
461 };
462
463 vgen1_reg: vgen1 {
464 regulator-min-microvolt = <800000>;
465 regulator-max-microvolt = <1550000>;
466 };
467
468 vgen2_reg: vgen2 {
469 regulator-min-microvolt = <800000>;
470 regulator-max-microvolt = <1550000>;
471 };
472
473 vgen3_reg: vgen3 {
474 regulator-min-microvolt = <1800000>;
475 regulator-max-microvolt = <3300000>;
476 };
477
478 vgen4_reg: vgen4 {
479 regulator-min-microvolt = <1800000>;
480 regulator-max-microvolt = <3300000>;
481 regulator-always-on;
482 };
483
484 vgen5_reg: vgen5 {
485 regulator-min-microvolt = <1800000>;
486 regulator-max-microvolt = <3300000>;
487 regulator-always-on;
488 };
489
490 vgen6_reg: vgen6 {
491 regulator-min-microvolt = <1800000>;
492 regulator-max-microvolt = <3300000>;
493 regulator-always-on;
494 };
495 };
496 };
497};
498
499&i2c3 {
500 clock-frequency = <100000>;
501 pinctrl-names = "default";
502 pinctrl-0 = <&pinctrl_i2c3>;
503 status = "okay";
504
505 sgtl5000: audio-codec@a {
506 compatible = "fsl,sgtl5000";
507 reg = <0x0a>;
508 clocks = <&clks IMX6QDL_CLK_CKO>;
509 VDDA-supply = <&sw4_reg>;
510 VDDIO-supply = <&reg_3p3v>;
511 };
512
513 touchscreen: egalax_ts@4 {
514 compatible = "eeti,egalax_ts";
515 reg = <0x04>;
516 interrupt-parent = <&gpio7>;
517 interrupts = <12 2>;
518 wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
519 };
520
521 accel@1e {
522 compatible = "nxp,fxos8700";
523 reg = <0x1e>;
524 };
525};
526
527&ldb {
528 status = "okay";
529
530 lvds-channel@0 {
531 fsl,data-mapping = "spwg";
532 fsl,data-width = <18>;
533 status = "okay";
534
535 display-timings {
536 native-mode = <&timing0>;
537 timing0: hsd100pxn1 {
538 clock-frequency = <65000000>;
539 hactive = <1024>;
540 vactive = <768>;
541 hback-porch = <220>;
542 hfront-porch = <40>;
543 vback-porch = <21>;
544 vfront-porch = <7>;
545 hsync-len = <60>;
546 vsync-len = <10>;
547 };
548 };
549 };
550};
551
552&pcie {
553 pinctrl-names = "default";
554 pinctrl-0 = <&pinctrl_pcie>;
555 reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
556 status = "okay";
557};
558
559&pwm1 {
560 pinctrl-names = "default";
561 pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
562 status = "disabled";
563};
564
565&pwm2 {
566 pinctrl-names = "default";
567 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
568 status = "disabled";
569};
570
571&pwm3 {
572 pinctrl-names = "default";
573 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
574 status = "disabled";
575};
576
577&pwm4 {
578 #pwm-cells = <2>;
579 pinctrl-names = "default", "state_dio";
580 pinctrl-0 = <&pinctrl_pwm4_backlight>;
581 pinctrl-1 = <&pinctrl_pwm4_dio>;
582 status = "okay";
583};
584
585&ssi1 {
586 status = "okay";
587};
588
589&ssi2 {
590 status = "okay";
591};
592
593&uart1 {
594 pinctrl-names = "default";
595 pinctrl-0 = <&pinctrl_uart1>;
596 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
597 status = "okay";
598};
599
600&uart2 {
601 pinctrl-names = "default";
602 pinctrl-0 = <&pinctrl_uart2>;
603 status = "okay";
604};
605
606&uart5 {
607 pinctrl-names = "default";
608 pinctrl-0 = <&pinctrl_uart5>;
609 status = "okay";
610};
611
612&usbotg {
613 vbus-supply = <&reg_usb_otg_vbus>;
614 pinctrl-names = "default";
615 pinctrl-0 = <&pinctrl_usbotg>;
616 disable-over-current;
Tim Harvey13acc632021-03-01 14:33:31 -0800[diff] [blame]617 dr_mode = "otg";
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]618 status = "okay";
619};
620
621&usbh1 {
622 vbus-supply = <&reg_usb_h1_vbus>;
623 status = "okay";
624};
625
626&usdhc3 {
627 pinctrl-names = "default", "state_100mhz", "state_200mhz";
628 pinctrl-0 = <&pinctrl_usdhc3>;
629 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
630 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
631 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
632 vmmc-supply = <&reg_3p3v>;
633 no-1-8-v; /* firmware will remove if board revision supports */
634 status = "okay";
635};
636
637&wdog1 {
638 status = "disabled";
639};
640
641&wdog2 {
642 pinctrl-names = "default";
643 pinctrl-0 = <&pinctrl_wdog>;
644 fsl,ext-reset-output;
645 status = "okay";
646};
647
648&iomuxc {
649 pinctrl_audmux: audmuxgrp {
650 fsl,pins = <
651 MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
652 MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
653 MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
654 MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
655 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
656 MX6QDL_PAD_EIM_D25__AUD5_RXC 0x130b0
657 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
658 MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x130b0
659 >;
660 };
661
662 pinctrl_enet: enetgrp {
663 fsl,pins = <
664 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
665 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
666 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
667 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
668 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
669 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
670 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
671 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
672 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
673 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
674 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
675 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
676 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
677 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
678 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
679 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
Tim Harveycd18f1e2021-05-03 11:21:27 -0700[diff] [blame]680 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
Tim Harveyacb9a132021-03-01 14:33:30 -0800[diff] [blame]681 >;
682 };
683
684 pinctrl_ecspi2: escpi2grp {
685 fsl,pins = <
