blob: 721af71d44ca659539c3537fd47248f446db9ca0 [file] [log] [blame]
Suriyan Ramasami6c016482014-11-17 14:39:39 -08001#!/bin/bash
Tom Rinif739fcd2018-05-07 17:02:21 -04002# SPDX-License-Identifier: GPL-2.0+
Suriyan Ramasami6c016482014-11-17 14:39:39 -08003#
4# (C) Copyright 2014 Suriyan Ramasami
Suriyan Ramasami6c016482014-11-17 14:39:39 -08005
6# Invoke this test script from U-Boot base directory as ./test/fs/fs-test.sh
7# It currently tests the fs/sb and native commands for ext4 and fat partitions
8# Expected results are as follows:
9# EXT4 tests:
AKASHI Takahiro9461fcc2018-09-11 15:59:18 +090010# fs-test.sb.ext4 Summary: PASS: 24 FAIL: 0
11# fs-test.nonfs.ext4 Summary: PASS: 24 FAIL: 0
12# fs-test.fs.ext4 Summary: PASS: 24 FAIL: 0
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +030013# FAT16 tests:
AKASHI Takahiro9461fcc2018-09-11 15:59:18 +090014# fs-test.sb.fat16 Summary: PASS: 24 FAIL: 0
15# fs-test.nonfs.fat16 Summary: PASS: 24 FAIL: 0
16# fs-test.fs.fat16 Summary: PASS: 24 FAIL: 0
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +030017# FAT32 tests:
AKASHI Takahiro9461fcc2018-09-11 15:59:18 +090018# fs-test.sb.fat32 Summary: PASS: 24 FAIL: 0
19# fs-test.nonfs.fat32 Summary: PASS: 24 FAIL: 0
20# fs-test.fs.fat32 Summary: PASS: 24 FAIL: 0
21# --------------------------------------------
22# Total Summary: TOTAL PASS: 216 TOTAL FAIL: 0
23# --------------------------------------------
Suriyan Ramasami6c016482014-11-17 14:39:39 -080024
25# pre-requisite binaries list.
26PREREQ_BINS="md5sum mkfs mount umount dd fallocate mkdir"
27
28# All generated output files from this test will be in $OUT_DIR
29# Hence everything is sandboxed.
30OUT_DIR="sandbox/test/fs"
31
32# Location of generated sandbox u-boot
33UBOOT="./sandbox/u-boot"
34
35# Our mount directory will be in the sandbox
36MOUNT_DIR="${OUT_DIR}/mnt"
37
38# The file system image we create will have the $IMG prefix.
39IMG="${OUT_DIR}/3GB"
40
41# $SMALL_FILE is the name of the 1MB file in the file system image
42SMALL_FILE="1MB.file"
43
44# $BIG_FILE is the name of the 2.5GB file in the file system image
45BIG_FILE="2.5GB.file"
46
47# $MD5_FILE will have the expected md5s when we do the test
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +030048# They shall have a suffix which represents their file system (ext4/fat16/...)
Suriyan Ramasami6c016482014-11-17 14:39:39 -080049MD5_FILE="${OUT_DIR}/md5s.list"
50
51# $OUT shall be the prefix of the test output. Their suffix will be .out
52OUT="${OUT_DIR}/fs-test"
53
54# Full Path of the 1 MB file that shall be created in the fs image.
55MB1="${MOUNT_DIR}/${SMALL_FILE}"
56GB2p5="${MOUNT_DIR}/${BIG_FILE}"
57
58# ************************
59# * Functions start here *
60# ************************
61
62# Check if the prereq binaries exist, or exit
63function check_prereq() {
64 for prereq in $PREREQ_BINS; do
Stephen Warren47b71642015-10-03 13:56:48 -060065 if [ ! -x "`which $prereq`" ]; then
Suriyan Ramasami6c016482014-11-17 14:39:39 -080066 echo "Missing $prereq binary. Exiting!"
67 exit
68 fi
69 done
70
71 # We use /dev/urandom to create files. Check if it exists.
72 if [ ! -c /dev/urandom ]; then
73 echo "Missing character special /dev/urandom. Exiting!"
