blob: bc495a90c2e99d9c565c3aa4dc0e5e730ecb514b [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0 */
Stephen Warren89c1e2d2016-06-17 09:43:58 -06002/*
3 * Copyright (c) 2016, NVIDIA CORPORATION.
Stephen Warren89c1e2d2016-06-17 09:43:58 -06004 */
5
6#ifndef _RESET_H
7#define _RESET_H
8
Masahiro Yamada4815db82016-09-21 11:29:01 +09009#include <linux/errno.h>
10
Stephen Warren89c1e2d2016-06-17 09:43:58 -060011/**
12 * A reset is a hardware signal indicating that a HW module (or IP block, or
13 * sometimes an entire off-CPU chip) reset all of its internal state to some
14 * known-good initial state. Drivers will often reset HW modules when they
15 * begin execution to ensure that hardware correctly responds to all requests,
16 * or in response to some error condition. Reset signals are often controlled
17 * externally to the HW module being reset, by an entity this API calls a reset
18 * controller. This API provides a standard means for drivers to request that
19 * reset controllers set or clear reset signals.
20 *
21 * A driver that implements UCLASS_RESET is a reset controller or provider. A
22 * controller will often implement multiple separate reset signals, since the
23 * hardware it manages often has this capability. reset-uclass.h describes the
24 * interface which reset controllers must implement.
25 *
26 * Reset consumers/clients are the HW modules affected by reset signals. This
27 * header file describes the API used by drivers for those HW modules.
28 */
29
30struct udevice;
31
32/**
33 * struct reset_ctl - A handle to (allowing control of) a single reset signal.
34 *
35 * Clients provide storage for reset control handles. The content of the
36 * structure is managed solely by the reset API and reset drivers. A reset
37 * control struct is initialized by "get"ing the reset control struct. The
38 * reset control struct is passed to all other reset APIs to identify which
39 * reset signal to operate upon.
40 *
41 * @dev: The device which implements the reset signal.
42 * @id: The reset signal ID within the provider.
Andreas Dannenbergc72f9b72018-08-27 15:57:40 +053043 * @data: An optional data field for scenarios where a single integer ID is not
44 * sufficient. If used, it can be populated through an .of_xlate op and
45 * processed during the various reset ops.
Stephen Warren89c1e2d2016-06-17 09:43:58 -060046 *
Andreas Dannenbergc72f9b72018-08-27 15:57:40 +053047 * Should additional information to identify and configure any reset signal
48 * for any provider be required in the future, the struct could be expanded to
Stephen Warren89c1e2d2016-06-17 09:43:58 -060049 * either (a) add more fields to allow reset providers to store additional
50 * information, or (b) replace the id field with an opaque pointer, which the
51 * provider would dynamically allocated during its .of_xlate op, and process
52 * during is .request op. This may require the addition of an extra op to clean
53 * up the allocation.
54 */
55struct reset_ctl {
56 struct udevice *dev;
57 /*
Andreas Dannenbergc72f9b72018-08-27 15:57:40 +053058 * Written by of_xlate. In the future, we might add more fields here.
Stephen Warren89c1e2d2016-06-17 09:43:58 -060059 */
60 unsigned long id;
Andreas Dannenbergc72f9b72018-08-27 15:57:40 +053061 unsigned long data;
Stephen Warren89c1e2d2016-06-17 09:43:58 -060062};
63
Neil Armstrong0c282332018-04-03 11:40:50 +020064/**
65 * struct reset_ctl_bulk - A handle to (allowing control of) a bulk of reset
66 * signals.
67 *
68 * Clients provide storage for the reset control bulk. The content of the
69 * structure is managed solely by the reset API. A reset control bulk struct is
70 * initialized by "get"ing the reset control bulk struct.
71 * The reset control bulk struct is passed to all other bulk reset APIs to apply
72 * the API to all the reset signals in the bulk struct.
73 *
74 * @resets: An array of reset signal handles handles.
75 * @count: The number of reset signal handles in the reset array.
76 */
77struct reset_ctl_bulk {
78 struct reset_ctl *resets;
79 unsigned int count;
80};
81
Ley Foon Tand99894d2018-06-14 18:45:20 +080082#if CONFIG_IS_ENABLED(DM_RESET)
Stephen Warren89c1e2d2016-06-17 09:43:58 -060083/**
84 * reset_get_by_index - Get/request a reset signal by integer index.
85 *
86 * This looks up and requests a reset signal. The index is relative to the
87 * client device; each device is assumed to have n reset signals associated
88 * with it somehow, and this function finds and requests one of them. The
89 * mapping of client device reset signal indices to provider reset signals may
90 * be via device-tree properties, board-provided mapping tables, or some other
91 * mechanism.
