Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Yuiko Oshino | d2c3197 | 2017-08-11 12:44:58 -0400 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (c) 2017 Microchip Technology Inc. All rights reserved. |
Yuiko Oshino | d2c3197 | 2017-08-11 12:44:58 -0400 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | #include <dm.h> |
Simon Glass | f7ae49f | 2020-05-10 11:40:05 -0600 | [diff] [blame] | 7 | #include <log.h> |
Yuiko Oshino | d2c3197 | 2017-08-11 12:44:58 -0400 | [diff] [blame] | 8 | #include <malloc.h> |
| 9 | #include <miiphy.h> |
| 10 | #include <memalign.h> |
Simon Glass | 90526e9 | 2020-05-10 11:39:56 -0600 | [diff] [blame] | 11 | #include <net.h> |
Yuiko Oshino | d2c3197 | 2017-08-11 12:44:58 -0400 | [diff] [blame] | 12 | #include <usb.h> |
| 13 | #include <linux/ethtool.h> |
| 14 | #include <linux/mii.h> |
| 15 | #include "usb_ether.h" |
| 16 | #include "lan7x.h" |
| 17 | |
| 18 | /* |
| 19 | * Lan7x infrastructure commands |
| 20 | */ |
| 21 | int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data) |
| 22 | { |
| 23 | int len; |
| 24 | ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1); |
| 25 | |
| 26 | cpu_to_le32s(&data); |
| 27 | tmpbuf[0] = data; |
| 28 | |
| 29 | len = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), |
| 30 | USB_VENDOR_REQUEST_WRITE_REGISTER, |
| 31 | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 32 | 0, index, tmpbuf, sizeof(data), |
| 33 | USB_CTRL_SET_TIMEOUT_MS); |
| 34 | if (len != sizeof(data)) { |
| 35 | debug("%s failed: index=%d, data=%d, len=%d", |
| 36 | __func__, index, data, len); |
| 37 | return -EIO; |
| 38 | } |
| 39 | return 0; |
| 40 | } |
| 41 | |
| 42 | int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data) |
| 43 | { |
| 44 | int len; |
| 45 | ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1); |
| 46 | |
| 47 | len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), |
| 48 | USB_VENDOR_REQUEST_READ_REGISTER, |
| 49 | USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 50 | 0, index, tmpbuf, sizeof(*data), |
| 51 | USB_CTRL_GET_TIMEOUT_MS); |
| 52 | *data = tmpbuf[0]; |
| 53 | if (len != sizeof(*data)) { |
| 54 | debug("%s failed: index=%d, len=%d", __func__, index, len); |
| 55 | return -EIO; |
| 56 | } |
| 57 | |
| 58 | le32_to_cpus(data); |
| 59 | return 0; |
| 60 | } |
| 61 | |
| 62 | static int lan7x_phy_wait_not_busy(struct usb_device *udev) |
| 63 | { |
| 64 | return lan7x_wait_for_bit(udev, __func__, |
| 65 | MII_ACC, MII_ACC_MII_BUSY, |
| 66 | false, 100, 0); |
| 67 | } |
| 68 | |
| 69 | int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx) |
| 70 | { |
| 71 | u32 val, addr; |
| 72 | |
| 73 | /* confirm MII not busy */ |
| 74 | if (lan7x_phy_wait_not_busy(udev)) { |
| 75 | debug("MII is busy in %s\n", __func__); |
| 76 | return -ETIMEDOUT; |
| 77 | } |
| 78 | |
| 79 | /* set the address, index & direction (read from PHY) */ |
| 80 | addr = (phy_id << 11) | (idx << 6) | |
| 81 | MII_ACC_MII_READ | MII_ACC_MII_BUSY; |
| 82 | lan7x_write_reg(udev, MII_ACC, addr); |
| 83 | |
| 84 | if (lan7x_phy_wait_not_busy(udev)) { |
| 85 | debug("Timed out reading MII reg %02X\n", idx); |
| 86 | return -ETIMEDOUT; |
| 87 | } |
| 88 | |
| 89 | lan7x_read_reg(udev, MII_DATA, &val); |
| 90 | |