74 exit
75 fi
76}
77
78# If 1st param is "clean", then clean out the generated files and exit
79function check_clean() {
80 if [ "$1" = "clean" ]; then
81 rm -rf "$OUT_DIR"
82 echo "Cleaned up generated files. Exiting"
83 exit
84 fi
85}
86
87# Generate sandbox U-Boot - gleaned from /test/dm/test-dm.sh
88function compile_sandbox() {
89 unset CROSS_COMPILE
90 NUM_CPUS=$(cat /proc/cpuinfo |grep -c processor)
91 make O=sandbox sandbox_config
92 make O=sandbox -s -j${NUM_CPUS}
93
94 # Check if U-Boot exists
95 if [ ! -x "$UBOOT" ]; then
96 echo "$UBOOT does not exist or is not executable"
97 echo "Build error?"
98 echo "Please run this script as ./test/fs/`basename $0`"
99 exit
100 fi
101}
102
103# Clean out all generated files other than the file system images
104# We save time by not deleting and recreating the file system images
105function prepare_env() {
106 rm -f ${MD5_FILE}.* ${OUT}.*
Stephen Warren08eee272015-12-14 15:01:15 -0700107 mkdir -p ${OUT_DIR}
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800108}
109
110# 1st parameter is the name of the image file to be created
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +0300111# 2nd parameter is the filesystem - fat16 ext4 etc
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800112# -F cant be used with fat as it means something else.
113function create_image() {
114 # Create image if not already present - saves time, while debugging
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +0300115 case "$2" in
116 fat16)
117 MKFS_OPTION="-F 16"
118 FS_TYPE="fat"
119 ;;
120 fat32)
121 MKFS_OPTION="-F 32"
122 FS_TYPE="fat"
123 ;;
124 ext4)
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800125 MKFS_OPTION="-F"
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +0300126 FS_TYPE="ext4"
127 ;;
128 esac
129
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800130 if [ ! -f "$1" ]; then
131 fallocate -l 3G "$1" &> /dev/null
Stephen Warren08eee272015-12-14 15:01:15 -0700132 if [ $? -ne 0 ]; then
133 echo fallocate failed - using dd instead
134 dd if=/dev/zero of=$1 bs=1024 count=$((3 * 1024 * 1024))
135 if [ $? -ne 0 ]; then
136 echo Could not create empty disk image
137 exit $?
138 fi
139 fi
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +0300140 mkfs -t "$FS_TYPE" $MKFS_OPTION "$1" &> /dev/null
141 if [ $? -ne 0 -a "$FS_TYPE" = "fat" ]; then
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800142 # If we fail and we did fat, try vfat.
143 mkfs -t vfat $MKFS_OPTION "$1" &> /dev/null
144 fi
Stephen Warren08eee272015-12-14 15:01:15 -0700145 if [ $? -ne 0 ]; then
146 echo Could not create filesystem
147 exit $?
148 fi
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800149 fi
150}
151
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800152# 1st parameter is image file
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +0300153# 2nd parameter is file system type - fat16/ext4/...
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800154# 3rd parameter is name of small file
155# 4th parameter is name of big file
156# 5th parameter is fs/nonfs/sb - to dictate generic fs commands or
157# otherwise or sb hostfs
158# 6th parameter is the directory path for the files. Its "" for generic
159# fs and ext4/fat and full patch for sb hostfs
160# UBOOT is set in env
161function test_image() {
162 addr="0x01000008"
163 length="0x00100000"
164
165 case "$2" in
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +0300166 fat*)
Stefan Brüns86853562016-09-14 01:01:27 +0200167 FPATH=""
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800168 PREFIX="fat"
169 WRITE="write"
170 ;;
171
172 ext4)
Stefan Brüns86853562016-09-14 01:01:27 +0200173 # ext4 needs absolute path
174 FPATH="/"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800175 PREFIX="ext4"
176 WRITE="write"
177 ;;
178
179 *)
180 echo "Unhandled filesystem $2. Exiting!"
181 exit
182 ;;
183 esac
184
185 case "$5" in
186 fs)
187 PREFIX=""
188 WRITE="save"
189 SUFFIX=" 0:0"
190 ;;
191
192 nonfs)
193 SUFFIX=" 0:0"
194 ;;
195
196 sb)
Tom Rini734e2072018-11-26 08:24:51 -0500197 PREFIX="host "
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800198 WRITE="save"
199 SUFFIX="fs -"
200 ;;
201
202 *)
203 echo "Unhandled mode $5. Exiting!"
