blob: 91d470f6e5e2f9cfc9d04b11e810360a812f593b [file] [log] [blame]
Parthiban Nallathambid8d33b62019-04-18 00:04:09 +02001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2015-2019 Variscite Ltd.
4 * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
5 */
6
7#include <common.h>
Simon Glass691d7192020-05-10 11:40:02 -06008#include <init.h>
Parthiban Nallathambid8d33b62019-04-18 00:04:09 +02009#include <spl.h>
10#include <asm/arch/clock.h>
11#include <asm/io.h>
12#include <asm/arch/mx6-ddr.h>
13#include <asm/arch/mx6-pins.h>
14#include <asm/arch/crm_regs.h>
Yangbo Lue37ac712019-06-21 11:42:28 +080015#include <fsl_esdhc_imx.h>
Parthiban Nallathambid8d33b62019-04-18 00:04:09 +020016
17#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
18 PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
19 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
20
21static iomux_v3_cfg_t const uart1_pads[] = {
22 MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
23 MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
24};
25
26static void setup_iomux_uart(void)
27{
28 imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
29}
30
31static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
32 .grp_addds = 0x00000030,
33 .grp_ddrmode_ctl = 0x00020000,
34 .grp_b0ds = 0x00000030,
35 .grp_ctlds = 0x00000030,
36 .grp_b1ds = 0x00000030,
37 .grp_ddrpke = 0x00000000,
38 .grp_ddrmode = 0x00020000,
39 .grp_ddr_type = 0x000c0000,
40};
41
42static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
43 .dram_dqm0 = 0x00000030,
44 .dram_dqm1 = 0x00000030,
45 .dram_ras = 0x00000030,
46 .dram_cas = 0x00000030,
47 .dram_odt0 = 0x00000030,
48 .dram_odt1 = 0x00000030,
49 .dram_sdba2 = 0x00000000,
50 .dram_sdclk_0 = 0x00000008,
51 .dram_sdqs0 = 0x00000038,
52 .dram_sdqs1 = 0x00000030,
53 .dram_reset = 0x00000030,
54};
55
56static struct mx6_mmdc_calibration mx6_mmcd_calib = {
57 .p0_mpwldectrl0 = 0x00000000,
58 .p0_mpdgctrl0 = 0x414C0158,
59 .p0_mprddlctl = 0x40403A3A,
60 .p0_mpwrdlctl = 0x40405A56,
61};
62
63struct mx6_ddr_sysinfo ddr_sysinfo = {
64 .dsize = 0,
65 .cs_density = 20,
66 .ncs = 1,
67 .cs1_mirror = 0,
68 .rtt_wr = 2,
69 .rtt_nom = 1, /* RTT_Nom = RZQ/2 */
70 .walat = 1, /* Write additional latency */
71 .ralat = 5, /* Read additional latency */
72 .mif3_mode = 3, /* Command prediction working mode */
73 .bi_on = 1, /* Bank interleaving enabled */
74 .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */
75 .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */
76};
77
78static struct mx6_ddr3_cfg mem_ddr = {
79 .mem_speed = 800,
80 .density = 4,
81 .width = 16,
82 .banks = 8,
83 .rowaddr = 15,
84 .coladdr = 10,
85 .pagesz = 2,
86 .trcd = 1375,
87 .trcmin = 4875,
88 .trasmin = 3500,
89};
90
91static void ccgr_init(void)
92{
93 struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
94
95 writel(0xFFFFFFFF, &ccm->CCGR0);
96 writel(0xFFFFFFFF, &ccm->CCGR1);
97 writel(0xFFFFFFFF, &ccm->CCGR2);
98 writel(0xFFFFFFFF, &ccm->CCGR3);
99 writel(0xFFFFFFFF, &ccm->CCGR4);
100 writel(0xFFFFFFFF, &ccm->CCGR5);
101 writel(0xFFFFFFFF, &ccm->CCGR6);
102 writel(0xFFFFFFFF, &ccm->CCGR7);
103 /* Enable Audio Clock for SOM codec */
104 writel(0x01130100, (long *)CCM_CCOSR);
105}
106
107static void spl_dram_init(void)
108{
109 mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
110 mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
111}
112
113#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
114 PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
115 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
116static iomux_v3_cfg_t const usdhc1_pads[] = {
117 MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
118 MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
119 MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
120 MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
121 MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
122 MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
123};
124
125#ifndef CONFIG_NAND_MXS
126static iomux_v3_cfg_t const usdhc2_pads[] = {
127 MX6_PAD_NAND_RE_B__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
128 MX6_PAD_NAND_WE_B__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
129 MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
130 MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
131 MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
132 MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
133 MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
134 MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
135 MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
136 MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
137};
138#endif
139
140static struct fsl_esdhc_cfg usdhc_cfg[] = {
141 {
142 .esdhc_base = USDHC1_BASE_ADDR,
143 .max_bus_width = 4,
144 },
145#ifndef CONFIG_NAND_MXS
146 {
147 .esdhc_base = USDHC2_BASE_ADDR,
148 .max_bus_width = 8,
149 },
150#endif
151};
152
153int board_mmc_getcd(struct mmc *mmc)
154{
155 return 1;
156}
157
Masahiro Yamadab75d8dc2020-06-26 15:13:33 +0900158int board_mmc_init(struct bd_info *bis)
Parthiban Nallathambid8d33b62019-04-18 00:04:09 +0200159{
160 int i, ret;
161
162 for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
163 switch (i) {
164 case 0:
165 SETUP_IOMUX_PADS(usdhc1_pads);
166 usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
167 break;
168#ifndef CONFIG_NAND_MXS
169 case 1:
170 SETUP_IOMUX_PADS(usdhc2_pads);
171 usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
172 break;
173#endif
174 default:
175 printf("Warning - USDHC%d controller not supporting\n",
176 i + 1);
177 return 0;
178 }
179
180 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
181 if (ret) {
182 printf("Warning: failed to initialize mmc dev %d\n", i);
183 return ret;
184 }
185 }
186
187 return 0;
188}
189
190void board_init_f(ulong dummy)
191{
192 /* setup AIPS and disable watchdog */
193 arch_cpu_init();
194
195 ccgr_init();
196
197 /* setup GP timer */
198 timer_init();
199
200 setup_iomux_uart();
201
Parthiban Nallathambid8d33b62019-04-18 00:04:09 +0200202 /* UART clocks enabled and gd valid - init serial console */
203 preloader_console_init();
204
205 /* DDR initialization */
206 spl_dram_init();
207
208 /* Clear the BSS. */
209 memset(__bss_start, 0, __bss_end - __bss_start);
210
211 /* load/boot image from boot device */
212 board_init_r(NULL, 0);
213}