blob: d3b8379186390058a2a60caddb49ed4d9afda08b [file] [log] [blame]
Heiko Schocher4e43b2e2010-07-07 12:26:34 +02001/*
2 * Copyright (C) Freescale Semiconductor, Inc. 2006.
3 *
4 * (C) Copyright 2010
5 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25/*
26 * ve8313 board configuration file
27 */
28
29#ifndef __CONFIG_H
30#define __CONFIG_H
31
32/*
33 * High Level Configuration Options
34 */
35#define CONFIG_E300 1
36#define CONFIG_MPC83xx 1
37#define CONFIG_MPC831x 1
38#define CONFIG_MPC8313 1
39#define CONFIG_VE8313 1
40
Wolfgang Denk2ae18242010-10-06 09:05:45 +020041#ifndef CONFIG_SYS_TEXT_BASE
42#define CONFIG_SYS_TEXT_BASE 0xfe000000
43#endif
44
Heiko Schocher4e43b2e2010-07-07 12:26:34 +020045#define CONFIG_PCI 1
Kumar Galaa2243b82010-08-19 01:48:14 -050046#define CONFIG_FSL_ELBC 1
Heiko Schocher4e43b2e2010-07-07 12:26:34 +020047
48#define CONFIG_BOARD_EARLY_INIT_F 1
49
50/*
51 * On-board devices
52 *
53 */
54#define CONFIG_83XX_CLKIN 32000000 /* in Hz */
55
56#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
57
58#define CONFIG_SYS_IMMR 0xE0000000
59
60#define CONFIG_SYS_MEMTEST_START 0x00001000
61#define CONFIG_SYS_MEMTEST_END 0x07000000
62
63#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth */
64#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count */
65
66/*
67 * Device configurations
68 */
69
70/*
71 * DDR Setup
72 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -050073#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/
Heiko Schocher4e43b2e2010-07-07 12:26:34 +020074#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
75#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
76
77/*
78 * Manually set up DDR parameters, as this board does not
79 * have the SPD connected to I2C.
80 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -050081#define CONFIG_SYS_DDR_SIZE 128 /* MB */
Joe Hershberger2e651b22011-10-11 23:57:31 -050082#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +020083 | CSCONFIG_AP \
Joe Hershberger2fef4022011-10-11 23:57:29 -050084 | CSCONFIG_ODT_RD_NEVER \
85 | CSCONFIG_ODT_WR_ALL \
Joe Hershbergerbe29fa72011-10-11 23:57:26 -050086 | CSCONFIG_ROW_BIT_13 \
87 | CSCONFIG_COL_BIT_10)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +020088 /* 0x80840102 */
89
90#define CONFIG_SYS_DDR_TIMING_3 0x00000000
Joe Hershbergerbe29fa72011-10-11 23:57:26 -050091#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \
92 | (0 << TIMING_CFG0_WRT_SHIFT) \
93 | (3 << TIMING_CFG0_RRT_SHIFT) \
94 | (2 << TIMING_CFG0_WWT_SHIFT) \
95 | (7 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
96 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
97 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
98 | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
Heiko Schocher4e43b2e2010-07-07 12:26:34 +020099 /* 0x0e720802 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500100#define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \
101 | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \
102 | (2 << TIMING_CFG1_ACTTORW_SHIFT) \
103 | (5 << TIMING_CFG1_CASLAT_SHIFT) \
104 | (6 << TIMING_CFG1_REFREC_SHIFT) \
105 | (2 << TIMING_CFG1_WRREC_SHIFT) \
106 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
107 | (2 << TIMING_CFG1_WRTORD_SHIFT))
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200108 /* 0x26256222 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500109#define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \
110 | (5 << TIMING_CFG2_CPO_SHIFT) \
111 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
112 | (1 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
113 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
114 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
115 | (7 << TIMING_CFG2_FOUR_ACT_SHIFT))
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200116 /* 0x029028c7 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500117#define CONFIG_SYS_DDR_INTERVAL ((0x320 << SDRAM_INTERVAL_REFINT_SHIFT) \
118 | (0x2000 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200119 /* 0x03202000 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500120#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200121 | SDRAM_CFG_SDRAM_TYPE_DDR2 \
Joe Hershberger2fef4022011-10-11 23:57:29 -0500122 | SDRAM_CFG_DBW_32)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200123 /* 0x43080000 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500124#define CONFIG_SYS_SDRAM_CFG2 0x00401000
125#define CONFIG_SYS_DDR_MODE ((0x4440 << SDRAM_MODE_ESD_SHIFT) \
126 | (0x0232 << SDRAM_MODE_SD_SHIFT))
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200127 /* 0x44400232 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500128#define CONFIG_SYS_DDR_MODE_2 0x8000C000
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200129
130#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
131 /*0x02000000*/
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500132#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200133 | DDRCDR_PZ_NOMZ \
134 | DDRCDR_NZ_NOMZ \
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500135 | DDRCDR_M_ODR)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200136 /* 0x73000002 */
137
138/*
139 * FLASH on the Local Bus
140 */
141#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
142#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
143#define CONFIG_SYS_FLASH_BASE 0xFE000000
144#define CONFIG_SYS_FLASH_SIZE 32 /* size in MB */
145#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */
146#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */
147
