blob: dcecef8da859b467e08cf3cf0434658b758fb668 [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
2 * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
3 * Andreas Heppel <aheppel@sysgo.de>
4 *
5 * (C) Copyright 2002
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
8 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02009 * SPDX-License-Identifier: GPL-2.0+
wdenkc6097192002-11-03 00:24:07 +000010 */
11
12/*
13 * PCI routines
14 */
15
16#include <common.h>
Simon Glass0098e172014-04-10 20:01:30 -060017#include <bootretry.h>
Simon Glass18d66532014-04-10 20:01:25 -060018#include <cli.h>
wdenkc6097192002-11-03 00:24:07 +000019#include <command.h>
wdenkc6097192002-11-03 00:24:07 +000020#include <asm/processor.h>
21#include <asm/io.h>
wdenkc6097192002-11-03 00:24:07 +000022#include <pci.h>
23
wdenkc6097192002-11-03 00:24:07 +000024/*
25 * Follows routines for the output of infos about devices on PCI bus.
26 */
27
28void pci_header_show(pci_dev_t dev);
29void pci_header_show_brief(pci_dev_t dev);
30
31/*
32 * Subroutine: pciinfo
33 *
34 * Description: Show information about devices on PCI bus.
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020035 * Depending on the define CONFIG_SYS_SHORT_PCI_LISTING
wdenkc6097192002-11-03 00:24:07 +000036 * the output will be more or less exhaustive.
37 *
38 * Inputs: bus_no the number of the bus to be scanned.
39 *
40 * Return: None
41 *
42 */
43void pciinfo(int BusNum, int ShortPCIListing)
44{
Thierry Reding042b83d2014-11-12 18:26:48 -070045 struct pci_controller *hose = pci_bus_to_hose(BusNum);
wdenkc6097192002-11-03 00:24:07 +000046 int Device;
47 int Function;
48 unsigned char HeaderType;
49 unsigned short VendorID;
50 pci_dev_t dev;
Simon Glassff3e0772015-03-05 12:25:25 -070051 int ret;
wdenkc6097192002-11-03 00:24:07 +000052
Thierry Reding042b83d2014-11-12 18:26:48 -070053 if (!hose)
54 return;
55
wdenkc6097192002-11-03 00:24:07 +000056 printf("Scanning PCI devices on bus %d\n", BusNum);
57
58 if (ShortPCIListing) {
59 printf("BusDevFun VendorId DeviceId Device Class Sub-Class\n");
60 printf("_____________________________________________________________\n");
61 }
62
63 for (Device = 0; Device < PCI_MAX_PCI_DEVICES; Device++) {
64 HeaderType = 0;
65 VendorID = 0;
66 for (Function = 0; Function < PCI_MAX_PCI_FUNCTIONS; Function++) {
67 /*
68 * If this is not a multi-function device, we skip the rest.
69 */
70 if (Function && !(HeaderType & 0x80))
71 break;
72
73 dev = PCI_BDF(BusNum, Device, Function);
74
Thierry Reding4efe52b2014-11-12 18:26:49 -070075 if (pci_skip_dev(hose, dev))
76 continue;
77
Simon Glassff3e0772015-03-05 12:25:25 -070078 ret = pci_read_config_word(dev, PCI_VENDOR_ID,
79 &VendorID);
80 if (ret)
81 goto error;
wdenkc6097192002-11-03 00:24:07 +000082 if ((VendorID == 0xFFFF) || (VendorID == 0x0000))
83 continue;
84
wdenkc7de8292002-11-19 11:04:11 +000085 if (!Function) pci_read_config_byte(dev, PCI_HEADER_TYPE, &HeaderType);
wdenkc6097192002-11-03 00:24:07 +000086
87 if (ShortPCIListing)
88 {
89 printf("%02x.%02x.%02x ", BusNum, Device, Function);
90 pci_header_show_brief(dev);
91 }
92 else
93 {
94 printf("\nFound PCI device %02x.%02x.%02x:\n",
95 BusNum, Device, Function);
96 pci_header_show(dev);
97 }
Simon Glassff3e0772015-03-05 12:25:25 -070098 }
99 }
100
101 return;
102error:
103 printf("Cannot read bus configuration: %d\n", ret);
wdenkc6097192002-11-03 00:24:07 +0000104}
105
wdenkc6097192002-11-03 00:24:07 +0000106
107/*
108 * Subroutine: pci_header_show_brief
109 *
110 * Description: Reads and prints the header of the
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200111 * specified PCI device in short form.
