blob: 50d58217e47d8f0bf8539a9a397debdb7ce3a99f [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Dmitry Lifshitz076446f2014-05-19 12:50:54 +03002/*
3 * Pinmux configuration for Compulab CM-T54 board
4 *
5 * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
6 *
7 * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
Dmitry Lifshitz076446f2014-05-19 12:50:54 +03008 */
9
10#ifndef _CM_T54_MUX_DATA_H
11#define _CM_T54_MUX_DATA_H
12
13#include <asm/arch/mux_omap5.h>
14#include <asm/arch/sys_proto.h>
15
16const struct pad_conf_entry core_padconf_array_essential[] = {
17 /* MMC1 - SD CARD */
18 {SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */
19 {SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */
20 {SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0 */
21 {SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1 */
22 {SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2 */
23 {SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3 */
24
25 /* SD CARD CD and WP GPIOs*/
26 {TIMER5_PWM_EVT, (PTU | IEN | M6)}, /* GPIO8_228 */
27 {TIMER6_PWM_EVT, (PTU | IEN | M6)}, /* GPIO8_229 */
28
29 /* MMC2 - eMMC */
30 {EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */
31 {EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */
32 {EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */
33 {EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */
34 {EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */
35 {EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */
36 {EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */
37 {EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */
38 {EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */
39 {EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */
40
41 /* UART4 */
42 {I2C5_SCL, (PTU | IEN | M2)}, /* UART4_RX */
43 {I2C5_SDA, (M2)}, /* UART4_TX */
44
45 /* Led */
46 {HSI2_CAFLAG, (PTU | M6)}, /* GPIO3_80 */
47
48 /* I2C1 */
49 {I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */
50 {I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */
51
52 /* USBB2, USBB3 */
53 {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */
54 {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */
55 {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE */
56 {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */
57
58 /* USB Hub and USB Eth reset GPIOs */
59 {HSI2_CAREADY, (PTD | M6)}, /* GPIO3_76 */
60 {HSI2_ACDATA, (PTD | M6)}, /* GPIO3_83 */
61
62 /* I2C4 */
63 {I2C4_SCL, (PTU | IEN | M0)}, /* I2C4_SCL */
64 {I2C4_SDA, (PTU | IEN | M0)}, /* I2C4_SDA */
65};
66
67const struct pad_conf_entry wkup_padconf_array_essential[] = {
68 {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */
69 {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */
70 {SYS_32K, (IEN | M0)}, /* SYS_32K */
71
72 /* USB Hub clock */
73 {FREF_CLK1_OUT, (PTD | IEN | M0)}, /* FREF_CLK1_OUT */
74};
75
76/*
Paul Kocialkowski3ef56e62016-02-27 19:18:56 +010077 * Routine: set_muxconf_regs
Dmitry Lifshitz076446f2014-05-19 12:50:54 +030078 * Description: setup board pinmux configuration.
79 */
Paul Kocialkowski3ef56e62016-02-27 19:18:56 +010080void set_muxconf_regs(void)
Dmitry Lifshitz076446f2014-05-19 12:50:54 +030081{
82 do_set_mux((*ctrl)->control_padconf_core_base,
83 core_padconf_array_essential,
84 sizeof(core_padconf_array_essential) /
85 sizeof(struct pad_conf_entry));
86
87 do_set_mux((*ctrl)->control_padconf_wkup_base,
88 wkup_padconf_array_essential,
89 sizeof(wkup_padconf_array_essential) /
90 sizeof(struct pad_conf_entry));
91}
92
93#endif /* _CM_T54_MUX_DATA_H */