blob: 623cb6636b365e3c4a770b9f5fcfbee52fc0d62f [file] [log] [blame]
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +01001/*
2 * (C) Copyright 2000-2005
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * (C) Copyright 2006
6 * Martin Krause, TQ-Systems GmBH, martin.krause@tqs.de
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27/*
28 * board/config.h - configuration options, board specific
29 */
30
31#ifndef __CONFIG_H
32#define __CONFIG_H
33
34/*
35 * High Level Configuration Options
36 * (easy to change)
37 */
38
39#define CONFIG_MPC885 1 /* This is a MPC885 CPU */
40#define CONFIG_TQM885D 1 /* ...on a TQM88D module */
41#define CONFIG_TK885D 1 /* ...in a TK885D base board */
42
Wolfgang Denk2ae18242010-10-06 09:05:45 +020043#define CONFIG_SYS_TEXT_BASE 0x40000000
44
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010045#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz - PLL input clock */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020046#define CONFIG_SYS_8xx_CPUCLK_MIN 15000000 /* 15 MHz - CPU minimum clock */
47#define CONFIG_SYS_8xx_CPUCLK_MAX 133000000 /* 133 MHz - CPU maximum clock */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010048#define CONFIG_8xx_CPUCLK_DEFAULT 66000000 /* 66 MHz - CPU default clock */
49 /* (it will be used if there is no */
50 /* 'cpuclk' variable with valid value) */
51
52#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
Wolfgang Denk3cb7a482009-07-28 22:13:52 +020053#define CONFIG_SYS_SMC_RXBUFLEN 128
54#define CONFIG_SYS_MAXIDLE 10
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010055#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
56
57#define CONFIG_BOOTCOUNT_LIMIT
58
59#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
60
61#define CONFIG_BOARD_TYPES 1 /* support board types */
62
63#define CONFIG_PREBOOT "echo;" \
Wolfgang Denk32bf3d12008-03-03 12:16:44 +010064 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010065 "echo"
66
67#undef CONFIG_BOOTARGS
68
69#define CONFIG_EXTRA_ENV_SETTINGS \
Heiko Schocher48690d82010-07-20 17:45:02 +020070 "ethprime=FEC\0" \
71 "ethact=FEC\0" \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010072 "netdev=eth0\0" \
73 "nfsargs=setenv bootargs root=/dev/nfs rw " \
74 "nfsroot=${serverip}:${rootpath}\0" \
75 "ramargs=setenv bootargs root=/dev/ram rw\0" \
76 "addip=setenv bootargs ${bootargs} " \
77 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
78 ":${hostname}:${netdev}:off panic=1\0" \
79 "flash_nfs=run nfsargs addip;" \
80 "bootm ${kernel_addr}\0" \
81 "flash_self=run ramargs addip;" \
82 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
83 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
84 "rootpath=/opt/eldk/ppc_8xx\0" \
Wolfgang Denk2b4f7782008-01-15 17:21:28 +010085 "bootfile=/tftpboot/tk885d/uImage\0" \
86 "u-boot=/tftpboot/tk885d/u-boot.bin\0" \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010087 "kernel_addr=40080000\0" \
88 "ramdisk_addr=40180000\0" \
89 "load=tftp 200000 ${u-boot}\0" \
90 "update=protect off 40000000 +${filesize};" \
91 "erase 40000000 +${filesize};" \
92 "cp.b 200000 40000000 ${filesize};" \
93 "protect on 40000000 +${filesize}\0" \
94 ""
95#define CONFIG_BOOTCOMMAND "run flash_self"
96
97#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020098#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +010099
100#undef CONFIG_WATCHDOG /* watchdog disabled */
101
102#define CONFIG_STATUS_LED 1 /* Status LED enabled */
103
104#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
105
106/* enable I2C and select the hardware/software driver */
107#undef CONFIG_HARD_I2C /* I2C with hardware support */
108#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
109
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200110#define CONFIG_SYS_I2C_SPEED 93000 /* 93 kHz is supposed to work */
111#define CONFIG_SYS_I2C_SLAVE 0xFE
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100112
113#ifdef CONFIG_SOFT_I2C
114/*
115 * Software (bit-bang) I2C driver configuration
116 */
117#define PB_SCL 0x00000020 /* PB 26 */
118#define PB_SDA 0x00000010 /* PB 27 */
119
120#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
121#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
122#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
123#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
124#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
125 else immr->im_cpm.cp_pbdat &= ~PB_SDA
126#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
127 else immr->im_cpm.cp_pbdat &= ~PB_SCL
128#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
