| Andy Fleming | 87e2987 | 2015-11-04 15:48:32 -0600 | [diff] [blame] | 1 | /* |
| 2 | * Based on corenet_ds.h |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #ifndef __CONFIG_H |
| 8 | #define __CONFIG_H |
| 9 | |
| 10 | #define CONFIG_DISPLAY_BOARDINFO |
| 11 | |
| 12 | #define CONFIG_CYRUS |
| 13 | |
| 14 | #define CONFIG_PHYS_64BIT |
| 15 | |
| 16 | #if !defined(CONFIG_PPC_P5020) && !defined(CONFIG_PPC_P5040) |
| 17 | #error Must call Cyrus CONFIG with a specific CPU enabled. |
| 18 | #endif |
| 19 | |
| 20 | |
| 21 | #define CONFIG_MMC |
| 22 | #define CONFIG_SDCARD |
| 23 | #define CONFIG_FSL_SATA_V2 |
| 24 | #define CONFIG_PCIE3 |
| 25 | #define CONFIG_PCIE4 |
| 26 | #ifdef CONFIG_PPC_P5020 |
| 27 | #define CONFIG_SYS_FSL_RAID_ENGINE |
| 28 | #define CONFIG_SYS_DPAA_RMAN |
| 29 | #endif |
| 30 | #define CONFIG_SYS_DPAA_PME |
| 31 | |
| 32 | /* |
| 33 | * Corenet DS style board configuration file |
| 34 | */ |
| 35 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE |
| 36 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc |
| 37 | #define CONFIG_SYS_FSL_PBL_PBI board/varisys/cyrus/pbi.cfg |
| 38 | #if defined(CONFIG_PPC_P5020) |
| 39 | #define CONFIG_SYS_CLK_FREQ 133000000 |
| 40 | #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5020_v2.cfg |
| 41 | #elif defined(CONFIG_PPC_P5040) |
| 42 | #define CONFIG_SYS_CLK_FREQ 100000000 |
| 43 | #define CONFIG_SYS_FSL_PBL_RCW board/varisys/cyrus/rcw_p5040.cfg |
| 44 | #endif |
| 45 | |
| 46 | |
| 47 | /* High Level Configuration Options */ |
| 48 | #define CONFIG_BOOKE |
| 49 | #define CONFIG_E500 /* BOOKE e500 family */ |
| 50 | #define CONFIG_E500MC /* BOOKE e500mc family */ |
| 51 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ |
| 52 | #define CONFIG_MP /* support multiple processors */ |
| 53 | |
| 54 | |
| 55 | #define CONFIG_SYS_MMC_MAX_DEVICE 1 |
| 56 | |
| 57 | #ifndef CONFIG_SYS_TEXT_BASE |
| 58 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
| 59 | #endif |
| 60 | |
| 61 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ |
| 62 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS |
| 63 | #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ |
| 64 | #define CONFIG_PCI /* Enable PCI/PCIE */ |
| 65 | #define CONFIG_PCIE1 /* PCIE controler 1 */ |
| 66 | #define CONFIG_PCIE2 /* PCIE controler 2 */ |
| 67 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ |
| 68 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ |
| 69 | |
| 70 | #define CONFIG_FSL_LAW /* Use common FSL init code */ |
| 71 | |
| 72 | #define CONFIG_ENV_OVERWRITE |
| 73 | |
| 74 | #define CONFIG_SYS_NO_FLASH |
| 75 | |
| 76 | #if defined(CONFIG_SDCARD) |
| 77 | #define CONFIG_SYS_EXTRA_ENV_RELOC |
| 78 | #define CONFIG_ENV_IS_IN_MMC |
| 79 | #define CONFIG_FSL_FIXED_MMC_LOCATION |
| 80 | #define CONFIG_SYS_MMC_ENV_DEV 0 |
| 81 | #define CONFIG_ENV_SIZE 0x2000 |
| 82 | #define CONFIG_ENV_OFFSET (512 * 1658) |
| 83 | #endif |
| 84 | |
| 85 | /* |
| 86 | * These can be toggled for performance analysis, otherwise use default. |
| 87 | */ |
| 88 | #define CONFIG_SYS_CACHE_STASHING |
| 89 | #define CONFIG_BACKSIDE_L2_CACHE |
| 90 | #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E |
| 91 | #define CONFIG_BTB /* toggle branch predition */ |
| 92 | #define CONFIG_DDR_ECC |
| 93 | #ifdef CONFIG_DDR_ECC |
| 94 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER |
| 95 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef |
| 96 | #endif |
| 97 | |
| 98 | #define CONFIG_ENABLE_36BIT_PHYS |
| 99 | |
| 100 | #ifdef CONFIG_PHYS_64BIT |
| 101 | #define CONFIG_ADDR_MAP |
| 102 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ |
| 103 | #endif |
| 104 | |
| 105 | /* test POST memory test */ |
| 106 | #undef CONFIG_POST |
| 107 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ |
| 108 | #define CONFIG_SYS_MEMTEST_END 0x00400000 |
| 109 | #define CONFIG_SYS_ALT_MEMTEST |
