Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Peter Tyser | 1f03cbf | 2008-12-23 16:32:00 -0600 | [diff] [blame] | 2 | /* |
| 3 | * Copyright 2008 Extreme Engineering Solutions, Inc. |
| 4 | * Copyright 2008 Freescale Semiconductor, Inc. |
| 5 | * |
| 6 | * (C) Copyright 2000 |
| 7 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
Peter Tyser | 1f03cbf | 2008-12-23 16:32:00 -0600 | [diff] [blame] | 8 | */ |
| 9 | |
| 10 | #include <common.h> |
| 11 | #include <asm/mmu.h> |
| 12 | |
| 13 | struct fsl_e_tlb_entry tlb_table[] = { |
| 14 | /* TLB 0 - for temp stack in cache */ |
| 15 | SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, |
| 16 | MAS3_SX|MAS3_SW|MAS3_SR, 0, |
| 17 | 0, 0, BOOKE_PAGESZ_4K, 0), |
| 18 | SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, |
| 19 | CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, |
| 20 | MAS3_SX|MAS3_SW|MAS3_SR, 0, |
| 21 | 0, 0, BOOKE_PAGESZ_4K, 0), |
| 22 | SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, |
| 23 | CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, |
| 24 | MAS3_SX|MAS3_SW|MAS3_SR, 0, |
| 25 | 0, 0, BOOKE_PAGESZ_4K, 0), |
| 26 | SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, |
| 27 | CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, |
| 28 | MAS3_SX|MAS3_SW|MAS3_SR, 0, |
| 29 | 0, 0, BOOKE_PAGESZ_4K, 0), |
| 30 | |
| 31 | /* W**G* - NOR flashes */ |
| 32 | /* This will be changed to *I*G* after relocation to RAM. */ |
| 33 | SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2, |
| 34 | MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, |
| 35 | 0, 0, BOOKE_PAGESZ_256M, 1), |
| 36 | |
| 37 | SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, |
| 38 | MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, |
| 39 | 0, 1, BOOKE_PAGESZ_1M, 1), |
| 40 | |
| 41 | /* *I*G* - NAND flash */ |
| 42 | SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE, |
| 43 | MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, |
| 44 | 0, 2, BOOKE_PAGESZ_1M, 1), |
| 45 | |
| 46 | #if CONFIG_PCI1 |
| 47 | /* *I*G* - PCI MEM */ |
| 48 | SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, |
| 49 | MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, |
| 50 | 0, 3, BOOKE_PAGESZ_1G, 1), |
| 51 | #endif |
| 52 | |
| 53 | #if CONFIG_PCI2 |
| 54 | /* *I*G* - PCI MEM */ |
| 55 | SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS, |
| 56 | MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, |
| 57 | 0, 4, BOOKE_PAGESZ_256M, 1), |
| 58 | #endif |
| 59 | |
| 60 | #if defined(CONFIG_PCI1) || defined(CONFIG_PCI2) |
| 61 | /* *I*G* - PCI IO */ |
| 62 | SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_PHYS, |
| 63 | MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, |
| 64 | 0, 5, BOOKE_PAGESZ_16M, 1), |
| 65 | #endif |
| 66 | }; |
| 67 | |
| 68 | int num_tlb_entries = ARRAY_SIZE(tlb_table); |