Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 637425bab338c1aa7b83f68068dbf5ad398d53af / . / arch / arm / dts / k3-j721e-beagleboneai64.dts
blob: 2f954729f3533876e096735cf5a4f3afe617e2a5 [file] [log] [blame]
Robert Nelson7f786362023-11-04 03:11:00 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2/*
3 * https://beagleboard.org/ai-64
4 * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
5 * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation
6 * Copyright (C) 2022 Robert Nelson, BeagleBoard.org Foundation
7 */
8
9/dts-v1/;
10
11#include "k3-j721e.dtsi"
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/input/input.h>
14#include <dt-bindings/leds/common.h>
15#include <dt-bindings/net/ti-dp83867.h>
16#include <dt-bindings/phy/phy-cadence.h>
17
18/ {
19 compatible = "beagle,j721e-beagleboneai64", "ti,j721e";
20 model = "BeagleBoard.org BeagleBone AI-64";
21
22 aliases {
23 serial0 = &wkup_uart0;
24 serial2 = &main_uart0;
25 mmc0 = &main_sdhci0;
26 mmc1 = &main_sdhci1;
27 i2c0 = &wkup_i2c0;
28 i2c1 = &main_i2c6;
29 i2c2 = &main_i2c2;
30 i2c3 = &main_i2c4;
31 };
32
33 chosen {
34 stdout-path = "serial2:115200n8";
35 };
36
37 memory@80000000 {
38 device_type = "memory";
39 /* 4G RAM */
40 reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
41 <0x00000008 0x80000000 0x00000000 0x80000000>;
42 };
43
44 reserved_memory: reserved-memory {
45 #address-cells = <2>;
46 #size-cells = <2>;
47 ranges;
48
49 secure_ddr: optee@9e800000 {
50 reg = <0x00 0x9e800000 0x00 0x01800000>;
51 no-map;
52 };
53
54 mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
55 compatible = "shared-dma-pool";
56 reg = <0x00 0xa0000000 0x00 0x100000>;
57 no-map;
58 };
59
60 mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
61 compatible = "shared-dma-pool";
62 reg = <0x00 0xa0100000 0x00 0xf00000>;
63 no-map;
64 };
65
66 mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
67 compatible = "shared-dma-pool";
68 reg = <0x00 0xa1000000 0x00 0x100000>;
69 no-map;
70 };
71
72 mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
73 compatible = "shared-dma-pool";
74 reg = <0x00 0xa1100000 0x00 0xf00000>;
75 no-map;
76 };
77
78 main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
79 compatible = "shared-dma-pool";
80 reg = <0x00 0xa2000000 0x00 0x100000>;
81 no-map;
82 };
83
84 main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
85 compatible = "shared-dma-pool";
86 reg = <0x00 0xa2100000 0x00 0xf00000>;
87 no-map;
88 };
89
90 main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
91 compatible = "shared-dma-pool";
92 reg = <0x00 0xa3000000 0x00 0x100000>;
93 no-map;
94 };
95
96 main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
97 compatible = "shared-dma-pool";
98 reg = <0x00 0xa3100000 0x00 0xf00000>;
99 no-map;
100 };
101
102 main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
103 compatible = "shared-dma-pool";
104 reg = <0x00 0xa4000000 0x00 0x100000>;
105 no-map;
106 };
107
108 main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
109 compatible = "shared-dma-pool";
110 reg = <0x00 0xa4100000 0x00 0xf00000>;
111 no-map;
112 };
113
114 main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
115 compatible = "shared-dma-pool";
116 reg = <0x00 0xa5000000 0x00 0x100000>;
117 no-map;
118 };
119
120 main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
121 compatible = "shared-dma-pool";
122 reg = <0x00 0xa5100000 0x00 0xf00000>;
123 no-map;
124 };
125