| 110 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ |
| 111 | |
| 112 | /* |
| 113 | * Config the L3 Cache as L3 SRAM |
| 114 | */ |
| 115 | #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE |
| 116 | #ifdef CONFIG_PHYS_64BIT |
| 117 | #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) |
| 118 | #else |
| 119 | #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR |
| 120 | #endif |
| 121 | #define CONFIG_SYS_L3_SIZE (1024 << 10) |
| 122 | #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) |
| 123 | |
| 124 | #ifdef CONFIG_PHYS_64BIT |
| 125 | #define CONFIG_SYS_DCSRBAR 0xf0000000 |
| 126 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull |
| 127 | #endif |
| 128 | |
| 129 | /* |
| 130 | * DDR Setup |
| 131 | */ |
| 132 | #define CONFIG_VERY_BIG_RAM |
| 133 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 |
| 134 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE |
| 135 | |
| 136 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
| 137 | #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) |
| 138 | |
| 139 | #define CONFIG_DDR_SPD |
| 140 | #define CONFIG_SYS_FSL_DDR3 |
| 141 | |
| 142 | #define CONFIG_SYS_SPD_BUS_NUM 1 |
| 143 | #define SPD_EEPROM_ADDRESS1 0x51 |
| 144 | #define SPD_EEPROM_ADDRESS2 0x52 |
| 145 | #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ |
| 146 | |
| 147 | /* |
| 148 | * Local Bus Definitions |
| 149 | */ |
| 150 | |
| 151 | #define CONFIG_SYS_LBC0_BASE 0xe0000000 /* Start of LBC Registers */ |
| 152 | #ifdef CONFIG_PHYS_64BIT |
| 153 | #define CONFIG_SYS_LBC0_BASE_PHYS 0xfe0000000ull |
| 154 | #else |
| 155 | #define CONFIG_SYS_LBC0_BASE_PHYS CONFIG_SYS_LBC0_BASE |
| 156 | #endif |
| 157 | |
| 158 | #define CONFIG_SYS_LBC1_BASE 0xe1000000 /* Start of LBC Registers */ |
| 159 | #ifdef CONFIG_PHYS_64BIT |
| 160 | #define CONFIG_SYS_LBC1_BASE_PHYS 0xfe1000000ull |
| 161 | #else |
| 162 | #define CONFIG_SYS_LBC1_BASE_PHYS CONFIG_SYS_LBC1_BASE |
| 163 | #endif |
| 164 | |
| 165 | /* Set the local bus clock 1/16 of platform clock */ |
| 166 | #define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_16 | LCRR_EADC_1) |
| 167 | |
| 168 | #define CONFIG_SYS_BR0_PRELIM \ |
| 169 | (BR_PHYS_ADDR(CONFIG_SYS_LBC0_BASE_PHYS) | BR_PS_16 | BR_V) |
| 170 | #define CONFIG_SYS_BR1_PRELIM \ |
| 171 | (BR_PHYS_ADDR(CONFIG_SYS_LBC1_BASE_PHYS) | BR_PS_16 | BR_V) |
| 172 | |
| 173 | #define CONFIG_SYS_OR0_PRELIM 0xfff00010 |
| 174 | #define CONFIG_SYS_OR1_PRELIM 0xfff00010 |
| 175 | |
| 176 | |
| 177 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
| 178 | |
| 179 | #if defined(CONFIG_RAMBOOT_PBL) |
| 180 | #define CONFIG_SYS_RAMBOOT |
| 181 | #endif |
| 182 | |
| 183 | #define CONFIG_BOARD_EARLY_INIT_F |
| 184 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ |
| 185 | #define CONFIG_MISC_INIT_R |
| 186 | |
| 187 | #define CONFIG_HWCONFIG |
| 188 | |
| 189 | /* define to use L1 as initial stack */ |
| 190 | #define CONFIG_L1_INIT_RAM |
| 191 | #define CONFIG_SYS_INIT_RAM_LOCK |
| 192 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ |
| 193 | #ifdef CONFIG_PHYS_64BIT |
| 194 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf |
| 195 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR |
| 196 | /* The assembler doesn't like typecast */ |
| 197 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ |
| 198 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ |
| 199 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) |
| 200 | #else |
| 201 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ |
| 202 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 |
| 203 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS |
| 204 | #endif |
| 205 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ |
| 206 | |
| 207 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| 208 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
| 209 | |
| 210 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| 211 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ |
| 212 | |
| 213 | /* Serial Port - controlled on board with jumper J8 |
| 214 | * open - index 2 |
| 215 | * shorted - index 1 |
| 216 | */ |
| 217 | #define CONFIG_CONS_INDEX 1 |
| Andy Fleming | 87e2987 | 2015-11-04 15:48:32 -0600 | [diff] [blame] | 218 | #define CONFIG_SYS_NS16550_SERIAL |
| 219 | #define CONFIG_SYS_NS16550_REG_SIZE 1 |
| 220 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) |
| 221 | |
| 222 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
| 223 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} |
| 224 | |
| 225 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) |
| 226 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) |
| 227 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) |
| 228 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) |
| 229 | |
| 230 | /* Use the HUSH parser */ |
| 231 | #define CONFIG_SYS_HUSH_PARSER |
| 232 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| 233 | |
| 234 | /* pass open firmware flat tree */ |
| 235 | #define CONFIG_OF_LIBFDT |
| 236 | #define CONFIG_OF_BOARD_SETUP |
| 237 | |
| 238 | /* new uImage format support */ |
| 239 | #define CONFIG_FIT |
| 240 | #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ |
| 241 | |
| 242 | /* I2C */ |
| 243 | #define CONFIG_SYS_I2C |
| 244 | #define CONFIG_SYS_I2C_FSL |
| 245 | #define CONFIG_I2C_MULTI_BUS |
| 246 | #define CONFIG_I2C_CMD_TREE |
| 247 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed and slave address */ |
| 248 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F |
| 249 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 |
| 250 | #define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed and slave address */ |
| 251 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F |
| 252 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 |
| 253 | #define CONFIG_SYS_FSL_I2C3_SPEED 400000 /* I2C speed and slave address */ |
| 254 | #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F |
| 255 | #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 |
| 256 | #define CONFIG_SYS_FSL_I2C4_SPEED 400000 /* I2C speed and slave address */ |
| 257 | #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F |
| 258 | #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 |
| 259 | |
| 260 | #define CONFIG_ID_EEPROM |
| 261 | #define CONFIG_SYS_I2C_EEPROM_NXID |
| 262 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 |
| 263 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| 264 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 |
| 265 | |
| 266 | #define CONFIG_SYS_I2C_GENERIC_MAC |
| 267 | #define CONFIG_SYS_I2C_MAC1_BUS 3 |
| 268 | #define CONFIG_SYS_I2C_MAC1_CHIP_ADDR 0x57 |
| 269 | #define CONFIG_SYS_I2C_MAC1_DATA_ADDR 0xf2 |
| 270 | #define CONFIG_SYS_I2C_MAC2_BUS 0 |
| 271 | #define CONFIG_SYS_I2C_MAC2_CHIP_ADDR 0x50 |
| 272 | #define CONFIG_SYS_I2C_MAC2_DATA_ADDR 0xfa |
| 273 | |
| 274 | #define CONFIG_CMD_DATE 1 |
| 275 | #define CONFIG_RTC_MCP79411 1 |
| 276 | #define CONFIG_SYS_RTC_BUS_NUM 3 |
| 277 | #define CONFIG_SYS_I2C_RTC_ADDR 0x6f |
| 278 | |
| 279 | /* |
| 280 | * eSPI - Enhanced SPI |
| 281 | */ |
| Andy Fleming | 87e2987 | 2015-11-04 15:48:32 -0600 | [diff] [blame] | 282 | |
| 283 | /* |
| 284 | * General PCI |
| 285 | * Memory space is mapped 1-1, but I/O space must start from 0. |
| 286 | */ |
| 287 | |
| 288 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ |
| 289 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 |
| 290 | #ifdef CONFIG_PHYS_64BIT |
| 291 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 |
| 292 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull |
| 293 | #else |
| 294 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 |
| 295 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 |
| 296 | #endif |
| 297 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ |
| 298 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 |
| 299 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 |
| 300 | #ifdef CONFIG_PHYS_64BIT |
| 301 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull |
| 302 | #else |
| 303 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 |
| 304 | #endif |
| 305 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ |
| 306 | |
| 307 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ |
| 308 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 |
| 309 | #ifdef CONFIG_PHYS_64BIT |
| 310 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 |
| 311 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull |
| 312 | #else |
| 313 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 |
| 314 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 |
| 315 | #endif |
| 316 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ |
| 317 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 |
| 318 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 |
| 319 | #ifdef CONFIG_PHYS_64BIT |
| 320 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull |
| 321 | #else |
| 322 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 |
| 323 | #endif |
| 324 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ |
| 325 | |
| 326 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ |
| 327 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 |
| 328 | #ifdef CONFIG_PHYS_64BIT |
| 329 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 |
| 330 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull |
| 331 | #else |
| 332 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 |
| 333 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 |
| 334 | #endif |
| 335 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ |
| 336 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 |
| 337 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 |
| 338 | #ifdef CONFIG_PHYS_64BIT |
| 339 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull |
| 340 | #else |
| 341 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 |
| 342 | #endif |
| 343 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ |
| 344 | |
| 345 | /* controller 4, Base address 203000 */ |
| 346 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 |
| 347 | #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull |
| 348 | #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ |
| 349 | #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 |
| 350 | #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull |
| 351 | #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ |
| 352 | |
| 353 | /* Qman/Bman */ |
| 354 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ |
| 355 | #define CONFIG_SYS_BMAN_NUM_PORTALS 10 |
| 356 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 |
| 357 | #ifdef CONFIG_PHYS_64BIT |
| 358 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull |
| 359 | #else |
| 360 | #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE |
| 361 | #endif |
| 362 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 |
| 363 | #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 |
| 364 | #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 |
| 365 | #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE |
| 366 | #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) |
| 367 | #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ |
| 368 | CONFIG_SYS_BMAN_CENA_SIZE) |
| 369 | #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) |
| 370 | #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 |
| 371 | #define CONFIG_SYS_QMAN_NUM_PORTALS 10 |
| 372 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 |
| 373 | #ifdef CONFIG_PHYS_64BIT |
| 374 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull |
| 375 | #else |
| 376 | #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE |
| 377 | #endif |
| 378 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 |
