Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 65cc7dcd77aef48ed20d73d17367e32f5cc4e8dd / . / arch / arm / dts / logicpd-torpedo-baseboard.dtsi
blob: 86c5644f558cb248f8083103305c9c71308ed334 [file] [log] [blame]
Adam Forde6ea2392018-07-09 20:18:14 -0500[diff] [blame]1/*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License version 2 as
4 * published by the Free Software Foundation.
5 */
6
7/ {
8 gpio_keys {
9 compatible = "gpio-keys";
10 pinctrl-names = "default";
11 pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
12
13 sysboot2 {
14 label = "sysboot2";
15 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
16 linux,code = <BTN_0>;
17 wakeup-source;
18 };
19
20 sysboot5 {
21 label = "sysboot5";
22 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
23 linux,code = <BTN_1>;
24 wakeup-source;
25 };
26
27 gpio1 {
28 label = "gpio1";
29 gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
30 linux,code = <BTN_2>;
31 wakeup-source;
32 };
33
34 gpio2 {
35 label = "gpio2";
36 gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
37 linux,code = <BTN_3>;
38 wakeup-source;
39 };
40 };
41
42 sound {
43 compatible = "ti,omap-twl4030";
44 ti,model = "omap3logic";
45 ti,mcbsp = <&mcbsp2>;
46 };
47
48 leds {
49 compatible = "gpio-leds";
50 pinctrl-names = "default";
51 pinctrl-0 = <&led_pins>;
52
53 led1 {
54 label = "led1";
55 gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
56 linux,default-trigger = "cpu0";
57 };
58
59 led2 {
60 label = "led2";
61 gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
62 linux,default-trigger = "none";
63 };
64 };
65
66 pwm10: dmtimer-pwm {
67 compatible = "ti,omap-dmtimer-pwm";
68 pinctrl-names = "default";
69 pinctrl-0 = <&pwm_pins>;
70 ti,timers = <&timer10>;
71 #pwm-cells = <3>;
72 };
73
74};
75
76&vaux1 {
77 regulator-min-microvolt = <3000000>;
78 regulator-max-microvolt = <3000000>;
79};
80
81&vaux4 {
82 regulator-min-microvolt = <1800000>;
83 regulator-max-microvolt = <1800000>;
84};
85
86&mcbsp2 {
87 status = "okay";
88};
89
90&charger {
91 ti,bb-uvolt = <3200000>;
92 ti,bb-uamp = <150>;
93};
94
95&gpmc {
96 ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
97 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
98
99 ethernet@gpmc {
100 pinctrl-names = "default";
101 pinctrl-0 = <&lan9221_pins>;
102 interrupt-parent = <&gpio5>;
103 interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
104 reg = <1 0 0xff>;
105 };
106};
107
108&vpll2 {
109 regulator-always-on;
110};
111
112&dss {
113 status = "ok";
114 vdds_dsi-supply = <&vpll2>;
115 vdda_video-supply = <&video_reg>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&dss_dpi_pins1>;
118 port {
119 dpi_out: endpoint {
120 remote-endpoint = <&lcd_in>;
121 data-lines = <16>;
122 };
123 };
124};
125
126/ {
127 aliases {
128 display0 = &lcd0;
129 };
130
131 video_reg: video_reg {
132 pinctrl-names = "default";
133 pinctrl-0 = <&panel_pwr_pins>;
134 compatible = "regulator-fixed";
135 regulator-name = "fixed-supply";
136 regulator-min-microvolt = <3300000>;
137 regulator-max-microvolt = <3300000>;
138 gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
139 };
140
141 lcd0: display {
142 compatible = "panel-dpi";
143 label = "15";
144 status = "okay";
145 /* default-on; */
146 pinctrl-names = "default";
147
148 port {
149 lcd_in: endpoint {
150 remote-endpoint = <&dpi_out>;
151 };
152 };
153
154 panel-timing {
155 clock-frequency = <9000000>;
156 hactive = <480>;
157 vactive = <272>;
158 hfront-porch = <3>;
159 hback-porch = <2>;
160 hsync-len = <42>;
161 vback-porch = <3>;
162 vfront-porch = <4>;
163 vsync-len = <11>;
164 hsync-active = <0>;
165 vsync-active = <0>;
166 de-active = <1>;
167 pixelclk-active = <1>;
168 };
169 };
170
171 bl: backlight {
172 compatible = "pwm-backlight";
173 pinctrl-names = "default";
174 pinctrl-0 = <&backlight_pins>;
175 pwms = <&pwm10 0 5000000 0>;
176 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
177 default-brightness-level = <7>;
178 enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
179 };
180};
181
182&mmc1 {
183 interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
184 pinctrl-names = "default";
185 pinctrl-0 = <&mmc1_pins &mmc1_cd>;
186 cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */
187 vmmc-supply = <&vmmc1>;
188 bus-width = <4>;
189 cap-power-off-card;
190};
191
192&omap3_pmx_core {
193 gpio_key_pins: pinmux_gpio_key_pins {
194 pinctrl-single,pins = <
195 OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
196 OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
197 >;
198 };
199
200 pwm_pins: pinmux_pwm_pins {
201 pinctrl-single,pins = <
202 OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */
203 >;
204 };
205
206 led_pins: pinmux_led_pins {
207 pinctrl-single,pins = <
208 OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
209 OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
210 >;
211 };
212
213 mmc1_pins: pinmux_mmc1_pins {
214 pinctrl-single,pins = <
215 OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
216 OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
217 OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
218 OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
