blob: 25f3a26f35fd64ad1d5e155af470c18dd8051344 [file] [log] [blame]
stroesea20b27a2004-12-16 18:05:42 +00001/*
2 * Configuation settings for the esd TASREG board.
3 *
4 * (C) Copyright 2004
5 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26/*
27 * board/config.h - configuration options, board specific
28 */
29
30#ifndef _TASREG_H
31#define _TASREG_H
32
33#ifndef __ASSEMBLY__
34#include <asm/m5249.h>
35#endif
36
37/*
38 * High Level Configuration Options
39 * (easy to change)
40 */
41#define CONFIG_MCF52x2 /* define processor family */
42#define CONFIG_M5249 /* define processor type */
43
44#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
45
TsiChungLiewaa93d852007-08-15 19:46:38 -050046#define CONFIG_MCFTMR
47
48#define CONFIG_MCFUART
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020049#define CONFIG_SYS_UART_PORT (0)
stroesea20b27a2004-12-16 18:05:42 +000050#define CONFIG_BAUDRATE 19200
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020051#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
stroesea20b27a2004-12-16 18:05:42 +000052
53#undef CONFIG_WATCHDOG
54
55#undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */
56
stroesea20b27a2004-12-16 18:05:42 +000057
Jon Loeligera5562902007-07-08 15:31:57 -050058/*
Jon Loeligera1aa0bb2007-07-10 09:22:23 -050059 * BOOTP options
60 */
61#define CONFIG_BOOTP_BOOTFILESIZE
62#define CONFIG_BOOTP_BOOTPATH
63#define CONFIG_BOOTP_GATEWAY
64#define CONFIG_BOOTP_HOSTNAME
65
66
67/*
Jon Loeligera5562902007-07-08 15:31:57 -050068 * Command line configuration.
69 */
70#include <config_cmd_default.h>
71
72#define CONFIG_CMD_BSP
73#define CONFIG_CMD_EEPROM
74#define CONFIG_CMD_I2C
75
76#undef CONFIG_CMD_NET
77
78
stroesea20b27a2004-12-16 18:05:42 +000079#define CONFIG_BOOTDELAY 3
80
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020081#define CONFIG_SYS_PROMPT "=> "
82#define CONFIG_SYS_LONGHELP /* undef to save memory */
stroesea20b27a2004-12-16 18:05:42 +000083
Jon Loeligera5562902007-07-08 15:31:57 -050084#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020085#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
stroesea20b27a2004-12-16 18:05:42 +000086#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020087#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
stroesea20b27a2004-12-16 18:05:42 +000088#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020089#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
90#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
91#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
stroesea20b27a2004-12-16 18:05:42 +000092
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020093#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
94#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
stroesea20b27a2004-12-16 18:05:42 +000095#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
96#define CONFIG_LOOPW 1 /* enable loopw command */
97#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
98
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020099#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
stroesea20b27a2004-12-16 18:05:42 +0000100
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200101#define CONFIG_SYS_MEMTEST_START 0x400
102#define CONFIG_SYS_MEMTEST_END 0x380000
stroesea20b27a2004-12-16 18:05:42 +0000103
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200104#define CONFIG_SYS_HZ 1000
stroesea20b27a2004-12-16 18:05:42 +0000105
106/*
107 * Clock configuration: enable only one of the following options
108 */
109
110#if 0 /* this setting will run the cpu at 11MHz */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200111#define CONFIG_SYS_PLL_BYPASS 1 /* bypass PLL for test purpose */
112#undef CONFIG_SYS_FAST_CLK /* MCF5249 can run at 140MHz */
113#define CONFIG_SYS_CLK 11289600 /* PLL bypass */
stroesea20b27a2004-12-16 18:05:42 +0000114#endif
115
116#if 0 /* this setting will run the cpu at 70MHz */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200117#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */
118#undef CONFIG_SYS_FAST_CLK /* MCF5249 can run at 140MHz */
119#define CONFIG_SYS_CLK 72185018 /* The next lower speed */
stroesea20b27a2004-12-16 18:05:42 +0000120#endif
121
122#if 1 /* this setting will run the cpu at 140MHz */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200123#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */
124#define CONFIG_SYS_FAST_CLK 1 /* MCF5249 can run at 140MHz */
125#define CONFIG_SYS_CLK 132025600 /* MCF5249 can run at 140MHz */
stroesea20b27a2004-12-16 18:05:42 +0000126#endif
127
128/*
129 * Low Level Configuration Settings
130 * (address mappings, register initial values, etc.)