204 exit
205 ;;
206
207 esac
208
Stefan Brüns86853562016-09-14 01:01:27 +0200209 # sb always uses full path to mointpoint, irrespective of filesystem
210 if [ "$5" = "sb" ]; then
211 FPATH=${6}/
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800212 fi
213
Stefan Brüns86853562016-09-14 01:01:27 +0200214 FILE_WRITE=${3}.w
215 FILE_SMALL=$3
216 FILE_BIG=$4
217
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800218 # In u-boot commands, <interface> stands for host or hostfs
219 # hostfs maps to the host fs.
Tom Rini734e2072018-11-26 08:24:51 -0500220 # host maps to the "host bind" that we do
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800221
222 $UBOOT << EOF
223sb=$5
Tom Rini734e2072018-11-26 08:24:51 -0500224setenv bind 'if test "\$sb" != sb; then host bind 0 "$1"; fi'
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800225run bind
226# Test Case 1 - ls
227${PREFIX}ls host${SUFFIX} $6
Eugen Hristev78ccbd12018-05-09 16:28:38 +0300228# In addition, test with a nonexistent directory to see if we crash.
229${PREFIX}ls host${SUFFIX} invalid_d
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800230#
231# We want ${PREFIX}size host 0:0 $3 for host commands and
Tom Rini734e2072018-11-26 08:24:51 -0500232# host size hostfs - $3 for hostfs commands.
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800233# 1MB is 0x0010 0000
Tuomas Tynkkynen7c890f12017-09-25 22:06:34 +0300234# Test Case 2a - size of small file
Stefan Brüns86853562016-09-14 01:01:27 +0200235${PREFIX}size host${SUFFIX} ${FPATH}$FILE_SMALL
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800236printenv filesize
237setenv filesize
Tuomas Tynkkynen7c890f12017-09-25 22:06:34 +0300238# Test Case 2b - size of small file via a path using '..'
239${PREFIX}size host${SUFFIX} ${FPATH}SUBDIR/../$FILE_SMALL
240printenv filesize
241setenv filesize
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800242
243# 2.5GB (1024*1024*2500) is 0x9C40 0000
244# Test Case 3 - size of big file
Stefan Brüns86853562016-09-14 01:01:27 +0200245${PREFIX}size host${SUFFIX} ${FPATH}$FILE_BIG
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800246printenv filesize
247setenv filesize
248
249# Notes about load operation
250# If I use 0x01000000 I get DMA misaligned error message
251# Last two parameters are size and offset.
252
253# Test Case 4a - Read full 1MB of small file
Stefan Brüns86853562016-09-14 01:01:27 +0200254${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_SMALL
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800255printenv filesize
256# Test Case 4b - Read full 1MB of small file
257md5sum $addr \$filesize
258setenv filesize
259
260# Test Case 5a - First 1MB of big file
Stefan Brüns86853562016-09-14 01:01:27 +0200261${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG $length 0x0
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800262printenv filesize
263# Test Case 5b - First 1MB of big file
264md5sum $addr \$filesize
265setenv filesize
266
267# fails for ext as no offset support
268# Test Case 6a - Last 1MB of big file
Stefan Brüns86853562016-09-14 01:01:27 +0200269${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG $length 0x9C300000
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800270printenv filesize
271# Test Case 6b - Last 1MB of big file
272md5sum $addr \$filesize
273setenv filesize
274
275# fails for ext as no offset support
276# Test Case 7a - One from the last 1MB chunk of 2GB
Stefan Brüns86853562016-09-14 01:01:27 +0200277${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG $length 0x7FF00000
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800278printenv filesize
279# Test Case 7b - One from the last 1MB chunk of 2GB
280md5sum $addr \$filesize
281setenv filesize
282
283# fails for ext as no offset support
284# Test Case 8a - One from the start 1MB chunk from 2GB
Stefan Brüns86853562016-09-14 01:01:27 +0200285${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG $length 0x80000000
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800286printenv filesize
287# Test Case 8b - One from the start 1MB chunk from 2GB
288md5sum $addr \$filesize
289setenv filesize
290
291# fails for ext as no offset support
292# Test Case 9a - One 1MB chunk crossing the 2GB boundary
Stefan Brüns86853562016-09-14 01:01:27 +0200293${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG $length 0x7FF80000
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800294printenv filesize
295# Test Case 9b - One 1MB chunk crossing the 2GB boundary
296md5sum $addr \$filesize
297setenv filesize
298
299# Generic failure case
300# Test Case 10 - 2MB chunk from the last 1MB of big file
Stefan Brüns86853562016-09-14 01:01:27 +0200301${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG 0x00200000 0x9C300000
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800302printenv filesize
303#
304
305# Read 1MB from small file
Stefan Brüns86853562016-09-14 01:01:27 +0200306${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_SMALL
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800307# Write it back to test the writes
308# Test Case 11a - Check that the write succeeded
Stefan Brüns86853562016-09-14 01:01:27 +0200309${PREFIX}${WRITE} host${SUFFIX} $addr ${FPATH}$FILE_WRITE \$filesize
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800310mw.b $addr 00 100
Stefan Brüns86853562016-09-14 01:01:27 +0200311${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_WRITE
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800312# Test Case 11b - Check md5 of written to is same as the one read from
313md5sum $addr \$filesize
314setenv filesize
315#
Stefan Brüns14678b32016-09-14 01:01:30 +0200316
317# Next test case checks writing a file whose dirent
318# is the first in the block, which is always true for "."