wdenkc6097192002-11-03 00:24:07 +0000112 *
113 * Inputs: dev Bus+Device+Function number
114 *
115 * Return: None
116 *
117 */
118void pci_header_show_brief(pci_dev_t dev)
119{
120 u16 vendor, device;
121 u8 class, subclass;
122
123 pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
124 pci_read_config_word(dev, PCI_DEVICE_ID, &device);
125 pci_read_config_byte(dev, PCI_CLASS_CODE, &class);
126 pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass);
127
wdenk5d232d02003-05-22 22:52:13 +0000128 printf("0x%.4x 0x%.4x %-23s 0x%.2x\n",
wdenkc6097192002-11-03 00:24:07 +0000129 vendor, device,
Peter Tyser983eb9d2010-10-29 17:59:27 -0500130 pci_class_str(class), subclass);
wdenkc6097192002-11-03 00:24:07 +0000131}
132
133/*
134 * Subroutine: PCI_Header_Show
135 *
136 * Description: Reads the header of the specified PCI device.
137 *
138 * Inputs: BusDevFunc Bus+Device+Function number
139 *
140 * Return: None
141 *
142 */
143void pci_header_show(pci_dev_t dev)
144{
145 u8 _byte, header_type;
146 u16 _word;
147 u32 _dword;
148
149#define PRINT(msg, type, reg) \
150 pci_read_config_##type(dev, reg, &_##type); \
151 printf(msg, _##type)
152
153#define PRINT2(msg, type, reg, func) \
154 pci_read_config_##type(dev, reg, &_##type); \
155 printf(msg, _##type, func(_##type))
156
157 pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
158
159 PRINT (" vendor ID = 0x%.4x\n", word, PCI_VENDOR_ID);
160 PRINT (" device ID = 0x%.4x\n", word, PCI_DEVICE_ID);
161 PRINT (" command register = 0x%.4x\n", word, PCI_COMMAND);
162 PRINT (" status register = 0x%.4x\n", word, PCI_STATUS);
163 PRINT (" revision ID = 0x%.2x\n", byte, PCI_REVISION_ID);
164 PRINT2(" class code = 0x%.2x (%s)\n", byte, PCI_CLASS_CODE,
Peter Tyser983eb9d2010-10-29 17:59:27 -0500165 pci_class_str);
wdenkc6097192002-11-03 00:24:07 +0000166 PRINT (" sub class code = 0x%.2x\n", byte, PCI_CLASS_SUB_CODE);
167 PRINT (" programming interface = 0x%.2x\n", byte, PCI_CLASS_PROG);
168 PRINT (" cache line = 0x%.2x\n", byte, PCI_CACHE_LINE_SIZE);
169 PRINT (" latency time = 0x%.2x\n", byte, PCI_LATENCY_TIMER);
170 PRINT (" header type = 0x%.2x\n", byte, PCI_HEADER_TYPE);
171 PRINT (" BIST = 0x%.2x\n", byte, PCI_BIST);
172 PRINT (" base address 0 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_0);
wdenkc6097192002-11-03 00:24:07 +0000173
wdenk7c7a23b2002-12-07 00:20:59 +0000174 switch (header_type & 0x03) {
175 case PCI_HEADER_TYPE_NORMAL: /* "normal" PCI device */
176 PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
177 PRINT (" base address 2 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_2);
178 PRINT (" base address 3 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_3);
179 PRINT (" base address 4 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_4);
180 PRINT (" base address 5 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_5);
181 PRINT (" cardBus CIS pointer = 0x%.8x\n", dword, PCI_CARDBUS_CIS);
182 PRINT (" sub system vendor ID = 0x%.4x\n", word, PCI_SUBSYSTEM_VENDOR_ID);
183 PRINT (" sub system ID = 0x%.4x\n", word, PCI_SUBSYSTEM_ID);
184 PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS);
185 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
186 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
187 PRINT (" min Grant = 0x%.2x\n", byte, PCI_MIN_GNT);
188 PRINT (" max Latency = 0x%.2x\n", byte, PCI_MAX_LAT);
189 break;
wdenk8bde7f72003-06-27 21:31:46 +0000190
wdenk7c7a23b2002-12-07 00:20:59 +0000191 case PCI_HEADER_TYPE_BRIDGE: /* PCI-to-PCI bridge */
192
193 PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1);
wdenkc6097192002-11-03 00:24:07 +0000194 PRINT (" primary bus number = 0x%.2x\n", byte, PCI_PRIMARY_BUS);
195 PRINT (" secondary bus number = 0x%.2x\n", byte, PCI_SECONDARY_BUS);