129#endif /* CONFIG_SOFT_I2C */
130
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200131#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C?? */
132#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
133#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
134#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100135
136# define CONFIG_RTC_DS1337 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200137# define CONFIG_SYS_I2C_RTC_ADDR 0x68
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100138
139/*
140 * BOOTP options
141 */
142#define CONFIG_BOOTP_SUBNETMASK
143#define CONFIG_BOOTP_GATEWAY
144#define CONFIG_BOOTP_HOSTNAME
145#define CONFIG_BOOTP_BOOTPATH
146#define CONFIG_BOOTP_BOOTFILESIZE
147
148
149#define CONFIG_MAC_PARTITION
150#define CONFIG_DOS_PARTITION
151
152#undef CONFIG_RTC_MPC8xx /* MPC885 does not support RTC */
153
154#define CONFIG_TIMESTAMP /* but print image timestmps */
155
156
157/*
158 * Command line configuration.
159 */
160#include <config_cmd_default.h>
161
162#define CONFIG_CMD_ASKENV
163#define CONFIG_CMD_DATE
164#define CONFIG_CMD_DHCP
165#define CONFIG_CMD_EEPROM
166#define CONFIG_CMD_I2C
167#define CONFIG_CMD_IDE
168#define CONFIG_CMD_MII
169#define CONFIG_CMD_NFS
170#define CONFIG_CMD_PING
171
172
173/*
174 * Miscellaneous configurable options
175 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200176#define CONFIG_SYS_LONGHELP /* undef to save memory */
177#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100178
179#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200180#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100181
182#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200183#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100184#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200185#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100186#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200187#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
188#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
189#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100190
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200191#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
192#define CONFIG_SYS_MEMTEST_END 0x0300000 /* 1 ... 3 MB in DRAM */
193#define CONFIG_SYS_ALT_MEMTEST /* alternate, more extensive
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100194 memory test.*/
195
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200196#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100197
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200198#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100199
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100200/*
201 * Enable loopw command.
202 */
203#define CONFIG_LOOPW
204
205/*
206 * Low Level Configuration Settings
207 * (address mappings, register initial values, etc.)
208 * You should know what you are doing if you make changes here.
209 */
210/*-----------------------------------------------------------------------
211 * Internal Memory Mapped Register
212 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200213#define CONFIG_SYS_IMMR 0xFFF00000
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100214
215/*-----------------------------------------------------------------------
216 * Definitions for initial stack pointer and data area (in DPRAM)
217 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200218#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
Wolfgang Denk553f0982010-10-26 13:32:32 +0200219#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200220#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200221#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100222
223/*-----------------------------------------------------------------------
224 * Start addresses for the final memory configuration
225 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200226 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100227 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200228#define CONFIG_SYS_SDRAM_BASE 0x00000000
229#define CONFIG_SYS_FLASH_BASE 0x40000000
230#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
231#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
232#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 128 kB for malloc() */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100233
234/*
235 * For booting Linux, the board info and command line data
236 * have to be in the first 8 MB of memory, since this is
237 * the maximum mapped by the Linux kernel during initialization.