319# The write should fail, but the lookup should work
320# Test Case 12 - Check directory traversal
321${PREFIX}${WRITE} host${SUFFIX} $addr ${FPATH}. 0x10
Stefan Brüns2365a4b2016-09-14 01:01:31 +0200322
323# Read 1MB from small file
324${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_SMALL
325# Write it via "same directory", i.e. "." dirent
326# Test Case 13a - Check directory traversal
327${PREFIX}${WRITE} host${SUFFIX} $addr ${FPATH}./${FILE_WRITE}2 \$filesize
328mw.b $addr 00 100
329${PREFIX}load host${SUFFIX} $addr ${FPATH}./${FILE_WRITE}2
330# Test Case 13b - Check md5 of written to is same as the one read from
331md5sum $addr \$filesize
332setenv filesize
333mw.b $addr 00 100
334${PREFIX}load host${SUFFIX} $addr ${FPATH}${FILE_WRITE}2
335# Test Case 13c - Check md5 of written to is same as the one read from
336md5sum $addr \$filesize
337setenv filesize
338#
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800339reset
340
341EOF
342}
343
344# 1st argument is the name of the image file.
345# 2nd argument is the file where we generate the md5s of the files
346# generated with the appropriate start and length that we use to test.
347# It creates the necessary files in the image to test.
348# $GB2p5 is the path of the big file (2.5 GB)
349# $MB1 is the path of the small file (1 MB)
350# $MOUNT_DIR is the path we can use to mount the image file.
351function create_files() {
352 # Mount the image so we can populate it.
353 mkdir -p "$MOUNT_DIR"
354 sudo mount -o loop,rw "$1" "$MOUNT_DIR"
355
Tuomas Tynkkynen7c890f12017-09-25 22:06:34 +0300356 # Create a subdirectory.
357 sudo mkdir -p "$MOUNT_DIR/SUBDIR"
358
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800359 # Create big file in this image.
360 # Note that we work only on the start 1MB, couple MBs in the 2GB range
361 # and the last 1 MB of the huge 2.5GB file.
362 # So, just put random values only in those areas.
363 if [ ! -f "${GB2p5}" ]; then
364 sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=1 \
365 &> /dev/null
366 sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=2 seek=2047 \
367 &> /dev/null
368 sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=1 seek=2499 \
369 &> /dev/null
370 fi
371
372 # Create a small file in this image.
373 if [ ! -f "${MB1}" ]; then
374 sudo dd if=/dev/urandom of="${MB1}" bs=1M count=1 \
375 &> /dev/null
376 fi
377
Stefan Brüns2365a4b2016-09-14 01:01:31 +0200378 # Delete the small file copies which possibly are written as part of a
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800379 # previous test.
380 sudo rm -f "${MB1}.w"
Stefan Brüns2365a4b2016-09-14 01:01:31 +0200381 sudo rm -f "${MB1}.w2"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800382
383 # Generate the md5sums of reads that we will test against small file
384 dd if="${MB1}" bs=1M skip=0 count=1 2> /dev/null | md5sum > "$2"
385
386 # Generate the md5sums of reads that we will test against big file
387 # One from beginning of file.
388 dd if="${GB2p5}" bs=1M skip=0 count=1 \
389 2> /dev/null | md5sum >> "$2"
390
391 # One from end of file.