126 c66_1_dma_memory_region: c66-dma-memory@a6000000 {
127 compatible = "shared-dma-pool";
128 reg = <0x00 0xa6000000 0x00 0x100000>;
129 no-map;
130 };
131
132 c66_0_memory_region: c66-memory@a6100000 {
133 compatible = "shared-dma-pool";
134 reg = <0x00 0xa6100000 0x00 0xf00000>;
135 no-map;
136 };
137
138 c66_0_dma_memory_region: c66-dma-memory@a7000000 {
139 compatible = "shared-dma-pool";
140 reg = <0x00 0xa7000000 0x00 0x100000>;
141 no-map;
142 };
143
144 c66_1_memory_region: c66-memory@a7100000 {
145 compatible = "shared-dma-pool";
146 reg = <0x00 0xa7100000 0x00 0xf00000>;
147 no-map;
148 };
149
150 c71_0_dma_memory_region: c71-dma-memory@a8000000 {
151 compatible = "shared-dma-pool";
152 reg = <0x00 0xa8000000 0x00 0x100000>;
153 no-map;
154 };
155
156 c71_0_memory_region: c71-memory@a8100000 {
157 compatible = "shared-dma-pool";
158 reg = <0x00 0xa8100000 0x00 0xf00000>;
159 no-map;
160 };
161
162 rtos_ipc_memory_region: ipc-memories@aa000000 {
163 reg = <0x00 0xaa000000 0x00 0x01c00000>;
164 alignment = <0x1000>;
165 no-map;
166 };
167 };
168
169 gpio_keys: gpio-keys {
170 compatible = "gpio-keys";
171 pinctrl-names = "default";
172 pinctrl-0 = <&sw_pwr_pins_default>;
173
174 button-1 {
175 label = "BOOT";
176 linux,code = <BTN_0>;
177 gpios = <&wkup_gpio0 0 GPIO_ACTIVE_LOW>;
178 };
179
180 button-2 {
181 label = "POWER";
182 linux,code = <KEY_POWER>;
183 gpios = <&wkup_gpio0 4 GPIO_ACTIVE_LOW>;
184 };
185 };
186
187 leds {
188 compatible = "gpio-leds";
189 pinctrl-names = "default";
190 pinctrl-0 = <&led_pins_default>;
191
192 led-0 {
193 gpios = <&main_gpio0 96 GPIO_ACTIVE_HIGH>;
194 function = LED_FUNCTION_HEARTBEAT;
195 linux,default-trigger = "heartbeat";
196 };
197
198 led-1 {
199 gpios = <&main_gpio0 95 GPIO_ACTIVE_HIGH>;
200 function = LED_FUNCTION_DISK_ACTIVITY;
201 linux,default-trigger = "mmc0";
202 };
203
204 led-2 {
205 gpios = <&main_gpio0 97 GPIO_ACTIVE_HIGH>;
206 function = LED_FUNCTION_CPU;
207 linux,default-trigger = "cpu";
208 };
209
210 led-3 {
211 gpios = <&main_gpio0 110 GPIO_ACTIVE_HIGH>;
212 function = LED_FUNCTION_DISK_ACTIVITY;
213 linux,default-trigger = "mmc1";
214 };
215
216 led-4 {
217 gpios = <&main_gpio0 109 GPIO_ACTIVE_HIGH>;
218 function = LED_FUNCTION_WLAN;
219 default-state = "off";
220 };
221 };
222
223 evm_12v0: regulator-0 {
224 /* main supply */
225 compatible = "regulator-fixed";
226 regulator-name = "evm_12v0";
227 regulator-min-microvolt = <12000000>;
228 regulator-max-microvolt = <12000000>;
229 regulator-always-on;
230 regulator-boot-on;
231 };
232
233 vsys_3v3: regulator-1 {
234 /* Output of LMS140 */
235 compatible = "regulator-fixed";
236 regulator-name = "vsys_3v3";
237 regulator-min-microvolt = <3300000>;
238 regulator-max-microvolt = <3300000>;
239 vin-supply = <&evm_12v0>;
240 regulator-always-on;
241 regulator-boot-on;
242 };
243
244 vsys_5v0: regulator-2 {
245 /* Output of LM5140 */
246 compatible = "regulator-fixed";
247 regulator-name = "vsys_5v0";
248 regulator-min-microvolt = <5000000>;
249 regulator-max-microvolt = <5000000>;
250 vin-supply = <&evm_12v0>;
251 regulator-always-on;
252 regulator-boot-on;
253 };
254
255 vdd_mmc1: regulator-3 {
256 compatible = "regulator-fixed";
257 pinctrl-names = "default";
258 pinctrl-0 = <&sd_pwr_en_pins_default>;
259 regulator-name = "vdd_mmc1";
260 regulator-min-microvolt = <3300000>;
261 regulator-max-microvolt = <3300000>;
262 regulator-boot-on;
263 enable-active-high;
264 vin-supply = <&vsys_3v3>;