238 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200239#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100240
241/*-----------------------------------------------------------------------
242 * FLASH organization
243 */
244
245/* use CFI flash driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200246#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200247#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200248#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
249#define CONFIG_SYS_FLASH_EMPTY_INFO
250#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
251#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
252#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100253
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200254#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200255#define CONFIG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
256#define CONFIG_ENV_SIZE 0x08000 /* Total Size of Environment */
257#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100258
259/* Address and size of Redundant Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200260#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
261#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100262
263/*-----------------------------------------------------------------------
264 * Hardware Information Block
265 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200266#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
267#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */
268#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100269
270/*-----------------------------------------------------------------------
271 * Cache Configuration
272 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100274#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200275#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100276#endif
277
278/*-----------------------------------------------------------------------
279 * SYPCR - System Protection Control 11-9
280 * SYPCR can only be written once after reset!
281 *-----------------------------------------------------------------------
282 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
283 */
284#if defined(CONFIG_WATCHDOG)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200285#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100286 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
287#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200288#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100289#endif
290
291/*-----------------------------------------------------------------------
292 * SIUMCR - SIU Module Configuration 11-6
293 *-----------------------------------------------------------------------
294 * PCMCIA config., multi-function pin tri-state
295 */
296#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200297#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100298#else /* we must activate GPL5 in the SIUMCR for CAN */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200299#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100300#endif /* CONFIG_CAN_DRIVER */
301
302/*-----------------------------------------------------------------------
303 * TBSCR - Time Base Status and Control 11-26
304 *-----------------------------------------------------------------------
305 * Clear Reference Interrupt Status, Timebase freezing enabled
306 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200307#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100308
309/*-----------------------------------------------------------------------
310 * PISCR - Periodic Interrupt Status and Control 11-31
311 *-----------------------------------------------------------------------
312 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
313 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200314#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100315
316/*-----------------------------------------------------------------------
317 * SCCR - System Clock and reset Control Register 15-27
318 *-----------------------------------------------------------------------
319 * Set clock output, timebase and RTC source and divider,
320 * power management and some other internal clocks
321 */
322#define SCCR_MASK SCCR_EBDF11
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200323#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100324 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
325 SCCR_DFALCD00)
326
327/*-----------------------------------------------------------------------
328 * PCMCIA stuff
329 *-----------------------------------------------------------------------
330 *
331 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200332#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
333#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
334#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
335#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
336#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
337#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
338#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
339#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100340
341/*-----------------------------------------------------------------------
342 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
343 *-----------------------------------------------------------------------
344 */
345
Pavel Herrmann8d1165e11a2012-10-09 07:01:56 +0000346#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100347#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
348
349#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
350#undef CONFIG_IDE_LED /* LED for ide not supported */
351#undef CONFIG_IDE_RESET /* reset for ide not supported */
352
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200353#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
354#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100355
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200356#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100357
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200358#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100359
360/* Offset for data I/O */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200361#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100362
363/* Offset for normal register accesses */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200364#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100365
366/* Offset for alternate registers */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200367#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100368
369/*-----------------------------------------------------------------------
370 *
371 *-----------------------------------------------------------------------
372 *
