Patrick Wildt | e72cb77 | 2022-01-08 16:04:55 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | |
| 3 | /* |
| 4 | * Copyright 2019-2021 MNT Research GmbH |
| 5 | * Copyright 2021 Lucas Stach <dev@lynxeye.de> |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include "imx8mq-nitrogen-som.dtsi" |
| 11 | |
| 12 | / { |
| 13 | model = "MNT Reform 2"; |
| 14 | compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq"; |
| 15 | |
| 16 | pcie1_refclk: clock-pcie1-refclk { |
| 17 | compatible = "fixed-clock"; |
| 18 | #clock-cells = <0>; |
| 19 | clock-frequency = <100000000>; |
| 20 | }; |
| 21 | |
| 22 | reg_main_5v: regulator-main-5v { |
| 23 | compatible = "regulator-fixed"; |
| 24 | regulator-name = "5V"; |
| 25 | regulator-min-microvolt = <5000000>; |
| 26 | regulator-max-microvolt = <5000000>; |
| 27 | }; |
| 28 | |
| 29 | reg_main_3v3: regulator-main-3v3 { |
| 30 | compatible = "regulator-fixed"; |
| 31 | regulator-name = "3V3"; |
| 32 | regulator-min-microvolt = <3300000>; |
| 33 | regulator-max-microvolt = <3300000>; |
| 34 | }; |
| 35 | |
| 36 | reg_main_usb: regulator-main-usb { |
| 37 | compatible = "regulator-fixed"; |
| 38 | regulator-name = "USB_PWR"; |
| 39 | regulator-min-microvolt = <5000000>; |
| 40 | regulator-max-microvolt = <5000000>; |
| 41 | vin-supply = <®_main_5v>; |
| 42 | }; |
| 43 | |
| 44 | sound { |
| 45 | compatible = "fsl,imx-audio-wm8960"; |
| 46 | audio-cpu = <&sai2>; |
| 47 | audio-codec = <&wm8960>; |
| 48 | audio-routing = |
| 49 | "Headphone Jack", "HP_L", |
| 50 | "Headphone Jack", "HP_R", |
| 51 | "Ext Spk", "SPK_LP", |
| 52 | "Ext Spk", "SPK_LN", |
| 53 | "Ext Spk", "SPK_RP", |
| 54 | "Ext Spk", "SPK_RN", |
| 55 | "LINPUT1", "Mic Jack", |
| 56 | "Mic Jack", "MICB", |
| 57 | "LINPUT2", "Line In Jack", |
| 58 | "RINPUT2", "Line In Jack"; |
| 59 | model = "wm8960-audio"; |
| 60 | }; |
| 61 | }; |
| 62 | |
| 63 | &fec1 { |
| 64 | status = "okay"; |
| 65 | }; |
| 66 | |
| 67 | &i2c3 { |
| 68 | pinctrl-names = "default"; |
| 69 | pinctrl-0 = <&pinctrl_i2c3>; |
| 70 | status = "okay"; |
| 71 | |
| 72 | wm8960: codec@1a { |
| 73 | compatible = "wlf,wm8960"; |
| 74 | reg = <0x1a>; |
| 75 | clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; |
| 76 | clock-names = "mclk"; |
| 77 | #sound-dai-cells = <0>; |
| 78 | }; |
| 79 | |
| 80 | rtc@68 { |
| 81 | compatible = "nxp,pcf8523"; |
| 82 | reg = <0x68>; |
| 83 | }; |
| 84 | }; |
| 85 | |
| 86 | &pcie1 { |
| 87 | pinctrl-names = "default"; |
| 88 | pinctrl-0 = <&pinctrl_pcie1>; |
| 89 | reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>; |
| 90 | clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, |
| 91 | <&clk IMX8MQ_CLK_PCIE2_AUX>, |
| 92 | <&clk IMX8MQ_CLK_PCIE2_PHY>, |
| 93 | <&pcie1_refclk>; |
| 94 | clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; |
| 95 | status = "okay"; |
| 96 | }; |
| 97 | |
| 98 | ®_1p8v { |
| 99 | vin-supply = <®_main_5v>; |
| 100 | }; |
| 101 | |
| 102 | ®_snvs { |
| 103 | vin-supply = <®_main_5v>; |
| 104 | }; |
| 105 | |
| 106 | ®_arm_dram { |
| 107 | vin-supply = <®_main_5v>; |
| 108 | }; |
| 109 | |
| 110 | ®_dram_1p1v { |
| 111 | vin-supply = <®_main_5v>; |
| 112 | }; |
| 113 | |
| 114 | ®_soc_gpu_vpu { |
