Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 6b642aca7f571e777924f50732f530fd94b03bfb / . / src / arm / ti / omap / omap4-panda-common.dtsi
blob: 97706d6296a68f9943ecd769a4e55a2503e75ea2 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com/
4 */
5#include <dt-bindings/input/input.h>
6#include "elpida_ecb240abacn.dtsi"
7#include "omap4-mcpdm.dtsi"
8
9/ {
10 memory@80000000 {
11 device_type = "memory";
12 reg = <0x80000000 0x40000000>; /* 1 GB */
13 };
14
15 reserved-memory {
16 #address-cells = <1>;
17 #size-cells = <1>;
18 ranges;
19
20 dsp_memory_region: dsp-memory@98000000 {
21 compatible = "shared-dma-pool";
22 reg = <0x98000000 0x800000>;
23 reusable;
24 status = "okay";
25 };
26
27 ipu_memory_region: ipu-memory@98800000 {
28 compatible = "shared-dma-pool";
29 reg = <0x98800000 0x7000000>;
30 reusable;
31 status = "okay";
32 };
33 };
34
35 chosen {
36 stdout-path = &uart3;
37 };
38
39 aliases {
40 display0 = &dvi0;
41 display1 = &hdmi0;
42 ethernet = &ethernet;
43 };
44
45 leds: leds {
46 compatible = "gpio-leds";
47 pinctrl-names = "default";
48 pinctrl-0 = <
49 &led_wkgpio_pins
50 >;
51
52 led-heartbeat {
53 label = "pandaboard::status1";
54 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
55 linux,default-trigger = "heartbeat";
56 };
57
58 led-mmc {
59 label = "pandaboard::status2";
60 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
61 linux,default-trigger = "mmc0";
62 };
63 };
64
65 gpio_keys: gpio_keys {
66 compatible = "gpio-keys";
67 pinctrl-names = "default";
68 pinctrl-0 = <
69 &button_pins
70 >;
71
72 buttonS2 {
73 label = "button S2";
74 gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; /* gpio_121 */
75 linux,code = <BTN_0>;
76 wakeup-source;
77 };
78 };
79
80 sound: sound {
81 compatible = "ti,abe-twl6040";
82 ti,model = "PandaBoard";
83
84 ti,mclk-freq = <38400000>;
85
86 ti,mcpdm = <&mcpdm>;
87
88 ti,twl6040 = <&twl6040>;
89
90 /* Audio routing */
91 ti,audio-routing =
92 "Headset Stereophone", "HSOL",
93 "Headset Stereophone", "HSOR",
94 "Ext Spk", "HFL",
95 "Ext Spk", "HFR",
96 "Line Out", "AUXL",
97 "Line Out", "AUXR",
98 "HSMIC", "Headset Mic",
99 "Headset Mic", "Headset Mic Bias",
100 "AFML", "Line In",
101 "AFMR", "Line In";
102 };
103
104 /* HS USB Port 1 Power */
105 hsusb1_power: hsusb1_power_reg {
106 compatible = "regulator-fixed";
107 regulator-name = "hsusb1_vbus";
108 regulator-min-microvolt = <3300000>;
109 regulator-max-microvolt = <3300000>;
110 gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
111 startup-delay-us = <70000>;
112 enable-active-high;
113 /*
114 * boot-on is required along with always-on as the
115 * regulator framework doesn't enable the regulator
116 * if boot-on is not there.
117 */
118 regulator-always-on;
119 regulator-boot-on;
120 };
121
122 /* HS USB Host PHY on PORT 1 */
123 hsusb1_phy: hsusb1_phy {
124 compatible = "usb-nop-xceiv";
125 reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
126 #phy-cells = <0>;
127 vcc-supply = <&hsusb1_power>;
128 clocks = <&auxclk3_ck>;
129 clock-names = "main_clk";
130 clock-frequency = <19200000>;
131 };
132
133 /* regulator for wl12xx on sdio5 */
134 wl12xx_vmmc: wl12xx_vmmc {
135 pinctrl-names = "default";
136 pinctrl-0 = <&wl12xx_gpio>;
137 compatible = "regulator-fixed";
138 regulator-name = "vwl1271";
139 regulator-min-microvolt = <1800000>;
140 regulator-max-microvolt = <1800000>;
141 gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
142 startup-delay-us = <70000>;
143 enable-active-high;
144 };
145
146 tfp410: encoder0 {
147 compatible = "ti,tfp410";
148 powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
149
150 ports {
151 #address-cells = <1>;
152 #size-cells = <0>;
153
154 port@0 {
155 reg = <0>;
156
157 tfp410_in: endpoint {
158 remote-endpoint = <&dpi_out>;
159 };
160 };
161
162 port@1 {
163 reg = <1>;
164
165 tfp410_out: endpoint {
166 remote-endpoint = <&dvi_connector_in>;
167 };
168 };
169 };
170 };
171
172 dvi0: connector0 {
173 compatible = "dvi-connector";
174 label = "dvi";
175
176 digital;
177
178 ddc-i2c-bus = <&i2c3>;
179
180 port {
181 dvi_connector_in: endpoint {
182 remote-endpoint = <&tfp410_out>;
183 };
184 };
185 };
186
187 tpd12s015: encoder1 {
188 compatible = "ti,tpd12s015";
189
190 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
191 <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
192 <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
193
194 ports {
195 #address-cells = <1>;
196 #size-cells = <0>;
197
198 port@0 {
199 reg = <0>;
200
201 tpd12s015_in: endpoint {
202 remote-endpoint = <&hdmi_out>;
203 };
204 };
205
206 port@1 {
207 reg = <1>;
208
209 tpd12s015_out: endpoint {
210 remote-endpoint = <&hdmi_connector_in>;
211 };
212 };
213 };
214 };
215
216 hdmi0: connector1 {
217 compatible = "hdmi-connector";
218 label = "hdmi";
219
220 type = "a";
221
222 port {
223 hdmi_connector_in: endpoint {
224 remote-endpoint = <&tpd12s015_out>;
225 };
226 };
227 };
228};
229
230&omap4_pmx_core {
231 pinctrl-names = "default";
232 pinctrl-0 = <
233 &dss_dpi_pins
234 &tfp410_pins
235 &dss_hdmi_pins
236 &tpd12s015_pins
237 &hsusbb1_pins
238 >;
239
240 twl6040_pins: twl6040-pins {
241 pinctrl-single,pins = <
242 OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
243 OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
244 >;
245 };
246
247 mcbsp1_pins: mcbsp1-pins {
248 pinctrl-single,pins = <
249 OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
250 OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
251 OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
252 OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
253 >;
254 };
255
256 dss_dpi_pins: dss-dpi-pins {
257 pinctrl-single,pins = <
258 OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */
259 OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */
260 OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */
261 OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */
262 OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */
263 OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */
264 OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */
265 OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */
266 OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */
267 OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */
268 OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */
269
270 OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */
271 OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */
272 OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */
273 OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */
274 OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */
275 OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */
276 OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */
277 OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */
278 OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */
279 OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */
280 OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */
281 OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */
282 OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */
283 OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */
284
285 OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */
286 OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */
287 OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */
288 >;
289 };
290
291 tfp410_pins: tfp410-pins {
292 pinctrl-single,pins = <
293 OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3) /* gpio_0 */
294 >;
295 };
296
297 dss_hdmi_pins: dss-hdmi-pins {
298 pinctrl-single,pins = <
299 OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
300 OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
301 OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
302 >;
303 };
304
305 tpd12s015_pins: tpd12s015-pins {
306 pinctrl-single,pins = <
307 OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
308 OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
309 OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
310 >;
311 };
312
313 hsusbb1_pins: hsusbb1-pins {
314 pinctrl-single,pins = <
315 OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
316 OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
317 OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
318 OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
319 OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
320 OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
321 OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
322 OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
323 OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
324 OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
325 OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
326 OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
327 >;
328 };
329
330 i2c1_pins: i2c1-pins {
331 pinctrl-single,pins = <
332 OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
333 OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
334 >;
335 };
336
337 i2c2_pins: i2c2-pins {
338 pinctrl-single,pins = <
339 OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
340 OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
341 >;
342 };
343
344 i2c3_pins: i2c3-pins {
345 pinctrl-single,pins = <
346 OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
347 OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
348 >;
349 };
350
351 i2c4_pins: i2c4-pins {
352 pinctrl-single,pins = <
353 OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
354 OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
355 >;
356 };
357
358 /*
359 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
360 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
361 */
362 wl12xx_gpio: wl12xx-gpio-pins {
363 pinctrl-single,pins = <
364 OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */
365 OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3) /* gpmc_a22.gpio_46 */
366 OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48 */
367 OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_a25.gpio_49 */
368 >;
369 };
370
371 /* wl12xx GPIO inputs and SDIO pins */
372 wl12xx_pins: wl12xx-pins {
373 pinctrl-single,pins = <
374 OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
375 OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
376 OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
377 OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
378 OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
379 OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
380 OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
381 OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
382 >;
383 };
384
385 button_pins: button-pins {
386 pinctrl-single,pins = <
387 OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_121 */
388 >;
389 };
390};
391
392&omap4_pmx_wkup {
393 led_wkgpio_pins: leds-wkpins-pins {
394 pinctrl-single,pins = <
395 OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
396 OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
397 >;
398 };
399};
400
401&i2c1 {
402 pinctrl-names = "default";
403 pinctrl-0 = <&i2c1_pins>;
404
405 clock-frequency = <400000>;
406
407 twl: twl@48 {
408 reg = <0x48>;
409 /* IRQ# = 7 */
410 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]411 system-power-controller;
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]412 };
413
414 twl6040: twl@4b {
415 compatible = "ti,twl6040";
416 #clock-cells = <0>;
417 reg = <0x4b>;
418
419 pinctrl-names = "default";
420 pinctrl-0 = <&twl6040_pins>;
421
422 /* IRQ# = 119 */
423 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
424 ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
425
426 vio-supply = <&v1v8>;
427 v2v1-supply = <&v2v1>;
428 enable-active-high;
429 };
430};
431
432#include "twl6030.dtsi"
433#include "twl6030_omap4.dtsi"
434
435&i2c2 {
436 pinctrl-names = "default";
437 pinctrl-0 = <&i2c2_pins>;
438
439 clock-frequency = <400000>;
440};
441
442&i2c3 {
443 pinctrl-names = "default";
444 pinctrl-0 = <&i2c3_pins>;
445
446 clock-frequency = <100000>;
447
448 /*
449 * Display monitor features are burnt in their EEPROM as EDID data.
