| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: Sony 1/3.06-Inch 13.13MP CMOS Digital Image Sensor |
| 8 | |
| 9 | maintainers: |
| 10 | - Ricardo Ribalda <ribalda@kernel.org> |
| 11 | |
| 12 | description: | |
| 13 | The Sony IMX214 is a 1/3.06-inch CMOS active pixel digital image sensor with |
| 14 | an active array size of 4224H x 3200V. It is programmable through an I2C |
| 15 | interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a |
| 16 | maximum throughput of 1.2Gbps/lane. |
| 17 | |
| 18 | allOf: |
| Tom Rini | 762f85b | 2024-07-20 11:15:10 -0600 | [diff] [blame] | 19 | - $ref: /schemas/media/video-interface-devices.yaml# |
| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 20 | |
| 21 | properties: |
| 22 | compatible: |
| 23 | const: sony,imx214 |
| 24 | |
| 25 | reg: |
| 26 | enum: |
| 27 | - 0x10 |
| 28 | - 0x1a |
| 29 | |
| 30 | clocks: |
| 31 | description: Reference to the xclk clock. |
| 32 | maxItems: 1 |
| 33 | |
| 34 | clock-frequency: |
| 35 | description: Frequency of the xclk clock in Hz. |
| 36 | |
| 37 | enable-gpios: |
| 38 | description: GPIO descriptor for the enable pin. |
| 39 | maxItems: 1 |
| 40 | |
| 41 | vdddo-supply: |
| 42 | description: Chip digital IO regulator (1.8V). |
| 43 | |
| 44 | vdda-supply: |
| 45 | description: Chip analog regulator (2.7V). |
| 46 | |
| 47 | vddd-supply: |
| 48 | description: Chip digital core regulator (1.12V). |
| 49 | |
| 50 | flash-leds: true |
| 51 | lens-focus: true |
| 52 | |
| 53 | port: |
| 54 | $ref: /schemas/graph.yaml#/$defs/port-base |
| 55 | description: | |
| 56 | Video output port. |
| 57 | |
| 58 | properties: |
| 59 | endpoint: |
| 60 | $ref: /schemas/media/video-interfaces.yaml# |
| 61 | unevaluatedProperties: false |
| 62 | |
| 63 | properties: |
| 64 | data-lanes: |
| 65 | anyOf: |
| 66 | - items: |
| 67 | - const: 1 |
| 68 | - const: 2 |
| 69 | - items: |
| 70 | - const: 1 |
| 71 | - const: 2 |
| 72 | - const: 3 |
| 73 | - const: 4 |
| 74 | |
| 75 | link-frequencies: true |
| 76 | |
| 77 | required: |
| 78 | - data-lanes |
| 79 | - link-frequencies |
| 80 | |
| 81 | additionalProperties: false |
| 82 | |
| 83 | required: |
| 84 | - compatible |
| 85 | - reg |
| 86 | - clocks |
| 87 | - clock-frequency |
| 88 | - enable-gpios |
| 89 | - vdddo-supply |
| 90 | - vdda-supply |
| 91 | - vddd-supply |
| 92 | - port |
| 93 | |
| 94 | unevaluatedProperties: false |
| 95 | |
| 96 | examples: |
| 97 | - | |
| 98 | #include <dt-bindings/gpio/gpio.h> |
| 99 | |
| 100 | i2c { |
| 101 | #address-cells = <1>; |
| 102 | #size-cells = <0>; |
| 103 | |
| 104 | camera-sensor@1a { |
| 105 | compatible = "sony,imx214"; |
| 106 | reg = <0x1a>; |
| 107 | vdddo-supply = <&pm8994_lvs1>; |
| 108 | vddd-supply = <&camera_vddd_1v12>; |
| 109 | vdda-supply = <&pm8994_l17>; |
| 110 | lens-focus = <&ad5820>; |
| 111 | enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; |
| 112 | clocks = <&camera_clk>; |
| 113 | clock-frequency = <24000000>; |
| 114 | |
| 115 | port { |
| 116 | imx214_ep: endpoint { |
| 117 | data-lanes = <1 2 3 4>; |
| 118 | link-frequencies = /bits/ 64 <480000000>; |
| 119 | remote-endpoint = <&csiphy0_ep>; |
| 120 | }; |
| 121 | }; |
| 122 | }; |
| 123 | }; |
| 124 | |
| 125 | ... |