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500148#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \
Joe Hershberger7d6a0982011-10-11 23:57:30 -0500149 | BR_PS_16 /* 16 bit */ \
150 | BR_MS_GPCM /* MSEL = GPCM */ \
151 | BR_V) /* valid */
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200152#define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500153 | OR_GPCM_CSNT \
154 | OR_GPCM_ACS_DIV4 \
155 | OR_GPCM_SCY_5 \
Joe Hershberger7d6a0982011-10-11 23:57:30 -0500156 | OR_GPCM_TRLX_SET \
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500157 | OR_GPCM_EAD)
158 /* 0xfe000c55 */
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200159
160#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
Joe Hershberger7d6a0982011-10-11 23:57:30 -0500161#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200162
163#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
164#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per dev */
165
166#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
167#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
168
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200169#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200170
171#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
172#define CONFIG_SYS_RAMBOOT
173#endif
174
175#define CONFIG_SYS_INIT_RAM_LOCK 1
176#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500177#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200178
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500179#define CONFIG_SYS_GBL_DATA_OFFSET \
180 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200181#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
182
183/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
184#define CONFIG_SYS_MONITOR_LEN (384 * 1024)
185#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
186
187/*
188 * Local Bus LCRR and LBCR regs
189 */
190#define CONFIG_SYS_LCRR_EADC LCRR_EADC_3
191#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
192
193#define CONFIG_SYS_LBC_LBCR 0x00040000
194
195#define CONFIG_SYS_LBC_MRTPR 0x20000000
196
197/*
198 * NAND settings
199 */
200#define CONFIG_SYS_NAND_BASE 0x61000000
201#define CONFIG_SYS_MAX_NAND_DEVICE 1
202#define CONFIG_MTD_NAND_VERIFY_WRITE
203#define CONFIG_CMD_NAND 1
204#define CONFIG_NAND_FSL_ELBC 1
205#define CONFIG_SYS_NAND_BLOCK_SIZE 16384
206
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500207#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \
208 | BR_PS_8 \
209 | BR_DECC_CHK_GEN \
210 | BR_MS_FCM \
211 | BR_V) /* valid */
212 /* 0x61000c21 */
Joe Hershberger7d6a0982011-10-11 23:57:30 -0500213#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500214 | OR_FCM_BCTLD \
215 | OR_FCM_CHT \
216 | OR_FCM_SCY_2 \
217 | OR_FCM_RST \
218 | OR_FCM_TRLX)
219 /* 0xffff90ac */
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200220
221#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
222#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
223#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
224#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
225
226#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
Joe Hershberger7d6a0982011-10-11 23:57:30 -0500227#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200228
229#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
230#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
231
232/* CS2 NvRAM */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500233#define CONFIG_SYS_BR2_PRELIM (0x60000000 \
234 | BR_PS_8 \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200235 | BR_V)
236 /* 0x60000801 */
Joe Hershberger7d6a0982011-10-11 23:57:30 -0500237#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500238 | OR_GPCM_CSNT \
239 | OR_GPCM_XACS \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200240 | OR_GPCM_SCY_3 \
Joe Hershberger7d6a0982011-10-11 23:57:30 -0500241 | OR_GPCM_TRLX_SET \
242 | OR_GPCM_EHTR_SET \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200243 | OR_GPCM_EAD)
244 /* 0xfffe0937 */
245/* local bus read write buffer mapping SRAM@0x64000000 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500246#define CONFIG_SYS_BR3_PRELIM (0x62000000 \
247 | BR_PS_16 \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200248 | BR_V)
249 /* 0x62001001 */
250
Joe Hershberger7d6a0982011-10-11 23:57:30 -0500251#define CONFIG_SYS_OR3_PRELIM (OR_AM_32MB \
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500252 | OR_GPCM_CSNT \
253 | OR_GPCM_XACS \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200254 | OR_GPCM_SCY_15 \
Joe Hershberger7d6a0982011-10-11 23:57:30 -0500255 | OR_GPCM_TRLX_SET \
256 | OR_GPCM_EHTR_SET \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200257 | OR_GPCM_EAD)
258 /* 0xfe0009f7 */
259
260/* pass open firmware flat tree */
261#define CONFIG_OF_LIBFDT 1
262#define CONFIG_OF_BOARD_SETUP 1
263#define CONFIG_OF_STDOUT_VIA_ALIAS 1
264
265/*
266 * Serial Port
267 */
268#define CONFIG_CONS_INDEX 1
269#define CONFIG_SYS_NS16550
270#define CONFIG_SYS_NS16550_SERIAL
271#define CONFIG_SYS_NS16550_REG_SIZE 1
272#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
273
274#define CONFIG_SYS_BAUDRATE_TABLE \
275 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
276
277#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
278#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
279
280/* Use the HUSH parser */
281#define CONFIG_SYS_HUSH_PARSER
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200282
283#if defined(CONFIG_PCI)
284/*
285 * General PCI
286 * Addresses are mapped 1-1.