196 PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_SUBORDINATE_BUS);
197 PRINT (" secondary latency timer = 0x%.2x\n", byte, PCI_SEC_LATENCY_TIMER);
198 PRINT (" IO base = 0x%.2x\n", byte, PCI_IO_BASE);
199 PRINT (" IO limit = 0x%.2x\n", byte, PCI_IO_LIMIT);
200 PRINT (" secondary status = 0x%.4x\n", word, PCI_SEC_STATUS);
201 PRINT (" memory base = 0x%.4x\n", word, PCI_MEMORY_BASE);
202 PRINT (" memory limit = 0x%.4x\n", word, PCI_MEMORY_LIMIT);
203 PRINT (" prefetch memory base = 0x%.4x\n", word, PCI_PREF_MEMORY_BASE);
204 PRINT (" prefetch memory limit = 0x%.4x\n", word, PCI_PREF_MEMORY_LIMIT);
205 PRINT (" prefetch memory base upper = 0x%.8x\n", dword, PCI_PREF_BASE_UPPER32);
206 PRINT (" prefetch memory limit upper = 0x%.8x\n", dword, PCI_PREF_LIMIT_UPPER32);
207 PRINT (" IO base upper 16 bits = 0x%.4x\n", word, PCI_IO_BASE_UPPER16);
208 PRINT (" IO limit upper 16 bits = 0x%.4x\n", word, PCI_IO_LIMIT_UPPER16);
209 PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS1);
210 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
211 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
212 PRINT (" bridge control = 0x%.4x\n", word, PCI_BRIDGE_CONTROL);
wdenk7c7a23b2002-12-07 00:20:59 +0000213 break;
214
215 case PCI_HEADER_TYPE_CARDBUS: /* PCI-to-CardBus bridge */
216
217 PRINT (" capabilities = 0x%.2x\n", byte, PCI_CB_CAPABILITY_LIST);
218 PRINT (" secondary status = 0x%.4x\n", word, PCI_CB_SEC_STATUS);
219 PRINT (" primary bus number = 0x%.2x\n", byte, PCI_CB_PRIMARY_BUS);
220 PRINT (" CardBus number = 0x%.2x\n", byte, PCI_CB_CARD_BUS);
221 PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_CB_SUBORDINATE_BUS);
wdenk8bde7f72003-06-27 21:31:46 +0000222 PRINT (" CardBus latency timer = 0x%.2x\n", byte, PCI_CB_LATENCY_TIMER);
wdenk7c7a23b2002-12-07 00:20:59 +0000223 PRINT (" CardBus memory base 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_0);
224 PRINT (" CardBus memory limit 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_0);
225 PRINT (" CardBus memory base 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_1);
226 PRINT (" CardBus memory limit 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_1);
227 PRINT (" CardBus IO base 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0);
228 PRINT (" CardBus IO base high 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0_HI);
229 PRINT (" CardBus IO limit 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0);
230 PRINT (" CardBus IO limit high 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0_HI);
231 PRINT (" CardBus IO base 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1);
232 PRINT (" CardBus IO base high 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1_HI);
233 PRINT (" CardBus IO limit 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1);
234 PRINT (" CardBus IO limit high 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1_HI);
235 PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE);
236 PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN);
237 PRINT (" bridge control = 0x%.4x\n", word, PCI_CB_BRIDGE_CONTROL);
238 PRINT (" subvendor ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_VENDOR_ID);
239 PRINT (" subdevice ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_ID);
240 PRINT (" PC Card 16bit base address = 0x%.8x\n", dword, PCI_CB_LEGACY_MODE_BASE);
241 break;
wdenk8bde7f72003-06-27 21:31:46 +0000242
wdenk7c7a23b2002-12-07 00:20:59 +0000243 default:
244 printf("unknown header\n");
wdenk8bde7f72003-06-27 21:31:46 +0000245 break;
wdenkc6097192002-11-03 00:24:07 +0000246 }
247
248#undef PRINT
249#undef PRINT2
250}
251
252/* Convert the "bus.device.function" identifier into a number.