| 91 | return val & 0xFFFF; |
| 92 | } |
| 93 | |
| 94 | void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx, int regval) |
| 95 | { |
| 96 | u32 addr; |
| 97 | |
| 98 | /* confirm MII not busy */ |
| 99 | if (lan7x_phy_wait_not_busy(udev)) { |
| 100 | debug("MII is busy in %s\n", __func__); |
| 101 | return; |
| 102 | } |
| 103 | |
| 104 | lan7x_write_reg(udev, MII_DATA, regval); |
| 105 | |
| 106 | /* set the address, index & direction (write to PHY) */ |
| 107 | addr = (phy_id << 11) | (idx << 6) | |
| 108 | MII_ACC_MII_WRITE | MII_ACC_MII_BUSY; |
| 109 | lan7x_write_reg(udev, MII_ACC, addr); |
| 110 | |
| 111 | if (lan7x_phy_wait_not_busy(udev)) |
| 112 | debug("Timed out writing MII reg %02X\n", idx); |
| 113 | } |
| 114 | |
| 115 | /* |
| 116 | * Lan7x phylib wrappers |
| 117 | */ |
| 118 | static int lan7x_phylib_mdio_read(struct mii_dev *bus, |
| 119 | int addr, int devad, int reg) |
| 120 | { |
| 121 | struct usb_device *udev = dev_get_parent_priv(bus->priv); |
| 122 | |
| 123 | return lan7x_mdio_read(udev, addr, reg); |
| 124 | } |
| 125 | |
| 126 | static int lan7x_phylib_mdio_write(struct mii_dev *bus, |
| 127 | int addr, int devad, int reg, u16 val) |
| 128 | { |
| 129 | struct usb_device *udev = dev_get_parent_priv(bus->priv); |
| 130 | |
| 131 | lan7x_mdio_write(udev, addr, reg, (int)val); |
| 132 | |
| 133 | return 0; |
| 134 | } |
| 135 | |
| 136 | /* |
| 137 | * Lan7x eeprom functions |
| 138 | */ |
| 139 | static int lan7x_eeprom_confirm_not_busy(struct usb_device *udev) |
| 140 | { |
| 141 | return lan7x_wait_for_bit(udev, __func__, |
| 142 | E2P_CMD, E2P_CMD_EPC_BUSY, |
| 143 | false, 100, 0); |
| 144 | } |
| 145 | |
| 146 | static int lan7x_wait_eeprom(struct usb_device *udev) |
| 147 | { |
| 148 | return lan7x_wait_for_bit(udev, __func__, |
| 149 | E2P_CMD, |
| 150 | (E2P_CMD_EPC_BUSY | E2P_CMD_EPC_TIMEOUT), |
| 151 | false, 100, 0); |
| 152 | } |
| 153 | |
| 154 | static int lan7x_read_eeprom(struct usb_device *udev, |
| 155 | u32 offset, u32 length, u8 *data) |
| 156 | { |
| 157 | u32 val; |
| 158 | int i, ret; |
| 159 | |
| 160 | ret = lan7x_eeprom_confirm_not_busy(udev); |
| 161 | if (ret) |
| 162 | return ret; |
| 163 | |
| 164 | for (i = 0; i < length; i++) { |
| 165 | val = E2P_CMD_EPC_BUSY | E2P_CMD_EPC_CMD_READ | |
| 166 | (offset & E2P_CMD_EPC_ADDR_MASK); |
| 167 | lan7x_write_reg(udev, E2P_CMD, val); |
| 168 | |
| 169 | ret = lan7x_wait_eeprom(udev); |
| 170 | if (ret) |
| 171 | return ret; |
| 172 | |
| 173 | lan7x_read_reg(udev, E2P_DATA, &val); |
| 174 | data[i] = val & 0xFF; |
| 175 | offset++; |
| 176 | } |
| 177 | return ret; |
| 178 | } |
| 179 | |
| 180 | /* |
| 181 | * Lan7x phylib functions |
| 182 | */ |
| 183 | int lan7x_phylib_register(struct udevice *udev) |
| 184 | { |
| 185 | struct usb_device *usbdev = dev_get_parent_priv(udev); |
| 186 | struct lan7x_private *priv = dev_get_priv(udev); |
| 187 | int ret; |
| 188 | |
| 189 | priv->mdiobus = mdio_alloc(); |
| 190 | if (!priv->mdiobus) { |
| 191 | printf("mdio_alloc failed\n"); |
| 192 | return -ENOMEM; |
| 193 | } |
| 194 | priv->mdiobus->read = lan7x_phylib_mdio_read; |
| 195 | priv->mdiobus->write = lan7x_phylib_mdio_write; |
| 196 | sprintf(priv->mdiobus->name, |
| 197 | "lan7x_mdiobus-d%hu-p%hu", usbdev->devnum, usbdev->portnr); |