287 */
288#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
289#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
290#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
291#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
292#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
293#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500294#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
295#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
296#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200297
298#define CONFIG_PCI_PNP /* do pci plug-and-play */
299#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
300#endif
301
302/*
303 * TSEC
304 */
305#define CONFIG_TSEC_ENET /* TSEC ethernet support */
306
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200307
308#define CONFIG_TSEC1
309#ifdef CONFIG_TSEC1
310#define CONFIG_HAS_ETH0
311#define CONFIG_TSEC1_NAME "TSEC1"
312#define CONFIG_SYS_TSEC1_OFFSET 0x24000
313#define TSEC1_PHY_ADDR 0x01
314#define TSEC1_FLAGS 0
315#define TSEC1_PHYIDX 0
316#endif
317
318/* Options are: TSEC[0-1] */
319#define CONFIG_ETHPRIME "TSEC1"
320
321/*
322 * Environment
323 */
324#define CONFIG_ENV_IS_IN_FLASH 1
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500325#define CONFIG_ENV_ADDR \
326 (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200327#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
328#define CONFIG_ENV_SIZE 0x4000
329/* Address and size of Redundant Environment Sector */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500330#define CONFIG_ENV_OFFSET_REDUND \
331 (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200332#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
333
334#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
335#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
336
337/*
338 * BOOTP options
339 */
340#define CONFIG_BOOTP_BOOTFILESIZE
341#define CONFIG_BOOTP_BOOTPATH
342#define CONFIG_BOOTP_GATEWAY
343#define CONFIG_BOOTP_HOSTNAME
344
345/*
346 * Command line configuration.
347 */
348#include <config_cmd_default.h>
349
350#define CONFIG_CMD_DHCP
351#define CONFIG_CMD_MII
352#define CONFIG_CMD_PING
353#define CONFIG_CMD_PCI
354
355#define CONFIG_CMDLINE_EDITING 1
356#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
357
358/*
359 * Miscellaneous configurable options
360 */
361#define CONFIG_SYS_LONGHELP /* undef to save memory */
362#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
363#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
364#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
365
366#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
367#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
368#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg Buffer size */
369#define CONFIG_SYS_HZ 1000 /* 1ms ticks */
370
371/*
372 * For booting Linux, the board info and command line data
Ira W. Snyder9f530d52010-09-10 15:42:32 -0700373 * have to be in the first 256 MB of memory, since this is
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200374 * the maximum mapped by the Linux kernel during initialization.
