blob: ead67453b93914e73f33db7c61b815916491c6fb [file] [log] [blame]
Wolfgang Denk6bdf4302005-08-15 15:55:00 +02001/*
2 * (C) Copyright 2000-2004
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
Wolfgang Denk6bdf4302005-08-15 15:55:00 +02006 */
7
8/*
9 * Dan Malek, Embedded Edge, LLC, dan@embeddededge.com
10 * U-Boot port on STx XTc 8xx board
11 * Mostly copied from Panto's NETTA2 board.
12 */
13
14#ifndef __CONFIG_H
15#define __CONFIG_H
16
17/*
18 * High Level Configuration Options
19 * (easy to change)
20 */
21
22#define CONFIG_MPC875 1 /* This is a MPC875 CPU */
23#define CONFIG_STXXTC 1 /* ...on a STx XTc board */
24
Wolfgang Denk2ae18242010-10-06 09:05:45 +020025#define CONFIG_SYS_TEXT_BASE 0x40F00000
26
Wolfgang Denk6bdf4302005-08-15 15:55:00 +020027#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
28#undef CONFIG_8xx_CONS_SMC2
29#undef CONFIG_8xx_CONS_NONE
30
Wolfgang Denk670d9f12005-09-13 00:12:33 +020031#define CONFIG_BAUDRATE 115200 /* console baudrate = 115.2kbps */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +020032
33#define CONFIG_XIN 10000000 /* 10 MHz input xtal */
34
35/* Select one of few clock rates defined later in this file.
36*/
37/* #define MPC8XX_HZ 50000000 */
38#define MPC8XX_HZ 66666666
39
40#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
41
42#if 0
43#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
44#else
45#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
46#endif
47
48#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */
49
50#undef CONFIG_BOOTARGS
51#define CONFIG_BOOTCOMMAND \
Wolfgang Denk53677ef2008-05-20 16:00:29 +020052 "tftpboot; " \
53 "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
54 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +020055 "bootm"
56
Wolfgang Denk74de7ae2009-04-01 23:34:12 +020057#define CONFIG_SOURCE
Wolfgang Denk6bdf4302005-08-15 15:55:00 +020058#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020059#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +020060
61#undef CONFIG_WATCHDOG /* watchdog disabled */
62
63#define CONFIG_STATUS_LED 1 /* Status LED enabled */
64#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
65
Jon Loeligerd3b8c1a2007-07-09 21:57:31 -050066/*
67 * BOOTP options
68 */
69#define CONFIG_BOOTP_SUBNETMASK
70#define CONFIG_BOOTP_GATEWAY
71#define CONFIG_BOOTP_HOSTNAME
72#define CONFIG_BOOTP_BOOTPATH
73#define CONFIG_BOOTP_BOOTFILESIZE
74#define CONFIG_BOOTP_NISDOMAIN
75
Wolfgang Denk6bdf4302005-08-15 15:55:00 +020076
77#undef CONFIG_MAC_PARTITION
78#undef CONFIG_DOS_PARTITION
79
80#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
81
Wolfgang Denk6bdf4302005-08-15 15:55:00 +020082#define FEC_ENET 1 /* eth.c needs it that way... */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020083#undef CONFIG_SYS_DISCOVER_PHY
Wolfgang Denk6bdf4302005-08-15 15:55:00 +020084#define CONFIG_MII 1
TsiChung Liew0f3ba7e2008-03-30 01:22:13 -050085#define CONFIG_MII_INIT 1
Wolfgang Denk6bdf4302005-08-15 15:55:00 +020086#undef CONFIG_RMII
87
88#define CONFIG_ETHER_ON_FEC1 1
Wolfgang Denk53677ef2008-05-20 16:00:29 +020089#define CONFIG_FEC1_PHY 1 /* phy address of FEC */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +020090#undef CONFIG_FEC1_PHY_NORXERR
91
92#define CONFIG_ETHER_ON_FEC2 1
93#define CONFIG_FEC2_PHY 3
94#undef CONFIG_FEC2_PHY_NORXERR
95
96#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
97
Jon Loeligeref0df522007-07-04 22:31:07 -050098
99/*
100 * Command line configuration.