| 198 | priv->mdiobus->priv = (void *)udev; |
| 199 | |
| 200 | ret = mdio_register(priv->mdiobus); |
| 201 | if (ret) { |
| 202 | printf("mdio_register failed\n"); |
| 203 | free(priv->mdiobus); |
| 204 | return -ENOMEM; |
| 205 | } |
| 206 | |
| 207 | return 0; |
| 208 | } |
| 209 | |
| 210 | int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev) |
| 211 | { |
| 212 | struct lan7x_private *priv = dev_get_priv(udev); |
| 213 | |
| 214 | priv->phydev = phy_connect(priv->mdiobus, dev->phy_id, |
| 215 | udev, PHY_INTERFACE_MODE_MII); |
| 216 | |
| 217 | if (!priv->phydev) { |
| 218 | printf("phy_connect failed\n"); |
| 219 | return -ENODEV; |
| 220 | } |
| 221 | return 0; |
| 222 | } |
| 223 | |
| 224 | int lan7x_eth_phylib_config_start(struct udevice *udev) |
| 225 | { |
| 226 | struct lan7x_private *priv = dev_get_priv(udev); |
| 227 | int ret; |
| 228 | |
| 229 | /* configure supported modes */ |
| 230 | priv->phydev->supported = PHY_BASIC_FEATURES | |
| 231 | SUPPORTED_1000baseT_Full | |
| 232 | SUPPORTED_Pause | |
| 233 | SUPPORTED_Asym_Pause; |
| 234 | |
| 235 | priv->phydev->advertising = ADVERTISED_10baseT_Half | |
| 236 | ADVERTISED_10baseT_Full | |
| 237 | ADVERTISED_100baseT_Half | |
| 238 | ADVERTISED_100baseT_Full | |
| 239 | ADVERTISED_1000baseT_Full | |
| 240 | ADVERTISED_Pause | |
| 241 | ADVERTISED_Asym_Pause | |
| 242 | ADVERTISED_Autoneg; |
| 243 | |
| 244 | priv->phydev->autoneg = AUTONEG_ENABLE; |
| 245 | |
| 246 | ret = genphy_config_aneg(priv->phydev); |
| 247 | if (ret) { |
| 248 | printf("genphy_config_aneg failed\n"); |
| 249 | return ret; |
| 250 | } |
| 251 | ret = phy_startup(priv->phydev); |
| 252 | if (ret) { |
| 253 | printf("phy_startup failed\n"); |
| 254 | return ret; |
| 255 | } |
| 256 | |
| 257 | debug("** %s() speed %i duplex %i adv %X supp %X\n", __func__, |
| 258 | priv->phydev->speed, priv->phydev->duplex, |
| 259 | priv->phydev->advertising, priv->phydev->supported); |
| 260 | |
| 261 | return 0; |
| 262 | } |
| 263 | |
| 264 | int lan7x_update_flowcontrol(struct usb_device *udev, |
| 265 | struct ueth_data *dev, |
| 266 | uint32_t *flow, uint32_t *fct_flow) |
| 267 | { |
| 268 | uint32_t lcladv, rmtadv; |
| 269 | u8 cap = 0; |
| 270 | struct lan7x_private *priv = dev_get_priv(udev->dev); |
| 271 | |
| 272 | debug("** %s()\n", __func__); |
| 273 | debug("** %s() priv->phydev->speed %i duplex %i\n", __func__, |
| 274 | priv->phydev->speed, priv->phydev->duplex); |
| 275 | |
| 276 | if (priv->phydev->duplex == DUPLEX_FULL) { |
| 277 | lcladv = lan7x_mdio_read(udev, dev->phy_id, MII_ADVERTISE); |
| 278 | rmtadv = lan7x_mdio_read(udev, dev->phy_id, MII_LPA); |
| 279 | cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); |
| 280 | |
| 281 | debug("TX Flow "); |
| 282 | if (cap & FLOW_CTRL_TX) { |
| 283 | *flow = (FLOW_CR_TX_FCEN | 0xFFFF); |
| 284 | /* set fct_flow thresholds to 20% and 80% */ |
| 285 | *fct_flow = ((MAX_RX_FIFO_SIZE * 2) / (10 * 512)) |
| 286 | & 0x7FUL; |
| 287 | *fct_flow <<= 8UL; |
| 288 | *fct_flow |= ((MAX_RX_FIFO_SIZE * 8) / (10 * 512)) |
| 289 | & 0x7FUL; |
| 290 | debug("EN "); |
| 291 | } else { |
| 292 | debug("DIS "); |
| 293 | } |
| 294 | debug("RX Flow "); |
| 295 | if (cap & FLOW_CTRL_RX) { |
| 296 | *flow |= FLOW_CR_RX_FCEN; |