131 * You should know what you are doing if you make changes here.
132 */
133
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200134#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */
135#define CONFIG_SYS_MBAR2 0x80000000
stroesea20b27a2004-12-16 18:05:42 +0000136
137/*-----------------------------------------------------------------------
138 * I2C
139 */
140#define CONFIG_SOFT_I2C
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200141#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
142#define CONFIG_SYS_I2C_SLAVE 0x7F
143#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC32 */
144#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
stroesea20b27a2004-12-16 18:05:42 +0000145/* mask of address bits that overflow into the "EEPROM chip address" */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200146#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
147#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */
stroesea20b27a2004-12-16 18:05:42 +0000148 /* 32 byte page write mode using*/
149 /* last 5 bits of the address */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200150#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
stroesea20b27a2004-12-16 18:05:42 +0000151
152#if defined (CONFIG_SOFT_I2C)
153#if 0 /* push-pull */
154#define SDA 0x00800000
155#define SCL 0x00000008
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200156#define DIR0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_EN))
157#define DIR1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_EN))
158#define OUT0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_OUT))
159#define OUT1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_OUT))
160#define IN0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_READ))
161#define IN1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_READ))
stroesea20b27a2004-12-16 18:05:42 +0000162#define I2C_INIT {OUT1|=SDA;OUT0|=SCL;}
163#define I2C_READ ((IN1&SDA)?1:0)
164#define I2C_SDA(x) {if(x)OUT1|=SDA;else OUT1&=~SDA;}
165#define I2C_SCL(x) {if(x)OUT0|=SCL;else OUT0&=~SCL;}
166#define I2C_DELAY {udelay(5);}
167#define I2C_ACTIVE {DIR1|=SDA;}
168#define I2C_TRISTATE {DIR1&=~SDA;}
169#else /* open-collector */
170#define SDA 0x00800000
171#define SCL 0x00000008
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200172#define DIR0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_EN))
173#define DIR1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_EN))
174#define OUT0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_OUT))
175#define OUT1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_OUT))
176#define IN0 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO_READ))
177#define IN1 *((volatile ulong*)(CONFIG_SYS_MBAR2+MCFSIM_GPIO1_READ))
stroesea20b27a2004-12-16 18:05:42 +0000178#define I2C_INIT {DIR1&=~SDA;DIR0&=~SCL;OUT1&=~SDA;OUT0&=~SCL;}
179#define I2C_READ ((IN1&SDA)?1:0)
180#define I2C_SDA(x) {if(x)DIR1&=~SDA;else DIR1|=SDA;}
181#define I2C_SCL(x) {if(x)DIR0&=~SCL;else DIR0|=SCL;}
182#define I2C_DELAY {udelay(5);}
183#define I2C_ACTIVE {DIR1|=SDA;}
184#define I2C_TRISTATE {DIR1&=~SDA;}
185#endif
186#endif
187
188/*-----------------------------------------------------------------------
189 * Definitions for initial stack pointer and data area (in DPRAM)
190 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200191#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
192#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */
193#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
194#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
195#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
stroesea20b27a2004-12-16 18:05:42 +0000196
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200197#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200198#define CONFIG_ENV_ADDR 0xFFC40000 /* Address of Environment Sector*/
199#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
200#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
stroesea20b27a2004-12-16 18:05:42 +0000201
202/*-----------------------------------------------------------------------
203 * Start addresses for the final memory configuration
204 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200205 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
stroesea20b27a2004-12-16 18:05:42 +0000206 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200207#define CONFIG_SYS_SDRAM_BASE 0x00000000
208#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
TsiChung Liew012522f2008-10-21 10:03:07 +0000209#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
stroesea20b27a2004-12-16 18:05:42 +0000210
211#if 0 /* test-only */
212#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
213#endif
214
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200215#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
stroesea20b27a2004-12-16 18:05:42 +0000216
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200217#define CONFIG_SYS_MONITOR_LEN 0x20000
218#define CONFIG_SYS_MALLOC_LEN (1 * 1024*1024) /* Reserve 1 MB for malloc() */
219#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
stroesea20b27a2004-12-16 18:05:42 +0000220
221/*
222 * For booting Linux, the board info and command line data
223 * have to be in the first 8 MB of memory, since this is
224 * the maximum mapped by the Linux kernel during initialization ??
