blob: d1beebee43e840c2381d80ee9bda96ed48c17525 [file] [log] [blame]
Beniamino Galvanidf42f322019-08-18 15:42:54 +02001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Meson8, Meson8b and GXBB USB2 PHY driver
4 *
5 * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
6 * Copyright (C) 2018 BayLibre, SAS
7 *
8 * Author: Beniamino Galvani <b.galvani@gmail.com>
9 */
10
11#include <common.h>
12#include <clk.h>
13#include <dm.h>
14#include <generic-phy.h>
15#include <power/regulator.h>
16#include <regmap.h>
17#include <reset.h>
Simon Glasscd93d622020-05-10 11:40:13 -060018#include <linux/bitops.h>
Beniamino Galvanidf42f322019-08-18 15:42:54 +020019
20#define REG_CONFIG 0x00
21 #define REG_CONFIG_CLK_EN BIT(0)
22 #define REG_CONFIG_CLK_SEL_MASK GENMASK(3, 1)
23 #define REG_CONFIG_CLK_DIV_MASK GENMASK(10, 4)
24 #define REG_CONFIG_CLK_32k_ALTSEL BIT(15)
25 #define REG_CONFIG_TEST_TRIG BIT(31)
26
27#define REG_CTRL 0x04
28 #define REG_CTRL_SOFT_PRST BIT(0)
29 #define REG_CTRL_SOFT_HRESET BIT(1)
30 #define REG_CTRL_SS_SCALEDOWN_MODE_MASK GENMASK(3, 2)
31 #define REG_CTRL_CLK_DET_RST BIT(4)
32 #define REG_CTRL_INTR_SEL BIT(5)
33 #define REG_CTRL_CLK_DETECTED BIT(8)
34 #define REG_CTRL_SOF_SENT_RCVD_TGL BIT(9)
35 #define REG_CTRL_SOF_TOGGLE_OUT BIT(10)
36 #define REG_CTRL_POWER_ON_RESET BIT(15)
37 #define REG_CTRL_SLEEPM BIT(16)
38 #define REG_CTRL_TX_BITSTUFF_ENN_H BIT(17)
39 #define REG_CTRL_TX_BITSTUFF_ENN BIT(18)
40 #define REG_CTRL_COMMON_ON BIT(19)
41 #define REG_CTRL_REF_CLK_SEL_MASK GENMASK(21, 20)
42 #define REG_CTRL_REF_CLK_SEL_SHIFT 20
43 #define REG_CTRL_FSEL_MASK GENMASK(24, 22)
44 #define REG_CTRL_FSEL_SHIFT 22
45 #define REG_CTRL_PORT_RESET BIT(25)
46 #define REG_CTRL_THREAD_ID_MASK GENMASK(31, 26)
47
48/* bits [31:26], [24:21] and [15:3] seem to be read-only */
49#define REG_ADP_BC 0x0c
50 #define REG_ADP_BC_VBUS_VLD_EXT_SEL BIT(0)
51 #define REG_ADP_BC_VBUS_VLD_EXT BIT(1)
52 #define REG_ADP_BC_OTG_DISABLE BIT(2)
53 #define REG_ADP_BC_ID_PULLUP BIT(3)
54 #define REG_ADP_BC_DRV_VBUS BIT(4)
55 #define REG_ADP_BC_ADP_PRB_EN BIT(5)
56 #define REG_ADP_BC_ADP_DISCHARGE BIT(6)
57 #define REG_ADP_BC_ADP_CHARGE BIT(7)
58 #define REG_ADP_BC_SESS_END BIT(8)
59 #define REG_ADP_BC_DEVICE_SESS_VLD BIT(9)
60 #define REG_ADP_BC_B_VALID BIT(10)
61 #define REG_ADP_BC_A_VALID BIT(11)
62 #define REG_ADP_BC_ID_DIG BIT(12)
63 #define REG_ADP_BC_VBUS_VALID BIT(13)
64 #define REG_ADP_BC_ADP_PROBE BIT(14)
65 #define REG_ADP_BC_ADP_SENSE BIT(15)
66 #define REG_ADP_BC_ACA_ENABLE BIT(16)
67 #define REG_ADP_BC_DCD_ENABLE BIT(17)
68 #define REG_ADP_BC_VDAT_DET_EN_B BIT(18)
69 #define REG_ADP_BC_VDAT_SRC_EN_B BIT(19)
70 #define REG_ADP_BC_CHARGE_SEL BIT(20)
71 #define REG_ADP_BC_CHARGE_DETECT BIT(21)
72 #define REG_ADP_BC_ACA_PIN_RANGE_C BIT(22)
73 #define REG_ADP_BC_ACA_PIN_RANGE_B BIT(23)
74 #define REG_ADP_BC_ACA_PIN_RANGE_A BIT(24)
75 #define REG_ADP_BC_ACA_PIN_GND BIT(25)
76 #define REG_ADP_BC_ACA_PIN_FLOAT BIT(26)
77
78#define RESET_COMPLETE_TIME 500
79#define ACA_ENABLE_COMPLETE_TIME 50
80
81struct phy_meson_gxbb_usb2_priv {
82 struct regmap *regmap;
83 struct reset_ctl_bulk resets;
84#if CONFIG_IS_ENABLED(DM_REGULATOR)
85 struct udevice *phy_supply;
86#endif
87};
88
89static int phy_meson_gxbb_usb2_power_on(struct phy *phy)
90{
91 struct udevice *dev = phy->dev;
92 struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
93 uint val;
94
95#if CONFIG_IS_ENABLED(DM_REGULATOR)
96 if (priv->phy_supply) {
97 int ret = regulator_set_enable(priv->phy_supply, true);
98
99 if (ret)
100 return ret;
101 }
102#endif
103