| 297 | debug("EN"); |
| 298 | } else { |
| 299 | debug("DIS"); |
| 300 | } |
| 301 | } |
| 302 | debug("\n"); |
| 303 | return 0; |
| 304 | } |
| 305 | |
| 306 | int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev) |
| 307 | { |
| 308 | int ret; |
| 309 | |
| 310 | memset(enetaddr, 0, 6); |
| 311 | |
| 312 | ret = lan7x_read_eeprom(udev, 0, 1, enetaddr); |
| 313 | |
| 314 | if ((ret == 0) && (enetaddr[0] == EEPROM_INDICATOR)) { |
| 315 | ret = lan7x_read_eeprom(udev, |
| 316 | EEPROM_MAC_OFFSET, ETH_ALEN, |
| 317 | enetaddr); |
| 318 | if ((ret == 0) && is_valid_ethaddr(enetaddr)) { |
| 319 | /* eeprom values are valid so use them */ |
| 320 | debug("MAC address read from EEPROM %pM\n", |
| 321 | enetaddr); |
| 322 | return 0; |
| 323 | } |
| 324 | } |
| 325 | debug("MAC address read from EEPROM invalid %pM\n", enetaddr); |
| 326 | |
| 327 | memset(enetaddr, 0, 6); |
| 328 | return -EINVAL; |
| 329 | } |
| 330 | |
| 331 | int lan7x_pmt_phy_reset(struct usb_device *udev, |
| 332 | struct ueth_data *dev) |
| 333 | { |
| 334 | int ret; |
| 335 | u32 data; |
| 336 | |
| 337 | ret = lan7x_read_reg(udev, PMT_CTL, &data); |
| 338 | if (ret) |
| 339 | return ret; |
| 340 | ret = lan7x_write_reg(udev, PMT_CTL, data | PMT_CTL_PHY_RST); |
| 341 | if (ret) |
| 342 | return ret; |
| 343 | |
| 344 | /* for LAN7x, we need to check PMT_CTL_READY asserted */ |
| 345 | ret = lan7x_wait_for_bit(udev, "PMT_CTL_PHY_RST", |
| 346 | PMT_CTL, PMT_CTL_PHY_RST, |
| 347 | false, 1000, 0); /* could take over 125mS */ |
| 348 | if (ret) |
| 349 | return ret; |
| 350 | |
| 351 | return lan7x_wait_for_bit(udev, "PMT_CTL_READY", |
| 352 | PMT_CTL, PMT_CTL_READY, |
| 353 | true, 1000, 0); |
| 354 | } |
| 355 | |
| 356 | int lan7x_basic_reset(struct usb_device *udev, |
| 357 | struct ueth_data *dev) |
| 358 | { |
| 359 | int ret; |
| 360 | |
| 361 | dev->phy_id = LAN7X_INTERNAL_PHY_ID; /* fixed phy id */ |
| 362 | |
| 363 | ret = lan7x_write_reg(udev, HW_CFG, HW_CFG_LRST); |
| 364 | if (ret) |
| 365 | return ret; |
| 366 | |
| 367 | ret = lan7x_wait_for_bit(udev, "HW_CFG_LRST", |
| 368 | HW_CFG, HW_CFG_LRST, |
| 369 | false, 1000, 0); |
| 370 | if (ret) |
| 371 | return ret; |
| 372 | |
| 373 | debug("USB devnum %d portnr %d\n", udev->devnum, udev->portnr); |
| 374 | |
| 375 | return lan7x_pmt_phy_reset(udev, dev); |
| 376 | } |
| 377 | |
| 378 | void lan7x_eth_stop(struct udevice *dev) |
| 379 | { |
| 380 | debug("** %s()\n", __func__); |
| 381 | } |
| 382 | |
| 383 | int lan7x_eth_send(struct udevice *dev, void *packet, int length) |
| 384 | { |
| 385 | struct lan7x_private *priv = dev_get_priv(dev); |
| 386 | struct ueth_data *ueth = &priv->ueth; |
| 387 | int err; |
| 388 | int actual_len; |
| 389 | u32 tx_cmd_a; |
| 390 | u32 tx_cmd_b; |
| 391 | ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg, |
| 392 | PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)); |
| 393 | |
| 394 | debug("** %s(), len %d, buf %#x\n", __func__, length, |
| 395 | (unsigned int)(ulong) msg); |
| 396 | if (length > PKTSIZE) |
| 397 | return -ENOSPC; |
| 398 | |
| 399 | /* LAN7x disable all TX offload features for u-boot */ |
| 400 | tx_cmd_a = (u32) (length & TX_CMD_A_LEN_MASK) | TX_CMD_A_FCS; |
| 401 | tx_cmd_b = 0; |