392 dd if="${GB2p5}" bs=1M skip=2499 count=1 \
393 2> /dev/null | md5sum >> "$2"
394
395 # One from the last 1MB chunk of 2GB
396 dd if="${GB2p5}" bs=1M skip=2047 count=1 \
397 2> /dev/null | md5sum >> "$2"
398
399 # One from the start 1MB chunk from 2GB
400 dd if="${GB2p5}" bs=1M skip=2048 count=1 \
401 2> /dev/null | md5sum >> "$2"
402
403 # One 1MB chunk crossing the 2GB boundary
404 dd if="${GB2p5}" bs=512K skip=4095 count=2 \
405 2> /dev/null | md5sum >> "$2"
406
407 sync
408 sudo umount "$MOUNT_DIR"
409 rmdir "$MOUNT_DIR"
410}
411
412# 1st parameter is the text to print
413# if $? is 0 its a pass, else a fail
414# As a side effect it shall update env variable PASS and FAIL
415function pass_fail() {
416 if [ $? -eq 0 ]; then
417 echo pass - "$1"
418 PASS=$((PASS + 1))
419 else
420 echo FAIL - "$1"
421 FAIL=$((FAIL + 1))
422 fi
423}
424
425# 1st parameter is the string which leads to an md5 generation
426# 2nd parameter is the file we grep, for that string
427# 3rd parameter is the name of the file which has md5s in it
428# 4th parameter is the line # in the md5 file that we match it against
429# This function checks if the md5 of the file in the sandbox matches
430# that calculated while generating the file
431# 5th parameter is the string to print with the result
432check_md5() {
433 # md5sum in u-boot has output of form:
434 # md5 for 01000008 ... 01100007 ==> <md5>
435 # the 7th field is the actual md5
Stefan Brünsd9554b72016-09-14 01:01:29 +0200436 md5_src=`grep -A2 "$1" "$2" | grep "md5 for" | tr -d '\r'`
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800437 md5_src=($md5_src)
438 md5_src=${md5_src[6]}
439
440 # The md5 list, each line is of the form:
441 # - <md5>
442 # the 2nd field is the actual md5
443 md5_dst=`sed -n $4p $3`
444 md5_dst=($md5_dst)
445 md5_dst=${md5_dst[0]}
446
447 # For a pass they should match.
448 [ "$md5_src" = "$md5_dst" ]
449 pass_fail "$5"
450}
451
452# 1st parameter is the name of the output file to check
453# 2nd parameter is the name of the file containing the md5 expected
454# 3rd parameter is the name of the small file
455# 4th parameter is the name of the big file
456# 5th paramter is the name of the written file
457# This function checks the output file for correct results.
458function check_results() {
459 echo "** Start $1"
460
461 PASS=0
462 FAIL=0
463
464 # Check if the ls is showing correct results for 2.5 gb file
Tuomas Tynkkynen7c890f12017-09-25 22:06:34 +0300465 grep -A7 "Test Case 1 " "$1" | egrep -iq "2621440000 *$4"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800466 pass_fail "TC1: ls of $4"
467
468 # Check if the ls is showing correct results for 1 mb file
Tuomas Tynkkynen7c890f12017-09-25 22:06:34 +0300469 grep -A7 "Test Case 1 " "$1" | egrep -iq "1048576 *$3"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800470 pass_fail "TC1: ls of $3"
471
472 # Check size command on 1MB.file
Tuomas Tynkkynen7c890f12017-09-25 22:06:34 +0300473 egrep -A3 "Test Case 2a " "$1" | grep -q "filesize=100000"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800474 pass_fail "TC2: size of $3"
Tuomas Tynkkynen7c890f12017-09-25 22:06:34 +0300475 # Check size command on 1MB.file via a path using '..'
