blob: f1301f6661a182306cadf85e8b1b61da677e7f65 [file] [log] [blame]
Siva Durga Prasad Paladugu0b54a9d2015-06-10 15:50:57 +05301if ARCH_ZYNQMP
2
Tien Fong Chee0c3a9ed2019-01-23 14:20:03 +08003config SPL_FS_FAT
Simon Glassae56db52016-09-12 23:18:38 -06004 default y
5
Simon Glass77d2f7f2016-09-12 23:18:41 -06006config SPL_LIBCOMMON_SUPPORT
7 default y
8
Simon Glass1646eba2016-09-12 23:18:42 -06009config SPL_LIBDISK_SUPPORT
10 default y
11
Simon Glasscc4288e2016-09-12 23:18:43 -060012config SPL_LIBGENERIC_SUPPORT
13 default y
14
Simon Glass1fdf7c62016-09-12 23:18:44 -060015config SPL_MMC_SUPPORT
Alexandru Gagniuc0dcf18c2017-04-04 10:02:58 -070016 default y if MMC_SDHCI_ZYNQ
Simon Glass1fdf7c62016-09-12 23:18:44 -060017
Simon Glasse00f76c2016-09-12 23:18:56 -060018config SPL_SERIAL_SUPPORT
19 default y
20
Simon Glasse404ade2016-09-12 23:18:57 -060021config SPL_SPI_FLASH_SUPPORT
22 default y if ZYNQ_QSPI
23
Simon Glassf35ed9e2016-09-12 23:18:58 -060024config SPL_SPI_SUPPORT
25 default y if ZYNQ_QSPI
26
Michal Simek84c72042015-01-15 10:01:51 +010027config SYS_BOARD
28 default "zynqmp"
29
30config SYS_VENDOR
Mike Looijmansef4cab92017-01-03 09:47:52 +010031 string "Vendor name"
Michal Simek84c72042015-01-15 10:01:51 +010032 default "xilinx"
33
34config SYS_SOC
35 default "zynqmp"
36
37config SYS_CONFIG_NAME
Michal Simeka1108da2016-03-18 18:21:36 +010038 string "Board configuration name"
39 default "xilinx_zynqmp"
40 help
41 This option contains information about board configuration name.
42 Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
43 will be used for board configuration.
Michal Simek84c72042015-01-15 10:01:51 +010044
Siva Durga Prasad Paladugue042d362017-07-13 19:01:11 +053045config SYS_MEM_RSVD_FOR_MMU
46 bool "Reserve memory for MMU Table"
47 help
48 If defined this option is used to setup different space for
49 MMU table than the one which will be allocated during
50 relocation.
51
Mike Looijmans3b646082016-09-20 11:37:24 +020052config BOOT_INIT_FILE
53 string "boot.bin init register filename"
Michal Simek9cf9da72016-12-16 13:00:26 +010054 depends on SPL
Mike Looijmans3b646082016-09-20 11:37:24 +020055 default ""
56 help
57 Add register writes to boot.bin format (max 256 pairs).
58 Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
59
Michal Simekc85a6b72016-10-21 12:58:17 +020060config PMUFW_INIT_FILE
61 string "PMU firmware"
62 depends on SPL
63 default ""
64 help
65 Include external PMUFW (Platform Management Unit FirmWare) to
66 a Xilinx bootable image (boot.bin).
67
Luca Ceresolic28a9cf2019-05-21 18:06:43 +020068config ZYNQMP_SPL_PM_CFG_OBJ_FILE
69 string "PMU firmware configuration object to load at runtime by SPL"
70 depends on SPL
71 help
72 Path to a binary PMU firmware configuration object to be linked
73 into U-Boot SPL and loaded at runtime into the PMU firmware.
74
75 The ZynqMP Power Management Unit (PMU) needs a configuration
76 object for most SoC peripherals to work. To have it loaded by
77 U-Boot SPL set here the file name (absolute path or relative to
78 the top source tree) of your configuration, which must be a
79 binary blob. It will be linked in the SPL binary and loaded
80 into the PMU firmware by U-Boot SPL during board
81 initialization.
82
83 Leave this option empty if your PMU firmware has a hard-coded
84 configuration object or you are loading it by any other means.
