blob: eb63cb0c852f9d11ea8316004c6cdb09d1b41668 [file] [log] [blame]
Anatolij Gustschin4387cf12012-08-31 01:29:57 +00001/*
2 * (C) Copyright 2012
3 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
Anatolij Gustschin4387cf12012-08-31 01:29:57 +00006 */
7
8/*
9 * Valid values for CONFIG_SYS_TEXT_BASE are:
10 * 0xFF000000 boot low boot high (standard configuration)
11 * 0x00100000 boot from RAM (for testing only)
12 */
13#ifndef CONFIG_SYS_TEXT_BASE
14#define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */
15#endif
16
17/* Board specific flash config */
18#define CONFIG_SYS_FLASH_BASE 0xff000000
19#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */
20/* max number of sectors on one chip */
21#define CONFIG_SYS_MAX_FLASH_SECT 128
22
23/*
24 * Include common defines for all ifm boards
25 */
26#include "o2dnt-common.h"
27
28/* GPIO configuration */
29#define CONFIG_SYS_GPS_PORT_CONFIG 0x00002004 /* no CAN */
30
31/* Other board specific configs */
32#define CONFIG_NETCONSOLE
33
34#define CONFIG_SYS_BOOTCS_CFG 0x00087801
35#define CONFIG_SYS_RESET_ADDRESS 0xff000000
36
37#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
38#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */
39
40#define CONFIG_BOARD_NAME "o2mnt"
41#define CONFIG_BOARD_BOOTCMD "${newcmd}"
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +020042#define CONFIG_BOARD_MEM_LIMIT __stringify(62)
43#define BOARD_POST_CRC32_END __stringify(0x01000000)
Anatolij Gustschin4387cf12012-08-31 01:29:57 +000044
45#ifndef CONFIG_IFM_SENSOR_TYPE
46#define CONFIG_IFM_SENSOR_TYPE "O2M110"
47#endif
48
49#define CONFIG_EXTRA_ENV_SETTINGS \
50 CONFIG_IFM_DEFAULT_ENV_SETTINGS \
51 CONFIG_IFM_DEFAULT_ENV_OLD \
52 CONFIG_IFM_DEFAULT_ENV_NEW \
53 "linbot=ff060000\0" \
54 "lintop=ff25ffff\0" \
55 "rambot=ff260000\0" \
56 "ramtop=ffc5ffff\0" \
57 "jffbot=ffc60000\0" \
58 "jfftop=ffffffff\0" \
Anatolij Gustschin4a8c3f62014-10-24 20:13:51 +020059 "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
Anatolij Gustschin4387cf12012-08-31 01:29:57 +000060 "ubotop=ff03ffff\0" \
61 "kernel_addr=0xff060000\0" \
62 "ramdisk_addr=0xff260000\0" \
63 "newcmd=run scrprot;run flash_ext2\0" \
64 "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} " \
65 "${ramtop}\0" \
66 "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0" \
67 "ext2args=setenv bootargs root=/dev/mtdblock3 ro " \
68 "rootfstype=ext2\0" \
69 "pwm=mw f0000674 0x10006;mw f0000678 0x30000;" \
70 "mw f0000678 0x30001;mw f0000670 0x3\0" \
71 "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);" \
72 "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0" \
73 "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0" \
74 "srelease=0.00\0"