476 egrep -A3 "Test Case 2b " "$1" | grep -q "filesize=100000"
477 pass_fail "TC2: size of $3 via a path using '..'"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800478
479 # Check size command on 2.5GB.file
480 egrep -A3 "Test Case 3 " "$1" | grep -q "filesize=9c400000"
481 pass_fail "TC3: size of $4"
482
483 # Check read full mb of 1MB.file
Stefan Brünsd9554b72016-09-14 01:01:29 +0200484 grep -A4 "Test Case 4a " "$1" | grep -q "filesize=100000"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800485 pass_fail "TC4: load of $3 size"
486 check_md5 "Test Case 4b " "$1" "$2" 1 "TC4: load from $3"
487
488 # Check first mb of 2.5GB.file
Stefan Brünsd9554b72016-09-14 01:01:29 +0200489 grep -A4 "Test Case 5a " "$1" | grep -q "filesize=100000"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800490 pass_fail "TC5: load of 1st MB from $4 size"
491 check_md5 "Test Case 5b " "$1" "$2" 2 "TC5: load of 1st MB from $4"
492
493 # Check last mb of 2.5GB.file
Stefan Brünsd9554b72016-09-14 01:01:29 +0200494 grep -A4 "Test Case 6a " "$1" | grep -q "filesize=100000"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800495 pass_fail "TC6: load of last MB from $4 size"
496 check_md5 "Test Case 6b " "$1" "$2" 3 "TC6: load of last MB from $4"
497
498 # Check last 1mb chunk of 2gb from 2.5GB file
Stefan Brünsd9554b72016-09-14 01:01:29 +0200499 grep -A4 "Test Case 7a " "$1" | grep -q "filesize=100000"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800500 pass_fail "TC7: load of last 1mb chunk of 2GB from $4 size"
501 check_md5 "Test Case 7b " "$1" "$2" 4 \
502 "TC7: load of last 1mb chunk of 2GB from $4"
503
504 # Check first 1mb chunk after 2gb from 2.5GB file
Stefan Brünsd9554b72016-09-14 01:01:29 +0200505 grep -A4 "Test Case 8a " "$1" | grep -q "filesize=100000"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800506 pass_fail "TC8: load 1st MB chunk after 2GB from $4 size"
507 check_md5 "Test Case 8b " "$1" "$2" 5 \
508 "TC8: load 1st MB chunk after 2GB from $4"
509
510 # Check 1mb chunk crossing the 2gb boundary from 2.5GB file
Stefan Brünsd9554b72016-09-14 01:01:29 +0200511 grep -A4 "Test Case 9a " "$1" | grep -q "filesize=100000"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800512 pass_fail "TC9: load 1MB chunk crossing 2GB boundary from $4 size"
513 check_md5 "Test Case 9b " "$1" "$2" 6 \
514 "TC9: load 1MB chunk crossing 2GB boundary from $4"
515
Tom Rinie8de6d72015-10-11 16:48:36 -0400516 # Check 2mb chunk from the last 1MB of 2.5GB file loads 1MB
Stefan Brünsd9554b72016-09-14 01:01:29 +0200517 grep -A5 "Test Case 10 " "$1" | grep -q "filesize=100000"
Tom Rinie8de6d72015-10-11 16:48:36 -0400518 pass_fail "TC10: load 2MB from the last 1MB of $4 loads 1MB"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800519
520 # Check 1mb chunk write
Stefan Brünsd9554b72016-09-14 01:01:29 +0200521 grep -A2 "Test Case 11a " "$1" | grep -q '1048576 bytes written'
Stefan Brüns06806e32016-09-14 01:01:28 +0200522 pass_fail "TC11: 1MB write to $3.w - write succeeded"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800523 check_md5 "Test Case 11b " "$1" "$2" 1 \
Stefan Brüns06806e32016-09-14 01:01:28 +0200524 "TC11: 1MB write to $3.w - content verified"
Stefan Brüns14678b32016-09-14 01:01:30 +0200525
526 # Check lookup of 'dot' directory
AKASHI Takahiroe75996c2018-09-11 15:59:17 +0900527 grep -A4 "Test Case 12 " "$1" | grep -q 'Unable to write'
Stefan Brüns14678b32016-09-14 01:01:30 +0200528 pass_fail "TC12: 1MB write to . - write denied"
Stefan Brüns2365a4b2016-09-14 01:01:31 +0200529
530 # Check directory traversal
531 grep -A2 "Test Case 13a " "$1" | grep -q '1048576 bytes written'
532 pass_fail "TC13: 1MB write to ./$3.w2 - write succeeded"
533 check_md5 "Test Case 13b " "$1" "$2" 1 \
534 "TC13: 1MB read from ./$3.w2 - content verified"
535 check_md5 "Test Case 13c " "$1" "$2" 1 \
536 "TC13: 1MB read from $3.w2 - content verified"
537
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800538 echo "** End $1"
539}
540
541# Takes in one parameter which is "fs" or "nonfs", which then dictates
542# if a fs test (size/load/save) or a nonfs test (fatread/extread) needs to
543# be performed.