265 gpio = <&main_gpio0 82 GPIO_ACTIVE_HIGH>;
266 };
267
268 vdd_sd_dv_alt: regulator-4 {
269 compatible = "regulator-gpio";
270 pinctrl-names = "default";
271 pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
272 regulator-name = "tlv71033";
273 regulator-min-microvolt = <1800000>;
274 regulator-max-microvolt = <3300000>;
275 regulator-boot-on;
276 vin-supply = <&vsys_5v0>;
277 gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
278 states = <1800000 0x0>,
279 <3300000 0x1>;
280 };
281
282 dp_pwr_3v3: regulator-5 {
283 compatible = "regulator-fixed";
284 pinctrl-names = "default";
285 pinctrl-0 = <&dp0_3v3_en_pins_default>;
286 regulator-name = "dp-pwr";
287 regulator-min-microvolt = <3300000>;
288 regulator-max-microvolt = <3300000>;
289 gpio = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; /* DP0_PWR_SW_EN */
290 enable-active-high;
291 };
292
293 dp0: connector {
294 compatible = "dp-connector";
295 label = "DP0";
296 type = "full-size";
297 dp-pwr-supply = <&dp_pwr_3v3>;
298
299 port {
300 dp_connector_in: endpoint {
301 remote-endpoint = <&dp0_out>;
302 };
303 };
304 };
305};
306
307&main_pmx0 {
308 led_pins_default: led-default-pins {
309 pinctrl-single,pins = <
310 J721E_IOPAD(0x184, PIN_INPUT, 7) /* (T23) RGMII5_RD0.GPIO0_96 */
311 J721E_IOPAD(0x180, PIN_INPUT, 7) /* (R23) RGMII5_RD1.GPIO0_95 */
312 J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
313 J721E_IOPAD(0x1bc, PIN_INPUT, 7) /* (V24) MDIO0_MDC.GPIO0_110 */
314 J721E_IOPAD(0x1b8, PIN_INPUT, 7) /* (V26) MDIO0_MDIO.GPIO0_109 */
315 >;
316 };
317
318 main_mmc1_pins_default: main-mmc1-default-pins {
319 pinctrl-single,pins = <
320 J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
321 J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
322 J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
323 J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
324 J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
325 J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
326 J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
327 J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
328 >;
329 };
330
331 main_uart0_pins_default: main-uart0-default-pins {
332 pinctrl-single,pins = <
333 J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
334 J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
335 >;
336 };
337
338 sd_pwr_en_pins_default: sd-pwr-en-default-pins {
339 pinctrl-single,pins = <
340 J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
341 >;
342 };
343
344 vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins {
345 pinctrl-single,pins = <
346 J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
347 >;
348 };
349
350 main_usbss0_pins_default: main-usbss0-default-pins {
351 pinctrl-single,pins = <
352 J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 - USBC_DIR */
353 >;
354 };
355
356 main_usbss1_pins_default: main-usbss1-default-pins {
357 pinctrl-single,pins = <
358 J721E_IOPAD(0x290, INPUT_DISABLE, 1) /* (U6) USB0_DRVVBUS.USB1_DRVVBUS */
359 >;
360 };
361
362 dp0_3v3_en_pins_default:dp0-3v3-en-default-pins {
363 pinctrl-single,pins = <
364 J721E_IOPAD(0xc8, PIN_INPUT, 7) /* (AE26) PRG0_PRU0_GPO6.GPIO0_49 */
365 >;
366 };
367
368 dp0_pins_default: dp0-default-pins {
369 pinctrl-single,pins = <
370 J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* (Y4) SPI0_CS1.DP0_HPD */
371 >;
372 };
373
374 main_i2c0_pins_default: main-i2c0-default-pins {
375 pinctrl-single,pins = <