92 *
93 * @dev: The client device.
94 * @index: The index of the reset signal to request, within the client's
95 * list of reset signals.
96 * @reset_ctl A pointer to a reset control struct to initialize.
97 * @return 0 if OK, or a negative error code.
98 */
99int reset_get_by_index(struct udevice *dev, int index,
100 struct reset_ctl *reset_ctl);
101
102/**
Neil Armstrong0c282332018-04-03 11:40:50 +0200103 * reset_get_bulk - Get/request all reset signals of a device.
104 *
105 * This looks up and requests all reset signals of the client device; each
106 * device is assumed to have n reset signals associated with it somehow,
107 * and this function finds and requests all of them in a separate structure.
108 * The mapping of client device reset signals indices to provider reset signals
109 * may be via device-tree properties, board-provided mapping tables, or some
110 * other mechanism.
111 *
112 * @dev: The client device.
113 * @bulk A pointer to a reset control bulk struct to initialize.
114 * @return 0 if OK, or a negative error code.
115 */
116int reset_get_bulk(struct udevice *dev, struct reset_ctl_bulk *bulk);
117
118/**
Stephen Warren89c1e2d2016-06-17 09:43:58 -0600119 * reset_get_by_name - Get/request a reset signal by name.
120 *
121 * This looks up and requests a reset signal. The name is relative to the
122 * client device; each device is assumed to have n reset signals associated
123 * with it somehow, and this function finds and requests one of them. The
124 * mapping of client device reset signal names to provider reset signal may be
125 * via device-tree properties, board-provided mapping tables, or some other
126 * mechanism.
127 *
128 * @dev: The client device.
129 * @name: The name of the reset signal to request, within the client's
130 * list of reset signals.
131 * @reset_ctl: A pointer to a reset control struct to initialize.
132 * @return 0 if OK, or a negative error code.
133 */
134int reset_get_by_name(struct udevice *dev, const char *name,
135 struct reset_ctl *reset_ctl);
136
137/**
Patrice Chotard9bd5cdf2017-07-18 11:57:05 +0200138 * reset_request - Request a reset signal.
139 *
140 * @reset_ctl: A reset control struct.
141 *
142 * @return 0 if OK, or a negative error code.
143 */
144int reset_request(struct reset_ctl *reset_ctl);
145
146/**
Stephen Warren89c1e2d2016-06-17 09:43:58 -0600147 * reset_free - Free a previously requested reset signal.
148 *
149 * @reset_ctl: A reset control struct that was previously successfully
150 * requested by reset_get_by_*().
151 * @return 0 if OK, or a negative error code.
152 */
153int reset_free(struct reset_ctl *reset_ctl);
154
155/**
156 * reset_assert - Assert a reset signal.
157 *
158 * This function will assert the specified reset signal, thus resetting the
159 * affected HW module(s). Depending on the reset controller hardware, the reset
160 * signal will either stay asserted until reset_deassert() is called, or the
161 * hardware may autonomously clear the reset signal itself.
162 *
163 * @reset_ctl: A reset control struct that was previously successfully
164 * requested by reset_get_by_*().
165 * @return 0 if OK, or a negative error code.
166 */
167int reset_assert(struct reset_ctl *reset_ctl);
168
169/**
Neil Armstrong0c282332018-04-03 11:40:50 +0200170 * reset_assert_bulk - Assert all reset signals in a reset control bulk struct.
171 *
172 * This function will assert the specified reset signals in a reset control
173 * bulk struct, thus resetting the affected HW module(s). Depending on the
174 * reset controller hardware, the reset signals will either stay asserted
175 * until reset_deassert_bulk() is called, or the hardware may autonomously
176 * clear the reset signals itself.
177 *
178 * @bulk: A reset control bulk struct that was previously successfully
179 * requested by reset_get_bulk().
180 * @return 0 if OK, or a negative error code.
181 */
182int reset_assert_bulk(struct reset_ctl_bulk *bulk);
183
184/**
Stephen Warren89c1e2d2016-06-17 09:43:58 -0600185 * reset_deassert - Deassert a reset signal.
186 *
187 * This function will deassert the specified reset signal, thus releasing the
188 * affected HW modules() from reset, and allowing them to continue normal
189 * operation.
190 *
191 * @reset_ctl: A reset control struct that was previously successfully
192 * requested by reset_get_by_*().
193 * @return 0 if OK, or a negative error code.
194 */
195int reset_deassert(struct reset_ctl *reset_ctl);
196
Patrice Chotard3b9d1bd2017-07-18 11:57:06 +0200197/**
Neil Armstrong0c282332018-04-03 11:40:50 +0200198 * reset_deassert_bulk - Deassert all reset signals in a reset control bulk
199 * struct.