253 */
254static pci_dev_t get_pci_dev(char* name)
255{
256 char cnum[12];
257 int len, i, iold, n;
258 int bdfs[3] = {0,0,0};
259
260 len = strlen(name);
261 if (len > 8)
262 return -1;
263 for (i = 0, iold = 0, n = 0; i < len; i++) {
264 if (name[i] == '.') {
265 memcpy(cnum, &name[iold], i - iold);
266 cnum[i - iold] = '\0';
267 bdfs[n++] = simple_strtoul(cnum, NULL, 16);
268 iold = i + 1;
269 }
270 }
271 strcpy(cnum, &name[iold]);
272 if (n == 0)
273 n = 1;
274 bdfs[n] = simple_strtoul(cnum, NULL, 16);
275 return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]);
276}
277
278static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length)
279{
280#define DISP_LINE_LEN 16
281 ulong i, nbytes, linebytes;
282 int rc = 0;
283
284 if (length == 0)
285 length = 0x40 / size; /* Standard PCI configuration space */
286
287 /* Print the lines.
288 * once, and all accesses are with the specified bus width.
289 */
290 nbytes = length * size;
291 do {
292 uint val4;
293 ushort val2;
294 u_char val1;
295
296 printf("%08lx:", addr);
297 linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
298 for (i=0; i<linebytes; i+= size) {
299 if (size == 4) {
300 pci_read_config_dword(bdf, addr, &val4);
301 printf(" %08x", val4);
302 } else if (size == 2) {
303 pci_read_config_word(bdf, addr, &val2);
304 printf(" %04x", val2);
305 } else {
306 pci_read_config_byte(bdf, addr, &val1);
307 printf(" %02x", val1);
308 }
309 addr += size;
310 }
311 printf("\n");
312 nbytes -= linebytes;
313 if (ctrlc()) {
314 rc = 1;
315 break;
316 }
317 } while (nbytes > 0);
318
319 return (rc);
320}
321
322static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value)
323{
324 if (size == 4) {
325 pci_write_config_dword(bdf, addr, value);
326 }
327 else if (size == 2) {
328 ushort val = value & 0xffff;
329 pci_write_config_word(bdf, addr, val);
330 }
331 else {
332 u_char val = value & 0xff;
333 pci_write_config_byte(bdf, addr, val);
334 }
335 return 0;
336}
337
338static int
339pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag)
340{
341 ulong i;
342 int nbytes;
wdenkc6097192002-11-03 00:24:07 +0000343 uint val4;
344 ushort val2;
345 u_char val1;
346
347 /* Print the address, followed by value. Then accept input for
348 * the next value. A non-converted value exits.
349 */
350 do {
351 printf("%08lx:", addr);
352 if (size == 4) {
353 pci_read_config_dword(bdf, addr, &val4);
354 printf(" %08x", val4);
355 }
356 else if (size == 2) {
357 pci_read_config_word(bdf, addr, &val2);
358 printf(" %04x", val2);
359 }
360 else {
361 pci_read_config_byte(bdf, addr, &val1);
362 printf(" %02x", val1);
363 }
364
Simon Glasse1bf8242014-04-10 20:01:27 -0600365 nbytes = cli_readline(" ? ");
wdenkc6097192002-11-03 00:24:07 +0000366 if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) {
367 /* <CR> pressed as only input, don't modify current
368 * location and move to next. "-" pressed will go back.
