blob: 9c3ea883ff34d5d570a1d110430b963d10c73e8a [file] [log] [blame]
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +05301/*
2 * Copyright (C) 2013 Samsung Electronics
3 *
4 * Configuration settings for the SAMSUNG EXYNOS5 board.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
Simon Glass4c7bb1d2014-10-07 22:01:44 -06009#ifndef __CONFIG_EXYNOS5_COMMON_H
10#define __CONFIG_EXYNOS5_COMMON_H
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053011
Simon Glass5ea01ab2014-10-07 22:01:45 -060012#define CONFIG_EXYNOS5 /* Exynos5 Family */
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053013
Simon Glass5ea01ab2014-10-07 22:01:45 -060014#include "exynos-common.h"
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053015
Simon Glass5ea01ab2014-10-07 22:01:45 -060016#define CONFIG_SYS_CACHELINE_SIZE 64
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053017#define CONFIG_EXYNOS_SPL
18
Inha Songf44ef7d2015-03-13 17:48:35 +090019#ifdef FTRACE
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053020#define CONFIG_TRACE
21#define CONFIG_CMD_TRACE
22#define CONFIG_TRACE_BUFFER_SIZE (16 << 20)
23#define CONFIG_TRACE_EARLY_SIZE (8 << 20)
24#define CONFIG_TRACE_EARLY
25#define CONFIG_TRACE_EARLY_ADDR 0x50000000
Inha Songf44ef7d2015-03-13 17:48:35 +090026#endif
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053027
28/* Enable ACE acceleration for SHA1 and SHA256 */
29#define CONFIG_EXYNOS_ACE_SHA
30#define CONFIG_SHA_HW_ACCEL
31
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053032/* Power Down Modes */
33#define S5P_CHECK_SLEEP 0x00000BAD
34#define S5P_CHECK_DIDLE 0xBAD00000
35#define S5P_CHECK_LPA 0xABAD0000
36
37/* Offset for inform registers */
38#define INFORM0_OFFSET 0x800
39#define INFORM1_OFFSET 0x804
40#define INFORM2_OFFSET 0x808
41#define INFORM3_OFFSET 0x80c
42
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053043/* select serial console configuration */
44#define CONFIG_BAUDRATE 115200
45#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
46#define CONFIG_SILENT_CONSOLE
Simon Glass5ea01ab2014-10-07 22:01:45 -060047#define CONFIG_SYS_CONSOLE_IS_IN_ENV
48#define CONFIG_CONSOLE_MUX
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053049
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053050#define CONFIG_CMD_HASH
51
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053052/* Thermal Management Unit */
53#define CONFIG_EXYNOS_TMU
54#define CONFIG_CMD_DTT
55#define CONFIG_TMU_CMD_DTT
56
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053057/* MMC SPL */
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053058#define COPY_BL2_FNPTR_ADDR 0x02020030
Simon Glass5ea01ab2014-10-07 22:01:45 -060059#define CONFIG_SUPPORT_EMMC_BOOT
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053060
61#define CONFIG_SPL_LIBCOMMON_SUPPORT
62#define CONFIG_SPL_GPIO_SUPPORT
Simon Glassd4061aa2015-08-03 08:19:28 -060063#define CONFIG_SPL_SERIAL_SUPPORT
64#define CONFIG_SPL_LIBGENERIC_SUPPORT
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053065
66/* specific .lds file */
67#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053068
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053069/* Boot Argument Buffer Size */
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053070/* memtest works on */
71#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
72#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
73#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
74
75#define CONFIG_RD_LVL
76
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053077#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
78#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
79#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
80#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
81#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
82#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
83#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
84#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
85#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
86#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
87#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
88#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
89#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
90#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
91#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
92#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
93
94#define CONFIG_SYS_MONITOR_BASE 0x00000000
95
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +053096#define CONFIG_SYS_MMC_ENV_DEV 0
97
98#define CONFIG_SECURE_BL1_ONLY