| 115 | vin-supply = <®_main_5v>; |
| 116 | }; |
| 117 | |
| 118 | &sai2 { |
| 119 | pinctrl-names = "default"; |
| 120 | pinctrl-0 = <&pinctrl_sai2>; |
| 121 | assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; |
| 122 | assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; |
| 123 | assigned-clock-rates = <25000000>; |
| 124 | fsl,sai-mclk-direction-output; |
| 125 | fsl,sai-asynchronous; |
| 126 | status = "okay"; |
| 127 | }; |
| 128 | |
| 129 | &snvs_rtc { |
| 130 | status = "disabled"; |
| 131 | }; |
| 132 | |
| 133 | &uart2 { |
| 134 | pinctrl-names = "default"; |
| 135 | pinctrl-0 = <&pinctrl_uart2>; |
| 136 | status = "okay"; |
| 137 | }; |
| 138 | |
| 139 | &usb3_phy0 { |
| 140 | vbus-supply = <®_main_usb>; |
| 141 | status = "okay"; |
| 142 | }; |
| 143 | |
| 144 | &usb3_phy1 { |
| 145 | vbus-supply = <®_main_usb>; |
| 146 | status = "okay"; |
| 147 | }; |
| 148 | |
| 149 | &usb_dwc3_0 { |
| 150 | dr_mode = "host"; |
| 151 | status = "okay"; |
| 152 | }; |
| 153 | |
| 154 | &usb_dwc3_1 { |
| 155 | dr_mode = "host"; |
| 156 | status = "okay"; |
| 157 | }; |
| 158 | |
| 159 | &usdhc2 { |
| 160 | assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; |
| 161 | assigned-clock-rates = <200000000>; |
| 162 | pinctrl-names = "default"; |
| 163 | pinctrl-0 = <&pinctrl_usdhc2>; |
| 164 | vqmmc-supply = <®_main_3v3>; |
| 165 | vmmc-supply = <®_main_3v3>; |
| 166 | bus-width = <4>; |
| 167 | status = "okay"; |
| 168 | }; |
| 169 | |
| 170 | &iomuxc { |
| 171 | pinctrl_i2c3: i2c3grp { |
| 172 | fsl,pins = < |
| 173 | MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f |
| 174 | MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f |
| 175 | >; |
| 176 | }; |
| 177 | |
| 178 | pinctrl_pcie1: pcie1grp { |
| 179 | fsl,pins = < |
| 180 | MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x16 |
| 181 | >; |
| 182 | }; |
| 183 | |
| 184 | pinctrl_sai2: sai2grp { |
| 185 | fsl,pins = < |
| 186 | MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 |
| 187 | MX8MQ_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0xd6 |
| 188 | MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 |
| 189 | MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 |
| 190 | MX8MQ_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0xd6 |
| 191 | MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 |
| 192 | MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 |
| 193 | >; |
| 194 | }; |
| 195 | |
| 196 | pinctrl_uart2: uart2grp { |
| 197 | fsl,pins = < |
| 198 | MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x45 |
| 199 | MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45 |
| 200 | >; |
| 201 | }; |
| 202 | |
| 203 | pinctrl_usdhc2: usdhc2grp { |
| 204 | fsl,pins = < |
| 205 | MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0 |
| 206 | MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 |
| 207 | MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 |
| 208 | MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 |
| 209 | MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 |
| 210 | MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 |
| 211 | MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 |
| 212 | >; |
| 213 | }; |
| 214 | }; |