101 */
102#include <config_cmd_default.h>
103
104#define CONFIG_CMD_DHCP
105#define CONFIG_CMD_MII
Jon Loeligeref0df522007-07-04 22:31:07 -0500106#define CONFIG_CMD_NFS
107#define CONFIG_CMD_PING
108
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200109
110#define CONFIG_BOARD_EARLY_INIT_F 1
111#define CONFIG_MISC_INIT_R
112
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200113/*
114 * Miscellaneous configurable options
115 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200116#define CONFIG_SYS_LONGHELP /* undef to save memory */
117#define CONFIG_SYS_PROMPT "xtc> " /* Monitor Command Prompt */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200118
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200119#define CONFIG_SYS_HUSH_PARSER 1
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200120
Jon Loeligeref0df522007-07-04 22:31:07 -0500121#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200122#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200123#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200124#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200125#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200126#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
127#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
128#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200129
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200130#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */
131#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200132
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200133#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200134
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200135#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200136
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200137/*
138 * Low Level Configuration Settings
139 * (address mappings, register initial values, etc.)
140 * You should know what you are doing if you make changes here.
141 */
142/*-----------------------------------------------------------------------
143 * Internal Memory Mapped Register
144 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200145#define CONFIG_SYS_IMMR 0xFF000000
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200146
147/*-----------------------------------------------------------------------
148 * Definitions for initial stack pointer and data area (in DPRAM)
149 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200150#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
Wolfgang Denk553f0982010-10-26 13:32:32 +0200151#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200152#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200153#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200154
155/*-----------------------------------------------------------------------
156 * Start addresses for the final memory configuration
157 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200158 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200159 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200160#define CONFIG_SYS_SDRAM_BASE 0x00000000
161#define CONFIG_SYS_FLASH_BASE 0x40000000
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200162#if defined(DEBUG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200163#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200164#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200165#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200166#endif
167
168/* yes this is weird, I know :) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200169#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE | 0x00F00000)
170#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200171
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200172#define CONFIG_SYS_RESET_ADDRESS 0x80000000
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200173
174/*
175 * For booting Linux, the board info and command line data
176 * have to be in the first 8 MB of memory, since this is
177 * the maximum mapped by the Linux kernel during initialization.
178 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200179#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200180
181/*-----------------------------------------------------------------------
182 * FLASH organization
183 */
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200184#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200185#define CONFIG_ENV_SECT_SIZE 0x10000
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200186
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200187#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00000000)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200188#define CONFIG_ENV_OFFSET 0
189#define CONFIG_ENV_SIZE 0x4000
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200190
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200191#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x00010000)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200192#define CONFIG_ENV_OFFSET_REDUND 0
193#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200194
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200195#define CONFIG_SYS_FLASH_CFI 1
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200196#define CONFIG_FLASH_CFI_DRIVER 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200197#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
198#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
199#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200200
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200201#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x2000000 }
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200202
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200203#define CONFIG_SYS_FLASH_PROTECTION
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200204
205/*-----------------------------------------------------------------------
206 * Cache Configuration
207 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200208#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeligeref0df522007-07-04 22:31:07 -0500209#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200210#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200211#endif
212
213/*-----------------------------------------------------------------------
214 * SYPCR - System Protection Control 11-9
215 * SYPCR can only be written once after reset!