200 *
201 * This function will deassert the specified reset signals in a reset control
202 * bulk struct, thus releasing the affected HW modules() from reset, and
203 * allowing them to continue normal operation.
204 *
205 * @bulk: A reset control bulk struct that was previously successfully
206 * requested by reset_get_bulk().
207 * @return 0 if OK, or a negative error code.
208 */
209int reset_deassert_bulk(struct reset_ctl_bulk *bulk);
210
211/**
Andreas Dannenberge7012e62018-08-27 15:57:39 +0530212 * rst_status - Check reset signal status.
213 *
214 * @reset_ctl: The reset signal to check.
215 * @return 0 if deasserted, positive if asserted, or a negative
216 * error code.
217 */
218int reset_status(struct reset_ctl *reset_ctl);
219
220/**
Patrice Chotard3b9d1bd2017-07-18 11:57:06 +0200221 * reset_release_all - Assert/Free an array of previously requested resets.
222 *
223 * For each reset contained in the reset array, this function will check if
224 * reset has been previously requested and then will assert and free it.
225 *
226 * @reset_ctl: A reset struct array that was previously successfully
227 * requested by reset_get_by_*().
228 * @count Number of reset contained in the array
229 * @return 0 if OK, or a negative error code.
230 */
231int reset_release_all(struct reset_ctl *reset_ctl, int count);
Neil Armstrong0c282332018-04-03 11:40:50 +0200232
233/**
234 * reset_release_bulk - Assert/Free an array of previously requested reset
235 * signals in a reset control bulk struct.
236 *
237 * For each reset contained in the reset control bulk struct, this function
238 * will check if reset has been previously requested and then will assert
239 * and free it.
240 *
241 * @bulk: A reset control bulk struct that was previously successfully
242 * requested by reset_get_bulk().
243 * @return 0 if OK, or a negative error code.
244 */
245static inline int reset_release_bulk(struct reset_ctl_bulk *bulk)
246{
247 return reset_release_all(bulk->resets, bulk->count);
248}
Masahiro Yamada4815db82016-09-21 11:29:01 +0900249#else
250static inline int reset_get_by_index(struct udevice *dev, int index,
251 struct reset_ctl *reset_ctl)
252{
253 return -ENOTSUPP;
254}
255
Neil Armstrong1dd181f2018-04-12 10:03:19 +0200256static inline int reset_get_bulk(struct udevice *dev,
257 struct reset_ctl_bulk *bulk)
Neil Armstrong0c282332018-04-03 11:40:50 +0200258{
259 return -ENOTSUPP;
260}
261
Masahiro Yamada4815db82016-09-21 11:29:01 +0900262static inline int reset_get_by_name(struct udevice *dev, const char *name,
263 struct reset_ctl *reset_ctl)
264{
265 return -ENOTSUPP;
266}
267
268static inline int reset_free(struct reset_ctl *reset_ctl)
269{
270 return 0;
271}
272
273static inline int reset_assert(struct reset_ctl *reset_ctl)
274{
275 return 0;
276}
277
Neil Armstrong0c282332018-04-03 11:40:50 +0200278static inline int reset_assert_bulk(struct reset_ctl_bulk *bulk)
279{
280 return 0;
281}
282
Masahiro Yamada4815db82016-09-21 11:29:01 +0900283static inline int reset_deassert(struct reset_ctl *reset_ctl)
284{
285 return 0;
286}
Patrice Chotard3b9d1bd2017-07-18 11:57:06 +0200287
Neil Armstrong0c282332018-04-03 11:40:50 +0200288static inline int reset_deassert_bulk(struct reset_ctl_bulk *bulk)
289{
290 return 0;
291}
292
Andreas Dannenberge7012e62018-08-27 15:57:39 +0530293static inline int reset_status(struct reset_ctl *reset_ctl)
294{
295 return -ENOTSUPP;
296}
297
Patrice Chotard3b9d1bd2017-07-18 11:57:06 +0200298static inline int reset_release_all(struct reset_ctl *reset_ctl, int count)
299{
300 return 0;
301}
302
Neil Armstrong1dd181f2018-04-12 10:03:19 +0200303static inline int reset_release_bulk(struct reset_ctl_bulk *bulk)
Neil Armstrong0c282332018-04-03 11:40:50 +0200304{
305 return 0;
306}
Masahiro Yamada4815db82016-09-21 11:29:01 +0900307#endif
308
Stephen Warren89c1e2d2016-06-17 09:43:58 -0600309#endif