373 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200374#define CONFIG_SYS_DER 0
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100375
376/*
377 * Init Memory Controller:
378 *
379 * BR0/1 and OR0/1 (FLASH)
380 */
381
382#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
383#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
384
385/* used to re-map FLASH both when starting from SRAM or FLASH:
386 * restrict access enough to keep SRAM working (if any)
387 * but not too much to meddle with FLASH accesses
388 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200389#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */
390#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100391
392/*
393 * FLASH timing: Default value of OR0 after reset
394 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200395#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100396 OR_SCY_6_CLK | OR_TRLX)
397
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200398#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
399#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
400#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100401
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200402#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP
403#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM
404#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100405
406/*
407 * BR2/3 and OR2/3 (SDRAM)
408 *
409 */
410#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
411#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
412#define SDRAM_MAX_SIZE (256 << 20) /* max 256 MB per bank */
413
414/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200415#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100416
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200417#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
418#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100419
420#ifndef CONFIG_CAN_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200421#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM
422#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100423#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200424#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
425#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
426#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
427#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100428 BR_PS_8 | BR_MS_UPMB | BR_V )
429#endif /* CONFIG_CAN_DRIVER */
430
431/*
432 * 4096 Rows from SDRAM example configuration
433 * 1000 factor s -> ms
434 * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration
435 * 4 Number of refresh cycles per period
436 * 64 Refresh cycle in ms per number of rows
437 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200438#define CONFIG_SYS_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64))
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100439
440/*
441 * Periodic timer (MAMR[PTx]) for 4 * 7.8 us refresh (= 31.2 us per quad)
442 *
443 * CPUclock(MHz) * 31.2
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200444 * CONFIG_SYS_MAMR_PTA = ----------------------------------- with DFBRG = 0
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100445 * 2^(2*SCCR[DFBRG]) * MPTPR_PTP_DIV16
446 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200447 * CPU clock = 15 MHz: CONFIG_SYS_MAMR_PTA = 29 -> 4 * 7.73 us
448 * CPU clock = 50 MHz: CONFIG_SYS_MAMR_PTA = 97 -> 4 * 7.76 us
449 * CPU clock = 66 MHz: CONFIG_SYS_MAMR_PTA = 128 -> 4 * 7.75 us
450 * CPU clock = 133 MHz: CONFIG_SYS_MAMR_PTA = 255 -> 4 * 7.67 us
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100451 *
452 * Value 97 is for 4 * 7.8 us at 50 MHz. So the refresh cycle requirement will
453 * be met also in the default configuration, i.e. if environment variable
454 * 'cpuclk' is not set.
455 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200456#define CONFIG_SYS_MAMR_PTA 128
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100457
458/*
459 * Memory Periodic Timer Prescaler Register (MPTPR) values.
460 */
461/* 4 * 7.8 us refresh (= 31.2 us per quad) at 50 MHz and PTA = 97 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200462#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100463/* 4 * 3.9 us refresh (= 15.6 us per quad) at 50 MHz and PTA = 97 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200464#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100465
466/*
467 * MAMR settings for SDRAM
468 */
469
470/* 8 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200471#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100472 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
473 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
474/* 9 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200475#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100476 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
477 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
478/* 10 column SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200479#define CONFIG_SYS_MAMR_10COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100480 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9 | \
481 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
482
483/*
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100484 * Network configuration
485 */
486#define CONFIG_FEC_ENET /* enable ethernet on FEC */
487#define CONFIG_ETHER_ON_FEC1 /* ... for FEC1 */
488#define CONFIG_ETHER_ON_FEC2 /* ... for FEC2 */
489
490#define CONFIG_LAST_STAGE_INIT 1 /* Have to configure PHYs for Linux */
491
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200492/* CONFIG_SYS_DISCOVER_PHY only works with FEC if only one interface is enabled */
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100493#if (!defined(CONFIG_ETHER_ON_FEC1) || !defined(CONFIG_ETHER_ON_FEC2))
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200494#define CONFIG_SYS_DISCOVER_PHY
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100495#endif
496
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200497#ifndef CONFIG_SYS_DISCOVER_PHY
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100498/* PHY addresses - hard wired in hardware */
499#define CONFIG_FEC1_PHY 1
500#define CONFIG_FEC2_PHY 2
501#endif
502
TsiChung Liew0f3ba7e2008-03-30 01:22:13 -0500503#define CONFIG_MII_INIT 1
504
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100505#define CONFIG_NET_RETRY_COUNT 3
Heiko Schocher48690d82010-07-20 17:45:02 +0200506#define CONFIG_ETHPRIME "FEC"
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100507
Heiko Schocher7026ead2010-02-09 15:50:27 +0100508/* pass open firmware flat tree */
509#define CONFIG_OF_LIBFDT 1
510#define CONFIG_OF_BOARD_SETUP 1
511#define CONFIG_HWCONFIG 1
512
Guennadi Liakhovetskiefc6f442008-01-10 17:59:07 +0100513#endif /* __CONFIG_H */