blob: 2c0774fea03ee6606834f161dbf252161a9a2e77 [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
2 * (C) Copyright 2002
3 * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/* ------------------------------------------------------------------------- */
25
26/*
27 * board/config.h - configuration options, board specific
28 */
29
30#ifndef __CONFIG_H
31#define __CONFIG_H
32
33/*
34 * High Level Configuration Options
35 * (easy to change)
36 */
37
38#define CONFIG_MPC824X 1
39#define CONFIG_MPC8240 1
40#define CONFIG_PN62 1
41
42#define CONFIG_CONS_INDEX 1
43
44
Jon Loeligeracf02692007-07-08 14:49:44 -050045/*
Jon Loeligera1aa0bb2007-07-10 09:22:23 -050046 * BOOTP options
47 */
48#define CONFIG_BOOTP_BOOTFILESIZE
49#define CONFIG_BOOTP_BOOTPATH
50#define CONFIG_BOOTP_GATEWAY
51#define CONFIG_BOOTP_HOSTNAME
52
53
54/*
Jon Loeligeracf02692007-07-08 14:49:44 -050055 * Command line configuration.
56 */
57#include <config_cmd_default.h>
wdenkc6097192002-11-03 00:24:07 +000058
Jon Loeligeracf02692007-07-08 14:49:44 -050059#define CONFIG_CMD_PCI
60#define CONFIG_CMD_BSP
61
62#undef CONFIG_CMD_AUTOSCRIPT
63#undef CONFIG_CMD_LOADS
64#undef CONFIG_CMD_ENV
65#undef CONFIG_CMD_FLASH
66#undef CONFIG_CMD_IMLS
67
wdenkc6097192002-11-03 00:24:07 +000068
69#define CONFIG_BAUDRATE 19200 /* console baudrate */
70
71#define CONFIG_BOOTDELAY 1 /* autoboot after n seconds */
72
73#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
74
75#define CONFIG_SERVERIP 10.0.0.201
Wolfgang Denk53677ef2008-05-20 16:00:29 +020076#define CONFIG_IPADDR 10.0.0.200
wdenkc6097192002-11-03 00:24:07 +000077#define CONFIG_ROOTPATH /opt/eldk/ppc_82xx
78#define CONFIG_NETMASK 255.255.255.0
79#undef CONFIG_BOOTARGS
80#if 0
81/* Boot Linux with NFS root filesystem */
82#define CONFIG_BOOTCOMMAND \
83 "setenv verify y;" \
Wolfgang Denk53677ef2008-05-20 16:00:29 +020084 "setenv bootargs console=ttyS0,19200 mem=31M quiet " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010085 "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
86 "ip=${ipaddr}:${serverip}::${netmask}:pn62:eth0:off;" \
wdenkc6097192002-11-03 00:24:07 +000087 "loadp 100000; bootm"
wdenk3bac3512003-03-12 10:41:04 +000088 /* "tftpboot 100000 uImage; bootm" */
wdenkc6097192002-11-03 00:24:07 +000089#else
90/* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */
91#define CONFIG_BOOTCOMMAND \
92 "setenv verify n;" \
Wolfgang Denk53677ef2008-05-20 16:00:29 +020093 "setenv bootargs console=ttyS0,19200 mem=31M quiet " \
wdenkc6097192002-11-03 00:24:07 +000094 "root=/dev/ram rw " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010095 "ip=${ipaddr}:${serverip}::${netmask}:pn62:eth0:off;" \
wdenkc6097192002-11-03 00:24:07 +000096 "loadp 200000; bootm"
97#endif
98
wdenkc6097192002-11-03 00:24:07 +000099/*
100 * Miscellaneous configurable options
101 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200102#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
103#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
104#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
105#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
106#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
107#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
108#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
109#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenkc6097192002-11-03 00:24:07 +0000110
111#define CONFIG_PRAM 1024 /* reserve 1 MB protected RAM */
112
113#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */
114
wdenke2ffd592004-12-31 09:32:47 +0000115#define CONFIG_HAS_ETH1 1 /* add support for eth1addr */
116
wdenkc6097192002-11-03 00:24:07 +0000117#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */
118
119/*
120 * PCI stuff
121 */
122#define CONFIG_PCI /* include pci support */
123#define CONFIG_PCI_PNP /* we need Plug 'n Play */
124#if 0
125#define CONFIG_PCI_SCAN_SHOW /* show PCI auto-scan at boot */
126#endif
127
128/*
129 * Networking stuff
130 */
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200131#define CONFIG_NET_MULTI /* Multi ethernet cards support */
wdenkc6097192002-11-03 00:24:07 +0000132
133#define CONFIG_PCNET /* there are 2 AMD PCnet 79C973 */
134#define CONFIG_PCNET_79C973
135
136#define _IO_BASE 0xfe000000 /* points to PCI I/O space */
137
138
139/*
140 * Start addresses for the final memory configuration
141 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200142 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenkc6097192002-11-03 00:24:07 +0000143 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200144#define CONFIG_SYS_SDRAM_BASE 0x00000000
145#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000
wdenkc6097192002-11-03 00:24:07 +0000146
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200147#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
wdenkc6097192002-11-03 00:24:07 +0000148
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200149#undef CONFIG_SYS_RAMBOOT
150#define CONFIG_SYS_MONITOR_LEN 0x00030000
151#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
wdenkc6097192002-11-03 00:24:07 +0000152
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200153/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/
154#define CONFIG_SYS_GBL_DATA_SIZE 128
wdenkc6097192002-11-03 00:24:07 +0000155
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200156#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
157#define CONFIG_SYS_INIT_RAM_END 0x1000
158#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
wdenkc6097192002-11-03 00:24:07 +0000159
160
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200161#define CONFIG_SYS_NO_FLASH 1 /* There is no FLASH memory */
wdenkc6097192002-11-03 00:24:07 +0000162
Jean-Christophe PLAGNIOL-VILLARD93f6d722008-09-10 22:48:00 +0200163#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200164#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */
165#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
wdenkc6097192002-11-03 00:24:07 +0000166
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200167#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
wdenkc6097192002-11-03 00:24:07 +0000168
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200169#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
170#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 0 ... 32 MB in DRAM */
wdenkc6097192002-11-03 00:24:07 +0000171
172/*
173 * Serial port configuration
174 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200175#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
wdenkc6097192002-11-03 00:24:07 +0000176
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177#define CONFIG_SYS_NS16550
178#define CONFIG_SYS_NS16550_SERIAL
wdenkc6097192002-11-03 00:24:07 +0000179
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200180#define CONFIG_SYS_NS16550_REG_SIZE 1
wdenkc6097192002-11-03 00:24:07 +0000181
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200182#define CONFIG_SYS_NS16550_CLK 1843200
wdenkc6097192002-11-03 00:24:07 +0000183
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200184#define CONFIG_SYS_NS16550_COM1 0xff800008
185#define CONFIG_SYS_NS16550_COM2 0xff800000
wdenkc6097192002-11-03 00:24:07 +0000186
187/*
188 * Low Level Configuration Settings
189 * (address mappings, register initial values, etc.)
190 * You should know what you are doing if you make changes here.