369 */
370 if (incrflag)
371 addr += nbytes ? -size : size;
372 nbytes = 1;
Simon Glassb26440f2014-04-10 20:01:31 -0600373 /* good enough to not time out */
374 bootretry_reset_cmd_timeout();
wdenkc6097192002-11-03 00:24:07 +0000375 }
376#ifdef CONFIG_BOOT_RETRY_TIME
377 else if (nbytes == -2) {
378 break; /* timed out, exit the command */
379 }
380#endif
381 else {
382 char *endp;
383 i = simple_strtoul(console_buffer, &endp, 16);
384 nbytes = endp - console_buffer;
385 if (nbytes) {
wdenkc6097192002-11-03 00:24:07 +0000386 /* good enough to not time out
387 */
Simon Glassb26440f2014-04-10 20:01:31 -0600388 bootretry_reset_cmd_timeout();
wdenkc6097192002-11-03 00:24:07 +0000389 pci_cfg_write (bdf, addr, size, i);
390 if (incrflag)
391 addr += size;
392 }
393 }
394 } while (nbytes);
395
396 return 0;
397}
398
399/* PCI Configuration Space access commands
400 *
401 * Syntax:
402 * pci display[.b, .w, .l] bus.device.function} [addr] [len]
403 * pci next[.b, .w, .l] bus.device.function [addr]
404 * pci modify[.b, .w, .l] bus.device.function [addr]
405 * pci write[.b, .w, .l] bus.device.function addr value
406 */
Kim Phillips088f1b12012-10-29 13:34:31 +0000407static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
wdenkc6097192002-11-03 00:24:07 +0000408{
409 ulong addr = 0, value = 0, size = 0;
410 pci_dev_t bdf = 0;
411 char cmd = 's';
412
413 if (argc > 1)
414 cmd = argv[1][0];
415
416 switch (cmd) {
417 case 'd': /* display */
418 case 'n': /* next */
419 case 'm': /* modify */
420 case 'w': /* write */
421 /* Check for a size specification. */
422 size = cmd_get_data_size(argv[1], 4);
423 if (argc > 3)
424 addr = simple_strtoul(argv[3], NULL, 16);
425 if (argc > 4)
426 value = simple_strtoul(argv[4], NULL, 16);
427 case 'h': /* header */
428 if (argc < 3)
429 goto usage;
430 if ((bdf = get_pci_dev(argv[2])) == -1)
431 return 1;
432 break;
John Schmoller96d61602010-10-22 00:20:23 -0500433#ifdef CONFIG_CMD_PCI_ENUM
434 case 'e':
435 break;
436#endif
wdenkc6097192002-11-03 00:24:07 +0000437 default: /* scan bus */
438 value = 1; /* short listing */
439 bdf = 0; /* bus number */
440 if (argc > 1) {
441 if (argv[argc-1][0] == 'l') {
442 value = 0;
443 argc--;
444 }
445 if (argc > 1)
446 bdf = simple_strtoul(argv[1], NULL, 16);
447 }
448 pciinfo(bdf, value);
449 return 0;
450 }
451
452 switch (argv[1][0]) {
453 case 'h': /* header */
454 pci_header_show(bdf);
455 return 0;
456 case 'd': /* display */
457 return pci_cfg_display(bdf, addr, size, value);
John Schmoller96d61602010-10-22 00:20:23 -0500458#ifdef CONFIG_CMD_PCI_ENUM
459 case 'e':
460 pci_init();
461 return 0;
462#endif
wdenkc6097192002-11-03 00:24:07 +0000463 case 'n': /* next */
464 if (argc < 4)
465 goto usage;
466 return pci_cfg_modify(bdf, addr, size, value, 0);
467 case 'm': /* modify */
468 if (argc < 4)
469 goto usage;
470 return pci_cfg_modify(bdf, addr, size, value, 1);
471 case 'w': /* write */
472 if (argc < 5)
473 goto usage;
474 return pci_cfg_write(bdf, addr, size, value);
475 }
476
477 return 1;
478 usage:
Simon Glass4c12eeb2011-12-10 08:44:01 +0000479 return CMD_RET_USAGE;
wdenkc6097192002-11-03 00:24:07 +0000480}
481
wdenk8bde7f72003-06-27 21:31:46 +0000482/***************************************************/
483
Kim Phillips088f1b12012-10-29 13:34:31 +0000484#ifdef CONFIG_SYS_LONGHELP
485static char pci_help_text[] =
wdenk8bde7f72003-06-27 21:31:46 +0000486 "[bus] [long]\n"
487 " - short or long list of PCI devices on bus 'bus'\n"
John Schmoller96d61602010-10-22 00:20:23 -0500488#ifdef CONFIG_CMD_PCI_ENUM
489 "pci enum\n"
490 " - re-enumerate PCI buses\n"
491#endif
wdenk8bde7f72003-06-27 21:31:46 +0000492 "pci header b.d.f\n"
493 " - show header of PCI device 'bus.device.function'\n"
494 "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n"
495 " - display PCI configuration space (CFG)\n"
496 "pci next[.b, .w, .l] b.d.f address\n"
497 " - modify, read and keep CFG address\n"
498 "pci modify[.b, .w, .l] b.d.f address\n"
499 " - modify, auto increment CFG address\n"
500 "pci write[.b, .w, .l] b.d.f address value\n"
Kim Phillips088f1b12012-10-29 13:34:31 +0000501 " - write to CFG address";
502#endif
503
504U_BOOT_CMD(
505 pci, 5, 1, do_pci,
506 "list and access PCI Configuration Space", pci_help_text
wdenk8bde7f72003-06-27 21:31:46 +0000507);