216 *-----------------------------------------------------------------------
217 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
218 */
219#if defined(CONFIG_WATCHDOG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200220#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200221 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
222#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200223#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200224#endif
225
226/*-----------------------------------------------------------------------
227 * SIUMCR - SIU Module Configuration 11-6
228 *-----------------------------------------------------------------------
229 * PCMCIA config., multi-function pin tri-state
230 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200231#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC | SIUMCR_GB5E)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200232
233/*-----------------------------------------------------------------------
234 * TBSCR - Time Base Status and Control 11-26
235 *-----------------------------------------------------------------------
236 * Clear Reference Interrupt Status, Timebase freezing enabled
237 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200239
240/*-----------------------------------------------------------------------
241 * RTCSC - Real-Time Clock Status and Control Register 11-27
242 *-----------------------------------------------------------------------
243 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200244#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200245
246/*-----------------------------------------------------------------------
247 * PISCR - Periodic Interrupt Status and Control 11-31
248 *-----------------------------------------------------------------------
249 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
250 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200251#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200252
253/*-----------------------------------------------------------------------
254 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
255 *-----------------------------------------------------------------------
256 * Reset PLL lock status sticky bit, timer expired status bit and timer
257 * interrupt status bit
258 *
259 */
260
261#if CONFIG_XIN == 10000000
262
263#if MPC8XX_HZ == 50000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200264#define CONFIG_SYS_PLPRCR ((0 << PLPRCR_MFN_SHIFT) | (0 << PLPRCR_MFD_SHIFT) | \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200265 (1 << PLPRCR_S_SHIFT) | (10 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200266 PLPRCR_TEXPS)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200267#elif MPC8XX_HZ == 66666666
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200268#define CONFIG_SYS_PLPRCR ((1 << PLPRCR_MFN_SHIFT) | (2 << PLPRCR_MFD_SHIFT) | \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200269 (1 << PLPRCR_S_SHIFT) | (13 << PLPRCR_MFI_SHIFT) | (0 << PLPRCR_PDF_SHIFT) | \
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200270 PLPRCR_TEXPS)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200271#else
272#error unsupported CPU freq for XIN = 10MHz
273#endif
274#else
275#error unsupported freq for XIN (must be 10MHz)
276#endif
277
278
279/*
280 *-----------------------------------------------------------------------
281 * SCCR - System Clock and reset Control Register 15-27
282 *-----------------------------------------------------------------------
283 * Set clock output, timebase and RTC source and divider,
284 * power management and some other internal clocks
285 *
286 * Note: When TBS == 0 the timebase is independent of current cpu clock.
287 */
288
289#define SCCR_MASK SCCR_EBDF11
290#if MPC8XX_HZ > 66666666
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200291#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200292 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
293 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
294 SCCR_DFALCD00 | SCCR_EBDF01)
295#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200296#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ SCCR_CRQEN | \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200297 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
298 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
299 SCCR_DFALCD00)
300#endif
301
302/*-----------------------------------------------------------------------
303 *
304 *-----------------------------------------------------------------------
305 *
306 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200307/*#define CONFIG_SYS_DER 0x2002000F*/
308#define CONFIG_SYS_DER 0
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200309
310/*
311 * Init Memory Controller:
312 *
313 * BR0/1 and OR0/1 (FLASH)
314 */
315
316#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
317#define FLASH_BASE1_PRELIM 0x42000000 /* FLASH bank #1 */
318
319/* used to re-map FLASH both when starting from SRAM or FLASH:
320 * restrict access enough to keep SRAM working (if any)
321 * but not too much to meddle with FLASH accesses
322 */
323
324#define FLASH_BANK_MAX_SIZE 0x01000000 /* max size per chip */
325
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200326#define CONFIG_SYS_REMAP_OR_AM 0x80000000
327#define CONFIG_SYS_PRELIM_OR_AM (0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1))
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200328
329/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200330#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200331
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200332#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
333#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
334#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200335
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200336#define CONFIG_SYS_OR1_PRELIM ((0xFFFFFFFFLU & ~(FLASH_BANK_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_FLASH)
337#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200338
339/*
340 * BR4 and OR4 (SDRAM)
341 *
342 */
343#define SDRAM_BASE1_PRELIM 0x00000000 /* SDRAM bank #0 */
344#define SDRAM_MAX_SIZE (256 << 20) /* max 256MB per bank */
345
346/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200347#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200348
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200349#define CONFIG_SYS_OR4_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM)
350#define CONFIG_SYS_BR4_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200351
352/*
353 * Memory Periodic Timer Prescaler
354 */
355
356/*
357 * Memory Periodic Timer Prescaler
358 *
359 * The Divider for PTA (refresh timer) configuration is based on an
360 * example SDRAM configuration (64 MBit, one bank). The adjustment to
361 * the number of chip selects (NCS) and the actually needed refresh
362 * rate is done by setting MPTPR.