191 */
192
193#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
194#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
195
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200196#define CONFIG_SYS_EUMB_ADDR 0xFCE00000
wdenkc6097192002-11-03 00:24:07 +0000197
198/* MCCR1 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200199#define CONFIG_SYS_ROMNAL 3 /* rom/flash next access time */
200#define CONFIG_SYS_ROMFAL 7 /* rom/flash access time */
wdenkc6097192002-11-03 00:24:07 +0000201
202/* MCCR2 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200203#define CONFIG_SYS_ASRISE 6 /* ASRISE in clocks */
204#define CONFIG_SYS_ASFALL 12 /* ASFALL in clocks */
205#define CONFIG_SYS_REFINT 5600 /* REFINT in clocks */
wdenkc6097192002-11-03 00:24:07 +0000206
207/* MCCR3 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200208#define CONFIG_SYS_BSTOPRE 0x3cf /* Burst To Precharge */
209#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */
210#define CONFIG_SYS_RDLAT 3 /* data latency from read command */
wdenkc6097192002-11-03 00:24:07 +0000211
212/* MCCR4 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200213#define CONFIG_SYS_PRETOACT 1 /* Precharge to activate interval */
214#define CONFIG_SYS_ACTTOPRE 3 /* Activate to Precharge interval */
215#define CONFIG_SYS_ACTORW 2 /* Activate to R/W */
216#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */
217#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE Wrap type */
218#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */
219#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
wdenkc6097192002-11-03 00:24:07 +0000220
221/* Memory bank settings:
222 *
223 * only bits 20-29 are actually used from these vales to set the
224 * start/qend address the upper two bits will be 0, and the lower 20
225 * bits will be set to 0x00000 for a start address, or 0xfffff for an
226 * end address
227 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200228#define CONFIG_SYS_BANK0_START 0x00000000
229#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
230#define CONFIG_SYS_BANK0_ENABLE 1
231#define CONFIG_SYS_BANK1_START 0x00000000
232#define CONFIG_SYS_BANK1_END 0x00000000
233#define CONFIG_SYS_BANK1_ENABLE 0
234#define CONFIG_SYS_BANK2_START 0x00000000
235#define CONFIG_SYS_BANK2_END 0x00000000
236#define CONFIG_SYS_BANK2_ENABLE 0
237#define CONFIG_SYS_BANK3_START 0x00000000
238#define CONFIG_SYS_BANK3_END 0x00000000
239#define CONFIG_SYS_BANK3_ENABLE 0
240#define CONFIG_SYS_BANK4_START 0x00000000
241#define CONFIG_SYS_BANK4_END 0x00000000
242#define CONFIG_SYS_BANK4_ENABLE 0
243#define CONFIG_SYS_BANK5_START 0x00000000
244#define CONFIG_SYS_BANK5_END 0x00000000
245#define CONFIG_SYS_BANK5_ENABLE 0
246#define CONFIG_SYS_BANK6_START 0x00000000
247#define CONFIG_SYS_BANK6_END 0x00000000
248#define CONFIG_SYS_BANK6_ENABLE 0
249#define CONFIG_SYS_BANK7_START 0x00000000
250#define CONFIG_SYS_BANK7_END 0x00000000
251#define CONFIG_SYS_BANK7_ENABLE 0
wdenkc6097192002-11-03 00:24:07 +0000252
253/*
254 * Memory bank enable bitmask, specifying which of the banks defined above
255 * are actually present. MSB is for bank #7, LSB is for bank #0.
256 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200257#define CONFIG_SYS_BANK_ENABLE 0x01
wdenkc6097192002-11-03 00:24:07 +0000258
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200259#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */
wdenkc6097192002-11-03 00:24:07 +0000260 /* see 8240 book for bit definitions */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200261#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
wdenkc6097192002-11-03 00:24:07 +0000262 /* currently accessed page in memory */
263 /* see 8240 book for details */
264
265/* SDRAM 0 - 256MB */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200266#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
267#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
wdenkc6097192002-11-03 00:24:07 +0000268
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200269#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
270#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
wdenkc6097192002-11-03 00:24:07 +0000271
272/* PCI memory space */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
274#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
wdenkc6097192002-11-03 00:24:07 +0000275
276/* Config addrs, etc */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200277#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
278#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
wdenkc6097192002-11-03 00:24:07 +0000279
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200280#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
281#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
282#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
283#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
284#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
285#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
286#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
287#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
wdenkc6097192002-11-03 00:24:07 +0000288
289/*
290 * For booting Linux, the board info and command line data
291 * have to be in the first 8 MB of memory, since this is
292 * the maximum mapped by the Linux kernel during initialization.
293 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200294#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenkc6097192002-11-03 00:24:07 +0000295
296/*
297 * Cache Configuration
298 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200299#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */
Jon Loeligeracf02692007-07-08 14:49:44 -0500300#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200301# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
wdenkc6097192002-11-03 00:24:07 +0000302#endif
303
304
305/*
306 * Internal Definitions
307 *
308 * Boot Flags
309 */
310#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
311#define BOOTFLAG_WARM 0x02 /* Software reboot */
312
313
314#endif /* __CONFIG_H */