376 J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
377 J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
378 >;
379 };
380
381 main_i2c1_pins_default: main-i2c1-default-pins {
382 pinctrl-single,pins = <
383 J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
384 J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
385 >;
386 };
387
388 main_i2c2_pins_default: main-i2c2-default-pins {
389 pinctrl-single,pins = <
390 J721E_IOPAD(0x208, PIN_INPUT_PULLUP, 4) /* (W5) MCAN0_RX.I2C2_SCL */
391 J721E_IOPAD(0x20c, PIN_INPUT_PULLUP, 4) /* (W6) MCAN0_TX.I2C2_SDA */
392 J721E_IOPAD(0x138, PIN_INPUT, 7) /* (AE25) PRG0_PRU1_GPO14.GPIO0_77 */
393 J721E_IOPAD(0x13c, PIN_INPUT, 7) /* (AF29) PRG0_PRU1_GPO15.GPIO0_78 */
394 >;
395 };
396
397 main_i2c3_pins_default: main-i2c3-default-pins {
398 pinctrl-single,pins = <
399 J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
400 J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
401 >;
402 };
403
404 main_i2c4_pins_default: main-i2c4-default-pins {
405 pinctrl-single,pins = <
406 J721E_IOPAD(0x1e0, PIN_INPUT_PULLUP, 2) /* (Y5) SPI1_D0.I2C4_SCL */
407 J721E_IOPAD(0x1dc, PIN_INPUT_PULLUP, 2) /* (Y1) SPI1_CLK.I2C4_SDA */
408 J721E_IOPAD(0x30, PIN_INPUT, 7) /* (AF24) PRG1_PRU0_GPO11.GPIO0_12 */
409 J721E_IOPAD(0x34, PIN_INPUT, 7) /* (AJ24) PRG1_PRU0_GPO12.GPIO0_13 */
410 >;
411 };
412
413 main_i2c5_pins_default: main-i2c5-default-pins {
414 pinctrl-single,pins = <
415 J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
416 J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
417 >;
418 };
419
420 main_i2c6_pins_default: main-i2c6-default-pins {
421 pinctrl-single,pins = <
422 J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
423 J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
424 J721E_IOPAD(0x74, PIN_INPUT, 7) /* (AC21) PRG1_PRU1_GPO7.GPIO0_28 */
425 J721E_IOPAD(0xa4, PIN_INPUT, 7) /* (AH22) PRG1_PRU1_GPO19.GPIO0_40 */
426 >;
427 };
428
429 csi0_gpio_pins_default: csi0-gpio-default-pins {
430 pinctrl-single,pins = <
431 J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
432 J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
433 >;
434 };
435
436 csi1_gpio_pins_default: csi1-gpio-default-pins {
437 pinctrl-single,pins = <
438 J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
439 J721E_IOPAD(0x1b0, PIN_INPUT_PULLDOWN, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
440 >;
441 };
442
443 pcie1_rst_pins_default: pcie1-rst-default-pins {
444 pinctrl-single,pins = <
445 J721E_IOPAD(0x5c, PIN_INPUT, 7) /* (AG23) PRG1_PRU1_GPO1.GPIO0_22 */
446 >;
447 };
448};
449
450&wkup_pmx0 {
451 eeprom_wp_pins_default: eeprom-wp-default-pins {
452 pinctrl-single,pins = <
453 J721E_WKUP_IOPAD(0xc4, PIN_OUTPUT_PULLUP, 7) /* (G24) WKUP_GPIO0_5 */
454 >;
455 };
456
457 mcu_adc0_pins_default: mcu-adc0-default-pins {
458 pinctrl-single,pins = <
459 J721E_WKUP_IOPAD(0x130, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN0 */
460 J721E_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (K26) MCU_ADC0_AIN1 */
461 J721E_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K28) MCU_ADC0_AIN2 */
462 J721E_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (L28) MCU_ADC0_AIN3 */
463 J721E_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN4 */
464 J721E_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (K27) MCU_ADC0_AIN5 */
465 J721E_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K29) MCU_ADC0_AIN6 */
466 >;
