| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | * Analog Devices ADP1653 flash LED driver |
| 2 | |
| 3 | Required Properties: |
| 4 | |
| 5 | - compatible: Must contain "adi,adp1653" |
| 6 | |
| 7 | - reg: I2C slave address |
| 8 | |
| 9 | - enable-gpios: Specifier of the GPIO connected to EN pin |
| 10 | |
| 11 | There are two LED outputs available - flash and indicator. One LED is |
| 12 | represented by one child node, nodes need to be named "flash" and "indicator". |
| 13 | |
| 14 | Required properties of the LED child node: |
| 15 | - led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt |
| 16 | |
| 17 | Required properties of the flash LED child node: |
| 18 | |
| 19 | - flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt |
| 20 | - flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt |
| 21 | - led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt |
| 22 | |
| 23 | Example: |
| 24 | |
| 25 | adp1653: led-controller@30 { |
| 26 | compatible = "adi,adp1653"; |
| 27 | reg = <0x30>; |
| 28 | enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ |
| 29 | |
| 30 | flash { |
| 31 | flash-timeout-us = <500000>; |
| 32 | flash-max-microamp = <320000>; |
| 33 | led-max-microamp = <50000>; |
| 34 | }; |
| 35 | indicator { |
| 36 | led-max-microamp = <17500>; |
| 37 | }; |
| 38 | }; |