686 MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
687 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
688 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
689 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1
690 >;
691 };
692
693 pinctrl_flexcan1: flexcan1grp {
694 fsl,pins = <
695 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
696 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
697 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0 /* CAN_STBY */
698 >;
699 };
700
701 pinctrl_gpio_leds: gpioledsgrp {
702 fsl,pins = <
703 MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
704 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
705 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
706 >;
707 };
708
709 pinctrl_gpmi_nand: gpminandgrp {
710 fsl,pins = <
711 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
712 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
713 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
714 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
715 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
716 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
717 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
718 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
719 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
720 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
721 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
722 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
723 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
724 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
725 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
726 >;
727 };
728
729 pinctrl_i2c1: i2c1grp {
730 fsl,pins = <
731 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
732 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
733 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1
734 >;
735 };
736
737 pinctrl_i2c2: i2c2grp {
738 fsl,pins = <
739 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
740 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
741 >;
742 };
743
744 pinctrl_i2c3: i2c3grp {
745 fsl,pins = <
746 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
747 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
748 >;
749 };
750
751 pinctrl_pcie: pciegrp {
752 fsl,pins = <
753 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
754 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
755 >;
756 };
757
758 pinctrl_pps: ppsgrp {
759 fsl,pins = <
760 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
761 >;
762 };
763
764 pinctrl_pwm1: pwm1grp {
765 fsl,pins = <
766 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
767 >;
768 };
769
770 pinctrl_pwm2: pwm2grp {
771 fsl,pins = <
772 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
773 >;
774 };
775
776 pinctrl_pwm3: pwm3grp {
777 fsl,pins = <
778 MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
779 >;
780 };
781
782 pinctrl_pwm4_backlight: pwm4grpbacklight {
783 fsl,pins = <
784 /* LVDS_PWM J6.5 */
785 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
786 >;
787 };
788
789 pinctrl_pwm4_dio: pwm4grpdio {
790 fsl,pins = <
791 /* DIO3 J16.4 */
792 MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
793 >;
794 };
795
796 pinctrl_uart1: uart1grp {
797 fsl,pins = <
798 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
799 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
800 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x4001b0b1 /* TEN */
801 >;
802 };
803
804 pinctrl_uart2: uart2grp {
805 fsl,pins = <
806 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
807 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
808 >;
809 };
810
811 pinctrl_uart5: uart5grp {
812 fsl,pins = <
813 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
814 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
815 >;
816 };
817
818 pinctrl_usbotg: usbotggrp {
819 fsl,pins = <
820 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
821 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
822 >;
823 };
824
825 pinctrl_usdhc3: usdhc3grp {
826 fsl,pins = <
827 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
828 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
829 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
830 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
831 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
832 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
833 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
834 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
835 >;
836 };
837
838 pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
839 fsl,pins = <
840 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
841 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
842 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
843 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
844 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
845 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
846 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
847 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
848 >;
849 };
850
851 pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
852 fsl,pins = <
853 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
854 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
855 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
856 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
857 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
858 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
859 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
860 MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
861 >;
862 };
863
864 pinctrl_wdog: wdoggrp {
865 fsl,pins = <
866 MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0
867 >;
868 };
869};