219 OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
220 OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
221 >;
222 };
223
224 tsc2004_pins: pinmux_tsc2004_pins {
225 pinctrl-single,pins = <
226 OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
227 >;
228 };
229
230 backlight_pins: pinmux_backlight_pins {
231 pinctrl-single,pins = <
232 OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
233 >;
234 };
235
236 isp_pins: pinmux_isp_pins {
237 pinctrl-single,pins = <
238 OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */
239 OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */
240 OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
241 OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
242
243 OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
244 OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
245 OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
246 OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
247 OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
248 OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */
249 OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */
250 OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */
251 >;
252 };
253
254 panel_pwr_pins: pinmux_panel_pwr_pins {
255 pinctrl-single,pins = <
256 OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */
257 >;
258 };
259
260 dss_dpi_pins1: pinmux_dss_dpi_pins1 {
261 pinctrl-single,pins = <
262 OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */
263 OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */
264 OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */
265 OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */
266
267 OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */
268 OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */
269 OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */
270 OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */
271 OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */
272 OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */
273 OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */
274 OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */
275 OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */
276 OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */
277 OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */
278 OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */
279
280 OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */
281 OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */
282 OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */
283 OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */
284 OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */
285 OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */
286 >;
287 };
288};
289
290&omap3_pmx_wkup {
291 gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
292 pinctrl-single,pins = <
293 OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
294 OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
295 >;
296 };
297
298 lan9221_pins: pinmux_lan9221_pins {
299 pinctrl-single,pins = <
300 OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
301 >;
302 };
303
304 mmc1_cd: pinmux_mmc1_cd {
305 pinctrl-single,pins = <
306 OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
307 >;
308 };
309};
310
311&i2c2 {
312 mt9p031@48 {
313 compatible = "aptina,mt9p031";
314 reg = <0x48>;
315 clocks = <&isp 0>;
316 vaa-supply = <&vaux4>;
317 vdd-supply = <&vaux4>;
318 vdd_io-supply = <&vaux4>;
319 port {
320 mt9p031_out: endpoint {
321 input-clock-frequency = <24000000>;
322 pixel-clock-frequency = <72000000>;
323 remote-endpoint = <&ccdc_ep>;
324 };
325 };
326 };
327};
328
329&i2c3 {
330 touchscreen: tsc2004@48 {
331 compatible = "ti,tsc2004";
332 reg = <0x48>;
333 vio-supply = <&vaux1>;
334 pinctrl-names = "default";
335 pinctrl-0 = <&tsc2004_pins>;
336 interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
337
338 touchscreen-fuzz-x = <4>;
339 touchscreen-fuzz-y = <7>;
340 touchscreen-fuzz-pressure = <2>;
341 touchscreen-size-x = <4096>;
342 touchscreen-size-y = <4096>;
343 touchscreen-max-pressure = <2048>;
344
345 ti,x-plate-ohms = <280>;
346 ti,esd-recovery-timeout-ms = <8000>;
347 };
348};
349
350&mcspi1 {
351 at25@0 {
352 compatible = "atmel,at25";
353 reg = <0>;
354 spi-max-frequency = <5000000>;
355 spi-cpha;
356 spi-cpol;
357
358 pagesize = <64>;
359 size = <32768>;
360 address-width = <16>;
361 };
362};
363
364&isp {
365 pinctrl-names = "default";
366 pinctrl-0 = <&isp_pins>;
367 ports {
368 port@0 {
369 reg = <0>;
370 ccdc_ep: endpoint {
371 remote-endpoint = <&mt9p031_out>;
372 bus-width = <8>;
373 hsync-active = <1>;
374 vsync-active = <1>;
375 pclk-sample = <0>;
376 };
377 };
378 };
379};
380
381&uart1 {
382 interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
383};
384
385/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
386&usb_otg_hs {
387 pinctrl-names = "default";
388 pinctrl-0 = <&hsusb_otg_pins>;
389 interface-type = <0>;
390 usb-phy = <&usb2_phy>;
391 phys = <&usb2_phy>;
392 phy-names = "usb2-phy";
393 mode = <3>;
394 power = <50>;
395};