blob: 03b9393c9b09ffcfa410813d900d8cdc492020a7 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Albert ARIBAUD35629362015-10-23 18:06:43 +02002/*
3 * (C) Copyright 2009
4 * Net Insight <www.netinsight.net>
5 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
6 *
7 * Based on sheevaplug.h:
8 * (C) Copyright 2009
9 * Marvell Semiconductor <www.marvell.com>
10 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
Albert ARIBAUD35629362015-10-23 18:06:43 +020011 */
12
13#ifndef _CONFIG_OPENRD_H
14#define _CONFIG_OPENRD_H
15
16/*
Albert ARIBAUD35629362015-10-23 18:06:43 +020017 * High Level Configuration Options (easy to change)
18 */
19#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
20#define CONFIG_KW88F6281 1 /* SOC Name */
Albert ARIBAUD35629362015-10-23 18:06:43 +020021#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
Albert ARIBAUD35629362015-10-23 18:06:43 +020022
Albert ARIBAUD35629362015-10-23 18:06:43 +020023#include "mv-common.h"
24
25/*
26 * Environment variables configurations
27 */
Albert ARIBAUD35629362015-10-23 18:06:43 +020028/*
29 * max 4k env size is enough, but in case of nand
30 * it has to be rounded to sector size
31 */
Albert ARIBAUD35629362015-10-23 18:06:43 +020032/*
33 * Environment is right behind U-Boot in flash. Make sure U-Boot
34 * doesn't grow into the environment area.
35 */
36#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
37
38/*
39 * Default environment variables
40 */
41#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
42 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
43 "${x_bootcmd_usb}; bootm 0x6400000;"
44
Tom Rini43ede0b2017-10-22 17:55:07 -040045#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \
46 CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
Albert ARIBAUD35629362015-10-23 18:06:43 +020047 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
48 "x_bootcmd_usb=usb start\0" \
Tom Rini11e40922018-07-27 07:56:59 -040049 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"
Albert ARIBAUD35629362015-10-23 18:06:43 +020050
51/*
52 * Ethernet Driver configuration
53 */
54#ifdef CONFIG_CMD_NET
55# ifdef CONFIG_BOARD_IS_OPENRD_BASE
56# define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
57# else
58# define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
59# endif
60# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
61# define CONFIG_PHY_BASE_ADR 0x0
62# define PHY_NO "88E1121"
63# else
64# define CONFIG_PHY_BASE_ADR 0x8
65# define PHY_NO "88E1116"
66# endif
67#endif /* CONFIG_CMD_NET */
68
69/*
70 * SATA Driver configuration
71 */
72#ifdef CONFIG_MVSATA_IDE
73#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
74#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
75#endif /*CONFIG_MVSATA_IDE*/
76
Albert ARIBAUD35629362015-10-23 18:06:43 +020077#endif /* _CONFIG_OPENRD_BASE_H */