467 };
468
469 mcu_adc1_pins_default: mcu-adc1-default-pins {
470 pinctrl-single,pins = <
471 J721E_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (N23) MCU_ADC1_AIN0 */
472 >;
473 };
474
475 mikro_bus_pins_default: mikro-bus-default-pins {
476 pinctrl-single,pins = <
477 J721E_WKUP_IOPAD(0x108, PIN_INPUT, 7) /* SDAPULLEN (E26) PMIC_POWER_EN0.WKUP_GPIO0_66 */
478 J721E_WKUP_IOPAD(0xd4, PIN_INPUT, 7) /* SDA (G26) WKUP_GPIO0_9.MCU_I2C1_SDA */
479 J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 7) /* SDA (D25) MCU_I3C0_SDA.WKUP_GPIO0_61 */
480 J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* SCL (G27) WKUP_GPIO0_8.MCU_I2C1_SCL */
481 J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 7) /* SCL (D26) MCU_I3C0_SCL.WKUP_GPIO0_60 */
482
483 J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* MOSI (F28) WKUP_GPIO0_2.MCU_SPI1_D1 */
484 J721E_WKUP_IOPAD(0xb4, PIN_INPUT, 7) /* MISO (F25) WKUP_GPIO0_1.MCU_SPI1_D0 */
485 J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* CLK (F26) WKUP_GPIO0_0.MCU_SPI1_CLK */
486 J721E_WKUP_IOPAD(0xbc, PIN_INPUT, 7) /* CS (F27) WKUP_GPIO0_3.MCU_SPI1_CS0 */
487
488 J721E_WKUP_IOPAD(0x44, PIN_INPUT, 7) /* RX (G22) MCU_OSPI1_D1.WKUP_GPIO0_33 */
489 J721E_WKUP_IOPAD(0x48, PIN_INPUT, 7) /* TX (D23) MCU_OSPI1_D2.WKUP_GPIO0_34 */
490
491 J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 7) /* INT (C23) MCU_OSPI1_D3.WKUP_GPIO0_35 */
492 J721E_WKUP_IOPAD(0x54, PIN_INPUT, 7) /* RST (E22) MCU_OSPI1_CSn1.WKUP_GPIO0_37 */
493 J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* PWM (H27) WKUP_GPIO0_11 */
494 J721E_WKUP_IOPAD(0xac, PIN_INPUT, 7) /* AN (C29) MCU_MCAN0_RX.WKUP_GPIO0_59 */
495 >;
496 };
497
498 mcu_cpsw_pins_default: mcu-cpsw-default-pins {
499 pinctrl-single,pins = <
500 J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
501 J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */
502 J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */
503 J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */
504 J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */
505 J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */
506 J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */
507 J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */
508 J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */
509 J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */
510 J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */
511 J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */
512 >;
513 };
514
515 mcu_mdio_pins_default: mcu-mdio1-default-pins {
516 pinctrl-single,pins = <
517 J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */
518 J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */
519 >;
520 };
521
522 sw_pwr_pins_default: sw-pwr-default-pins {
523 pinctrl-single,pins = <
524 J721E_WKUP_IOPAD(0xc0, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_4 */
525 >;
526 };
527
528 wkup_i2c0_pins_default: wkup-i2c0-default-pins {
529 pinctrl-single,pins = <
530 J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
531 J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
532 >;
533 };
534
535 wkup_uart0_pins_default: wkup-uart0-default-pins {
536 pinctrl-single,pins = <
537 J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
538 J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
539 >;
540 };
541
542 mcu_usbss1_pins_default: mcu-usbss1-default-pins {
543 pinctrl-single,pins = <