| 379 | #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 |
| 380 | #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 |
| 381 | #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE |
| 382 | #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) |
| 383 | #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ |
| 384 | CONFIG_SYS_QMAN_CENA_SIZE) |
| 385 | #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) |
| 386 | #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 |
| 387 | |
| 388 | #define CONFIG_SYS_DPAA_FMAN |
| 389 | /* Default address of microcode for the Linux Fman driver */ |
| 390 | /* |
| 391 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is |
| 392 | * about 825KB (1650 blocks), Env is stored after the image, and the env size is |
| 393 | * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. |
| 394 | */ |
| 395 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC |
| 396 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) |
| 397 | |
| 398 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 |
| 399 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) |
| 400 | |
| 401 | #ifdef CONFIG_SYS_DPAA_FMAN |
| 402 | #define CONFIG_FMAN_ENET |
| 403 | #define CONFIG_PHY_MICREL |
| 404 | #define CONFIG_PHY_MICREL_KSZ9021 |
| 405 | #endif |
| 406 | |
| 407 | #ifdef CONFIG_PCI |
| 408 | #define CONFIG_PCI_INDIRECT_BRIDGE |
| 409 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| 410 | #define CONFIG_NET_MULTI |
| 411 | |
| 412 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
| 413 | #define CONFIG_DOS_PARTITION |
| 414 | #endif /* CONFIG_PCI */ |
| 415 | |
| 416 | /* SATA */ |
| 417 | #ifdef CONFIG_FSL_SATA_V2 |
| 418 | #define CONFIG_LIBATA |
| 419 | #define CONFIG_FSL_SATA |
| 420 | |
| 421 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 |
| 422 | #define CONFIG_SATA1 |
| 423 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR |
| 424 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA |
| 425 | #define CONFIG_SATA2 |
| 426 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR |
| 427 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA |
| 428 | |
| 429 | #define CONFIG_LBA48 |
| 430 | #define CONFIG_CMD_SATA |
| 431 | #define CONFIG_DOS_PARTITION |
| 432 | #define CONFIG_CMD_EXT2 |
| 433 | #endif |
| 434 | |
| 435 | #ifdef CONFIG_FMAN_ENET |
| 436 | #define CONFIG_SYS_TBIPA_VALUE 8 |
| 437 | #define CONFIG_MII /* MII PHY management */ |
| 438 | #define CONFIG_ETHPRIME "FM1@DTSEC4" |
| 439 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ |
| 440 | #endif |
| 441 | |
| 442 | /* |
| 443 | * Environment |
| 444 | */ |
| 445 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ |
| 446 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ |
| 447 | |
| 448 | /* |
| 449 | * Command line configuration. |
| 450 | */ |
| 451 | #define CONFIG_CMD_DHCP |
| 452 | #define CONFIG_CMD_ERRATA |
| 453 | #define CONFIG_CMD_GREPENV |
| 454 | #define CONFIG_CMD_IRQ |
| 455 | #define CONFIG_CMD_I2C |
| 456 | #define CONFIG_CMD_MII |
| 457 | #define CONFIG_CMD_PING |
| 458 | #define CONFIG_CMD_REGINFO |
| 459 | |
| 460 | #ifdef CONFIG_PCI |
| 461 | #define CONFIG_CMD_PCI |
| 462 | #endif |
| 463 | |
| 464 | /* |
| 465 | * USB |
| 466 | */ |
| 467 | #define CONFIG_HAS_FSL_DR_USB |
| 468 | #define CONFIG_HAS_FSL_MPH_USB |
| 469 | |
| 470 | #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) |
| 471 | #define CONFIG_CMD_USB |
| 472 | #define CONFIG_USB_STORAGE |
| 473 | #define CONFIG_USB_EHCI |
| 474 | #define CONFIG_USB_EHCI_FSL |
| 475 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET |
| 476 | #define CONFIG_CMD_EXT2 |
| 477 | #define CONFIG_EHCI_IS_TDI |
| 478 | #define CONFIG_USB_KEYBOARD |
| 479 | #define CONFIG_SYS_USB_EVENT_POLL |
| 480 | /* _VIA_CONTROL_EP */ |
| 481 | #define CONFIG_CONSOLE_MUX |
| 482 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| 483 | #endif |