450 * The EEPROM is connected as I2C slave device.
451 */
452 eeprom@50 {
453 compatible = "ti,eeprom";
454 reg = <0x50>;
455 };
456};
457
458&i2c4 {
459 pinctrl-names = "default";
460 pinctrl-0 = <&i2c4_pins>;
461
462 clock-frequency = <400000>;
463};
464
465&mmc1 {
466 vmmc-supply = <&vmmc>;
467 bus-width = <8>;
468};
469
470&mmc2 {
471 status = "disabled";
472};
473
474&mmc3 {
475 status = "disabled";
476};
477
478&mmc4 {
479 status = "disabled";
480};
481
482&mmc5 {
483 pinctrl-names = "default";
484 pinctrl-0 = <&wl12xx_pins>;
485 vmmc-supply = <&wl12xx_vmmc>;
486 interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
487 &omap4_pmx_core 0x10e>;
488 non-removable;
489 bus-width = <4>;
490 cap-power-off-card;
491
492 #address-cells = <1>;
493 #size-cells = <0>;
494 wlcore: wlcore@2 {
495 compatible = "ti,wl1271";
496 reg = <2>;
497 /* gpio_53 with gpmc_ncs3 pad as wakeup */
498 interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
499 <&omap4_pmx_core 0x3a>;
500 interrupt-names = "irq", "wakeup";
501 ref-clock-frequency = <38400000>;
502 };
503};
504
505&emif1 {
506 cs1-used;
507 device-handle = <&elpida_ECB240ABACN>;
508};
509
510&emif2 {
511 cs1-used;
512 device-handle = <&elpida_ECB240ABACN>;
513};
514
515&mcbsp1 {
516 pinctrl-names = "default";
517 pinctrl-0 = <&mcbsp1_pins>;
518 status = "okay";
519};
520
521&twl_usb_comparator {
522 usb-supply = <&vusb>;
523};
524
525&uart2 {
526 interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
527 &omap4_pmx_core OMAP4_UART2_RX>;
528};
529
530&uart3 {
531 interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
532 &omap4_pmx_core OMAP4_UART3_RX>;
533};
534
535&uart4 {
536 interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
537 &omap4_pmx_core OMAP4_UART4_RX>;
538};
539
540&usb_otg_hs {
541 interface-type = <1>;
542 mode = <3>;
543 power = <50>;
544};
545
546&usbhshost {
547 port1-mode = "ehci-phy";
548};
549
550&usbhsehci {
551 phys = <&hsusb1_phy>;
552
553 #address-cells = <1>;
554 #size-cells = <0>;
555
556 hub@1 {
557 compatible = "usb424,9514";
558 reg = <1>;
559 #address-cells = <1>;
560 #size-cells = <0>;
561
562 ethernet: ethernet@1 {
563 compatible = "usb424,ec00";
564 reg = <1>;
565 };
566 };
567};
568
569&dss {
570 status = "okay";
571
572 port {
573 dpi_out: endpoint {
574 remote-endpoint = <&tfp410_in>;
575 data-lines = <24>;
576 };
577 };
578};
579
580&dsi2 {
581 status = "okay";
582 vdd-supply = <&vcxio>;
583};
584
585&hdmi {
586 status = "okay";
587 vdda-supply = <&vdac>;
588
589 port {
590 hdmi_out: endpoint {
591 remote-endpoint = <&tpd12s015_in>;
592 };
593 };
594};
595
596&dsp {
597 status = "okay";
598 memory-region = <&dsp_memory_region>;
599 ti,timers = <&timer5>;
600 ti,watchdog-timers = <&timer6>;
601};
602
603&ipu {
604 status = "okay";
605 memory-region = <&ipu_memory_region>;
606 ti,timers = <&timer3>;
607 ti,watchdog-timers = <&timer9>, <&timer11>;
608};