544 J721E_WKUP_IOPAD(0x3c, PIN_OUTPUT_PULLUP, 5) /* (A23) MCU_OSPI1_LBCLKO.WKUP_GPIO0_30 */
545 >;
546 };
547};
548
549&wkup_uart0 {
550 /* Wakeup UART is used by TIFS firmware. */
551 status = "reserved";
552 pinctrl-names = "default";
553 pinctrl-0 = <&wkup_uart0_pins_default>;
554};
555
556&main_uart0 {
557 status = "okay";
558 pinctrl-names = "default";
559 pinctrl-0 = <&main_uart0_pins_default>;
560 /* Shared with ATF on this platform */
561 power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
562};
563
564&main_sdhci0 {
565 /* eMMC */
566 status = "okay";
567 non-removable;
568 ti,driver-strength-ohm = <50>;
569 disable-wp;
570};
571
572&main_sdhci1 {
573 /* SD Card */
574 status = "okay";
575 vmmc-supply = <&vdd_mmc1>;
576 vqmmc-supply = <&vdd_sd_dv_alt>;
577 pinctrl-names = "default";
578 pinctrl-0 = <&main_mmc1_pins_default>;
579 ti,driver-strength-ohm = <50>;
580 disable-wp;
581};
582
583&main_i2c0 {
584 status = "okay";
585 pinctrl-names = "default";
586 pinctrl-0 = <&main_i2c0_pins_default>;
587 clock-frequency = <400000>;
588};
589
590&main_i2c1 {
591 status = "okay";
592 pinctrl-names = "default";
593 pinctrl-0 = <&main_i2c1_pins_default>;
594 clock-frequency = <400000>;
595};
596
597&main_i2c2 {
598 /* BBB Header: P9.19 and P9.20 */
599 status = "okay";
600 pinctrl-names = "default";
601 pinctrl-0 = <&main_i2c2_pins_default>;
602 clock-frequency = <100000>;
603};
604
605&main_i2c3 {
606 status = "okay";
607 pinctrl-names = "default";
608 pinctrl-0 = <&main_i2c3_pins_default>;
609 clock-frequency = <400000>;
610};
611
612&main_i2c4 {
613 /* BBB Header: P9.24 and P9.26 */
614 status = "okay";
615 pinctrl-names = "default";
616 pinctrl-0 = <&main_i2c4_pins_default>;
617 clock-frequency = <100000>;
618};
619
620&main_i2c5 {
621 status = "okay";
622 pinctrl-names = "default";
623 pinctrl-0 = <&main_i2c5_pins_default>;
624 clock-frequency = <400000>;
625};
626
627&main_i2c6 {
628 /* BBB Header: P9.17 and P9.18 */
629 status = "okay";
630 pinctrl-names = "default";
631 pinctrl-0 = <&main_i2c6_pins_default>;
632 clock-frequency = <100000>;
633 status = "okay";
634};
635
636&wkup_i2c0 {
637 status = "okay";
638 pinctrl-names = "default";
639 pinctrl-0 = <&wkup_i2c0_pins_default>;
640 clock-frequency = <400000>;
641
642 eeprom@50 {
643 compatible = "atmel,24c04";
644 reg = <0x50>;
645 pinctrl-names = "default";
646 pinctrl-0 = <&eeprom_wp_pins_default>;
647 };
648};
649
650&wkup_gpio0 {
651 status = "okay";
652 pinctrl-names = "default";
653 pinctrl-0 = <&mcu_adc0_pins_default>, <&mcu_adc1_pins_default>,
654 <&mikro_bus_pins_default>;
655};
656
657&main_gpio0 {
658 status = "okay";
659 pinctrl-names = "default";
660 pinctrl-0 = <&csi1_gpio_pins_default>, <&csi0_gpio_pins_default>;
661};
662
663&main_gpio1 {
664 status = "okay";
665};
666
667&usb_serdes_mux {
668 idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
669};
670
671&serdes_ln_ctrl {
672 idle-states = <J721E_SERDES0_LANE0_IP4_UNUSED>, <J721E_SERDES0_LANE1_IP4_UNUSED>,
673 <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
674 <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>,
675 <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
676 <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
677 <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
678};
679
680&serdes_wiz3 {
681 typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_LOW>;
682 typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */
683};
684
685&serdes3 {