104 regmap_update_bits(priv->regmap, REG_CONFIG,
105 REG_CONFIG_CLK_32k_ALTSEL,
106 REG_CONFIG_CLK_32k_ALTSEL);
107 regmap_update_bits(priv->regmap, REG_CTRL,
108 REG_CTRL_REF_CLK_SEL_MASK,
109 0x2 << REG_CTRL_REF_CLK_SEL_SHIFT);
110 regmap_update_bits(priv->regmap, REG_CTRL,
111 REG_CTRL_FSEL_MASK,
112 0x5 << REG_CTRL_FSEL_SHIFT);
113
114 /* reset the PHY */
115 regmap_update_bits(priv->regmap, REG_CTRL,
116 REG_CTRL_POWER_ON_RESET,
117 REG_CTRL_POWER_ON_RESET);
118 udelay(RESET_COMPLETE_TIME);
119 regmap_update_bits(priv->regmap, REG_CTRL,
120 REG_CTRL_POWER_ON_RESET,
121 0);
122 udelay(RESET_COMPLETE_TIME);
123
124 regmap_update_bits(priv->regmap, REG_CTRL,
125 REG_CTRL_SOF_TOGGLE_OUT,
126 REG_CTRL_SOF_TOGGLE_OUT);
127
128 /* Set host mode */
129 regmap_update_bits(priv->regmap, REG_ADP_BC,
130 REG_ADP_BC_ACA_ENABLE,
131 REG_ADP_BC_ACA_ENABLE);
132 udelay(ACA_ENABLE_COMPLETE_TIME);
133
134 regmap_read(priv->regmap, REG_ADP_BC, &val);
135 if (val & REG_ADP_BC_ACA_PIN_FLOAT) {
136 pr_err("Error powering on GXBB USB PHY\n");
137 return -EINVAL;
138 }
139
140 return 0;
141}
142
143static int phy_meson_gxbb_usb2_power_off(struct phy *phy)
144{
145#if CONFIG_IS_ENABLED(DM_REGULATOR)
146 struct udevice *dev = phy->dev;
147 struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
148
149 if (priv->phy_supply) {
150 int ret = regulator_set_enable(priv->phy_supply, false);
151
152 if (ret)
153 return ret;
154 }
155#endif
156
157 return 0;
158}
159
160static struct phy_ops meson_gxbb_usb2_phy_ops = {
161 .power_on = phy_meson_gxbb_usb2_power_on,
162 .power_off = phy_meson_gxbb_usb2_power_off,
163};
164
165static int meson_gxbb_usb2_phy_probe(struct udevice *dev)
166{
167 struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
168 struct clk clk_usb_general, clk_usb;
169 int ret;
170
171 ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
172 if (ret)
173 return ret;
174
175 ret = clk_get_by_name(dev, "usb_general", &clk_usb_general);
176 if (ret)
177 return ret;
178
179 ret = clk_enable(&clk_usb_general);
180 if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
181 pr_err("Failed to enable PHY general clock\n");
182 return ret;
183 }
184
185 ret = clk_get_by_name(dev, "usb", &clk_usb);
186 if (ret)
187 return ret;
188
189 ret = clk_enable(&clk_usb);
190 if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
191 pr_err("Failed to enable PHY clock\n");
192 return ret;
193 }
194
195#if CONFIG_IS_ENABLED(DM_REGULATOR)
196 ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
197 if (ret && ret != -ENOENT) {
198 pr_err("Failed to get PHY regulator\n");
199 return ret;
200 }
201#endif
202 ret = reset_get_bulk(dev, &priv->resets);
203 if (!ret) {
204 ret = reset_deassert_bulk(&priv->resets);
205 if (ret) {
206 pr_err("Failed to deassert reset\n");
207 return ret;
208 }
209 }
210
211 return 0;
212}
213
214static int meson_gxbb_usb2_phy_remove(struct udevice *dev)
215{
216 struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
217
218 return reset_release_bulk(&priv->resets);
219}
220
221static const struct udevice_id meson_gxbb_usb2_phy_ids[] = {
222 { .compatible = "amlogic,meson8-usb2-phy" },
223 { .compatible = "amlogic,meson8b-usb2-phy" },
224 { .compatible = "amlogic,meson-gxbb-usb2-phy" },
225 { }
226};
227
228U_BOOT_DRIVER(meson_gxbb_usb2_phy) = {
229 .name = "meson_gxbb_usb2_phy",
230 .id = UCLASS_PHY,
231 .of_match = meson_gxbb_usb2_phy_ids,
232 .probe = meson_gxbb_usb2_phy_probe,
233 .remove = meson_gxbb_usb2_phy_remove,
234 .ops = &meson_gxbb_usb2_phy_ops,
235 .priv_auto_alloc_size = sizeof(struct phy_meson_gxbb_usb2_priv),
236};