363 *
364 * PTA is calculated from
365 * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
366 *
367 * gclk CPU clock (not bus clock!)
368 * Trefresh Refresh cycle * 4 (four word bursts used)
369 *
370 * 4096 Rows from SDRAM example configuration
371 * 1000 factor s -> ms
372 * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
373 * 4 Number of refresh cycles per period
374 * 64 Refresh cycle in ms per number of rows
375 * --------------------------------------------
376 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
377 *
378 * 50 MHz => 50.000.000 / Divider = 98
379 * 66 Mhz => 66.000.000 / Divider = 129
380 * 80 Mhz => 80.000.000 / Divider = 156
381 */
382
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200383#define CONFIG_SYS_MAMR_PTA 234
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200384
385/*
386 * For 16 MBit, refresh rates could be 31.3 us
387 * (= 64 ms / 2K = 125 / quad bursts).
388 * For a simpler initialization, 15.6 us is used instead.
389 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200390 * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
391 * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200392 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200393#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
394#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200395
396/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200397#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
398#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200399
400/*
401 * MAMR settings for SDRAM
402 */
403
404/* 8 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200405#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200406 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
407 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
408
409/* 9 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200410#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200411 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
412 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
413
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200414#define CONFIG_LAST_STAGE_INIT /* needed to reset the damn phys */
415
416/****************************************************************/
417
418#define NAND_SIZE 0x00010000 /* 64K */
419#define NAND_BASE 0xF1000000
420
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200421/*****************************************************************************/
422
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200423#define CONFIG_SYS_DIRECT_FLASH_TFTP
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200424
425/*****************************************************************************/
426
427/* Status Leds are on the MODCK pins, which become the PCMCIA PGCRB,
428 * CxOE and CxRESET. We use the CxOE.
429 */
430#define STATUS_LED_BIT 0x00000080 /* bit 24 */
431
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200432#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200433#define STATUS_LED_STATE STATUS_LED_BLINKING
434
435#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */
436#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */
437
438#ifndef __ASSEMBLY__
439
440/* LEDs */
441
442/* led_id_t is unsigned int mask */
443typedef unsigned int led_id_t;
444
445#define __led_toggle(_msk) \
446 do { \
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200447 ((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb ^= (_msk); \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200448 } while(0)
449
450#define __led_set(_msk, _st) \
451 do { \
452 if ((_st)) \
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200453 ((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb |= (_msk); \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200454 else \
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200455 ((volatile immap_t *)CONFIG_SYS_IMMR)->im_pcmcia.pcmc_pgcrb &= ~(_msk); \
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200456 } while(0)
457
458#define __led_init(msk, st) __led_set(msk, st)
459
460#endif
461
462/******************************************************************************/
463
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200464#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
465#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
466#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200467
468/******************************************************************************/
469
470/* use board specific hardware */
471#undef CONFIG_WATCHDOG /* watchdog disabled */
472#define CONFIG_HW_WATCHDOG
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200473
474/*****************************************************************************/
475
476#define CONFIG_AUTO_COMPLETE 1
477#define CONFIG_CRC32_VERIFY 1
478#define CONFIG_HUSH_OLD_PARSER_COMPATIBLE 1
479
Wolfgang Denk070610c2005-10-13 01:49:09 +0200480/*****************************************************************************/
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200481
Gerald Van Baren62bcdda2008-06-03 20:26:29 -0400482/* pass open firmware flattened device tree */
483#define CONFIG_OF_LIBFDT 1
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200484
Wolfgang Denk070610c2005-10-13 01:49:09 +0200485#define OF_TBCLK (MPC8XX_HZ / 16)
Wolfgang Denk6bdf4302005-08-15 15:55:00 +0200486
487#endif /* __CONFIG_H */