686 serdes3_usb_link: phy@0 {
687 reg = <0>;
688 cdns,num-lanes = <2>;
689 #phy-cells = <0>;
690 cdns,phy-type = <PHY_TYPE_USB3>;
691 resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
692 };
693};
694
695&serdes4 {
696 torrent_phy_dp: phy@0 {
697 reg = <0>;
698 resets = <&serdes_wiz4 1>;
699 cdns,phy-type = <PHY_TYPE_DP>;
700 cdns,num-lanes = <4>;
701 cdns,max-bit-rate = <5400>;
702 #phy-cells = <0>;
703 };
704};
705
706&mhdp {
707 phys = <&torrent_phy_dp>;
708 phy-names = "dpphy";
709 pinctrl-names = "default";
710 pinctrl-0 = <&dp0_pins_default>;
711};
712
713&usbss0 {
714 pinctrl-names = "default";
715 pinctrl-0 = <&main_usbss0_pins_default>;
716 ti,vbus-divider;
717};
718
719&usb0 {
720 dr_mode = "peripheral";
721 maximum-speed = "super-speed";
722 phys = <&serdes3_usb_link>;
723 phy-names = "cdns3,usb3-phy";
724};
725
726&serdes2 {
727 serdes2_usb_link: phy@1 {
728 reg = <1>;
729 cdns,num-lanes = <1>;
730 #phy-cells = <0>;
731 cdns,phy-type = <PHY_TYPE_USB3>;
732 resets = <&serdes_wiz2 2>;
733 };
734};
735
736&usbss1 {
737 pinctrl-names = "default";
738 pinctrl-0 = <&main_usbss1_pins_default>, <&mcu_usbss1_pins_default>;
739 ti,vbus-divider;
740};
741
742&usb1 {
743 dr_mode = "host";
744 maximum-speed = "super-speed";
745 phys = <&serdes2_usb_link>;
746 phy-names = "cdns3,usb3-phy";
747};
748
749&tscadc0 {
750 status = "okay";
751 /* BBB Header: P9.39, P9.40, P9.37, P9.38, P9.33, P9.36, P9.35 */
752 adc {
753 ti,adc-channels = <0 1 2 3 4 5 6>;
754 };
755};
756
757&tscadc1 {
758 status = "okay";
759 /* MCU mikroBUS Header J10.1 - MCU_ADC1_AIN0 */
760 adc {
761 ti,adc-channels = <0>;
762 };
763};
764
765&mcu_cpsw {
766 pinctrl-names = "default";
767 pinctrl-0 = <&mcu_cpsw_pins_default>;
768};
769
770&davinci_mdio {
771 pinctrl-names = "default";
772 pinctrl-0 = <&mcu_mdio_pins_default>;
773
774 phy0: ethernet-phy@0 {
775 reg = <0>;
776 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
777 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
778 };
779};
780
781&cpsw_port1 {
782 phy-mode = "rgmii-rxid";
783 phy-handle = <&phy0>;
784};
785
786&dss {
787 /*
788 * These clock assignments are chosen to enable the following outputs:
789 *
790 * VP0 - DisplayPort SST
791 * VP1 - DPI0
792 * VP2 - DSI
793 * VP3 - DPI1
794 */
795
796 assigned-clocks = <&k3_clks 152 1>, /* VP 1 pixel clock */
797 <&k3_clks 152 4>, /* VP 2 pixel clock */
798 <&k3_clks 152 9>, /* VP 3 pixel clock */
799 <&k3_clks 152 13>; /* VP 4 pixel clock */
800 assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */
801 <&k3_clks 152 6>, /* PLL19_HSDIV0 */
802 <&k3_clks 152 11>, /* PLL18_HSDIV0 */
803 <&k3_clks 152 18>; /* PLL23_HSDIV0 */
804};
805
806&dss_ports {
807 port {
808 dpi0_out: endpoint {
809 remote-endpoint = <&dp0_in>;
810 };
811 };
812};
813
814&dp0_ports {
815 #address-cells = <1>;
816 #size-cells = <0>;
817
818 port@0 {
819 reg = <0>;
820 dp0_in: endpoint {
821 remote-endpoint = <&dpi0_out>;
822 };
823 };
824
825 port@4 {
826 reg = <4>;
827 dp0_out: endpoint {
828 remote-endpoint = <&dp_connector_in>;
829 };
830 };
831};
832
833&serdes0 {
834 serdes0_pcie_link: phy@0 {
835 reg = <0>;
836 cdns,num-lanes = <1>;
837 #phy-cells = <0>;
838 cdns,phy-type = <PHY_TYPE_PCIE>;
839 resets = <&serdes_wiz0 1>;
840 };
841};
842
843&serdes1 {
844 serdes1_pcie_link: phy@0 {
845 reg = <0>;
846 cdns,num-lanes = <2>;
847 #phy-cells = <0>;
848 cdns,phy-type = <PHY_TYPE_PCIE>;
849 resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
