Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 6b642aca7f571e777924f50732f530fd94b03bfb / . / src / arm64 / ti / k3-j721s2-common-proc-board.dts
blob: c5a0b7cbb14f8866bbb06e337f1242455aeeea4e [file] [log] [blame]
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-only OR MIT
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]2/*
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]3 * Copyright (C) 2021-2024 Texas Instruments Incorporated - https://www.ti.com/
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]4 *
5 * Common Processor Board: https://www.ti.com/tool/J721EXCPXEVM
6 */
7
8/dts-v1/;
9
10#include "k3-j721s2-som-p0.dtsi"
11#include <dt-bindings/net/ti-dp83867.h>
12#include <dt-bindings/phy/phy-cadence.h>
13#include <dt-bindings/phy/phy.h>
14
15#include "k3-serdes.h"
16
17/ {
18 compatible = "ti,j721s2-evm", "ti,j721s2";
19 model = "Texas Instruments J721S2 EVM";
20
21 chosen {
22 stdout-path = "serial2:115200n8";
23 };
24
25 aliases {
26 serial1 = &mcu_uart0;
27 serial2 = &main_uart8;
28 mmc0 = &main_sdhci0;
29 mmc1 = &main_sdhci1;
30 can0 = &main_mcan16;
31 can1 = &mcu_mcan0;
32 can2 = &mcu_mcan1;
33 can3 = &main_mcan3;
34 can4 = &main_mcan5;
35 };
36
37 evm_12v0: fixedregulator-evm12v0 {
38 /* main supply */
39 compatible = "regulator-fixed";
40 regulator-name = "evm_12v0";
41 regulator-min-microvolt = <12000000>;
42 regulator-max-microvolt = <12000000>;
43 regulator-always-on;
44 regulator-boot-on;
45 };
46
47 vsys_3v3: fixedregulator-vsys3v3 {
48 /* Output of LM5140 */
49 compatible = "regulator-fixed";
50 regulator-name = "vsys_3v3";
51 regulator-min-microvolt = <3300000>;
52 regulator-max-microvolt = <3300000>;
53 vin-supply = <&evm_12v0>;
54 regulator-always-on;
55 regulator-boot-on;
56 };
57
58 vsys_5v0: fixedregulator-vsys5v0 {
59 /* Output of LM5140 */
60 compatible = "regulator-fixed";
61 regulator-name = "vsys_5v0";
62 regulator-min-microvolt = <5000000>;
63 regulator-max-microvolt = <5000000>;
64 vin-supply = <&evm_12v0>;
65 regulator-always-on;
66 regulator-boot-on;
67 };
68
69 vdd_mmc1: fixedregulator-sd {
70 /* Output of TPS22918 */
71 compatible = "regulator-fixed";
72 regulator-name = "vdd_mmc1";
73 regulator-min-microvolt = <3300000>;
74 regulator-max-microvolt = <3300000>;
75 regulator-boot-on;
76 enable-active-high;
77 vin-supply = <&vsys_3v3>;
78 gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
79 };
80
81 vdd_sd_dv: gpio-regulator-TLV71033 {
82 /* Output of TLV71033 */
83 compatible = "regulator-gpio";
84 regulator-name = "tlv71033";
85 pinctrl-names = "default";
86 pinctrl-0 = <&vdd_sd_dv_pins_default>;
87 regulator-min-microvolt = <1800000>;
88 regulator-max-microvolt = <3300000>;
89 regulator-boot-on;
90 vin-supply = <&vsys_5v0>;
91 gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
92 states = <1800000 0x0>,
93 <3300000 0x1>;
94 };
95
96 transceiver1: can-phy1 {
97 compatible = "ti,tcan1043";
98 #phy-cells = <0>;
99 max-bitrate = <5000000>;
100 pinctrl-names = "default";
101 pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
102 standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_LOW>;
103 enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
104 };
105
106 transceiver2: can-phy2 {
107 compatible = "ti,tcan1042";
108 #phy-cells = <0>;
109 max-bitrate = <5000000>;
110 pinctrl-names = "default";
111 pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
112 standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
113 };
114
115 transceiver3: can-phy3 {
116 compatible = "ti,tcan1043";
117 #phy-cells = <0>;
118 max-bitrate = <5000000>;
119 standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
120 enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
121 mux-states = <&mux0 1>;
122 };
123
124 transceiver4: can-phy4 {
125 compatible = "ti,tcan1042";
126 #phy-cells = <0>;
127 max-bitrate = <5000000>;
128 standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
129 mux-states = <&mux1 1>;
130 };
131};
132
133&main_pmx0 {
134 main_uart8_pins_default: main-uart8-default-pins {
135 pinctrl-single,pins = <
136 J721S2_IOPAD(0x040, PIN_INPUT, 14) /* (AC28) MCASP0_AXR0.UART8_CTSn */