| 484 | |
| 485 | #ifdef CONFIG_MMC |
| 486 | #define CONFIG_FSL_ESDHC |
| 487 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR |
| 488 | #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT |
| 489 | #define CONFIG_CMD_MMC |
| 490 | #define CONFIG_GENERIC_MMC |
| 491 | #define CONFIG_CMD_EXT2 |
| 492 | #define CONFIG_CMD_FAT |
| 493 | #define CONFIG_DOS_PARTITION |
| 494 | #endif |
| 495 | |
| 496 | /* |
| 497 | * Miscellaneous configurable options |
| 498 | */ |
| 499 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| 500 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
| 501 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ |
| 502 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| 503 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
| 504 | #ifdef CONFIG_CMD_KGDB |
| 505 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| 506 | #else |
| 507 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| 508 | #endif |
| 509 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| 510 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| 511 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| 512 | |
| 513 | /* |
| 514 | * For booting Linux, the board info and command line data |
| 515 | * have to be in the first 64 MB of memory, since this is |
| 516 | * the maximum mapped by the Linux kernel during initialization. |
| 517 | */ |
| 518 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ |
| 519 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ |
| 520 | |
| 521 | #ifdef CONFIG_CMD_KGDB |
| 522 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
| 523 | #endif |
| 524 | |
| 525 | /* |
| 526 | * Environment Configuration |
| 527 | */ |
| 528 | #define CONFIG_ROOTPATH "/opt/nfsroot" |
| 529 | #define CONFIG_BOOTFILE "uImage" |
| 530 | #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ |
| 531 | |
| 532 | /* default location for tftp and bootm */ |
| 533 | #define CONFIG_LOADADDR 1000000 |
| 534 | |
| 535 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ |
| 536 | |
| 537 | #define CONFIG_BAUDRATE 115200 |
| 538 | |
| 539 | #define __USB_PHY_TYPE utmi |
| 540 | |
| 541 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| 542 | "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ |
| 543 | "bank_intlv=cs0_cs1;" \ |
| 544 | "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ |
| 545 | "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ |
| 546 | "netdev=eth0\0" \ |
| 547 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ |
| 548 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ |
| 549 | "consoledev=ttyS0\0" \ |
| 550 | "ramdiskaddr=2000000\0" \ |
| 551 | "fdtaddr=c00000\0" \ |
| 552 | "bdev=sda3\0" |
| 553 | |
| 554 | #define CONFIG_HDBOOT \ |
| 555 | "setenv bootargs root=/dev/$bdev rw " \ |
| 556 | "console=$consoledev,$baudrate $othbootargs;" \ |
| 557 | "tftp $loadaddr $bootfile;" \ |
| 558 | "tftp $fdtaddr $fdtfile;" \ |
| 559 | "bootm $loadaddr - $fdtaddr" |
| 560 | |
| 561 | #define CONFIG_NFSBOOTCOMMAND \ |
| 562 | "setenv bootargs root=/dev/nfs rw " \ |
| 563 | "nfsroot=$serverip:$rootpath " \ |
| 564 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ |
| 565 | "console=$consoledev,$baudrate $othbootargs;" \ |
| 566 | "tftp $loadaddr $bootfile;" \ |
| 567 | "tftp $fdtaddr $fdtfile;" \ |
| 568 | "bootm $loadaddr - $fdtaddr" |
| 569 | |
| 570 | #define CONFIG_RAMBOOTCOMMAND \ |
| 571 | "setenv bootargs root=/dev/ram rw " \ |
| 572 | "console=$consoledev,$baudrate $othbootargs;" \ |
| 573 | "tftp $ramdiskaddr $ramdiskfile;" \ |
| 574 | "tftp $loadaddr $bootfile;" \ |
| 575 | "tftp $fdtaddr $fdtfile;" \ |
| 576 | "bootm $loadaddr $ramdiskaddr $fdtaddr" |
| 577 | |
| 578 | #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT |
| 579 | |
| 580 | #include <asm/fsl_secure_boot.h> |
| 581 | |
| 582 | #ifdef CONFIG_SECURE_BOOT |
| 583 | #endif |
| 584 | |
| 585 | #endif /* __CONFIG_H */ |