blob: eb632143e068a518041a83012645128a7dcb1bad [file] [log] [blame]
Alex Margineana7fdac72021-01-27 13:00:00 +02001// SPDX-License-Identifier: GPL-2.0+ OR X11
2/*
3 * NXP LS1028A-QDS device tree fragment for RCW 9999
4 *
Vladimir Oltean66fd01f2021-09-17 14:27:13 +03005 * Copyright 2019-2021 NXP
Alex Margineana7fdac72021-01-27 13:00:00 +02006 *
7 */
8
9/*
10 * This set-up is using SCH-24801 cards with VSC8234 quad SGMII PHY.
11 *
12 * Switch ports are mapped 1:1 to VSC8234 card ports seated in slot 1.
13 * Top port is port 0.
14 *
15 * The following DTS assumes DIP SW5[1-3] = 000b.
16 */
17
18&slot1 {
19 #include "fsl-sch-24801.dtsi"
20};
21
Vladimir Oltean39dca762021-06-29 20:53:11 +030022&enetc2 {
23 status = "okay";
24};
25
Alex Margineana7fdac72021-01-27 13:00:00 +020026&mscc_felix {
27 status = "okay";
28};
29
30&mscc_felix_port0 {
31 status = "okay";
32 phy-mode = "sgmii";
33 phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
34};
35
36&mscc_felix_port1 {
37 status = "okay";
38 phy-mode = "sgmii";
39 phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1d}>;
40};
41
42&mscc_felix_port2 {
43 status = "okay";
44 phy-mode = "sgmii";
45 phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>;
46};
47
48&mscc_felix_port3 {
49 status = "okay";
50 phy-mode = "sgmii";
51 phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
52};
Vladimir Oltean39dca762021-06-29 20:53:11 +030053
54&mscc_felix_port4 {
55 ethernet = <&enetc2>;
56 status = "okay";
57};