137 J721S2_IOPAD(0x044, PIN_OUTPUT, 14) /* (Y26) MCASP0_AXR1.UART8_RTSn */
138 J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
139 J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
140 >;
141 };
142
143 main_i2c3_pins_default: main-i2c3-default-pins {
144 pinctrl-single,pins = <
145 J721S2_IOPAD(0x064, PIN_INPUT_PULLUP, 13) /* (W28) MCAN0_TX.I2C3_SCL */
146 J721S2_IOPAD(0x060, PIN_INPUT_PULLUP, 13) /* (AC27) MCASP2_AXR1.I2C3_SDA */
147 >;
148 };
149
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]150 main_i2c5_pins_default: main-i2c5-default-pins {
151 pinctrl-single,pins = <
152 J721S2_IOPAD(0x01c, PIN_INPUT, 8) /* (Y24) MCAN15_TX.I2C5_SCL */
153 J721S2_IOPAD(0x018, PIN_INPUT, 8) /* (W23) MCAN14_RX.I2C5_SDA */
154 >;
155 };
156
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]157 main_mmc1_pins_default: main-mmc1-default-pins {
158 pinctrl-single,pins = <
159 J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
160 J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
161 J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
162 J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
163 J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
164 J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
165 J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
166 J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
167 >;
168 };
169
170 vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
171 pinctrl-single,pins = <
172 J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */
173 >;
174 };
175
176 main_usbss0_pins_default: main-usbss0-default-pins {
177 pinctrl-single,pins = <
178 J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */
179 >;
180 };
181
182 main_mcan3_pins_default: main-mcan3-default-pins {
183 pinctrl-single,pins = <
184 J721S2_IOPAD(0x080, PIN_INPUT, 0) /* (U26) MCASP0_AXR4.MCAN3_RX */
185 J721S2_IOPAD(0x07c, PIN_OUTPUT, 0) /* (T27) MCASP0_AXR3.MCAN3_TX */
186 >;
187 };
188
189 main_mcan5_pins_default: main-mcan5-default-pins {
190 pinctrl-single,pins = <
191 J721S2_IOPAD(0x03c, PIN_INPUT, 0) /* (U27) MCASP0_AFSX.MCAN5_RX */
192 J721S2_IOPAD(0x038, PIN_OUTPUT, 0) /* (AB28) MCASP0_ACLKX.MCAN5_TX */
193 >;
194 };
195};
196
197&wkup_pmx2 {
198 wkup_uart0_pins_default: wkup-uart0-default-pins {
199 pinctrl-single,pins = <
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]200 J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
201 J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
202 >;
203 };
204
205 mcu_uart0_pins_default: mcu-uart0-default-pins {
206 pinctrl-single,pins = <
207 J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */
208 J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */
209 J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */
210 J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
211 >;
212 };
213
214 mcu_cpsw_pins_default: mcu-cpsw-default-pins {
215 pinctrl-single,pins = <
216 J721S2_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */
217 J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */
218 J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */
219 J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */
220 J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */
221 J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */
222 J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */
223 J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */
224 J721S2_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */
225 J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
226 J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
227 J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
228 >;
229 };
230
231 mcu_mdio_pins_default: mcu-mdio-default-pins {
232 pinctrl-single,pins = <
233 J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
234 J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
235 >;
236 };
237
238 mcu_mcan0_pins_default: mcu-mcan0-default-pins {
239 pinctrl-single,pins = <
240 J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */
241 J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */
242 >;
243 };
244
245 mcu_mcan1_pins_default: mcu-mcan1-default-pins {
246 pinctrl-single,pins = <
247 J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */
248 J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /*(C23) WKUP_GPIO0_4.MCU_MCAN1_TX */
249 >;
250 };
251
252 mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
253 pinctrl-single,pins = <
254 J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (D26) WKUP_GPIO0_0 */
255 J721S2_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (B25) MCU_SPI0_D1.WKUP_GPIO0_69 */
256 >;
257 };
258
259 mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
260 pinctrl-single,pins = <
261 J721S2_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */
262 >;
263 };
264
265 mcu_adc0_pins_default: mcu-adc0-default-pins {
266 pinctrl-single,pins = <
267 J721S2_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (L25) MCU_ADC0_AIN0 */
268 J721S2_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN1 */
269 J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (M24) MCU_ADC0_AIN2 */
270 J721S2_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (L24) MCU_ADC0_AIN3 */
271 J721S2_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (L27) MCU_ADC0_AIN4 */
272 J721S2_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN5 */
273 J721S2_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (M27) MCU_ADC0_AIN6 */
274 J721S2_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (M26) MCU_ADC0_AIN7 */
275 >;
276 };
277
278 mcu_adc1_pins_default: mcu-adc1-default-pins {
279 pinctrl-single,pins = <
280 J721S2_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (P25) MCU_ADC1_AIN0 */
281 J721S2_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (R25) MCU_ADC1_AIN1 */
282 J721S2_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (P28) MCU_ADC1_AIN2 */
283 J721S2_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (P27) MCU_ADC1_AIN3 */
284 J721S2_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (N25) MCU_ADC1_AIN4 */
285 J721S2_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (P26) MCU_ADC1_AIN5 */
286 J721S2_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */
287 J721S2_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */
288 >;
289 };
290};
291
292&wkup_pmx1 {
293 mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
294 pinctrl-single,pins = <
295 J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
296 J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
297 J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
298 J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
299 J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
300 J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
301 J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
302 J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
303 >;
304 };
305};
306
307&main_gpio0 {
308 status = "okay";
309};
310
311&wkup_gpio0 {
312 status = "okay";
313};
314
315&wkup_uart0 {
316 status = "reserved";
317 pinctrl-names = "default";
318 pinctrl-0 = <&wkup_uart0_pins_default>;
319};
320
321&mcu_uart0 {
322 status = "okay";
323 pinctrl-names = "default";
324 pinctrl-0 = <&mcu_uart0_pins_default>;
325};
326
327&main_uart8 {
328 status = "okay";
329 pinctrl-names = "default";
330 pinctrl-0 = <&main_uart8_pins_default>;
331 /* Shared with TFA on this platform */
332 power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
333};
334
335&main_i2c0 {
336 clock-frequency = <400000>;
337
338 exp1: gpio@20 {
339 compatible = "ti,tca6416";
340 reg = <0x20>;
341 gpio-controller;
342 #gpio-cells = <2>;
343 gpio-line-names = "PCIE_2L_MODE_SEL", "PCIE_2L_PERSTZ", "PCIE_2L_RC_RSTZ",
344 "PCIE_2L_EP_RST_EN", "PCIE_1L_MODE_SEL", "PCIE_1L_PERSTZ",
345 "PCIE_1L_RC_RSTZ", "PCIE_1L_EP_RST_EN", "PCIE_2L_PRSNT#",
346 "PCIE_1L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3", "EXP_MUX1",
347 "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTz";
348 };
349
350 exp2: gpio@22 {
351 compatible = "ti,tca6424";
352 reg = <0x22>;
353 gpio-controller;
354 #gpio-cells = <2>;
