| Chris Zankel | c978b52 | 2016-08-10 18:36:44 +0300 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2008 - 2013 Tensilica, Inc. |
| 3 | * (C) Copyright 2014 - 2016 Cadence Design Systems Inc. |
| 4 | * |
| 5 | * SPDX-License-Identifier: GPL-2.0+ |
| 6 | */ |
| 7 | |
| 8 | #include <config.h> |
| 9 | #include <asm/ldscript.h> |
| 10 | #include <asm/arch/core.h> |
| 11 | #include <asm/addrspace.h> |
| 12 | #include <asm-offsets.h> |
| 13 | |
| 14 | OUTPUT_ARCH(xtensa) |
| 15 | ENTRY(_start) |
| 16 | |
| 17 | /* |
| 18 | * U-Boot resets from SYSROM and unpacks itself from a ROM store to RAM. |
| 19 | * The reset vector is usually near the base of SYSROM and has room |
| 20 | * above it for the ROM store into which the rest of U-Boot is packed. |
| 21 | * The ROM store also needs to be above any other vectors that are in ROM. |
| 22 | * If a core has its vectors near the top of ROM, this must be edited. |
| 23 | * |
| 24 | * Note that to run C code out of ROM, the processor would have to support |
| 25 | * 'relocatable' exception vectors and provide a scratch memory for the |
| 26 | * initial stack. Not all Xtensa processor configurations support that, so |
| 27 | * we can simplify the boot process and unpack U-Boot to RAM immediately. |
| 28 | * This, however, requires that memory have been initialized throug some |
| 29 | * other means (serial ROM, for example) or are initialized early (requiring |
| 30 | * an assembler function. See start.S for more details) |
| 31 | */ |
| 32 | |
| 33 | SECTIONS |
| 34 | { |
| 35 | . = + SIZEOF_HEADERS; |
| 36 | SECTION_ResetVector(XCHAL_RESET_VECTOR_VADDR, LMA_EQ_VMA) |
| 37 | |
| 38 | .reloc_table ALIGN(4) : FOLLOWING(.ResetVector.text) |
| 39 | { |
| 40 | __reloc_table_start = ABSOLUTE(.); |
| 41 | #if XCHAL_HAVE_WINDOWED |
| 42 | RELOCATE2(WindowVectors,text); |
| 43 | #endif |
| 44 | RELOCATE2(KernelExceptionVector,literal); |
| 45 | RELOCATE2(KernelExceptionVector,text); |
| 46 | RELOCATE2(UserExceptionVector,literal); |
| 47 | RELOCATE2(UserExceptionVector,text); |
| 48 | RELOCATE2(DoubleExceptionVector,literal); |
| 49 | RELOCATE2(DoubleExceptionVector,text); |
| 50 | RELOCATE1(text); |
| 51 | RELOCATE1(rodata); |
| 52 | RELOCATE1(data); |
| 53 | RELOCATE1(u_boot_list); |
| 54 | __reloc_table_end = ABSOLUTE(.); |
| 55 | } |
| 56 | |
| 57 | #if XCHAL_HAVE_WINDOWED |
| 58 | SECTION_VECTOR(WindowVectors,text,XCHAL_WINDOW_VECTORS_VADDR, |
| 59 | FOLLOWING(.reloc_table)) |
| 60 | SECTION_VECTOR(KernelExceptionVector,literal,XCHAL_KERNEL_VECTOR_VADDR-8, |
| 61 | FOLLOWING(.WindowVectors.text)) |
| 62 | #else |
| 63 | SECTION_VECTOR(KernelExceptionVector,literal,XCHAL_KERNEL_VECTOR_VADDR-8, |
| 64 | FOLLOWING(.reloc_table)) |
| 65 | #endif |
| 66 | SECTION_VECTOR(KernelExceptionVector,text,XCHAL_KERNEL_VECTOR_VADDR, |
| 67 | FOLLOWING(.KernelExceptionVector.literal)) |
| 68 | SECTION_VECTOR(UserExceptionVector,literal,XCHAL_USER_VECTOR_VADDR-8, |
| 69 | FOLLOWING(.KernelExceptionVector.text)) |
| 70 | SECTION_VECTOR(UserExceptionVector,text,XCHAL_USER_VECTOR_VADDR, |
| 71 | FOLLOWING(.UserExceptionVector.literal)) |
| 72 | SECTION_VECTOR(DoubleExceptionVector,literal,XCHAL_DOUBLEEXC_VECTOR_VADDR-8, |
| 73 | FOLLOWING(.UserExceptionVector.text)) |
| 74 | SECTION_VECTOR(DoubleExceptionVector,text,XCHAL_DOUBLEEXC_VECTOR_VADDR, |
| 75 | FOLLOWING(.DoubleExceptionVector.literal)) |
| 76 | |
| 77 | __monitor_start = CONFIG_SYS_TEXT_ADDR; |
| 78 | |
| 79 | SECTION_text(CONFIG_SYS_TEXT_ADDR, FOLLOWING(.DoubleExceptionVector.text)) |
| 80 | SECTION_rodata(ALIGN(16), FOLLOWING(.text)) |
| 81 | SECTION_u_boot_list(ALIGN(16), FOLLOWING(.rodata)) |
| 82 | SECTION_data(ALIGN(16), FOLLOWING(.u_boot_list)) |
| 83 | |
| 84 | __reloc_end = .; |
| 85 | __init_end = .; |
| 86 | |
| 87 | SECTION_bss(__init_end (OVERLAY),) |
| 88 | |
| 89 | __monitor_end = .; |
| 90 | |
| 91 | /* |
| 92 | * On many Xtensa boards a region of RAM may be mapped to the ROM address |
| 93 | * space to facilitate on-chip-debug, and U-Boot must fit with that region. |
| 94 | * The config variables CONFIG_SYS_MONITOR_* define the region. |
| 95 | * If U-Boot extends beyond this region it will appear discontiguous in the |
| 96 | * address space and is in danger of overwriting itself during unpacking |
| 97 | * ("relocation"). |
| 98 | * This causes U-Boot to crash in a way that is difficult to debug. On some |
| 99 | * boards (such as xtav60) the region is small enough that U-Boot will not |
| 100 | * fit if compiled entirely with -O0 (a common scenario). To avoid a lengthy |
| 101 | * debugging session when this happens, ensure a link-time error occurs. |
| 102 | * |
| 103 | */ |
| 104 | |
| 105 | ASSERT(__monitor_end - __monitor_start <= CONFIG_SYS_MONITOR_LEN, |
| 106 | "U-Boot ROM image is too large. Check optimization level.") |
| 107 | |
| 108 | SECTION_xtensa |
| 109 | SECTION_debug |
| 110 | |
| 111 | /DISCARD/ : { *(.dynstr*) } |
| 112 | /DISCARD/ : { *(.hash*) } |
| 113 | /DISCARD/ : { *(.interp) } |
| 114 | /DISCARD/ : { *(.got*) } |
| 115 | /DISCARD/ : { *(.dynsym) } |
| 116 | } |