| 402 | cpu_to_le32s(&tx_cmd_a); |
| 403 | cpu_to_le32s(&tx_cmd_b); |
| 404 | |
| 405 | /* prepend cmd_a and cmd_b */ |
| 406 | memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a)); |
| 407 | memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b)); |
| 408 | memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet, |
| 409 | length); |
| 410 | err = usb_bulk_msg(ueth->pusb_dev, |
| 411 | usb_sndbulkpipe(ueth->pusb_dev, ueth->ep_out), |
| 412 | (void *)msg, |
| 413 | length + sizeof(tx_cmd_a) + |
| 414 | sizeof(tx_cmd_b), |
| 415 | &actual_len, USB_BULK_SEND_TIMEOUT_MS); |
| 416 | debug("Tx: len = %u, actual = %u, err = %d\n", |
| 417 | (unsigned int)(length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)), |
| 418 | (unsigned int)actual_len, err); |
| 419 | |
| 420 | return err; |
| 421 | } |
| 422 | |
| 423 | int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp) |
| 424 | { |
| 425 | struct lan7x_private *priv = dev_get_priv(dev); |
| 426 | struct ueth_data *ueth = &priv->ueth; |
| 427 | uint8_t *ptr; |
| 428 | int ret, len; |
| 429 | u32 packet_len = 0; |
| 430 | u32 rx_cmd_a = 0; |
| 431 | |
| 432 | len = usb_ether_get_rx_bytes(ueth, &ptr); |
| 433 | debug("%s: first try, len=%d\n", __func__, len); |
| 434 | if (!len) { |
| 435 | if (!(flags & ETH_RECV_CHECK_DEVICE)) |
| 436 | return -EAGAIN; |
| 437 | ret = usb_ether_receive(ueth, RX_URB_SIZE); |
| 438 | if (ret == -EAGAIN) |
| 439 | return ret; |
| 440 | |
| 441 | len = usb_ether_get_rx_bytes(ueth, &ptr); |
| 442 | debug("%s: second try, len=%d\n", __func__, len); |
| 443 | } |
| 444 | |
| 445 | /* |
| 446 | * 1st 4 bytes contain the length of the actual data plus error info. |
| 447 | * Extract data length. |
| 448 | */ |
| 449 | if (len < sizeof(packet_len)) { |
| 450 | debug("Rx: incomplete packet length\n"); |
| 451 | goto err; |
| 452 | } |
| 453 | memcpy(&rx_cmd_a, ptr, sizeof(rx_cmd_a)); |
| 454 | le32_to_cpus(&rx_cmd_a); |
| 455 | if (rx_cmd_a & RX_CMD_A_RXE) { |
| 456 | debug("Rx: Error header=%#x", rx_cmd_a); |
| 457 | goto err; |
| 458 | } |
| 459 | packet_len = (u16) (rx_cmd_a & RX_CMD_A_LEN_MASK); |
| 460 | |
| 461 | if (packet_len > len - sizeof(packet_len)) { |
| 462 | debug("Rx: too large packet: %d\n", packet_len); |
| 463 | goto err; |
| 464 | } |
| 465 | |
| 466 | /* |
| 467 | * For LAN7x, the length in command A does not |
| 468 | * include command A, B, and C length. |
| 469 | * So use it as is. |
| 470 | */ |
| 471 | |
| 472 | *packetp = ptr + 10; |
| 473 | return packet_len; |
| 474 | |
| 475 | err: |
| 476 | usb_ether_advance_rxbuf(ueth, -1); |
| 477 | return -EINVAL; |
| 478 | } |
| 479 | |
| 480 | int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len) |
| 481 | { |
| 482 | struct lan7x_private *priv = dev_get_priv(dev); |
| 483 | |
| 484 | packet_len = ALIGN(packet_len, 4); |
| 485 | usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len); |
| 486 | |
| 487 | return 0; |
| 488 | } |
| 489 | |
| 490 | int lan7x_eth_remove(struct udevice *dev) |
| 491 | { |
| 492 | struct lan7x_private *priv = dev_get_priv(dev); |
| 493 | |
| 494 | debug("** %s()\n", __func__); |
| 495 | free(priv->phydev); |
| 496 | mdio_unregister(priv->mdiobus); |
| 497 | mdio_free(priv->mdiobus); |
| 498 | |
| 499 | return 0; |
| 500 | } |