850 };
851};
852
853&pcie1_rc {
854 status = "okay";
855 pinctrl-names = "default";
856 pinctrl-0 = <&pcie1_rst_pins_default>;
857 phys = <&serdes1_pcie_link>;
858 phy-names = "pcie-phy";
859 num-lanes = <2>;
860 max-link-speed = <3>;
861 reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_HIGH>;
862};
863
864&ufs_wrapper {
865 status = "disabled";
866};
867
868&mailbox0_cluster0 {
869 status = "okay";
870 interrupts = <436>;
871
872 mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
873 ti,mbox-rx = <0 0 0>;
874 ti,mbox-tx = <1 0 0>;
875 };
876
877 mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
878 ti,mbox-rx = <2 0 0>;
879 ti,mbox-tx = <3 0 0>;
880 };
881};
882
883&mailbox0_cluster1 {
884 status = "okay";
885 interrupts = <432>;
886
887 mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
888 ti,mbox-rx = <0 0 0>;
889 ti,mbox-tx = <1 0 0>;
890 };
891
892 mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
893 ti,mbox-rx = <2 0 0>;
894 ti,mbox-tx = <3 0 0>;
895 };
896};
897
898&mailbox0_cluster2 {
899 status = "okay";
900 interrupts = <428>;
901
902 mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
903 ti,mbox-rx = <0 0 0>;
904 ti,mbox-tx = <1 0 0>;
905 };
906
907 mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
908 ti,mbox-rx = <2 0 0>;
909 ti,mbox-tx = <3 0 0>;
910 };
911};
912
913&mailbox0_cluster3 {
914 status = "okay";
915 interrupts = <424>;
916
917 mbox_c66_0: mbox-c66-0 {
918 ti,mbox-rx = <0 0 0>;
919 ti,mbox-tx = <1 0 0>;
920 };
921
922 mbox_c66_1: mbox-c66-1 {
923 ti,mbox-rx = <2 0 0>;
924 ti,mbox-tx = <3 0 0>;
925 };
926};
927
928&mailbox0_cluster4 {
929 status = "okay";
930 interrupts = <420>;
931
932 mbox_c71_0: mbox-c71-0 {
933 ti,mbox-rx = <0 0 0>;
934 ti,mbox-tx = <1 0 0>;
935 };
936};
937
938&mcu_r5fss0_core0 {
939 mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
940 memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
941 <&mcu_r5fss0_core0_memory_region>;
942};
943
944&mcu_r5fss0_core1 {
945 mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
946 memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
947 <&mcu_r5fss0_core1_memory_region>;
948};
949
950&main_r5fss0_core0 {
951 mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
952 memory-region = <&main_r5fss0_core0_dma_memory_region>,
953 <&main_r5fss0_core0_memory_region>;
954};
955
956&main_r5fss0_core1 {
957 mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
958 memory-region = <&main_r5fss0_core1_dma_memory_region>,
959 <&main_r5fss0_core1_memory_region>;
960};
961
962&main_r5fss1_core0 {
963 mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
964 memory-region = <&main_r5fss1_core0_dma_memory_region>,
965 <&main_r5fss1_core0_memory_region>;
966};
967
968&main_r5fss1_core1 {
969 mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
970 memory-region = <&main_r5fss1_core1_dma_memory_region>,
971 <&main_r5fss1_core1_memory_region>;
972};
973
974&c66_0 {
975 status = "okay";
976 mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
977 memory-region = <&c66_0_dma_memory_region>,
978 <&c66_0_memory_region>;
979};
980
981&c66_1 {
982 status = "okay";
983 mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
984 memory-region = <&c66_1_dma_memory_region>,
985 <&c66_1_memory_region>;
986};
987
988&c71_0 {
989 status = "okay";
990 mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
991 memory-region = <&c71_0_dma_memory_region>,
992 <&c71_0_memory_region>;
993};