355 gpio-line-names = "APPLE_AUTH_RSTZ", "MLB_RSTZ", "GPIO_USD_PWR_EN", "USBC_PWR_EN",
356 "USBC_MODE_SEL1", "USBC_MODE_SEL0", "MCAN0_EN", "MCAN0_STB#",
357 "MUX_SPAREMUX_SPARE", "MCASP/TRACE_MUX_S0", "MCASP/TRACE_MUX_S1",
358 "MLB_MUX_SEL", "MCAN_MUX_SEL", "MCASP2/SPI3_MUX_SEL", "PCIe_CLKREQn_MUX_SEL",
359 "CDCI2_RSTZ", "ENET_EXP_PWRDN", "ENET_EXP_RESETZ", "ENET_I2CMUX_SEL",
360 "ENET_EXP_SPARE2", "M2PCIE_RTSZ", "USER_INPUT1", "USER_LED1", "USER_LED2";
361 };
362};
363
Tom Rini6bb92fc2024-05-20 09:54:58 -0600[diff] [blame]364&main_i2c5 {
365 pinctrl-names = "default";
366 pinctrl-0 = <&main_i2c5_pins_default>;
367 clock-frequency = <400000>;
368 status = "okay";
369
370 exp5: gpio@20 {
371 compatible = "ti,tca6408";
372 reg = <0x20>;
373 gpio-controller;
374 #gpio-cells = <2>;
375 gpio-line-names = "CSI2_EXP_RSTZ", "CSI2_EXP_A_GPIO0",
376 "CSI2_EXP_A_GPIO1", "CSI2_EXP_A_GPIO2",
377 "CSI2_EXP_B_GPIO1", "CSI2_EXP_B_GPIO2",
378 "CSI2_EXP_B_GPIO3", "CSI2_EXP_B_GPIO4";
379 };
380};
381
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]382&main_sdhci0 {
383 /* eMMC */
384 status = "okay";
385 non-removable;
386 ti,driver-strength-ohm = <50>;
387 disable-wp;
388};
389
390&main_sdhci1 {
391 /* SD card */
392 status = "okay";
393 pinctrl-0 = <&main_mmc1_pins_default>;
394 pinctrl-names = "default";
395 disable-wp;
396 vmmc-supply = <&vdd_mmc1>;
397 vqmmc-supply = <&vdd_sd_dv>;
398};
399
400&mcu_cpsw {
401 pinctrl-names = "default";
402 pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
403};
404
405&davinci_mdio {
406 phy0: ethernet-phy@0 {
407 reg = <0>;
408 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
409 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
410 ti,min-output-impedance;
411 };
412};
413
414&cpsw_port1 {
415 phy-mode = "rgmii-rxid";
416 phy-handle = <&phy0>;
417};
418
419&serdes_ln_ctrl {
420 idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>,
421 <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>;
422};
423
424&serdes_refclk {
425 clock-frequency = <100000000>;
426};
427
428&serdes0 {
429 status = "okay";
430 serdes0_pcie_link: phy@0 {
431 reg = <0>;
432 cdns,num-lanes = <1>;
433 #phy-cells = <0>;
434 cdns,phy-type = <PHY_TYPE_PCIE>;
435 resets = <&serdes_wiz0 1>;
436 };
437};
438
439&usb_serdes_mux {
440 idle-states = <1>; /* USB0 to SERDES lane 1 */
441};
442
443&usbss0 {
444 status = "okay";
445 pinctrl-0 = <&main_usbss0_pins_default>;
446 pinctrl-names = "default";
447 ti,vbus-divider;
448 ti,usb2-only;
449};
450
451&usb0 {
452 dr_mode = "otg";
453 maximum-speed = "high-speed";
454};
455
456&ospi1 {
457 status = "okay";
458 pinctrl-names = "default";
459 pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
460
461 flash@0 {
462 compatible = "jedec,spi-nor";
463 reg = <0x0>;
464 spi-tx-bus-width = <1>;
465 spi-rx-bus-width = <4>;
466 spi-max-frequency = <40000000>;
467 cdns,tshsl-ns = <60>;
468 cdns,tsd2d-ns = <60>;
469 cdns,tchsh-ns = <60>;
470 cdns,tslch-ns = <60>;
471 cdns,read-delay = <2>;
472 };
473};
474
475&pcie1_rc {
476 status = "okay";
477 reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
478 phys = <&serdes0_pcie_link>;
479 phy-names = "pcie-phy";
480 num-lanes = <1>;
481};
482
483&mcu_mcan0 {
484 status = "okay";
485 pinctrl-names = "default";
486 pinctrl-0 = <&mcu_mcan0_pins_default>;
487 phys = <&transceiver1>;
488};
489
490&mcu_mcan1 {
491 status = "okay";
492 pinctrl-names = "default";
493 pinctrl-0 = <&mcu_mcan1_pins_default>;
494 phys = <&transceiver2>;
495};
496
497&tscadc0 {
498 pinctrl-0 = <&mcu_adc0_pins_default>;
499 pinctrl-names = "default";
500 status = "okay";
501 adc {
502 ti,adc-channels = <0 1 2 3 4 5 6 7>;
503 };
504};
505
506&tscadc1 {
507 pinctrl-0 = <&mcu_adc1_pins_default>;
508 pinctrl-names = "default";
509 status = "okay";
510 adc {
511 ti,adc-channels = <0 1 2 3 4 5 6 7>;
512 };
513};
514
515&main_mcan3 {
516 status = "okay";
517 pinctrl-names = "default";
518 pinctrl-0 = <&main_mcan3_pins_default>;
519 phys = <&transceiver3>;
520};
521
522&main_mcan5 {
523 status = "okay";
524 pinctrl-names = "default";
525 pinctrl-0 = <&main_mcan5_pins_default>;
526 phys = <&transceiver4>;
527};