85
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053086config ZYNQMP_USB
87 bool "Configure ZynqMP USB"
88
Siva Durga Prasad Paladugu3b644a32018-01-12 15:35:46 +053089config ZYNQMP_NO_DDR
90 bool "Disable DDR MMU mapping"
91 help
92 This option configures MMU with no DDR to avoid speculative
93 access to DDR memory where DDR is not present.
94
Simon Glass04e38902016-07-05 17:10:13 -060095config SYS_MALLOC_F_LEN
96 default 0x600
97
Siva Durga Prasad Paladugu189bec42017-07-13 19:01:10 +053098config DEFINE_TCM_OCM_MMAP
99 bool "Define TCM and OCM memory in MMU Table"
Siva Durga Prasad Paladugu89401482017-08-01 16:24:50 +0530100 default y if MP
Siva Durga Prasad Paladugu189bec42017-07-13 19:01:10 +0530101 help
102 This option if enabled defines the TCM and OCM memory and its
103 memory attributes in MMU table entry.
104
Michal Simekfd1b6352017-07-12 13:21:27 +0200105config ZYNQMP_PSU_INIT_ENABLED
106 bool "Include psu_init"
107 help
108 Include psu_init to full u-boot. SPL include psu_init by default.
109
Michal Simek7f491d72016-08-30 16:17:27 +0200110config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
111 bool "Overwrite SPL bootmode"
112 depends on SPL
113 help
114 Overwrite bootmode selected via boot mode pins to tell SPL what should
115 be the next boot device.
116
Vipul Kumar5dc5a532018-02-28 15:53:28 +0530117config ZYNQ_SDHCI_MAX_FREQ
118 default 200000000
119
Michal Simek7f491d72016-08-30 16:17:27 +0200120config SPL_ZYNQMP_ALT_BOOTMODE
121 hex
122 default 0x0 if JTAG_MODE
123 default 0x1 if QSPI_MODE_24BIT
124 default 0x2 if QSPI_MODE_32BIT
125 default 0x3 if SD_MODE
126 default 0x4 if NAND_MODE
127 default 0x5 if SD_MODE1
128 default 0x6 if EMMC_MODE
129 default 0x7 if USB_MODE
Michal Simek26610812016-10-26 09:24:32 +0200130 default 0xa if SW_USBHOST_MODE
131 default 0xb if SW_SATA_MODE
Michal Simek011f0c42017-02-15 09:41:53 +0100132 default 0xe if SD1_LSHFT_MODE
Michal Simek7f491d72016-08-30 16:17:27 +0200133
134choice
135 prompt "Boot mode"
Michal Simeke3672402016-08-30 16:17:27 +0200136 depends on SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
Ulf Magnussone7563c22018-01-30 14:02:01 +0100137 default JTAG_MODE
Michal Simek7f491d72016-08-30 16:17:27 +0200138
139config JTAG_MODE
140 bool "JTAG_MODE"
141
142config QSPI_MODE_24BIT
143 bool "QSPI_MODE_24BIT"
144
145config QSPI_MODE_32BIT
146 bool "QSPI_MODE_32BIT"
147
148config SD_MODE
149 bool "SD_MODE"
150
151config SD_MODE1
152 bool "SD_MODE1"
153
154config NAND_MODE
155 bool "NAND_MODE"
156
157config EMMC_MODE
158 bool "EMMC_MODE"
159
160config USB_MODE
161 bool "USB"
162
Michal Simek26610812016-10-26 09:24:32 +0200163config SW_USBHOST_MODE
164 bool "SW USBHOST_MODE"
165
166config SW_SATA_MODE
167 bool "SW SATA_MODE"
168
Michal Simek011f0c42017-02-15 09:41:53 +0100169config SD1_LSHFT_MODE
170 bool "SD1_LSHFT_MODE"
171
Michal Simek7f491d72016-08-30 16:17:27 +0200172endchoice
Simon Glass04e38902016-07-05 17:10:13 -0600173
Michal Simek6ba36c02020-08-27 15:34:11 +0200174source "board/xilinx/Kconfig"
175source "board/xilinx/zynqmp/Kconfig"
176
Michal Simek84c72042015-01-15 10:01:51 +0100177endif