375 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500376 /* Initial Memory map for Linux*/
377#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200378
379/* 0x64050000 */
380#define CONFIG_SYS_HRCW_LOW (\
381 0x20000000 /* reserved, must be set */ |\
382 HRCWL_DDRCM |\
383 HRCWL_CSB_TO_CLKIN_4X1 | \
384 HRCWL_CORE_TO_CSB_2_5X1)
385
386/* 0xa0600004 */
387#define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST | \
388 HRCWH_PCI_ARBITER_ENABLE | \
389 HRCWH_CORE_ENABLE | \
390 HRCWH_FROM_0X00000100 | \
391 HRCWH_BOOTSEQ_DISABLE |\
392 HRCWH_SW_WATCHDOG_DISABLE |\
393 HRCWH_ROM_LOC_LOCAL_16BIT | \
394 HRCWH_TSEC1M_IN_MII | \
395 HRCWH_BIG_ENDIAN | \
396 HRCWH_LALE_EARLY)
397
398/* System IO Config */
399#define CONFIG_SYS_SICRH (0x01000000 | \
400 SICRH_ETSEC2_B | \
401 SICRH_ETSEC2_C | \
402 SICRH_ETSEC2_D | \
403 SICRH_ETSEC2_E | \
404 SICRH_ETSEC2_F | \
405 SICRH_ETSEC2_G | \
406 SICRH_TSOBI1 | \
407 SICRH_TSOBI2)
408 /* 0x010fff03 */
409#define CONFIG_SYS_SICRL (SICRL_LBC | \
410 SICRL_SPI_A | \
411 SICRL_SPI_B | \
412 SICRL_SPI_C | \
413 SICRL_SPI_D | \
414 SICRL_ETSEC2_A)
415 /* 0x33fc0003) */
416
417#define CONFIG_SYS_HID0_INIT 0x000000000
418#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
419 HID0_ENABLE_INSTRUCTION_CACHE)
420
421#define CONFIG_SYS_HID2 HID2_HBE
422
423#define CONFIG_HIGH_BATS 1 /* High BATs supported */
424
425/* DDR @ 0x00000000 */
Joe Hershberger72cd4082011-10-11 23:57:28 -0500426#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW)
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500427#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \
428 | BATU_BL_256M \
429 | BATU_VS \
430 | BATU_VP)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200431
432#if defined(CONFIG_PCI)
433/* PCI @ 0x80000000 */
Joe Hershberger72cd4082011-10-11 23:57:28 -0500434#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW)
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500435#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \
436 | BATU_BL_256M \
437 | BATU_VS \
438 | BATU_VP)
439#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \
Joe Hershberger72cd4082011-10-11 23:57:28 -0500440 | BATL_PP_RW \
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500441 | BATL_CACHEINHIBIT \
442 | BATL_GUARDEDSTORAGE)
443#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \
444 | BATU_BL_256M \
445 | BATU_VS \
446 | BATU_VP)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200447#else
448#define CONFIG_SYS_IBAT1L (0)
449#define CONFIG_SYS_IBAT1U (0)
450#define CONFIG_SYS_IBAT2L (0)
451#define CONFIG_SYS_IBAT2U (0)
452#endif
453
454/* PCI2 not supported on 8313 */
455#define CONFIG_SYS_IBAT3L (0)
456#define CONFIG_SYS_IBAT3U (0)
457#define CONFIG_SYS_IBAT4L (0)
458#define CONFIG_SYS_IBAT4U (0)
459
460/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500461#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \
Joe Hershberger72cd4082011-10-11 23:57:28 -0500462 | BATL_PP_RW \
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500463 | BATL_CACHEINHIBIT \
464 | BATL_GUARDEDSTORAGE)
465#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \
466 | BATU_BL_256M \
467 | BATU_VS \
468 | BATU_VP)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200469
470/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
Joe Hershberger72cd4082011-10-11 23:57:28 -0500471#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200472#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
473
474/* FPGA, SRAM, NAND @ 0x60000000 */
Joe Hershberger72cd4082011-10-11 23:57:28 -0500475#define CONFIG_SYS_IBAT7L (0x60000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE)
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200476#define CONFIG_SYS_IBAT7U (0x60000000 | BATU_BL_256M | BATU_VS | BATU_VP)
477
478#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
479#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
480#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
481#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
482#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
483#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
484#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
485#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
486#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
487#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
488#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
489#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
490#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
491#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
492#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
493#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
494
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200495#define CONFIG_NETDEV eth0
496
497#define CONFIG_HOSTNAME ve8313
498#define CONFIG_UBOOTPATH ve8313/u-boot.bin
499
500#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
501#define CONFIG_BAUDRATE 115200
502
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200503#define CONFIG_EXTRA_ENV_SETTINGS \
Marek Vasut5368c552012-09-23 17:41:24 +0200504 "netdev=" __stringify(CONFIG_NETDEV) "\0" \
505 "ethprime=" __stringify(CONFIG_TSEC1_NAME) "\0" \
506 "u-boot=" __stringify(CONFIG_UBOOTPATH) "\0" \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200507 "u-boot_addr_r=100000\0" \
508 "load=tftp ${u-boot_addr_r} ${u-boot}\0" \
Marek Vasut5368c552012-09-23 17:41:24 +0200509 "update=protect off " __stringify(CONFIG_SYS_FLASH_BASE) \
510 " +${filesize};" \
511 "erase " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};" \
512 "cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_FLASH_BASE) \
Joe Hershbergerbe29fa72011-10-11 23:57:26 -0500513 " ${filesize};" \
Marek Vasut5368c552012-09-23 17:41:24 +0200514 "protect on " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize}\0" \
Heiko Schocher4e43b2e2010-07-07 12:26:34 +0200515
516#endif /* __CONFIG_H */