99
100/* Secure FW size configuration */
101#ifdef CONFIG_SECURE_BL1_ONLY
102#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
103#else
104#define CONFIG_SEC_FW_SIZE 0
105#endif
106
107/* Configuration of BL1, BL2, ENV Blocks on mmc */
108#define CONFIG_RES_BLOCK_SIZE (512)
109#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
110#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
111#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
112
113#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
114#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
Akshay Saraswatfa253152014-06-18 17:53:59 +0530115
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530116/* U-boot copy size from boot Media to DRAM.*/
117#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
118#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
119
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530120#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
121#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
122
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530123/* I2C */
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530124#define CONFIG_CMD_I2C
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530125#define CONFIG_SYS_I2C_S3C24X0
Przemyslaw Marczak189d8012015-01-27 13:36:39 +0100126#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530127#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0
128#define CONFIG_I2C_EDID
129
130/* SPI */
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530131#ifdef CONFIG_SPI_FLASH
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530132#define CONFIG_CMD_SF
133#define CONFIG_CMD_SPI
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530134#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
135#define CONFIG_SF_DEFAULT_SPEED 50000000
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530136#endif
137
138#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
139#define CONFIG_ENV_SPI_MODE SPI_MODE_0
140#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
141#define CONFIG_ENV_SPI_BUS 1
142#define CONFIG_ENV_SPI_MAX_HZ 50000000
143#endif
144
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530145/* Ethernet Controllor Driver */
146#ifdef CONFIG_CMD_NET
147#define CONFIG_SMC911X
148#define CONFIG_SMC911X_BASE 0x5000000
149#define CONFIG_SMC911X_16_BIT
150#define CONFIG_ENV_SROM_BANK 1
151#endif /*CONFIG_CMD_NET*/
152
Rajeshwari Birje76dd9b62013-12-26 09:44:26 +0530153/* SHA hashing */
154#define CONFIG_CMD_HASH
155#define CONFIG_HASH_VERIFY
156#define CONFIG_SHA1
157#define CONFIG_SHA256
158
159/* Enable Time Command */
160#define CONFIG_CMD_TIME
161
Akshay Saraswat9b97b722014-05-13 10:30:15 +0530162
Sjoerd Simons66223782014-12-29 22:17:10 +0100163/* USB */
164#define CONFIG_CMD_USB
165#define CONFIG_USB_STORAGE
Ramneek Mehresh552d60c2015-05-29 14:47:16 +0530166#define CONFIG_USB_XHCI_DWC3
Sjoerd Simons66223782014-12-29 22:17:10 +0100167#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
168#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
169
170#define CONFIG_USB_HOST_ETHER
171#define CONFIG_USB_ETHER_ASIX
172#define CONFIG_USB_ETHER_SMSC95XX
173
Akshay Saraswat582693b2014-06-18 17:54:01 +0530174/* USB boot mode */
175#define CONFIG_USB_BOOTING
176#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070
177#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
178#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
179
Simon Glass5ea01ab2014-10-07 22:01:45 -0600180/* Enable FIT support and comparison */
181#define CONFIG_FIT
182#define CONFIG_FIT_BEST_MATCH
183
Ian Campbelle6825e02014-11-09 10:44:32 +0000184#define BOOT_TARGET_DEVICES(func) \
185 func(MMC, mmc, 1) \
186 func(MMC, mmc, 0) \
187 func(PXE, pxe, na) \
188 func(DHCP, dhcp, na)
189
190#include <config_distro_bootcmd.h>
191
192#ifndef MEM_LAYOUT_ENV_SETTINGS
193/* 2GB RAM, bootm size of 256M, load scripts after that */
194#define MEM_LAYOUT_ENV_SETTINGS \
195 "bootm_size=0x10000000\0" \
196 "kernel_addr_r=0x42000000\0" \
197 "fdt_addr_r=0x43000000\0" \
198 "ramdisk_addr_r=0x43300000\0" \
199 "scriptaddr=0x50000000\0" \
200 "pxefile_addr_r=0x51000000\0"
201#endif
202
203#ifndef EXYNOS_DEVICE_SETTINGS
204#define EXYNOS_DEVICE_SETTINGS \
205 "stdin=serial\0" \
206 "stdout=serial\0" \
207 "stderr=serial\0"
208#endif
209
210#ifndef EXYNOS_FDTFILE_SETTING
211#define EXYNOS_FDTFILE_SETTING
212#endif
213
214#define CONFIG_EXTRA_ENV_SETTINGS \
215 EXYNOS_DEVICE_SETTINGS \
216 EXYNOS_FDTFILE_SETTING \
217 MEM_LAYOUT_ENV_SETTINGS \
218 BOOTENV
219
Simon Glass4c7bb1d2014-10-07 22:01:44 -0600220#endif /* __CONFIG_EXYNOS5_COMMON_H */