225 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200226#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
stroesea20b27a2004-12-16 18:05:42 +0000227
228/*-----------------------------------------------------------------------
229 * FLASH organization
230 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200231#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
232#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
stroesea20b27a2004-12-16 18:05:42 +0000233
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200234#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
235#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
stroesea20b27a2004-12-16 18:05:42 +0000236
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200237#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
238#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
239#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
stroesea20b27a2004-12-16 18:05:42 +0000240/*
241 * The following defines are added for buggy IOP480 byte interface.
242 * All other boards should use the standard values (CPCI405 etc.)
243 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200244#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
245#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
246#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
stroesea20b27a2004-12-16 18:05:42 +0000247
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200248#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
stroesea20b27a2004-12-16 18:05:42 +0000249
250/*-----------------------------------------------------------------------
251 * Cache Configuration
252 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200253#define CONFIG_SYS_CACHELINE_SIZE 16
stroesea20b27a2004-12-16 18:05:42 +0000254
255/*-----------------------------------------------------------------------
256 * Memory bank definitions
257 */
258
259/* CS0 - AMD Flash, address 0xffc00000 */
TsiChung Liew012522f2008-10-21 10:03:07 +0000260#define CONFIG_SYS_CS0_BASE 0xffc00000
261#define CONFIG_SYS_CS0_CTRL 0x00001980 /* WS=0110, AA=1, PS=10 */
stroesea20b27a2004-12-16 18:05:42 +0000262/** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/
TsiChung Liew012522f2008-10-21 10:03:07 +0000263#define CONFIG_SYS_CS0_MASK 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */
stroesea20b27a2004-12-16 18:05:42 +0000264
265/* CS1 - FPGA, address 0xe0000000 */
TsiChung Liew012522f2008-10-21 10:03:07 +0000266#define CONFIG_SYS_CS1_BASE 0xe0000000
267#define CONFIG_SYS_CS1_CTRL 0x00000d80 /* WS=0011, AA=1, PS=10 */
268#define CONFIG_SYS_CS1_MASK 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/
stroesea20b27a2004-12-16 18:05:42 +0000269
270/*-----------------------------------------------------------------------
271 * Port configuration
272 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */
274#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/
275#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */
276#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */
277#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */
278#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */
stroesea20b27a2004-12-16 18:05:42 +0000279
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200280#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */
stroesea20b27a2004-12-16 18:05:42 +0000281
282/*-----------------------------------------------------------------------
283 * FPGA stuff
284 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200285#define CONFIG_SYS_FPGA_SPARTAN2 1 /* using Xilinx Spartan 2 now */
286#define CONFIG_SYS_FPGA_MAX_SIZE 512*1024 /* 512kByte is enough for XC2S200*/
stroesea20b27a2004-12-16 18:05:42 +0000287
288/* FPGA program pin configuration */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200289#define CONFIG_SYS_FPGA_PRG 0x00010000 /* FPGA program pin (ppc output) */
290#define CONFIG_SYS_FPGA_CLK 0x00040000 /* FPGA clk pin (ppc output) */
291#define CONFIG_SYS_FPGA_DATA 0x00020000 /* FPGA data pin (ppc output) */
292#define CONFIG_SYS_FPGA_INIT 0x00080000 /* FPGA init pin (ppc input) */
293#define CONFIG_SYS_FPGA_DONE 0x00100000 /* FPGA done pin (ppc input) */
stroesea20b27a2004-12-16 18:05:42 +0000294
295#endif /* _TASREG_H */