544function test_fs_nonfs() {
545 echo "Creating files in $fs image if not already present."
546 create_files $IMAGE $MD5_FILE_FS
547
Stephen Warren04812602015-08-10 22:45:14 -0600548 OUT_FILE="${OUT}.$1.${fs}.out"
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800549 test_image $IMAGE $fs $SMALL_FILE $BIG_FILE $1 "" \
Stephen Warren04812602015-08-10 22:45:14 -0600550 > ${OUT_FILE} 2>&1
Stefan Brünsd9554b72016-09-14 01:01:29 +0200551 # strip out noise from fs code
552 grep -v -e "File System is consistent\|update journal finished" \
553 -e "reading .*\.file\|writing .*\.file.w" \
554 < ${OUT_FILE} > ${OUT_FILE}_clean
555 check_results ${OUT_FILE}_clean $MD5_FILE_FS $SMALL_FILE \
556 $BIG_FILE
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800557 TOTAL_FAIL=$((TOTAL_FAIL + FAIL))
558 TOTAL_PASS=$((TOTAL_PASS + PASS))
559 echo "Summary: PASS: $PASS FAIL: $FAIL"
560 echo "--------------------------------------------"
561}
562
563# ********************
564# * End of functions *
565# ********************
566
567check_clean "$1"
568check_prereq
569compile_sandbox
570prepare_env
571
572# Track TOTAL_FAIL and TOTAL_PASS
573TOTAL_FAIL=0
574TOTAL_PASS=0
575
576# In each loop, for a given file system image, we test both the
577# fs command, like load/size/write, the file system specific command
Tom Rini734e2072018-11-26 08:24:51 -0500578# like: ext4load/ext4size/ext4write and the host load/ls/save commands.
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +0300579for fs in ext4 fat16 fat32; do
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800580
581 echo "Creating $fs image if not already present."
582 IMAGE=${IMG}.${fs}.img
583 MD5_FILE_FS="${MD5_FILE}.${fs}"
584 create_image $IMAGE $fs
585
Tom Rini734e2072018-11-26 08:24:51 -0500586 # host commands test
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800587 echo "Creating files in $fs image if not already present."
588 create_files $IMAGE $MD5_FILE_FS
589
Tom Rini734e2072018-11-26 08:24:51 -0500590 # Lets mount the image and test host hostfs commands
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800591 mkdir -p "$MOUNT_DIR"
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +0300592 case "$fs" in
593 fat*)
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800594 uid="uid=`id -u`"
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +0300595 ;;
596 *)
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800597 uid=""
Tuomas Tynkkynenedce5882017-09-25 22:06:32 +0300598 ;;
599 esac
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800600 sudo mount -o loop,rw,$uid "$IMAGE" "$MOUNT_DIR"
601 sudo chmod 777 "$MOUNT_DIR"
602
603 OUT_FILE="${OUT}.sb.${fs}.out"
604 test_image $IMAGE $fs $SMALL_FILE $BIG_FILE sb `pwd`/$MOUNT_DIR \
Stephen Warren04812602015-08-10 22:45:14 -0600605 > ${OUT_FILE} 2>&1
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800606 sudo umount "$MOUNT_DIR"
607 rmdir "$MOUNT_DIR"
608
Stefan Brüns06806e32016-09-14 01:01:28 +0200609 check_results $OUT_FILE $MD5_FILE_FS $SMALL_FILE $BIG_FILE
Suriyan Ramasami6c016482014-11-17 14:39:39 -0800610 TOTAL_FAIL=$((TOTAL_FAIL + FAIL))
611 TOTAL_PASS=$((TOTAL_PASS + PASS))
612 echo "Summary: PASS: $PASS FAIL: $FAIL"
613 echo "--------------------------------------------"
614
615 test_fs_nonfs nonfs
616 test_fs_nonfs fs
617done
618
619echo "Total Summary: TOTAL PASS: $TOTAL_PASS TOTAL FAIL: $TOTAL_FAIL"
620echo "--------------------------------------------"
621if [ $TOTAL_FAIL -eq 0 ]; then
622 echo "PASSED"
623 exit 0
624else
625 echo "FAILED"
626 exit 1
627fi